uvc - ozone - heating - aeration - SIBO

Aeration 20 Dosatech 1 Ozone Generator 8 Solar panels 11 

Air pumps 18 Hanna instruments 26 Ozone Redox UVC 9 Teco heaters/coolers 15 

Airhose 21 Heat pumps 12 Parts UVC-units 6 Teststrips 25 

Bio UV lamps 2 Heating 11 Professional UVC-units 2 UVC-units 2 

Delta UV lamps 2 Ozone Cell 10 

Doornhoek 3950 

5465 TC Veghel 

OZONE - UVC - HEATING - AERATION 

page 1 page 2 page 2 page 3 page 3 page 5 page 6 page 7 page 7 page 8 page 9 

page 11 page 12 page 13 page 14 page 15 page 15 page 16 page 17 page 17 

page 18 page 18 page 18 page 18 page 18 page 19 page 19 page 19 page 19 

page 20 page 21 page 21 page 22 page 23 page 23 page 24 page 24 

page 25 page 26 page 27 page 27 page 28 page 28 page 29 

Tel: +31 (0) 413-29.39.18 

Fax:+31 (0) 413-29.38.01 

E-mail: sales@sibo.nl 

March 2011 

K.v.K. ‘s-Hertogenbosch 160.70.577 

VAT nr. NL8108.72.626B01

UVC - OZONE - HEATING - AERATION 

Retail prices excl. VAT 

6 - 1 

DOSATECH 

1UVC DOSATECH - OZONE - HEATING - AERATION 

AQUAFORTE DOSATECH DOSAGEPUMP code 843 

The Dosatech is the ideal peristaltic pump for the dosing of a liquid solution into the piping system of your pond. 

A dosage of up to 60ml an hour is possible. In addition, it is possible to change the dosage every hour by operating the push 

button underneath the display. 

A big advantage of small daily dosages of living bacterial products (like Microbe-Lift Clean & Clear) compared to bigger monthly dosages is 

the so called ‘Yakult/Actimel effect’. With larger monthly dosages the bacteria that don’t find food will die. With small daily dosages more than 

30 different species of living bacteria will enter the pond looking for food. The Dosatech can be used for dosing any liquid product like anti 

blanket weed products, phosphate binders, Ph+/Ph-products, etc. The neoprene hose makes it possible to add various types of solutions to 

the water of your pond. 

Benefits: 

- Dosage of up to 60 ml an hour, dosage separately adjustable for each hour. 

- Digital indication when the pump head needs replacing (after 6000 hours). 

- Easy to install thanks to the compact design. 

- Neoprene hose and suction and injection nipples supplied. 

- Simple installation and maintenance. 

- 2 Year warranty on manufacturing faults. 

DosaTech comes with: 

Neoprene hose, suction and injection nipples. 

TYPE ARTNR. GBP 

Dosatech dosage pump SL230 83,30 

Pump head dosage pump SL232 19,55 

(2) clamp saddle 50 x 1” AL220 1,32 

(2) clamp saddle 63 x 1” AL226 1,83 

(4) Socket nipple 3/8” x 1” AC303 1,15 

Pond water 

1 = injection nipples with 3/8” male threaded. 

2 = clamp saddle for easy installation 

3 = suction nipple in liquid (e.g. bacteria) 

4 = socket nipple 1” male thr. x 3/8” fem.thr. 

AQUAFORTE UV-C TIMER DOSATECH code 843 

The UV-C Timer DosaTech is a unique product in the pond market: it combines an effective T5 UV-C unit with the new 

AquaForte Dosatech dosage pump! Also the UV lamp has a timer function which allows you to switch the lamp on/off per 

hour and keeps count for the amount of hours the lamp has been used to indicate the time of replacement. 

Why dosage? 

A big advantage of small daily dosages of living bacterial products (like Microbe-Lift Clean & Clear) compared to bigger monthly dosages is the 

so called ‘Yakult/Actimel effect’. With larger monthly dosages the bacteria that don’t find food will die. With small daily dosages more than 30 

different species of living bacteria will enter the pond looking for food. The Dosatech can be used for dosing any liquid product like anti blanket 

weed products, phosphate binders, Ph+/Ph-products, etc. The neoprene hose makes it possible to add various types of solutions to the water 

of your pond. 

Benefits: 

- Build-in electronic ballast 

- Integrated adjustable hour counter for the UV-C lamp 

- Indication when the lamp (after 9000 hours) and dosage pump 

(after 6000 hours) needs replacing. 

- Dosage of up to 60 ml/h, dosage separately adjustable for 

each hour. 

- Controllable on/off status for the UV-C lamp 

- Neoprene hose and suction and injection nipples supplied. 

- 316L stainless steel housing 

- 2 Year warranty on manufacturing faults. 

TYPE ARTNR. GBP MAX. 

VOLUME 

MAX. 

FLOW 

UV-C Timer DosaTech 40watt SL240 277,00 40m³ 15m³/h 

UV-C Timer DosaTech 75watt SL241 302,00 75m³ 20m³/h 

Pump head dosage pump SL232 19,55 - - 

(2) clamp saddle 50 x 1” AL220 1,32 - - 

(2) clamp saddle 63 x 1” AL226 1,83 - - 

(4) Socket nipple 3/8” x 1” AC303 1,15 - - 

1 = injection nipples with 3/8” male threaded. 

2 = clamp saddle for easy installation 

3 = suction nipple in liquid (e.g. bacteria) 

4 = socket nipple 1” male thr. x 3/8” fem. thr. 

Pond water 

March 2011

UVC - OZONE - HEATING - AERATION PROFESSIONAL UVC-UNITS 

PROFESSIONAL UVC-UNITS 

BIO-UV PROFESSIONAL UVC-UNITS WITH CE-CERTIFICATION code 805 

These UVC units are made of a high quality stainless steel (316L) and have an 

unequalled performance at high flow rates. The 150 mm diameter of the housing 

assures a minimum exposure of 2 seconds to UV radiation at the recommended flow 

rates (see table). Due to the use of special "High Intensity" UV lamps with an output 

of 30.000 micro Watt (25.000 after 13000 hours) and the minimum exposure of 2 sec, 

they kill microscopic algae as well as 99.9% of harmful bacteria and viruses, including 

Aeromanas, Pseudomonas and Legionella! 

The type of BIO-UV lamp should be based on an effective flow rate per hour, 

provided by the pump, rather than on the volume of the pond. BIO-UV lamps are 

used instead of chlorine for disinfection of swimming pools. 

- Maximum continuous pressure: 3 bar, maximum water temperature 40ºC. 

- 13000 Hours of effective use (performance is measured after 13000 hours of use). 

- 2 Year warranty. 

TYPE ART. 

NR. 

March 2011 

GBP WATT MAX. 

FLOW 

UV 

EXPOSURE 

TOTAL 

HEIGHT 

KG Ø VOLUME IN/OUT 

BIO UV10 SB650 797,00 38 7 m³/h 2,8 sec. 42 cm 7,6 15 cm 6,4 litre 50 mm 

BIO UV20 SB652 1039,00 59 14 m³/h 2,6 sec. 69 cm 9 15 cm 11,7 litre 50 mm 



TYPE ARTNR. GBP TYPE ARTNR. GBP 

Replacement lamp UV10 SB660 102,00 Replacement quartz sleeve UV10 SB665 86,70 




DELTA UV PROFESSIONAL STAINLESS STEEL UVC-UNITS code 840 

A new series of professional Stainless Steel UVC-units for ponds, pools, whirlpools etc. 

Exclusive features include a 316 Stainless Steel housing that allows for 360° rotation of 

the inlet and outlet unions for ease of installation. Another key exclusive features not 

commonly found in similar units is the inclusion of unions at each end of the Stainless 

Steel housing, which allows the total disassembly of the Stainless Steel housing to 

facilitate cleaning of the quartz tube, should it be necessary. 

Like all Delta Ultraviolet systems, Delta's proprietary High Output (HO) low pressure 

lamp is capable of 30,000 µ/sec./cm2 (25.000 output at lamp end-of-life) when design 

flow rates are maintained. This is the same requirement for Class A drinking water. The 

long life lamp is rated at 13000 hours of continuous use (approximately 1 year). 

EA-3H model: 3 inch (Ø76mm), High Output. EA-4H model: 4 inch (Ø100mm), 

High Output. 2 Year warranty. 

TYPE ARTNR. GBP WATT MAX. 

FLOW 

LENGTH X 

DIAMETER 

IN/OUT 

EA-3H-5 SB630 391,00 30 3,6 m³/h 45 x 7,62 cm 63mm 

EA-3H-15 SB631 421,00 55 7,5 m³/h 63 x 7,62 cm 63mm 

EA-4H-10 SB636 489,00 55 10 m³/h 63 x 10,16 cm 63mm 

EA-4H-20 SB637 552,00 90 13 m³/h 99 x 10,16 cm 63mm 

EA-4H-40 SB638 595,00 110 15,6 m³/h 117 x 10,16 cm 63mm 

TYPE ARTNR. GBP TYPE ARTNR. GBP 

Replacement lamp EA-3H-5 SB640 61,30 Replacement quartz sleeve EA-3H-5 SB645 109,00 





6 - 2 

Retail prices excl. VAT



6 - 3 

PROFESSIONAL UVC-UNITS 

AQUAFORTE STAINLESS STEEL POWER UV-C T5 code 805 

UV-C unit with stainless steel interior for 35% more output due to reflection. Unit uses T5 lamps for optimal 

performance (9000 hrs). The T5 lamp has a UVC output of 25.000 microwatt. In/outlet 63 mm solvent fittings incl. 

reducer fitting to 50 mm / 1½” fem. thr. Max. working pressure 3 bar. 2 years warranty on factory production faults. 

Controls the growth of fungi, bacteria and algae. Suited for ponds & swimming pools. 


POND 

MAX. 

FLOW 

Power UV 40 watt T5 SB620 202,00 35 m³ 15 m³/h 

Power UV 75 watt T5 SB621 218,00 70 m³ 20 m³/h 

Replacement lamp 40watt SB618 43,35 - - 

Replacement lamp 75watt SB619 59,10 - - 

Quartz sleeve 40/75 SB688 37,60 - - 

T5-LAMP 

AQUAFORTE SUBMERSIBLE UV-C UNIT code 805 

Submersible UV-C lamps have a big advantage compared to conventional UV-C units: no pressure loss! 

These lamps can be used in filter tanks so the water can pass without any resistance/pressure loss. 

NOTE: the UV-C radiation range is limited (dependant on i.e. the water clarity) so only a part of the water flowing 

by is treated. The user himself is responsible for the dangers of exposure to UV-C radiation to the eyes! 

Use the supplied safety glasses and/or a safety switch that automatically switches the lamp off when you have access to the lamp. 

The submersible UV-C is easy to install with a Ø32mm table duct tank connector. A Ø43mm hole is sufficient to mount this connector 

(1¼” male thr.). This connector can cover a wall thickness of 42mm. The plastic end of the lamp has a 32mm diameter so you can use 

32mm pipe clips to mount the lamp in a tank. Total length of the lamp (40 & 75 watt) is 100cm. The T5 lamp has a 9000 hours lifespan 

and a 25.000 microwatt output. 

The lamps are supplied with 10 meters of cable and a connector for the electronic ballast. The complete lamp with quartz sleeve, and 

cable (= replacement set) must be replaced at the end of the lamp’s lifetime, since the unit comes in a waterproof housing. 


Submersible UVC 40 watt T5 SB782 153,00 

Submersible UVC 75 watt T5 SB783 164,00 

Replacement set 40 watt T5 SB784 79,60 

Replacement set 75 watt T5 SB785 84,15 

Table duct connector Ø32mm AG315 5,75 

UV-C PRO INOX TIMER code 805 

Professional UV-C unit in stainless steel housing. Max. pressure: 3 

bar. Flow switch (amalgam version) will switch off the lamp when 

there is insufficient flow. Build in timer allows you to switch the lamp 

on/off per hour and keeps count for the amount of hours the lamp 

has been used to indicate the time of replacement. Length: 100cm, 

Ø120mm. 2 years warranty. 2” male thr. connections. 


POND 

MAX. 

FLOW 

UVC PRO Inox T5 75 watt SB795 680,00 70 m³ 20 m³/h 

UVC PRO Inox Amalgam 130 watt SB796 924,00 150 m³ 35 m³/h 

Replacement lamp 75 watt T5 SB692 70,20 - - 

Replacement lamp 130 watt Amalgam SB693 228,00 - - 

Replacement quartz sleeve T5 75 watt SB688 37,60 - - 

Replacement quartz sleeve 130 watt Amalgam SB694 36,80 - - 

Stainless 

Steel 

T5-LAMP 

AMALGAM 

March 2011

UVC - OZONE - HEATING - AERATION PROFESSIONAL UVC-UNITS 

PROFESSIONAL UV-C UNIT WITH 110MM CONNECTION code 805 

The first professional UV-C unit with 110mm connections! Ideal for gravity systems and low pressure pumps to reduce head pressure 

losses! UV-C unit with stainless steel interior for 35% more output due to reflection. Unit comes with a T5 or amalgam lamp for optimal 

performance. 2 Years warranty. Flow switch (amalgam version) will switch off the lamp when there is insufficient flow. 

March 2011 


POND 

6 - 4 

MAX. 

FLOW 

Ø110mm T5 75 watt SB697 359,00 70 m³ 20 m³/h 

Ø110mm Amalgam 130 watt SB698 714,00 150 m³ 35 m³/h 

Replacement lamp 75 watt T5 SB692 70,20 - - 


Replacement quartz sleeve T5 75 watt SB688 37,60 - - 

Replacement quartz sleeve130 watt Amalgam SB694 36,80 - - 

Ø110mm ! 

T5-LAMP 

AMALGAM 

JUMBO KOI STAINLESS STEEL UV-C 150.000 AMALGAM WITH FLOWSWITCH code 805 

Works with 1 Amalgam lamp (130 watt) with a radiation output of 50 Watt. Suited for ponds up to 150.000 liter. Pump speed max. 

20m³/h. Incl. 50/63mm solvent fittings. 

Flow switch (amalgam version) will switch off the lamp when there is insufficient flow. 2 years warranty. 

TYPE ART. 

NR. 

GBP MAX. 

POND 

MAX. 

FLOW 

Jumbo Koi 150.000 Amalgam 130 watt SB679 683,00 150m³ 20m³/h 


Replacement quartz sleeve 130 watt Amalgam SB694 36,80 - - 

Flowswitch 

AMALGAM 



6 - 5 

UVC-UNITS 

UVC-UNITS 

AQUAFORTE UV-C LAMPS WITH PL LAMP code 805 

AquaForte introduce competitive priced UV-C lamps with 

PL lamp. Housing has a special “quick lock” connection 

for easy quartz sleeve cleaning. Fitted with 4 connections: 

3 hose tail connections 20/25/32/40mm and a UV sight 

glass. 


VOLUME 


MAX. 

FLOW 

18 watt PL UV-C unit SB800 67,15 10m³ 5m³/h 



PL-LAMP 

ECONOMY UV-C UNIT (PL LAMP) code 805 

ABS shell, 3 metres of cable, very low price! Incl. hose tail. 


POND 

MAX. 

FLOW 

5 watt Economy SB808 40,65 2.5m³ 1.250 litre/h 

9 watt Economy SB810 42,45 7m³ 3.5m³/h 

11 watt Economy SB812 44,25 10m³ 5m³/h 

PL-LAMP 

MULTIMAX UV-C UNIT WITH PL LAMP code 805 

Integrated ballast. Stainless steel sleeve, no more erosion. 5 year warranty. 


POND 

MAX. 

FLOW 

Multimax 5 watt SB827 65,80 2.5m³ 1.25m³/h 

Multimax 9 watt SB828 70,10 7m³ 3.5m³/h 

Multimax 11 watt SB829 73,85 10m³ 5m³/h 

PL-LAMP 

UVC PROFESSIONAL WITH PL LAMP code 805 

Stainless Steel housing, electronic ballast. Comes with 63mm PVC 

unions. Including fittings 63/50-1½” fem.thr. and hose tails 1½” - 25/32/ 

40. 2 Years warranty on manufacturing faults. 


POND 

MAX. 

FLOW 

UV-C Professional 18 Watt SB805 129,00 20m³ 10m³/h 



PL-LAMP 

UVC TL+ STAINLESS STEEL HOUSING code 805 

Stainless Steel housing, electronic ballast. 1” fem.thr. connections, 

incl. hose tails 9-32mm. 2 Years warranty on warranty faults. 


POND 

MAX. 

FLOW 

UV-C+ 10.000 15 watt SB861 95,45 10m³ 5m³/h 

UV-C+ 20.000 25 watt SB863 101,00 20m³ 8m³/h 

UV-C+ 30.000 30 watt SB857 127,00 30m³ 10m³/h 

UV-C+ 55.000 55 watt SB859 157,00 50m³ 10m³/h 

TL-LAMP 

March 2011

UVC - OZONE - HEATING - AERATION SPARE PARTS UVC-UNITS 

SPARE PARTS UVC-UNITS 

T5 LAMPS code 805 

Overview of the various models of T5 lamps that are currently on the market 

for various models UVC lamps. 

TYPE MODEL ARTNR. GBP 

A T5 for AquaForte Power UVC 40 watt SB618 43,35 

A T5 for AquaForte Power UVC 75 watt SB619 59,10 

B T5 for Jumbo Tech UVC 40 watt SB600 43,35 

B T5 for Jumbo Tech UVC 75 watt SB601 59,10 

A T5 for AquaForte Ozone Redox UVC (low & high pressure) SB610 86,70 

C T5 for Turbo³ Ozone UVC (low & high pressure) SB602 86,70 

D T5 for i.e. Jumbo Koi 16 watt (standard Philips T5) SB690 30,05 



March 2011 

6 - 6 

A 

B 

C 

D 

T5-LAMP 

UV-C TL LAMPS code 805 

The SB717 is a High Frequency 55 Watt lamp, specially made for the TMC Pro Clear 55 Watt and the PRO Pond 110. 

BRAND TYPE ARTNR. GBP LENGTH QNT. 

TMC/GE UV-TL 4w SB700 5,50 136mm 25 pieces 



PHILIPS UV-TL 8w SB705 8,00 289mm 25 pieces 

LightTec UV-TL 10w SB706 10,00 330mm 25 pieces 











TMC/GE UV-TL 55w High Frequency SB717 20,55 895mm 10 pieces 

TL-LAMP 

UV-C TL LAMP SET code 805 

Complete set with high quality TL lamp (10.000 working hours!), quartz 

sleeve & O-rings. For optimal results it is better to replace the quartz 

sleeve on a regular basis. A quartz sleeve does wear out and exposes 

already 25% less radiation after 1 year of use! Set is suited for i.e. TMC 

Pro Clear 55. Set comes with: 

- Quartz sleeve Ø30 x 871mm. 

- TL UV-C lamp 30 or 55 watt (10.000 working hours!). 

- Set O-rings. 


Set 30 watt (lamp/quartz sleeve/o-rings) SB751 19,70 

Set 55 watt (lamp//quartz sleeve/o-rings) SB752 21,45 

+ 

+ 

TL-LAMP 



6 - 7 

SPARE PARTS UVC-UNITS 

UV-C PL LAMPS code 805 

BRAND TYPE ARTNR. GBP QNT. 

PHILIPS PL-lamp 5 watt SB836 8,10 10 pieces 

TMC/GE PL-lamp 5 watt SB838 6,85 10 pieces 

Economy PL-lamp 5 watt SB833 5,40 10 pieces 







OASE PL-lamp 24 watt (discount code 722) RD974 33,95 1 pieces 



PHILIPS PL-lamp 36 watt (+ 72 watt) SB843 33,95 25 pieces 


PHILIPS PL-lamp 55 watt (+ 110 watt) SB844 40,65 10 pieces 



PL-LAMP 

QUARTZ SLEEVES TL LAMPS code 805 

TYPE ARTNR. GBP SIZE 

Quartz TMC Model 6 watt SB731 10,35 Ø20 x 185mm 

Quartz TMC Model 8 + 16 watt SB732 11,40 Ø20 x 262mm 

Quartz TMC Model 15/25 watt SB733 16,55 Ø30 x 420mm 

Quartz TMC Model 30/55 watt (Pro Clear / 110) SB734 30,05 Ø30 x 871mm 

O-rings (2 x) for TMC Quartz 6-8-16 watt SB745 1,12 - 

O-rings (2 x) for TMC Quartz 15/25/110 watt SB746 1,12 - 

O-rings (2 x) for TMC Quartz 30/55 watt SB740 1,27 - 

Quartz UVC TL Lamp 10 watt SB866 11,40 Ø31 x 280mm 

Quartz UVC TL Lamp 15/25 watt (not for TMC) SB867 12,45 Ø31 x 385mm 

Quartz UVC TL Lamp 30/55 watt (not for TMC) SB869 22,65 Ø31 x 844mm 

O-rings (2 x) for UVC-TL SB868 3,84 - 

QUARTZ FOR TL-LAMPS 

QUARTZ SLEEVES PL LAMPS code 805 


Quartz 5 watt UVC PL SB847 13,40 




Quartz 36 watt (+ 72 watt) UVC PL SB851 32,65 

Quartz 55 watt (+ 110 watt) UVC PL SB852 43,45 

O-ring for Quartz PL 9 to 55 watt SB845 1,11 

QUARTZ FOR PL-LAMPS 

QUARTZ SLEEVES T5 LAMPS code 805 


Quartz sleeve TL 16 watt T5 SB689 31,05 

Quartz sleeve TL 40/75 watt T5 SB688 37,60 

QUARTZ FOR T5-LAMPS 

March 2011

UVC - OZONE - HEATING - AERATION OZONE 

OZONE 

AQUAFORTE OZONE GENERATOR code 828 

AquaForte introduce a brand new type of ozone generator. The technique used in this generator is extremely 

useful for ponds with bio filters or natural ponds. 

What makes this new technique so special compared to existing systems? 

- Extremely easy and safe operation. 

- Easy to maintain (cleaning without tools!). 

- Fully ‘visible’ operation with an adjustable ozone production of 100 mg to max. 2 gram Ozone (O³) per hour, based on air. 

- Suited for Ozone injection in water as in air. 

- Designed for the use in quarantine tanks and middle sized ponds (15 to 20m³). 

- Ozone application will result in crystal clear water. 

- Low in energy. 

- Robust aluminium waterproof case with long-life ceramic corona modules that do not 

need to be replaced. 

pond 

March 2011 


AquaForte Ozongenerator SK940 880,00 

AquaJet 2000 Venturi SC240 12,35 

for redox meters see page 6-27 

Ozon 

reactor 

ozone 

2 


outlet 

venturi 

1 

Air inlet 

pond water 

Long-life ceramic corona 

modules with visable 

function that can be 

cleaned within 5 minutes, 

without tools! 

Example ozone application 

External air can be entered through the grey hose connector (1). The generator is designed to have the ozone 

sucked out by means of a venturi (2). This is the recommended and most safe way to use the generator and 

prevent the escape of ozone through leakage. Next, the mix of ozone and water has to go through an ozone 

reactor to have the ozone react with organics in the water. 

NEVER INJECT THE OZONE DIRECTLY INTO THE POND OR THE PIPE SYSTEM OF THE POND! 

In special occasions you can use a large, ozone resistant, air stone in the ozone reactor on the ozone side. 

A small air pump is then connected to the air inlet of the generator. Keep in mind that the ozone side has a 

free outlet to prevent an increased air pressure. 

6 - 8 

100% adjustable 

100mg - 2 g 

Ozone out 

Air in 

(6-8mm) 

(8mm) 

Recommended 

flow: 12 l/m 



OZONE 


6 - 9 

OZONE 

AQUAFORTE OZONE REDOX UVC code 805 

The Ozone Redox UVC has a special 75watt T5 UV-C lamp that generates ozone as well as UV-C at the 

same time. The lamp produces 600mg/h ozone and 25.000 microwatt of UV-C 

radiation output. The lamp produces ± 4000 hrs ozone & 

± 9000 hrs of UV-C radiation. The Low Pressure version 

comes with an airpump that “pushes” the ozone out of the 

unit and a “static mixer” that mixes the ozone with water with 

virtually no pressure loss. This Low Pressure version must 

be fitted after the filter installation (free return flow). The High 

Pressure version operates through a venturi injection system 

Airpump 

with a ballvalve to mix the ozone with water. Inlet/outlet is 

63mm. Max. flow ± 20m³/h. 

outlet 


inlet 

Ozone Redox UVC Low Pressure version 

incl. airpump & static mixer 

SB612 552,00 

Ozone Redox UVC High Pressure version 

incl. venturi & ballvalve injection system 

SB613 510,00 

Replacement Ozone UVC lamp (75 watt) SB610 86,70 

Replacement quartz sleeve for Ozone Redox 

SB611 25,40 

HINT: The optimal life-span of the T5 lamp regarding UV-C is 

± 9000 hrs. For the ozone producing part this is about 4000 hrs. 

After this period of time the intensity decreases. When you replace 

the lamp in March there will be enough ozone-production 

for the whole season (from March to September) and there will 

be enough UV-C radiation for a whole year! 

For redox meters see page 7-29 

Low Pressure 

Static 

mixer 

outlet 

High Pressure 

PARTS OZONE LAMPS code 805 

Overview of various parts for ozone lamps, that are currently on the market. 

TYPE MODEL ARTNR. GBP 

A T5 for AquaForte Ozone Redox UVC (low & high pressure) SB610 86,70 

B T5 for Turbo³ Ozone UVC (low & high pressure) SB602 86,70 

- Replacement quartz sleeve for Ozone Redox Unit SB611 25,40 

STATIC MIXER code 805 

A 

B 

inlet 

Venturi 

The “static mixer” comes with standard 8 mm air hose connectors and can instantly be connected to the existing air supply. The “static 

mixer” mixes the air with the water flow. The Stainless steel blades assure an optimum mix of air with the water due to the circulation of 

the water. Also these blades “smash” big air bubbles, into smaller air bubbles which ensures better oxygen absorption. The static 

mixer has a relatively low resistance so that economical pumps can be used. Optimum flow 8 - 12m³/hour. 

TYPE ARTNR. GBP MAX. FLOW Ø LENGTH 

Static Mixer SB614 88,45 48m³/h 75mm 65 cm 

March 2011

UVC - OZONE - HEATING - AERATION OZONE 

AQUAFORTE KOIZO³ OZONE CELL code 843 

The worlds 1st ultra compact low-voltage ozone generator for reducing algae & germs 

Ozone has traditionally been a topic of hot debate among professional koi keepers. The fact is that ozone possesses 

loads of highly valuable characteristics, it removes colourants from the water; it converts toxic nitrite into relatively 

harmless nitrate; it removes bacteria, viruses and other pathogens; it kills green algae; and it raises the oxygen content of the water. 

To date, however, ozone has been prohibitively expensive. Nor has its use been 100% safe. Conventional ozone generators produce 

ozone from the oxygen in the air. In order to do its job, the ozone then needs to be mixed with water, in a process that requires a huge 

amount of energy. Because some of the ozone goes to waste, the generator produces more ozone than is strictly required, to make 

sure that enough of it reacts with the water. As a result, too much ozone may end up in the pond water - a dangerous overdose for the 

fish living in the pond. In order to prevent this, a second unit needs to be installed alongside the ozone generator that is capable of 

breaking down the excess ozone. All in all, it's a process that is not just pretty complex, but extremely expensive to boot. Alternatively, 

ozone can be produced with the aid of UV lamps like a UVOX lamp. It does have the advantage, though, of being less dangerous than 

generator-based production, although it still involves producing ozone from air. 

The AquaForte KOIZO³ Ozone Cell, on the other hand, produces ozone from water! 

A process of electrolysis is used to break down water into its two component parts: oxygen and hydrogen. The Ozone Cell also 

releases single oxygen atoms (i.e. O rather than O2 atoms) that instantly combine with oxygen molecules (O2) to form ozone (i.e. O3). 

Ozone is a highly reactive substance and tries to revert straightaway to its original form, thus causing the extra oxygen atom to react 

with an organic substance such as nitrite, a colourant, algae or a virus, which are then ‘incinerated’ by oxidation. The substance that 

remains after this oxidation process is pure oxygen. The ozone leaves the Micro Ozone Cell in the form of tiny bubbles of gas. This is 

the great advantage of a successful waterbased reaction: the smaller the particles, the better. 

Benefits of the KOIZO³ OZONE-CELL 

• Slow development of an increased redox-potential – optimum levels of all water parameters are maintained through the continuous 

presence of oxygen. 

• Permanent micro-disinfection prevents a one-sided increase of e.g. pathogenic germs like Aeromonas salmonicidae, that have a 

detrimental effect on the equal expansion of an aerobe environment. 

• No immediate threat to fish from increased ozone input compared to an ozone generator with electrical discharge. 

• Toxic reactions from overdose levels do not occur. 

• No surplus ozone produced. 

• No personal risks in enclosed filter areas, as tolerated levels are never achieved. 

• Capacity can be adapted according to pond size by using multiple OZONE-CELLS. 

• Maintenance, requires only the replacement of the cell cores. 

• This method of ozone production does not require dried air which produces sulphuric acid in the electrode chamber that often causes 

the pH to drop into the acid range. 

• Ozone produced by electrolysis is highly efficient and effective. 

The Ozone Micro Cell is supplied with a Soft Water Module. This unit has to be filled with distilled/deionized water. The cell core is 

fitted directly into the module so the cells are only in contact with pure water. The ozone produced leaves the module through a small 

stainless steel capillary pipe that holds an ozone hose. This ozone hose has a 3/8" fitting to connect with the pond pipe system to 

perform its oxidizing cycle. The only maintenance required is refilling the module with distilled water. The life-span of the ozone cells 

in this module is extended to at least one year! An additional benefit is the user can see the cell continuously at work by means of 

the rising ozone bubbles. 

The Soft Water Module is supplied with a handy wall bracket for easy installation. The Ozone Micro Cell KOIZO³ 4 Cells is now 

standard equipped with this module. 


ozone gas 

Soft Water Module for Ozone Micro Cell SL218 85,80 

KOIZO³ 4 cells incl. Soft Water Module SL224 428,00 

capilllary 

Cell Core Replacement Set (4 pieces) SL226 57,80 


March 2011 

6 - 10 

fitting 

distilled 

water 


micro cell 

ozone bubbles 

pond water 




6 - 11 

HEATING 

HEATING 

OKU POOL SOLAR PANELS code 809 

You know the problem: a swimming pool/pond without extra heating is only pleasantly warm for about 3 to 4 weeks during the summer 

- a very short amount of time compared to the high investment and high maintenance a pool requires. An indoor pool even needs to be 

heated the complete year, which, considering the conventional energy sources, costs a lot of money and is not very environmental 

friendly. There is an other possibility! The heating of pools is the perfect application for the free and environmental friendly solar 

energy. Because no high temperatures are needed, but relatively a large amount of water needs to be heated, it is very effective to 

operate these installations at a high flow rate and on a relatively low temperature. OKU collectors are moulded in one peace and are 

colored homogeneous black. The system can normally be used with the existing filter pump. Corrosion and pool water resistant. The 

(pool)water is pumped directly through the collectors. OKU collectors are frost resistant and can hold human weight. 

There are 3 easy connection variations: 

1. with the filter pump over a automatic 3-way ball valve with thermostat. 

2. with an own pump and thermostat in a circular flow. 

3. with an own pump, thermostat and plumbing, disconnected from the filter system. 

See table on the right for the recommended collector size in 

% of the pool size for outdoor pools with covers or indoor 

pools (beginning of may up to september). Temperature 

increase 4 - 7°C in comparison with not heated pools. Without 

a cover the collector size ought to be 50% bigger. The local 

differences in hours of sun per day can in- or decrease the 

collector size with 20%. 

Pumps: recommended flow rate is 150 up to 250 liters per m² 

collector surface per hour. The recommended capacity of the 

pump can be easily calculated: the collector surface x 200 

liters. The pressure loss can be determined by taking the 

difference in height between the water level and collectors 

and add 5 metre. 

D ire c tio n o f in c lin a tio n 

Angle of inclination E SE S SW W 

90° 90 80 70 75 85 

60° 80 65 55 60 70 

45° 70 60 50 55 65 

30° 60 55 45 50 55 

15° 55 50 50 50 55 

0° 50 50 50 50 50 

Absorber area in % of Pool surface 

Technical specifications 

Very low pressure loss: ± 0,003 bar at 200 liters/hour per m². 

Flow rate: 150 - 250 liters/hour per m². 

Weight: app. 6 kg/m² - water volume 6 liters/m². 

Max. press.: 4,5 bar. Operating press.: 1,2 bar at 40°C. 

Output: up to app. 85% - capacity up to 0,85 Kwh/m². 

Average output: 0,5 - 0,6 Kwh/m². 

Temperature resistant from -50°C up to +115°C. type 1000 type 1001 type 1002 

TYPE ARTNR. GBP SIZE (L x W) M² SIZE 

Type 1000 with integrated collector tube Ø40mm and 2 connections Ø25mm SC600 97,75 1320mm x 820mm 1,08m² 

Type 1001 with 4 connections Ø25mm SC602 97,75 1320mm x 820mm 1,05m² 

Type 1002 with integrated collector tube Ø40mm on both small sides SC604 97,75 1320mm x 820mm 1,12m² 

Thermostat DIGISOL SC610 230,00 - - 

* 3-way ball valve with 230V servo-engine (* Ask for availability) SC612 357,00 - - 

Connection hose 25x3 x70 mm with 2 Stainless Steel hoseclips SC614 3,28 - - 

Connection hose 38x5 x60 mm with 2 Stainless Steel hoseclips SC616 2,98 - - 

Air release valve for solar panel SC618 11,50 - - 

March 2011

UVC - OZONE - HEATING - AERATION HEATING 

AQUAFORTE DURATECH HEAT PUMPS code 810 

HIGHLY EFFICIENT AND ECONOMICAL 

The energy is collected from the air outside and transferred to the pool water. For each kW consumed by the DURATECH® heat 

pump, 4 to 5 kW are returned to the pool.The DURATECH® heat pump has to be installed outside and will even work with outside 

temperatures as low as -5°C. DURATECH® heat pumps are less harmful to the environment because 80% of the energy produced is 

collected from the outside air and therefore purely natural. Also the gas used, R407C, has no harmful effect on the ozone layer. 

CONSTRUCTED FOR DURABILITY AND LONGEVITY - Using advanced and high quality materials like PVC and “Duranium®” for 

the heat exchanger means it can resist to erosion from chlorine in the water. Also, the “Duranium®” heat exchanger is oversized to 

improve efficiency. 

EASY INSTALLATION - The unit is intelligently designed and remarkably compact for easy installation. Example: The integrated flow 

switch will sense the water flow and automatically start the heater when the pool pump starts and stop it when the pump shuts off. 

ADVANCED CONTROL - The integrated microprocessor monitors all the sensors and controls the device without any intervention of 

the user. Electronic display and control with easy operation is standard. 

RUNNING QUIETLY - The use of a high efficient, low sound rotary or scroll compressor, a low noise fan and an oversized heat 

exchanger, makes the unit to be extremely quiet in operation. 

* Ask for availability. 

TYPE ARTNR. GBP VOLT WATT CAP. 

Dura 7 SC656 1487,00 240 1,4kW 7kW 

Dura 10 SC657 1996,00 240 2kW 10kW 

Dura 13 SC658 2461,00 240 2,6kW 13kW 

Dura 18 SC659 3563,00 240 3,6kW 18kW 

Dura 22 SC660 4204,00 240 4,4kW 22kW 

*Dura 22T SC661 4161,00 380 4,4kW 22kW 

*Dura 26T SC662 4551,00 380 5,2kW 26kW 

model DURA 7 DURA 10 DURA 13 DURA 18 DURA 22 DURA 22T DURA 26T 

heating capacity kW 7 10 13 18 22 22 26 

BTU/h 24000 34000 44500 61500 75000 75000 89000 

power input kW 1,3 1,82 2,36 3,3 4,1 4,1 4,18 

C.O.P. 5,5 5,5 5,5 5,5 5,5 5,5 5,5 

maximum volume m3 30 40 60 80 90 90 120 

nominal current A 6,6 9,2 12,1 16,5 20,9 7,1 8,9 

maximum current A 6,6 9,3 13,4 18,7 21 7,9 9,5 

peak current A 24 35 45 61,5 75,5 35,8 43,2 

power supply V/Ph/Hz 220-240/1/50 220-240/1/50 220-240/1/50 220-240/1/50 220-240/1/50 380/3/50 380/3/50 

number of compressors 1 1 1 1 1 1 1 

compressor type rotary rotary rotary scroll scroll scroll scroll 

refrigerant R407C R407C R407C R407C R407C R407C R407C 

amount of refrigerant Kg 0,9 1,2 1,9 2,0 2,2 2,2 2,4 

pressure gauge yes yes yes yes yes yes yes 

number of fans 1 1 1 1 1 1 1 

fan power W 25 30 60 200 200 200 200 

rotational frequency of the fan RPM 950 950 950 830 830 830 830 

m3 /h 1800 2100 2300 3200 4500 4500 4500 

fan direction horizontal horizontal horizontal vertical vertical vertical vertical 

noise dB (A) 51 52 54 57 58 58 58 

water connection mm 50 50 50 50 50 50 50 

m3 UNIT 

/h 3-5 5-7 6-8 8-10 10-12 10-12 11-13 

max. water pressure drop kPa 12 15 15 16 16 16 16 

net dimensions (L/W/H) mm 950/360/580 1010/370/615 1130/470/680 660/660/860 660/660/960 660/660/960 660/660/960 

shipping dimensions (L/W/H) mm 1060/380/600 1140/400/680 1180/485/780 700/740/1010 700/740/1110 700/740/1110 700/740/1110 

net weight/shipping weight Kg 54/57 63/67 99/104 108/120 111/123 111/123 112/125 

Measurement conditions: outdoor air temp.: 25°C inlet watertemp.: 25°C. 

Values based on isolated walls and covering at night. 

March 2011 

Dura 7 Dura 10/13 

DURATECH® heat pumps can save you up to 80% in operating costs! 

The heat pump can pay for itself in just a few years with the operation costs savings. 

Suited for salt water and chlorinated water! 

6 - 12 

Dura 18/22/26 




6 - 13 

HEATING 

AQUAFORTE DURA PLUS HEAT PUMPS code 810 

The new series Heat Pumps DURA+ are ultra quiet and have a ground breaking high efficiency with COP above 6. They keep 

this high efficiency also at lower outside air temperatures, this makes them also the first choice for the heating of indoor pools. 

They have a working range from -10°C till 40°C. Since they all have cooling, they also are well suited for heating and cooling in 

hot climates. They work with the gas R410a. 

FEATURES: 

- High efficiency coefficient of up to 6. 

- Automatic defrost function. 

- Two speed ventilator for very low noise running. 

- For heating and cooling. 

- With R410a for an environment friendly operation and higher efficiency 

- Cabinet in corrosion proof material. 

- Titanium Heat exchanger resistant to salt and chlorine. 

- All functions are microprocessor controlled. 

- High efficiency at low outside temperatures. 

- Quiet running with low sound rotary and scroll compressors, low noise fan. 


TYPE ARTNR. GBP VOLT WATT CAP. 

Dura+7 SC664 1781,00 240 1,4kW 7kW 

Dura+10 SC665 2593,00 240 1,71kW 9,8kW 

Dura+14 SC666 3226,00 240 2,46kW 14,3kW 

Dura+19 SC667 4420,00 240 3,44kW 19,6kW 

*Dura+22T SC668 4760,00 380 3,67kW 22kW 

*Dura+30T SC669 5865,00 380 5kW 30kW 

The heat pump can pay for itself in just a few years with the operation costs savings. 

Can be used as cooler/chiller! Suited for salt water and chlorinated water. 

Model DURA+7 DURA+10 DURA+14 DURA+19 DURA+22T DURA+30T 

Heating Capacity 

kW 7 9,8 14,3 19,6 

22 30 

Lucht: 25°C / Water: 25°C BTU/h 23900 33450 48500 66500 

75000 102000 

Heating Capacity 

kW 6,8 9,5 13,5 18,6 

20,7 28,0 

Lucht: 15°C / Water: 25°C BTU/h 23100 32400 46000 63500 

70600 95500 

Cooling Capacity 

kW 5,2 7,6 12,0 16,4 

17,6 24 

Air: 25°C / Water: 25°C BTU/h 17700 26000 41000 56000 

60000 82000 

Power Input kW 1,2 1,71 2,46 3,44 

3,67 5,0 

Performance L25/W25 C.O.P. 5,8 5,7 5,8 5,7 

95 130 

Performance L15/W25 C.O.P. 5,3 5,25 5,3 5,25 

6,1 8,3 

Maximum volume m3 30 40 60 80 

7,1 9,5 

Running Current A 5,22 7,43 10,7 14,96 

6,0 6,0 

Max Running Current A 6,5 9,3 13,4 18,7 

5,5 5,5 

Power supply V/f/Hz 220-240/1/50 220-240/1/50 220-240/1/50 220-240/1/50 380/3/50 

380/3/50 

Controller Electronic control 

Electronic control 

Condensor Titanium heat exchanger 

Titanium heat exchanger 

Compressor quantity 1 1 1 1 

1 1 

Compressor type rotary rotary rotary scroll 

Scroll Scroll 

Refrigerant R410a R410a R410a R410a 

R410a R410a 

Pressure gauge Yes 

Yes Yes 

Yes Yes Yes 

Fan quantity 1 1 1 1 

1 1 

Fan Power Input W 120 120 120 120 

215 215 

Fan Speed RPM 850/750 850/750 850/750 850/750 

820/680 820/680 

Air flow 

m3/h 2100/1800 2100/1800 2300/2000 3200/2700 4500/3800 4500/3800 

Fan direction Horizontal horizontal horizontal horizontal 

Vertical Vertical 

Noise dB (A) 50 51 54 54 

57 57 

Water Connection mm 50 50 50 50 

50 50 

Nominal Water Flow m3/h 3 3 4,5 6 

12,5 17 

Water Pressure Drop (max) kPa 10 10 10 10 

40 40 

Unit Net Dimensions (L/B/H) mm 905/420/650 905/420/650 905/420/650 1200/470/850 660/660/960 660/660/960 

Shipping Dimensions (L/B/H) mm 1030/440/700 1030/440/700 1030/440/70 1240/480/900 700/740/1110 700/740/1110 

Shipping gewicht kg 55/60 60/65 77/82 117/128 

112/122 123/133 

Measurement conditions: outdoor air temp.: 25°C, inlet water temp.: 25°C. 

Values based on isolated walls and covering at night. 

DURATECH® heat pumps can save you up to 80% in operating costs! 

DURA PLUS 10/14/19 

DURA PLUS 22T/30T 

March 2011


AQUAFORTE SOLAR SHOWER code 809 

Use the free energy from the sun! 

The Aqua-Forte Solar shower has a capacity of 23 liters. These 23 liters will be heated by the 

sun and can be mixed to a comfortable temperature with the combi-valve. Comes standard with 

a garden hose quick coupling for the supply of tap water. Supplied with 4 mounting bolts for 

concrete flooring. Can also easily be installed on wooden flooring. 

March 2011 


Solar shower 23 litre SC625 183,00 

PROFESSIONAL STAINLESS STEEL HEAT EXCHANGERS FOR PONDS AND SWIMMING POOLS code 809 

Stainless steel heat exchanger with high flow rate and little pressure loss. Should be installed only by competent central heating fitter. 

Not suitable for saltwater. All models have a 1” male thr. connection for hot water and 1½" male thr. connection for pond or swimming 

pool water (only model 230 has a 2” connection). 

TYPE ART. 

NR. 

GBP CAP. WARM 

WATER 

FLOW 

POND 

WATER 

FLOW 

PRESSURE 

LOSS 

SIZE 

W x L x H 

CM 

100 SC538 295,00 29 kW 40 l/m 6,6 m³/h 0,6 MWK 11,5 x 21 x 14 3 

130 SC540 330,00 38 kW 50 l/m 8,4 m³/h 0,75 MWK 11,5 x 34 x 14 4,5 

170 SC541 345,00 50 kW 68 l/m 11,4 m³/h 0,9 MWK 11,5 x 47 x 14 6 

230 SC542 423,00 67 kW 91 l/m 18 m³/h 1,1 MWK 11,5 x 47 x 14 6 

THERMOSTAT code 809 

Thermostat with Stainless steel housing for the control of heat exchangers. 


Thermostat up to 40°C SC530 81,60 

FLOW SWITCH code 809 

This flow switch will turn off a relays or light appliances when there is too little flow. 63mm 

solvent connection. Max. switching power is 80V/A. 

- Minimum flow for switching on: 3.000 ltr/h. 

- At less than 2.700 ltr/h it switches off. 


Flowswitch 63mm SC545 71,40 

6 - 14 

KG 




6 - 15 

HEATING 

PROFI HEATER STAINLESS STEEL POND HEATER code 809 

With thermostat (up to 40º C). includes: 2 hose tails 25/32/40mm and 

PVC fittings 50/63mm. 230V. 

TYPE ARTNR. GBP POND 

VOLUME 

Profi heater 1KW Stainless Steel SC517 153,00 10m³ 



TECO TR - SERIES KOELERS Code 903 

High quality technology, italian style, know-how and unsurpassed TECO quality have contributed to a 

multi-functional unit, which meets all the needs and demands of the user. 

The new products offer the following advantages: 

- New and modern design with compact measurements. Patented titanium exchanger. 

- Easy installation, thanks to the provided taps. 

- 30% increased cooling effectivity, which saves a vast amount of power continuously. 

- Integrable and/or replaceable heater (option). Integrable and/or replaceable UV-C sterilizer (option). 

- Removable air filter for easy and fast maintenance. 

- Obstructed air filter alarm and control. 

- Alarm end of life UV Light. 

- "Silent" a special function which makes the unit work more quiet (not on TR30/60) 

- Quick connector with taps for easy installation with the piping system (not on TR30/60) Model TR 10/15/20 


TYPE ARTNR. GBP WATT IN/OUT SIZE WEIGHT 

TR 10 TB104 447,00 200 16/20mm 430x270x400(h)mm 15 kilo 



* TR 30 TB116 1555,00 850 1” 600x385x560(h)mm 42 kilo 

* TR 60 TB120 2056,00 1400 1” 600x385x560(h)mm 50 kilo 

Model TR 30/60 

TECO TC - SERIES COOLERS / HEATERS Code 903 

Technically the TC series are equal to the TR series. However it is provided with a 

heater and a UV lamp. 

TYPE ARTNR. GBP WATT IN/OUT SIZE WEIGHT 

TC 15 TB110 742,00 400 16/20mm 430x270x400(h)mm 18 kilo 

TC 20 TB114 878,00 480 16/20mm 430x270x400(h)mm 20 kilo 

March 2011


SICCE SCUBA AQUARIUM HEATER code 904 

Fully immersible automatic thermostats designed for use in 

paludariums, turtle tanks and aquariums. Features: 

- Comprehensive line of 4 models (50-300W). 

- 100% Immersible. 

- High standard electronics. 

- Thermostat temperature control (18-32°C). 

- ON/OFF pilot light. 

TYPE ARTNR. GBP LENGTH AQUARIUM 

CAPACITY 

Scuba 50 watt TB360 11,95 25cm 25-50 litre 




FLOATING HEATERS code 809 

Stainless Steel heating element with floater for additional heating or for ice prevention in 

the pond. The element heats the water directly and is not harmful for fish. Including 10 

metres of cable. 

March 2011 


Schego 300 watt, length 25 cm SC510 44,25 

Schego 600 watt, length 35 cm SC509 57,90 

SCHEGO THERMOSTATIC PROTECTION code 809 

This peg-mounted thermostatic sensor has to be placed 

alongside the pond (not in the water!). It is set to activate the 

connected device, such as a pond heater, a circulation pump or 

an air pump, at 0 or 7 °C. The device discontinues after the 

frost. Prevents unnecessary power consumption. Includes 5 

metres cable and peg. 


Thermostatic protection 7ºC SC511 51,55 

Frost protection 0ºC max. 300 watt SC512 46,45 

Frost protection 0ºC max. 600 watt SC513 55,05 

FROST PREVENTION code 806 

Frost prevention device in plastic carrying bag, also available with a connection for a 

pump on a venturi. This in order to keep the pond ice-free by blowing air into it. 


Frost Preventor standard SB304 6,35 

Frost Preventor with venturi SB306 7,85 

6 - 16 




6 - 17 

HEATING 

THERMOMETERS FOR PONDS AND SWIMMING POOLS code 809 

Model “lifebuoy” is a floating thermometer with stainless steel housing. Can be read without removing it from the water. The combithermometer 

can be used as a floating device and as a submerged device. The floating top can be removed. Colour: Blue. 


Lifebuoy -5ºC - +45ºC SC550 15,25 

Combi-thermometer 0ºC - +40ºC SC554 3,28 

THERMOMETER code 363 

- Accurate measuring (0,1ºC), range from -20,0 up to 100,0 °C. 

- MB270 has a ballasted waterproof sensor with 3 mtrs of cable for 

readings at different depths. 

- MB271 has a peg with 1 metre of cable. 

- Easy 0,0°C cal-check. Complete with battery. 


98509-01 MB270 56,35 

98509 MB271 34,55 

DIGITAL THERMOMETER WITH MEASURING PROBE code 809 

- Range: -5°C tot 70°C. 

- Big display, compact size. 

- Measuring probe with 1 metre of cable. 

- Easy to install. 


Digital thermometer SC553 4,21 

SOLAR THERMOMETER code 809 

Floating thermometer on solar power with digital display! 

Range 0° - 50 °C. 


Solar Thermometer SC555 16,45 

MB270 

March 2011

UVC - OZONE - HEATING - AERATION AIR PUMPS 

AIR PUMPS 

AIR PUMP SCHEGO code 809 

Quality air pump from Germany for aquaria and ponds, 

very quiet membrane pump. 

March 2011 

TYPE ART. 

NR. 

GBP MAX. 

FLOW 

ADJUS- 

TABLE 

WATT 

Ideal SC152 15,50 2,5 l/m no 5 

Optimal SC154 20,10 4 l/m yes 5 

M2K3 SC156 35,15 6 l/m yes 5 

WS3 (3m pressure!) SC158 37,15 6 l/m yes 5 

6 - 18 

WS3 

3 metres 

pressure! 

AIR PUMP BOYU code 809 

High quality air pumps for aquariums and ponds. 1 year warranty on electrical parts 

(not on membranes). S1800 has an internal battery that automatically charges in 12 

hours and assures 12 hours of operation in case of power failure or for 

transportation. The microcomputer calculates the charge and discharge of the 

battery! The S-1800 is also equipped with a 6V car adapter connection. 

TYPE ART. 

NR. 

GBP MAX 

FLOW 

MAX 

PRESSURE 

WATT ADJUS/ 

TABLE 

OUT- 

PUTS 

S-1000 SC137 6,25 3 l/m 1,2 mtr 3,5 no 1 

S-2000 SC138 9,15 8 l/m 1,2 mtr 8 no 2 

S-1800 with battery! SC144 41,65 8 l/m 1,2 mtr 8 yes 2 

S-4000B SC139 14,05 16 l/m 1,2 mtr 15 yes 4 

S-1000 S-2000 

S-4000B 

S-1800 

With battery! 

AIR PUMP HAILEA ACO SERIES code 809 

High efficiency, high air output, low energy consumption. 

TYPE ART. 

NR. 

GBP WATT MAX. 

FLOW 

MAX 

PRESSURE 

KG SIZE 

MM 

7701 SC142 6,50 3 4 l/m 1,3 m 0,33 133 x 67 x 62 

7702 SC146 9,90 4,5 2 x 4 l/m 1,5 m 0,56 152 x 78 x 74 

9601 SC147 6,20 2 3,2 l/m 1,2 m 0,40 136 x 78 x 68 

9602 SC148 8,50 5 7,2 l/m 1,2 m 0,53 162 x 100 x 87 

9610 SC149 15,75 10 10 l/m 1,5 m 1,60 187 x 145 x 95 

9630 SC151 29,60 15 16 l/m 1,5 m 2,7 248 x 176 x 137 

7701 

7702 

9602 9610 

HI-FLOW V-SERIES AIR PUMPS code 809 

The V-series air pumps are powerful and low in noise. Casing is made of a high quality aluminum alloy. 

High output and pressure thanks to a double air chamber. Suited for continuous usage. 

TYPE ART. 

NR. 

GBP WATT MAX. 

FLOW 

MAX 

PRESSURE 

KG SIZE 

CM 

V-10 SC400 22,80 10 10 l/m 2 mtr 1,3 13 x 12 x 10 

V-20 SC402 28,90 15 20 l/m 2 mtr 2,5 23 x 19 x 18 

V-30 SC404 36,55 25 30 l/m 2,5 mtr 3,5 25 x 20 x 20 

V-60 SC406 58,65 35 60 l/m 3 mtr 5,6 27 x 24 x 21 

AIR PUMP HAILEA ACO PISTON PUMP code 809 

Very competitive priced air compressors with pistons (no membranes!). 

Housing made of high quality aluminium alloy with cooling ribs. 

Low energy consumption, high air output. 

TYPE ART. 

NR. 

GBP WATT MAX. 

FLOW 

MAX 

PRESSURE 

KG SIZE 

MM 

208 SC436 18,30 16 35 l/m 1,5 m 0,9 142 x 80 x 78 

318 SC438 22,95 30 60 l/m 2,0 m 1,65 182 x 95 x 116 

328 SC439 34,85 60 70 l/m 3 m 2,80 199 x 108 x 133 

9601 

9630 




6 - 19 

AIR PUMPS 

AIR PUMP DY-SERIE code 809 

DongYang has been producing air pumps of excellent quality for 40 years for industrial and medical applications. The design of the 

pumps is simple but good. The pumps are efficient, powerful and oil-free. The pumps have been used in aquaculture, ponds and 

aquariums for several years now. CE certified, 2 years warranty. Manifold not included. 

TYPE ART. 

NR. 

GBP AIRFLOW 

AT 1,2 metre 

AIRFLOW 

AT 2 metre 

OUTPUT MAX 

PRESSURE 

WATT 

DY-20 SC320 41,65 21 l/m 14 l/m 18 mm 3,4 mtr 30 






AIR PUMP HIGH-BLOW ALITA code 809 

The High-blow Alita is the most reliable and powerful air pump in its price class. 

Excellent quality with a 3 years warranty! 

TYPE ART. 

NR. 

GBP CAP. AT 

1,5 metre 

CAP. AT 

2 metre 

OUT-LET MAX 

PRESSURE 

WATT KG dB 

AL-40 SC340 110,00 40 l/m 30 l/m 18 mm 3,5 mtr 40 5,6 36 


AL-80FD SC345 187,00 70 l/m 60 l/m 18 mm 5,0 mtr 80 6,5 39 



HIBLOW AIR PUMPS code 809 

The one and only, original HIBLOW air pumps! Unmatched quality! Durable air pumps with extreme 

low noise levels (31-45dB). Working temperature 5-40°C. 2 years warranty. 

Capacity Baby HiBlow: 0,4 mtr - 6,5 l/m. HP20: 1,0 mtr - 18 l/m. 

TYPE ART 

NR. 

GBP CAP. AT 

1,3 metre 

CAP. AT 

2 metre 

OUT-LET WATT KG dB 

BABY SC393 62,05 - - 5mm 8,5 - - 

HP-20 SC385 119,00 - - 18mm 17 - - 

HP-40 SC386 153,00 40 l/m 28 l/m 18mm 38 5,7 32 

HP-60 SC387 193,00 60 l/m 40 l/m 18mm 51 7 35 

HP-80 SC388 228,00 80 l/m 60 l/m 18mm 71 7 36 

HP-100 SC389 348,00 120 l/m 75 l/m 18mm 95 8,5 38 

HP-120 SC390 396,00 150 l/m 100 l/m 18mm 115 8,5 39 

HP-150 SC391 471,00 180 l/m 150 l/m 18mm 125 7 45 

HP-200 SC392 510,00 230 l/m 200 l/m 18mm 210 7 46 

AIR PUMP NITTO PISTON PUMP code 809 

Very reliable, economical, low noise, oil free air pump. It is piston operated instead of a membrane. High air pressure to a max depth 

of 2 - 2,5 metres (depending on model). Attention: the maximum head pressure can exceed 2 metres due to a long distance to the 

manifold, smaller diameter of the hose used and so on, regardless of the pond depth! When these pumps exceed more than 2 metres 

of head pressure there will be a great chance of failure. Advice: Recommended to fit a pressure gauge on the outlet to check outgoing 

pressure. 1 year warranty. 

TYPE ART. 

NR. 

GBP IDEAL 

PRESSURE / 

OUTPUT 

MAX. 

PRESSURE/ 

OUTPUT 

OUT- 

LET 

WATT KG 

LA-28 SC110 148,00 1,1 mtr (32 l/m) 2 mtr (17 l/m) 18mm 29 2,9 

LA-45 SC112 170,00 1,1 mtr (50 l/m) 2 mtr (27 l/m) 18mm 47 3 

LA-60 SC113 226,00 1,5 mtr (78 l/m) 2,5 mtr (32 l/m) 18mm 64 5 

LA-80 SC114 251,00 1,5 mtr (85 l/m) 2,5 mtr (38 l/m) 18mm 86 5,3 

LA-120 SC116 413,00 1,8 mtr (128 l/m) 2,5 mtr (78 l/m) 26mm 130 9,4 

March 2011

UVC - OZONE - HEATING - AERATION AERATION 

AERATION 

PLASTIC MANIFOLDS 4MM code 809 

March 2011 

TYPE ARTNR. GBP CONNECTIONS 

6 outputs without valve SC182 0,84 inlet 9mm, output 6 x 4mm 





4 MM AIR HOSE CONNECTORS code 666 

TYPE ART. 

NR. 

GBP TYPE ART. 

NR. 

4 x 4 mm straight connector NH672 0,08 Straight 4 mm x M4 barb NH680 0,08 

4 x 4 mm 90° bend NH674 0,16 Valve M4 barb x M4 barb NH700 0,42 

4 x 4 x 4 mm “T” NH676 0,16 Valve M4 barb x 4 mm hose tail NH702 0,42 

4 x 4 mm cross piece NH678 0,25 Valve 2 x 4 mm hose tail NH704 0,42 

CHROMED BRASS MANIFOLDS 4 MM code 809 

TYPE ARTNR. GBP TYPE 

1 way valve SC216 0,81 A 

2 way valve SC217 0,81 D 

3 way valve SC218 1,70 B 

5 way valve SC220 2,89 B 

6 way valve SC222 6,80 C 




CHROMED BRASS MANIFOLDS 6MM code 809 

Chromed manifolds 6 mm with a valve. 


6 way valve SC263 16,35 


6 - 20 

GBP 

6 mm 

CHROMED BRASS MANIFOLDS 8MM code 809 

Chromed manifolds 8 mm with a valve. 





8 mm 

MANIFOLDS 9MM code 809 

Very practical air manifolds that can be precisely adjusted 

with a handy knob. Suited for wall mounting. 







9 mm 

C 



AERATION 


6 - 21 

AERATION 

MANIDFOLDS 9MM HEAVY DUTY code 809 

Manifolds heavy duty. 


4 - way (9mm) SC366 27,50 

6 - way (9mm) SC367 36,15 

8 - way (9mm) SC368 43,90 

10 - way (9mm) SC369 52,70 

9 mm 

ONE WAY 9MM VALVE code 809 

Universal set of fittings with elbow (18 mm internal), ball valve, hose tail 9 

mm and two clips. Suitable for e.g. Hiblow 40/60/80 en DY20/40/60/80. 


1 way valve 9mm SC214 6,65 

9 mm 

MODULAR MANIFOLD FOR 9 MM HOSE code 809 

Connectable ABS manifold with 3 outputs and with 9 mm connection. Can be glued. 

The end of the manifold system (A) is glue-capped (B); the manifold is attached to the air pump with a threaded adaptor socket (C) to 

3/4” in which a standard hose tail (D) or 3/4" to 20 or 25mm can be fitted. 

Use 9 mm valves (E) to close or adjust the individual airflows. 

TYPE ARTNR. GBP BOX 

3 way manifold (A) SC275 1,36 50 

End cap for manifold (B) SC276 1,02 50 

Threaded adaptor socket (C) AB132 1,46 - 

Hose tail ¾" x 19mm (D) SE124 0,87 - 

Valve 2 x 9mm hose tail (E) SE220 2,21 - 

9 mm 

D 

C A B 

SILICONE AIR HOSE 4MM code 509 

Very flexible en strong airhose on cardboard reel. 

SIZE ARTNR. GBP MTR 

Silicone air hose 4 x 6 mm KA239 0,21 100 

SILICONE 

CLEAR PVC (AIR)HOSE TYPE KRISTAL code 509 

SIZE 

MM 

ART. 

NR. 

GBP / 

MTR 

MTR/ 

ROLL 

SIZE 

MM 

ART. 

NR. 

GBP / 

MTR 

MTR/ 

ROLL 

4 x 6 clear KA240 0,20 25 mtr! 12 x 16 clear KA272 0,90 50 

4 x 6 clear KA244 0,20 100 12 x 16 green KA433 0,94 50 

4 x 6 green KA430 0,21 100 16 x 20 clear KA280 1,14 50 


9 x 12 clear KA266 0,51 50 18 x 22 clear KA283 1,29 50 


9 x 12 black KA438 0,53 100 20 x 24 clear KA288 1,41 50 

NON-RETURN VALVE 4 MM code 809 

Prevents water from entering the air pump. 


4 mm valve SC177 0,59 

E 

March 2011


PVC CHECKVALVE WITH HOSETAIL Code 145 

Check valve for hose. 

SIZE ARTNR. GBP B Z 

13mm (½”) AG120 2,67 50 28 

17mm (5/8”) AG122 2,73 50 28 

21mm (¾”) AG124 2,87 50 28 

AQUA JET VENTURI 2000 code 809 

Venturi with 50 mm glue-connection. Can be installed 

inside or outside the pond. MAXIMUM depth 2 metres. 

With air hose and reduction fittings. 

Now also available: Soft nose for damage prevention 

when end is submerged in the pond. 

March 2011 


Aqua Jet SC240 12,35 

Softness protection SC239 3,36 

SUPER AIR AERATOR code 809 

The Super Air is a pond aerator that requires less pump pressure than the regular Venturis. With a Venturi, as much as 50% of water 

flow may be lost, whereas with a Super Air the loss will only be 10 to 20%. The secret lies in the special Stainless Steel grid onto which 

the water flow passes at increased velocity. The form of the grid causes optimal turbulence and mixing of water and air, providing 

efficient oxygen exchange. Tests have shown that the yield (= oxygen uptake in water) in a Super Air is noticeably higher than in a 

normal Venturis with a reduced loss of water flow. APPLICATION: The Super Air must be placed at an angle of ± 45°, with the grid fully 

submerged. Make sure that the air intake is completely above water. It is also possible to instal the unit with the output above the water 

surface. Sometimes this is recommended when starting a new pond or filter, in quarantine and hospital tanks and in tanks with very 

heavy fish loads where ammonia and nitrite may occur due to insufficient biomass in the filters. The Super Air can separate part of 

those gasses. Placing the output above water level causes the gasses to be blown off into the air. ATTENTION: The Super Air is very 

sensitive for clogging of the grid by string algae (blanket weed). Some form of pre-filtration is therefore recommended to ensure 

continuous operation. The grid needs to be cleaned regularly with a (tooth)brush. 

TYPE ARTNR. GBP SIZE FLOW RATE 

Superair 32 SC202 41,65 32 mm 3 to 5.5m³/h 

Superair 40 SC204 50,15 40 mm 5 to 8m³/h 



LIMEWOOD AIR DIFFUSER FOR SALTWATER SKIMMERS code 809 

Limewood diffusers produce the finest bubble for the most efficient protein skimming. 

Optimal performance after 1 -2 days. Life span 4 - 8 weeks. 

SIZE ARTNR. GBP AIRHOSE 

55 x 20 x 20mm SC248 1,36 2 & 4 mm 

6 - 22 

limewood 

AIR CURTAIN code 809 

Provides a very fine air diffusion and can be bend in any form. Connection 4 mm. Type B is fitted with 2 air intakes due to its length. 

TYPE ARTNR. GBP OUTPUT TYPE BOX 

20 cm SC194 0,94 0,6 -1,2 l/min A 120/1 

45 cm SC195 2,47 1 - 3 l/min A 120/1 

60 cm SC196 3,32 2 - 6 l/min B 120/1 

90 cm SC197 4,59 3 - 10 l/min B 100/1 

B 




6 - 23 

AERATION 

TEST KITS 

AIR STONES HI-OXYGEN & BUDGET code 809 

Excellent quality grey/blue air stones, hardened with an aluminium alloy at high temperature (1300°C). The stones are very porous 

and produce very fine air bubbles for optimal aeration. Corrosion-free and shock-resistant. 

Suitable for oxygen, air, seawater and ozone in ponds, aquaculture, ozone generators and medical applications. 

TYPE ARTNR. GBP OUTPUT AIRHOSE BOX 

Round 3,2 cm (A) HI-OXYGEN SC232 1,01 0,5 - 1 l/min 4 mm 360/45 

Round 5 cm (A) HI-OXYGEN SC234 1,19 1 - 2 l/min 4/9 mm 192/12 

Disc 10 cm (B) HI-OXYGEN SC235 5,95 1 - 2 l/min 4/9 mm 80/10 

Disc 13 cm (B) HI-OXYGEN SC236 7,35 2 - 4 l/min 4/9 mm 60/10 

Disc 13 cm (B) BUDGET SC230 5,35 2 - 4 l/min 4/9 mm 48 

Disc 20 cm (B) HI-OXYGEN SC237 21,10 10 - 25 l/min 9 mm 14/1 

Disc 20 cm (B) BUDGET SC231 15,30 10 - 25 l/min 9 mm 12 

Cylinder Ø 1,5 x 7 cm (C) HI-OXYGEN SC241 1,83 1 - 2 l/min 4 mm 

Cylinder Ø 3 x 8 cm (C) HI-OXYGEN SC242 3,49 1 - 2 l/min 4/9 mm 56/14 



Cylinder Ø 4 x 22 cm (C) HI-OXYGEN SC245 12,60 15 - 20 l/min 9 mm 40/10 

Cylinder Ø 4 x 30 cm (C) HI-OXYGEN SC246 22,10 20 - 25 l/min 9 mm 25/5 

ECONOMY AIRSTONES code 809 

Normal compressed air stones for general use. The colour of the air stones can vary. 

TYPE ARTNR. GBP OUTPUT AIRHOSE BOX 

Cylinder ± Ø 1,5 x 2,5 cm (A) SC160 0,13 0,5 - 1 l/min 4 mm 288/24 

Cylinder ± Ø 2,5 x 5 cm (A) SC161 0,39 0,5 - 1 l/min 4 mm 288/24 

Cylinder ± Ø 4 x 5 cm (A) SC164 0,49 1 - 3 l/min 4 mm 216/24 

Round 2,5 cm (B) SC163 0,16 0,6 - 1,2 l/min 4 mm 864/36 

Round 5 cm (B) SC165 0,58 1 - 3 l/min 4/9 mm 192/24 

Bar 10 cm (C) SC168 0,36 0,5 - 1 l/min 4 mm 432/24 

Bar 15 cm (C) SC170 0,50 1 - 2 l/min 4 mm 288/24 

Bar 30 cm (C) SC172 0,98 1 - 4 l/min 4 mm 144/24 

HDPE AIR DIFFUSERS code 809 

These new air diffusers are made of a special HDPE (high density polyethylene) en supply extremely fine air bubbles. By means of a 

special process the pore openings on the inside are 350 micron and 120 micron on the outside. Pressure loss is smaller than 0.015 bar 

(15 cm!). To install with rigid PVC pipes. For use with flexible air hose fill the diffuser with pea gravel for counter weight). 

Connection ½” fem.thr. 

Benefits: 

- Energy saving (up 25% less energy costs). 

- High airflow, less pressure loss. 

- Unbreakable, low in maintenance. 

TYPE ARTNR. GBP OUTPUT 

Ø70 x 80mm SC286 17,65 17 l/m 

Ø70 x 160mm SC287 25,95 33 l/m 

Ø70 x 250mm SC288 36,30 50 l/m 

Ø70 x 400mm SC289 52,70 83 l/m 

A 

B 

A 

B 

C 

C 

March 2011

n 


AERATION 

PROFESSIONAL MEMBRANE AERATION code 809 

Professional rubber membrane aerators. 

Suitable for industrial applications and for pond aeration. 

March 2011 

TYPE ARTNR. GBP OUTPUT 

Disc 25cm, ¾” male thr. SC260 22,95 33 - 133 l/min 

Disc 34cm, ¾” male thr. SC261 29,60 33 - 166 l/min 

Tube 65 x 5,6 cm, ¾” fem. thr. SC262 33,15 33 - 133 l/min 

BOTTOM AERATION code 809 

Bottom drain (“heavy duty”) with a rubber membrane dome (type 1) for the aeration of ponds. Diameter of the dome is 38 cm (air 

membrane Ø34cm). Recommended air flow is ± 20 ltr per metre water depth. Type 2 is a “free standing unit” aerator. Type 3 is an 

aerated dome to fit on existing bottom drain. 

NOTE: you can use the aerated dome on every bottom drain! The pipe connection to connect it to the dome is 50mm and 48,3 mm 

(English 1½ inch). Air hose adaptor 9mm. 


Complete bottom drain with aeration lid (1) SC280 87,55 

Free standing bottom aeration (2) SC281 75,15 

Aerated dome for 48,3 (1½”) & 50mm (3) SC282 61,00 

1 2 3 

SPINDRIFTER POND AERATOR code 809 

The Spin drifter Pond Aerator consists of a EPDM rubber membrane (diameter 250mm) mounted on a Polypropylene disk. The aerator 

is mounted on a steel support with nylon coating and weighs 5 kg in total. The Pond Aerator was designed to be placed on the bottom 

of the pond. The Aerated Dome was designed to be installed in an existing bottom drain and the Aerated Bottom Drain is a complete 

bottom drain with separate connection for the air hose. When air is blown into the membrane, the membrane inflates before any air 

bubbles are apparent. When it is fully inflated, air bubbles will escape through the 4500 slits. When the airflow is interrupted, the 

membrane deflates and collapses, closing the slits before any water can flow back into the aerator. The required pressure to blow air 

through the slits in the membrane is 20 mbar at the recommended airflow. The recommended airflow in a koi pond is 20 ltrs/minute/ 

metre depth per aerator for maximum oxygen exchange to the water. The drawing below shows how the aerator causes the water to 

circulate inside the pond. 


Pond Aerator (10mm air hose connection) (A) SC250 91,95 

Aerated Bottom Drain with 32 mm input for 10mm air hose (B) SC252 256,00 

Aerated Dome for standard bottom drain 110 with 48,2 mm 

connection (C) (10 mm air hose connection) 

Aerated Dome for standard bottom drain 110 with 50 mm 

connection (10 mm air hose connection) (C) 

B 

SC254 120,00 

SC256 120,00 

6 - 24 



TEST KITS 


6 - 25 

TEST KITS 

ECO-CHECK 5 IN 1 TEST STRIPS FOR PONDS & AQUARIUM code 812 

Very reliable and easy to read quality test strips. 

- pH of 5,5 - 6,5 - 7,0 - 7,5 - 8,0 - 8,5 - 9,5. 

- KH Alkalinity of 0º - 2,3º - 4,5º - 6,7º - 10º - 17º - 40º dH. 

- GH Hardness of 0º - 1,4º - 4,2º - 8,4º - 17º - 56º dH. 

- NO2 Nitrite of 0 - 0,5 - 1,0 - 3,0 - 5,0 - 10 - 20 mg/litre. 

- NO3 Nitrate of 0 - 20 - 40 - 80 - 160 - 200 mg/litre. 


5-pad test strips (50 pcs) SC823 10,55 

AMMONIA ALARM FOR PONDS, MARINE & FRESHWATER AQUARIA code 363 

- Continuously detecting toxic free ammonia in marine and fresh water. 

- Simply placed in the water, it indicates the level of the ammonia (already starting from 0,02 mg/l) and 

helps to prevent critical situation. A sensor changes from colour relative to the ammonia concentration. 

- It lasts for at least 1 year. 


Ammonia alarm MB106 8,80 

CONTINUOUS AMMONIA CONTROL 

THROUGH COLOUR INDICATION! 

AMMONIA TEST STRIPS FOR PONDS AND FRESHWATER AQUARIUM code 812 

- NH3 Ammonia of 0 - 0,2 - 1 - 3 - 6 mg/litre. 

TEST PROCEDURE: 

1) Add 2 ml of water sample to be tested to vial. 

2) Dip one into the sample for 30 seconds with a gentle, steady up and down motion. 

3) Remove and discard the strip. 

4) After 3 minutes, using the enclosed colour chart, match vial to closest colour. 


1-pad test strip Ammonia (50 pieces) SC822 16,95 

MICROBE-LIFT PHOSPHATE TESTSTRIP FOR PONDS & AQUARIUM code 812 

To date, phosphate test kits have consisted of a bottle or tube with a liquid that has to be added drop by drop to a water sample. The 

idea is to count the number of droplets that are required to produce a sudden change in the colour of the sample. The number of 

droplets equals a given phosphate concentration. This is a relatively laborious method that is not very accurate given that the size of a 

droplet can vary considerably, depending on how hard you squeeze the plastic tube. The Microbe-Life Phosphate Test Strip is much 

simpler: Fill one of the tubes with water up to the top line. If the sample consists of freshwater, place one test strip into it. If the sample 

consists of saltwater, place two test strips into it. Move the test strip or strips slowly up and down for 20 seconds. Remove the test strip 

or strips and throw away. The colour of the water sample in the test tube corresponds with the following phosphate concentrations: 

Yellow = 0.0 ppm (parts per million), Green = 0.2-1.0 ppm, Blue = >2.0 ppm. Place the test tube in the white space between the colours 

on the colour card. With the card held underneath the tube, move the tube from one colour to another until you get the closest match 

(as seen from above). The colour that comes closest to matching the colour of the water sample gives the phosphate concentration. 

Make sure you perform this colour match within 30 seconds. 

The test kit comes with a colour card against which you can hold the transparent test tube to see which colour 

(and hence which phosphate concentration) comes closest to matching the colour of the water sample. 

The great advantage of this test method is that you don’t have to count droplets, because the reagent is 

already on the test strip and simply dissolves as you move it up and down in the water sample. All you 

need to do is compare the colour of the sample with the colour card. 


Phosphate test (50 strips) SC824 14,05 

March 2011

UVC - OZONE - HEATING - AERATION HANNA INSTRUMENTS 

QUICK TEST FOR PH & KH code 363 

Extremely simple, quick to perform pH & KH tests. 


pH test MB108 1,42 20 

KH test MB109 1,42 20 

KUSURI TEST KITS code 821 

The Kusuri range of visual test kits all feature Palintest® technology components, they 

are the very best in visual test kits. All kits feature and easy to colour match plastic 

acetate card and are supplied with non-degradable foil sealed tablets. Each kit will do 30 

tests. The trouble with visual test kits is matching the colour to the sample to ascertain a 

reading, our kits feature an accurate plastic acetate colour strip, when held up to a 

daylight source, it is far easier to compare than a paper printed chart. 

HANNA INSTRUMENTS 

March 2011 


pH 6.8, 7.0, 7.2, 7.5, 7.8, 8.0, 8.4 (30 tests) SF630 11,70 4 

Ammonia (NH3/NH4+) 0, 0.15, 0.25, 0.5, 0.75, 1.0, 1.5 mg/l (30 tests) SF632 11,70 4 

Nitrite (NO2+) 0, 0.1, 0.25, 0.5, 1, 2, 4 mg/l (30 tests) SF634 11,70 4 

Nitrate (NO3+) 0, 10, 25, 50, 75 ml/g (30 tests) SF636 11,70 4 

KH (Alkalinity) 30 tests SF637 14,45 4 

Salinity 30 tests SF638 14,45 4 

POCKET TESTER FOR pH, EC/TDS & TEMPERATURE code 363 

The most diverse multi-purpose pocket tester on the market! Measures pH (0-14), as well as EC (0-20 ms), 

TDS and ºC (0-60°C)! Large display (2 lines), waterproof housing, 100% floating capabilities 

Automatic calibration position, automatic temperature compensation. 

Excl calibration solutions. Look on the next page for the relevant calibration solutions. 


98130 MB267 142,00 

POCKET TESTERS code 363 

Large and clear display, pH and EC meter equipped with automatic temperature compensation. pH and Redox/ORP meters equipped 

with dirt repellent junction. Redox/ORP meter equipped with an accurate Platinum electrode, EC meter equipped with carbon, dirt 

repellent electrodes. With protection cap, batteries and calibration screwdriver (pH and EC version) The new pHep 4 and DiST 5 have 

a large display (2 lines), a waterproof housing, 100% floating capabilities, Automatic-calibration function. Pocket testers come without 

calibration solutions. * Ask for availability. 


98108 pH (pHep +) MB260 53,00 

98201 Redox (ORP) MB262 110,00 

98302 (TDS) MB264 51,75 

98304 EC (DiST 4) MB265 57,10 

* 98311 EC/TDS (DiST 5) MB268 103,00 

98127 pH (pHep 4) MB266 80,20 

6 - 26 





6 - 27 


PRONTO ORP / REDOX INDICATOR WITH ALARM SIGNAL code 363 

The Pronto is a simple-to-operate, practical meter for ORP (Oxidation Reduction Potential, or 

Redox) measurements and has been manufactured to serve as a monitor for swimming pools and 

spas. The Pronto front case incorporates a large, bright LED indicator. Should the measurements 

fall below the user selectable ORP values (350 to 850 mV), the red LED starts flashing to alert the 

operator of an undesired condition. The Pronto can also be applied for ponds with ozone systems, 

however with an alarm indication “in reverse”. For pools and spas it is important that the ORP does 

not fall below a certain value for proper disinfection of the water. For ponds it is important that the 

ORP value will not rise above a certain value. Since the LED indicator only flashes under the 

selected value we have to interpret this alarm in reverse for ponds. As long as the indicator LED 

flashes, the ORP value is not too high for fishponds. 

EXAMPLE: When the ORP value rises above 350 mV, the indicator LED stops flashing to 

indicate that the ORP value in the pond is too high. Range: -999 to +999 mV with a resolution 

of 1 mV. Accuracy at 20°C is ±5mV. The ORP electrode has a platinum sensor with 2 metres 

of cable. 12 volt adapter is included. Pronto casing also incorporates a moulded eye so that it 

can be installed with just a screw. 


Pronto ORP Set incl. ORP electrode (HI982401 + HI3214P/2) MB212 153,00 

+240 mV calibration (460 ml bottle) MB354 24,55 

Replacement ORP electrode (HI3214P) MB214 78,70 

WATERPROOF PORTABLE O2 METER code 363 

- Measures fast and easy the dissolved oxygen in mg/L and %. 

- Automatic temperature compensation, automatic calibration in air on 100%. 

- Membrane cover is easy to replace, completely delivered in a suitcase, including sensor 

with temperature sensor and 4 metres of cable, 2 reserve membrane covers, electrolyte and 

batteries. (excl. calibration solution). 


9146 (O2) MB210 577,00 

PORTABLE pH, EC & TDS METER code 363 

- Measures fast and simple the pH, EC, and TDS with the same sensor. 

- Automatic temperature compensation. 

- Easy calibration (1 or 2 points). 

- Completely delivered with battery (excl. calibration solution). 


9813 MB204 222,00 

THERMOMETER code 363 

- Accurate measuring (0,1ºC), range from -20,0 up to 100,0 °C. 

- MB270 has a weighted waterproof sensor with 3 metres of cable for 

readings at different depths. 

- MB271 has a pin with 1 metre of cable. 

- Easy 0,0°C cal-check. Complete with battery. 


98509-01 MB270 56,35 

98509 MB271 34,55 

March 2011

UVC - OZONE - HEATING - AERATION HANNA INSTRUMENTS 

CALIBRATION SOLUTIONS code 363 

Calibration solutions for Portable meters and Pocket testers. 


TYPE ARTNR. GBP PACK 

70004P buffer pH 4.01 MB340 26,00 1 (25 x 20 ml sachets) 

70007P buffer pH 7.01 MB342 26,00 1 (25 x 20 ml sachets) 

70030P EC 12,88 mS/cm MB344 30,60 1 (25 x 20 ml sachets) 

70031P EC 1413 µS/cm MB346 30,60 1 (25 x 20 ml sachets) 

* 70039P EC 5,00 mS/cm (for DiST 4) MB348 30,60 1 (25 x 20 ml sachets) 

* 7040L Zero Oxygen test solution MB350 16,15 460 ml bottle 

7021L +240 mV Redox test solution MB354 24,55 460 ml bottle 

MAINTENANCE SOLUTIONS code 363 

Maintenance solutions for Portable meters and Pocket testers. In 460 ml bottles. 

March 2011 


70300L Conservation solution for pH and ORP sensors and testers MB352 12,65 

7061L Cleaning solution for pH sensors and testers MB353 12,65 

ELECTRONIC ION SPECIFIC METERS code 363 

Beware: Order with associated reagents! (See next page) 



HI96700 Ammonia MB251 268,00 

HI96707 Nitrite MB253 271,00 

* HI93728 Nitrate MB254 271,00 

* HI93732 Dissolved oxygen MB256 272,00 

* HI93721 Iron MB258 271,00 

* 93735 Total hardness 

(GH in ppm, °fH, °dH and °eH) 

MB240 287,00 

MULTI RANGE ELECTRONIC ION SPECIFIC METER code 363 

- Professional photometer for ammonia, free- and total chloride, copper, 

nitrate, nitrite, dissolved oxygen, pH and phosphate (total 13 parameters 

possible!). 

- Completely delivered with 2 measurement cells including button, batteries 

and 12 VDC transformer. 

Note: Order with associated reagents! (See at the bottom of the page) 


C 203 (Multi) MB230 674,00 

GLASS CUVETS code 363 

Glass cuvets for photometers. 10ml Content. Set of 4 pieces. 


Glass cuvets 10ml. set of 4 pcs. MB362 19,70 

6 - 28 




6 - 29 


REAGENTS FOR ION SPECIFIC METERS code 363 

Reagents at the purchase of the photometer and as a supplement. 


93703-50 Cuvets Cleaning solution 230ml MB360 24,55 230ml 

93700-01 Ammonia LR (0,00-3,00 mg/l), for C203 & H 93700/96700 MB370 45,95 100 tests 

93707-01 Nitrite LR (0,00-0,35 mg/l) for C203 & HI 93707/96707 MB372 29,15 100 tests 

93728-01 Nitrate (0,0-30,0 mg/l) for C203 & HI 93728 MB374 61,90 100 tests 

93710-01 pH (6,5-8,5) for C203 MB375 19,65 100 tests 

93732-01 Dissolved oxygen (0,0-10,0 mg/l) for C203 & HI 93732 MB376 61,25 100 tests 

93721-01 Iron for HI93721 MB377 21,20 100 tests 

93735-00 Total hardness (0-250 mg/l) for HI 93735 MB378 36,30 100 tests 

93735-01 Total hardness (200-500 mg/l) for HI 93735 MB380 36,30 100 tests 

SINGLE TESTKITS code 363 

Test kits for a simple and economical analysis of your pond water. 


TYPE ARTNR. GBP NUMBER OF 

TESTS 

3810Dissolved oxygen (0-10 mg/l) MB300 64,00 100 

3812 Total hardness (GH) (0-300 mg/l) MB302 24,35 100 

* 3811 Alkalinity [also Carbonate hardness (KH)] (0-300 mg/l) MB303 37,10 100 

* 3824 Ammonia (0-2,5 mg/l) MB304 30,15 25 

* 3873 Nitrite (0-1 mg/l) MB308 33,35 100 

* 3874 Nitrate (0-50 mg/l) MB310 35,05 100 

* 3881 pH (6,0-8,5) MB312 35,05 100 

COMBINATION TEST KIT SALT- & FRESHWATER AQUARIA code 363 

- Ammonia (0-2,5 mg/l). 

- Nitrate (0-50 mg/l). 

- Nitrite (0-1 mg/l). 

- pH (6,0-8,5). 

- Including reagents for 50 tests from each parameter. 


3893 MB322 68,05 

REAGENTIA FOR TEST KITS code 363 



* 3824-025 Ammonia in freshwater (0-2,5 mg/l) MB404 20,45 25 tests 

* 3873-100 Nitrite (0-1 mg/l) MB408 19,70 100 tests 

March 2011

uvc - ozone - heating - aeration - SIBO

Create successful ePaper yourself

Delete template?

Save as template?