uvc - ozone - heating - aeration 2013 - SIBO

Bio UV lamps 2 Air pumps 21 Professional UVC-units 2 Heating 12 

Delta UV lamps 2 Parts UVC-units 7 Teco heaters/coolers 18 Heat pumps 14 

Dosatech 1 Ozone Cell 9 Teststrips 29 Aeration 24 

Hanna instruments 30 Ozone Generator 10 UVC-units 2 Solar panels 12 

Airhose 25 Ozone Redox UVC 11 

Doornhoek 3950 

5465 TC Veghel 

OZONE - UVC - HEATING - AERATION 

page 1 page 2 page 2 page 3 page 4 page 7 page 8 page 9-11 page 13 page 14 page 15 

page 17 page 18 page 20 page 22 page 23 page 23 page 24 page 25 page 25 

page 26 page 26 page 26 page 27 page 27 page 27 page 27 page 28 page 28 

page 28 page 29 page 30 page 30 page 31 page 32 page 32 page 33 

page 33 page 34 page 35 page 36 page 36 page 37 page 37 page 38 

Tel: +31 (0) 413-29.39.18 

Fax:+31 (0) 413-29.38.01 

E-mail: sales@sibo.nl 

February 2013 

K.v.K. ‘s-Hertogenbosch 160.70.577 

VAT nr. NL8108.72.626B01

UVC - OZONE - HEATING - AERATION 

Retail prices excl. VAT 

7 - 1 

DOSATECH 

1UVC DOSATECH - OZONE - HEATING - AERATION 

AQUAFORTE DOSATECH DOSAGEPUMP code 843 

The Dosatech is the ideal peristaltic pump for the dosing of a liquid solution into the piping system of your pond. 

A dosage of up to 60ml an hour is possible. In addition, it is possible to change the dosage every hour by operating the push 

button underneath the display. 

A big advantage of small daily dosages of living bacterial products (like Microbe-Lift Clean & Clear) compared to bigger monthly dosages is 

the so called ‘Yakult/Actimel effect’. With larger monthly dosages the bacteria that don’t find food will die. With small daily dosages more than 

30 different species of living bacteria will enter the pond looking for food. The Dosatech can be used for dosing any liquid product like anti 

blanket weed products, phosphate binders, Ph+/Ph-products, etc. The neoprene hose makes it possible to add various types of solutions to 

the water of your pond. 

Benefits: 

- Dosage of up to 60 ml an hour, dosage separately adjustable for each hour. 

- Digital indication when the pump head needs replacing (after 6000 hours). 

- Easy to install thanks to the compact design. 

- Neoprene hose and suction and injection nipples supplied. 

- Simple installation and maintenance. 

- 2 Year warranty on manufacturing faults. 

DosaTech comes with: 

Neoprene hose, suction and injection nipples. 

TYPE ARTNR. EURO 

Dosatech dosagepump SL230 101,00 

Pump head dosagepump SL232 23,65 

(2) clamp saddle 50 x 1” AL220 1,98 

(2) clamp saddle 63 x 1” AL226 2,74 

(4) Socket nipple 3/8” x 1” AC303 1,43 

Pond water 

1 = injection nipples with 3/8” male threaded. 

2 = clamp saddle for easy installation 

3 = suction nipple in liquid (e.g. bacteria) 

4 = socket nipple 1” male thr. x 3/8” fem.thr. 

AQUAFORTE UV-C TIMER DOSATECH code 843 

The UV-C Timer DosaTech is a unique product in the pond market: it combines an effective T5 UV-C unit with the new 

AquaForte Dosatech dosagepump! Also the UV lamp has a timer function which allows you to switch the lamp on/off per 

hour and keeps count for the amount of hours the lamp has been used to indicate the time of replacement. 

Why dosage? 

A big advantage of small daily dosages of living bacterial products (like Microbe-Lift Clean & Clear) compared to bigger 

monthly dosages is the so called ‘Yakult/Actimel effect’. With larger monthly dosages the bacteria that don’t find food will 

die. With small daily dosages more than 30 different species of living bacteria will ente the pond looking for food. The Dosatech can be used 

for dosing any liquid product like anti blanket weed products, phosphate binders, Ph+/Ph-products, etc. The neoprene hose makes it possible 

to add various types of solutions to the water of your pond. 

Benefits: 

- Build-in electronic ballast. 

- Integrated adjustable hour counter for the UV-C lamp. 

- Indication when the lamp (after 9000 hours) and dosagepump 

(after 6000 hours) needs replacing. 

- Dosage of up to 60 ml/h, dosage separately adjustable for 

each hour. 

- Controllable on/off status for the UV-C lamp. 

- Neoprene hose and suction and injection nipples supplied. 

- 316L stainless steel housing. 

- 2 Year warranty on manufacturing faults. 

TYPE ARTNR. EURO MAX. 

VOLUME 

MAX. 

FLOW 

UV-C Timer DosaTech 40watt SL240 299,00 40m³ 15m³/h 

UV-C Timer DosaTech 75watt SL241 329,00 75m³ 20m³/h 

Pump head dosagepump SL232 23,65 - - 

(2) clamp saddle 50 x 1” AL220 1,98 - - 

(2) clamp saddle 63 x 1” AL226 2,74 - - 

(4) Socket nipple 3/8” x 1” AC303 1,43 - - 

1 = injection nipples with 3/8” male threaded. 

2 = clamp saddle for easy installation 

3 = suction nipple in liquid (e.g. bacteria) 

4 = socket nipple 1” male thr. x 3/8” fem. thr. 

Pond water 

February 2013

UVC - OZONE - HEATING - AERATION UVC-UNITS 

UVC-UNITS 

AQUAFORTE SUBMERSIBLE UV-C UNIT code 805 

Submersible UV-C lamps have a big advantage compared to conventional UV-C units: no pressure loss! 

These lamps can be used in filter tanks so the water can pass without any resistance/pressure loss. 

NOTE: the UV-C radiation range is limited (dependant on i.e. the water clarity) so only a part of the water flowing 

by is treated. The user himself is responsible for the dangers of exposure to UV-C radiation to the eyes! 

Use the supplied safety glasses and/or a safety switch that automatically switches the lamp off when you have access to the lamp. 

Warning: Please be sure the lamp is always completely under water! 

The plastic end of the lamp has a 32mm diameter so you can use 32mm pipe clips to mount the lamp in a tank. The T5 lamp has a 

9000 hours lifespan and a 25.000 microwatt output. The new model can be opened so the lamp can be replaced (quartz sleeve and 

ballast can be used again). A special tank connector is now available for direct installation in i.e. filters (see picture). For mounting it 

needs a hole of ± Ø48mm (1½" male threading). 



Submersible UVC 40 watt T5 with union SB786 133,00 

Submersible UVC 75 watt T5 with union SB787 149,00 

Replacement lamp 40 watt T5 SB758 47,00 

Replacement lamp 75 watt T5 SB759 61,00 

SubmersibleUVC 40 watt Amalgam SB790 295,00 

Submersible UVC 80 watt Amalgam SB791 349,00 

Replacement lamp 40 watt Amalgam SB792 129,00 

Replacement lamp 80 watt Amalgam SB793 157,00 

Quartz sleeve for 40/75 watt & 80 watt Amalgam SB797 29,50 

Quartz sleeve for 40 watt Amalgam SB798 29,50 

Tank connector 1½” for submersible UV SB788 9,90 

7 - 2 

SB790 = 374mm 

SB786 / SB787 / SB791= 670mm 

140mm 

SB788 

BLUE LAGOON UV-C PRO BUSTER code 900 

The Blue Lagoon UV-C Pro Buster has 3 powerful 130 Watt UV-C Amalgam lamps and is suitable for large 

pools up to 450.000 litres. The UV-C radiation neutralises bacteria (including Legionella bacteria), viruses and 

other primitive organisms and prevents propagation. The Pro Buster comes with a flowswitch that turns off the lamp at too low flow. 

Amalgam UV-C is known as the most powerful UV-C light on the UV-C market! The Blue Lagoon UV-C Pro Buster has a built-in highfrequency 

electronic ballast. This ballast absorbs current fluctuations, thereby protecting the lamp. The device also contains an 

integrated timer that accurately keeps on tracking the hours, the device is in operation. You can see exactly when the lamp needs to be 

replaced. In addition, the STAINLESS STEEL interior ensures a reflection of the UV-C radiation which increases the efficiency up to 

35%. Connection: 3" male threaded. Max. pressure: 10 bar. Length: 95 cm. Diameter: 15,8 cm. Weight: 30Kg. 

Benefits: 

- Built-in electronic ballast to ensure a even power supply 

- Up to 35% more UV-C yield as a result of reflection 

- 3 powerful 130 Watt Amalgam lamps 

- Flow switch switches the lamp off at too low flow. 

- Integrated adjustable timer for the UV-C lamp 

- Digital indication when the lamp needs replacing 

- Complete 316L stainless steel housing 

- Easy installation and maintenance 

- 2-year guarantee with respect to manufacturing faults 

Technical specifications UV-C Pro Buster 

Type 450.000 /3x130W 

Max. pool capacity 450.000 L 

60.000 l/h 

Max. pressure 10 bar 

Diameter unit Ø 158 mm 

Length unit 95 cm 

Diameter in-outlet Ø 75 mm 

Stainless steel 316L 


VOLUME 

Technical specifications UV-C Pro Buster 

Electronic ballast 230V AC 50/60Hz 

Maximum current 3x1,1 AMP 

Lamp wattage (W) 3x130 Watt 

Lamp current 2,1 AMP 

Lamp type Philips TUV 130 Watt 

4P-SE Amalgam 

Flow switch √ 

Weight 30 Kg 

MAX. 

FLOW 

UV-C Pro Buster 3 x 130 Watt Amalgam TA270 2442,00 450 m³ 60 m³/h 

Philips lamp 130 Watt Amalgam TA254 290,00 - - 

AMALGAM 

Retail prices excl. VAT



7 - 3 

UVC-UNITS 

UV-C PRO INOX TIMER code 805 

Professional UV-C unit in stainless steel housing. Max. pressure: 3 bar. Flow switch (amalgam version) will switch off 

the lamp when there is insufficient flow. Build in timer allows you to switch the lamp on/off per hour and keeps count 

for the amount of hours the lamp has been used to indicate the time of replacement. UV-C output after 9000 hours is 

at least 80%. Length: 100cm, Ø120mm. 2 years warranty. 2” male thr. connections. 


POND 

MAX. 

FLOW 

UVC PRO Inox T5 75 watt SB795 799,00 70 m³ 20 m³/h 

UVC PRO Inox Amalgam 130 watt SB796 1099,00 150 m³ 35 m³/h 

Replacement TL 75 watt T5 Philips SB692 79,00 

Replacement TL 130 watt Amalgam Philips SB693 249,00 

Quartz sleeve T5 75 + 130 watt SB794 58,50 

Stainless Steel 

T5-LAMP 

AMALGAM 

PROFESSIONAL UV-C UNIT WITH 110MM CONNECTION code 805 

The first professional UV-C unit with 110mm connections! Ideal for gravity systems and low pressure pumps to 

reduce head pressure losses! UV-C unit with stainless steel interior for 35% more output due to reflection. 

Unit comes with a T5 or amalgam lamp for optimal performance. UV-C output after 9000 hours is at least 80%. 

Max. pressure: 2 bar. 2 Years warranty. 


POND 

MAX. 

FLOW 

Ø110mm T5 75 watt SB697 438,00 75 m³ 20 m³/h 

Ø110mm Amalgam 130 watt SB698 870,00 130 m³ 40 m³/h 

Replacement TL 75 watt T5 SB692 79,00 

Replacement TL 130 watt Amalgam SB693 249,00 

Quartz sleeve T5 75 watt SB688 45,75 

Quartz sleeve 130 watt Amalgam SB694 44,85 

Ø110mm ! 

T5-LAMP 

AMALGAM 

STAINLESS STEEL UV-C 130 WATT AMALGAM WITH FLOWSWITCH code 805 

Works with 1 Amalgam lamp (130 watt) with a radiation output of 50 Watt. UV-C output after 9000 hours is at least 

80%. Suited for ponds up to 130m³. Pump speed max. 30m³/h. Incl. 50/63mm solvent fittings. Max. pressure: 2 bar. 

Flow switch (amalgam version) will switch off the lamp when there is insufficient flow. 2 years warranty. 

TYPE ART. 

NR. 

EURO MAX. 

POND 

MAX. 

FLOW 

Stainless Steel UV-C 130 watt Amalgam SB679 833,00 130m³ 30m³/h 

Replacement TL 130 watt Amalgam SB693 249,00 - - 

Quartz sleeve 130 watt Amalgam SB694 44,85 - - 

Flowswitch 

AMALGAM 



AQUAFORTE STAINLESS STEEL POWER UV-C T5 code 805 

UV-C unit with stainless steel interior for 35% more output due to reflection. Unit uses T5 lamps for optimal 

performance (9000 hrs). UV-C output after 9000 hours is at least 80%. Fitted with electronic ballast for optimal 

performance. Average lifetime of the electronic ballast is ± 5 years. The T5 lamp has a UVC output of 25.000 

microwatt. In/outlet 63 mm solvent fittings incl. reducer fitting to 50 mm / 1½” fem. thr. Max. working pressure 3 bar. 

2 years warranty on factory production faults. Controls the growth of fungi, bacteria and algae. 



POND 

MAX. 

FLOW 

Power UV 40 watt T5 SB620 179,00 35 m³ 15 m³/h 

Power UV 75 watt T5 SB621 189,00 70 m³ 20 m³/h 

Replacement lamp T5 40 watt SB618 47,00 


Quartz sleeve 40/75 SB688 45,75 

Ballast 40 watt SB622 84,25 

Ballast 75 watt SB623 90,65 

7 - 4 

T5-LAMP 

UV-C BUDGET TECH code 805 

Lighter version of the Power UV-C T5. Stainless steel house for 35% extra reflection. Unit has a T5 lamp for optimal 

performance (9000 working hours). UV-C output after 9000 hours is at least 80%. Fitted with electronic ballast for 

optimal performance. Ø63 mm solvent connections. Working pressure max. 2 bar. 2 year warranty on factory faults. 

Reduces the growth of bacteria and algae. 


POND 

MAX. 

FLOW 

Budget Tech 40 watt SB760 145,00 35 m³ 15 m³/h 

Budget Tech 75 watt SB761 148,00 70 m³ 20 m³/h 

Replacement lamp 40 watt SB758 47,00 

Replacement lamp 75 watt SB759 61,00 

Quartz sleeve for 40/75 SB762 28,90 

T5-LAMP 

UVC BUDGET FLEX T5 code 805 

Competitive priced T5 UV-C units with an aluminium house and 4 connections! Very easy to install thanks to the 

flexible connection options. Available in 40 and 75 watt. Comes with electronic ballast for optimal performance. The 

T5 lamp provides a disinfection value of 25.000 microwatt. 63 mm solvent connections including reducer ring to 

50mm / 1½" fem.thr. Max. pressure: 3 bar. 2 Year warranty on factory faults. The UV-C radiation neutralises bacteria 

(including Legionella bacteria), viruses and other primitive organisms and prevents propagation. 


POND 

1 2 3 4 

MAX. 

FLOW 

Budget Flex 40 watt SB755 129,00 35m³ 15m³/h 

Budget Flex 75 watt SB756 137,00 70m³ 20m³/h 



Quartz sleeve for Budget Flex SB762 28,90 

Flexible installation 

options! 

T5-LAMP 



UVC-UNITS 


7 - 5 

UVC-UNITS 

ECONOMY UV-C UNIT (PL LAMP) code 805 

ABS house, 3 metres of cable, very low price! Incl. hose tail. UV-C 

output after 9000 hours is at least 80%. 


POND 

MAX. 

FLOW 

5 watt Economy SB808 49,50 2,5 m³ 1,5 m³/h 

9 watt Economy SB810 51,70 7 m³ 3,0 m³/h 

11 watt Economy SB812 53,90 10 m³ 5 m³/h 

PL-LAMP 

MULTIMAX UV-C UNIT WITH PL LAMP code 805 

Integrated ballast. Stainless steel sleeve, no more erosion. UV-C output after 9000 hours is at 

least 80%. Max. pressure: 1 bar. 5 year warranty. 


POND 

MAX. 

FLOW 

Multimax 5 watt SB827 80,20 2,5 m³ 1,5 m³/h 

Multimax 9 watt SB828 85,40 7 m³ 3,0 m³/h 

Multimax 11 watt SB829 89,95 10 m³ 5 m³/h 

PL-LAMP 

UVC PROFESSIONAL WITH PL LAMP code 805 

Stainless Steel housing, electronic ballast. Comes with 63mm PVC 

unions. Including fittings 63/50-1½” fem.thr. and hose tails 1½” - 25/32/ 

40. UV-C output after 9000 hours is at least 80%. 

Max. pressure: 2 bar. 2 Years warranty on manufacturing faults. 


POND 

MAX. 

FLOW 

UV-C Professional 18 Watt SB805 163,00 15 m³ 6 m³/h 



PL-LAMP 

UVC TL+ STAINLESS STEEL HOUSING code 805 

Stainless Steel housing, electronic ballast. 1” fem.thr. connections, incl. 

hose tails 9-32mm. UV-C output after 9000 hours is at least 80%. 

Max. pressure: 2 bar. 2 Years warranty on warranty faults. 


POND 

MAX. 

FLOW 

UV-C + 10.000 15 watt SB861 121,00 10m³ 5m³/h 

UV-C + 20.000 25 watt SB863 128,00 20m³ 8m³/h 

UV-C + 30.000 30 watt SB857 161,00 30m³ 10m³/h 

UV-C + 55.000 55 watt SB859 198,00 50m³ 10m³/h 

TL-LAMP 

AQUAFORTE UV-C LAMPS WITH PL LAMP code 805 

AquaForte introduce competitive priced UV-C lamps with PL 

lamp. Housing has a special “quick lock” conection for easy 

quartz sleeve cleaning. Fitted with 4 connections: 

3 hose tail connections 20/25/32/40mm and a UV sight glass. 


VOLUME 

MAX. 

FLOW 

18 watt PL UV-C unit SB800 85,10 10m³ 5m³/h 



PL-LAMP 



UVC-UNITS 


7 - 7 

UVC-UNITS 

ANTI ALGAE COPPER ELECTROLYZER code 843 

An ideal en effective method against (blanket)weed. The Copper Electrolyser is installed before the (swim)pond return inlet. The pond 

water flows through the Copper Electrolyser unit. A copper unit, or Electrolyser, is positioned within the housing, and the copper unit 

discharges a minimal amount of copper into the water flowing through the housing. These copper ions (Cu2+) in the water have a 

positive charge and destroy the cell walls of algae, bacteria, viruses and other primitive organisms. As the cell wall is thereby 

damaged, these organisms are no longer able to take up any nutrients, and are therefore unable to multiply. The process of applying a 

positive charge to copper is called copper electrolysis. Inlet/outlet: Ø50mm. 

PLEASE NOTE: (too much) copper is harmful for fish! After 2 weeks the unit 

will automatically switch off. Test the copper level in the water and activate the 

unit again if necessary. This will prevent the build-up of too much copper in the water. 

TYPE ARTNR. EURO WATT MAX. 

FLOW 

Copper Electrolyzer SL245 199,00 25 20m³/h 

Copper Test strips (50 pcs.) TA440 16,25 - - 

TMC POND CLEAR ADVANTAGE UV UNITS (TL-LAMP) code 805 

Supplied with screws for wall-mounting and filter covers. Staggered hose tails (13/20/25/32mm) and 1½" in- and outputs 

for minimum resistance. Maximum working pressure 0,7 bar. Solid construction. Designed for long life. 5 metres of cable 

included. 3 Years warranty. 


POND 

MAX. 

FLOW 

Pond Clear Advantage 8 watt SB767 81,40 5.4m³ 2.7m³/h 

Pond Clear Advantage 15 watt SB768 91,70 13m³ 6.8m³/h 

Pond Clear Advantage 16 watt SB769 102,00 14.4m³ 7.2m³/h 

Pond Clear Advantage 25 watt SB771 113,00 18m³ 9m³/h 

TL-LAMP 

TMC PRO CLEAR ADVANTAGE UV UNITS (TL-LAMP) code 805 

The Pro Clear UV30 and UV55 allow a high flow rate and are fitted with transparent staggered hose tails 1½” to 25/32/ 

40mm. Maximum working pressure 0,7 bar. Cable included. 2 Years warranty. 


POND 

MAX. 

FLOW 

Pro Clear Advantage UV30 SB772 169,00 27m³ 13.5m³/h 

Pro Clear Advantage UV55 SB774 185,00 45m³ 18m³/h 

TL-LAMP 

TMC PRO POND UV 110 (TL-LAMP) code 805 

The new version of the popular and reliable, Pro Pond 110. A new electrical part has been mounted as a tube between the 

lamps, which makes the lamp more compact and lighter. Operational pressure 3 bar. Standard 63mm and 2 inch solvent 

connection. The Pro Pond UV110 can only use the spare UV bulbs SB717 & SB719 (page 7-10). 2 Years warranty. 


POND 

MAX. 

FLOW 

Pro Pond 110 SB778 339,00 72m³ 36m³/h 

Replacement UV-TL 55w High Frequency TMC/GE SB717 24,95 - - 

Replacement UV-TL 55w Philips SB719 30,00 - - 

TL-LAMP 



BIO-UV PROFESSIONAL UVC-UNITS WITH CE-CERTIFICATION code 805 

These UVC units are made of a high quality stainless steel (316L) and have an 

unequalled performance at high flow rates. The 150 mm diameter of the housing 

assures a minimum exposure of 2 seconds to UV radiation at the recommended flow 

rates (see table). Due to the use of special "High Intensity" UV lamps with an output 

of 30.000 micro Watt (25.000 after 13000 hours) and the minimum exposure of 2 sec, 

they kill micros-copic algae as well as 99.9% of harmful bacteria and viruses, 

including Aeromanas, Pseudomonas and Legionella! 

The type of BIO-UV lamp should be based on an effective flow rate per hour, 

provided by the pump, rather than on the volume of the pond. BIO-UV lamps are 

used instead of chlorine for disinfection of swimming pools. 

- Maximum continuous pressure: 3 bar, maximum water temperature 40ºC. 

- 13000 Hours of effective use (performance is measured after 13000 hours of use). 

- 2 Year warranty. 

TYPE ART. 

NR. 


EURO WATT MAX. 

FLOW 

UV 

EXPOSURE 

TOTAL 

HEIGHT 

KG Ø VOLUME IN/OUT 

BIO UV10 SB650 1001,00 38 7 m³/h 2,8 sec. 42 cm 7,6 15 cm 6,4 litre 50 mm 

BIO UV20 SB652 1303,00 59 14 m³/h 2,6 sec. 69 cm 9 15 cm 11,7 litre 50 mm 



TYPE ARTNR. EURO TYPE ARTNR. EURO 

Replacement lamp UV10 SB660 129,00 Replacement quartz sleeve UV10 SB665 110,00 




DELTA UV PROFESSIONAL STAINLESS STEEL UVC-UNITS code 840 

A series of professional Stainless Steel UVC-units for ponds, pools, whirlpools etc. 

Exclusive features include a 316 Stainless Steel housing that allows for 360° rotation of 

the inlet and outlet unions for ease of installation. Another key exclusive features not 

commonly found in similar units is the inclusion of unions at each end of the Stainless 

Steel housing, which allows the total disassembly of the Stainless Steel housing to 

facilitate cleaning of the quartz tube, should it be necessary. 

Like all Delta Ultraviolet systems, Delta's proprietary High Output (HO) low pressure 

lamp is capable of 30,000 µ/sec./cm2 (25.000 output at lamp end-of-life) when design 

flow rates are maintained. This is the same requirement for Class A drinking water. The 

long life lamp is rated at 13000 hours of continuous use (approximately 1 year). 

EA-3H model: 3 inch (Ø76mm), High Output. EA-4H model: 4 inch (Ø100mm), 

High Output. Max. pressure 3 bar. 2 Year warranty (except for the lamp/quartz sleeve). 


FLOW 

LENGTH X 

DIAMETER 

IN/OUT 

EA-3H-5 SB630 473,00 35 3,6 m³/h 45 x 7,62 cm 63mm 

EA-3H-15 SB631 510,00 55 7,5 m³/h 70 x 7,62 cm 63mm 

EA-4H-15 SB636 593,00 55 10 m³/h 70 x 10,16 cm 63mm 

EA-4H-20 SB637 669,00 90 13 m³/h 99 x 10,16 cm 63mm 

EA-4H-40 SB638 720,00 110 15,6 m³/h 117 x 10,16 cm 63mm 

TYPE LENGTH WATT ARTNR. EURO TYPE LENGTH ARTNR. EURO 

Replacement lamp EA-3H-5 35,2 cm 35 SB640 76,90 Quartz sleeve EA-3H-5 42 cm SB645 137,00 

Replacement lamp EA-3H-10/15 60,5 cm 55 SB641 108,00 Quartz sleeve EA-3H-10/15 67 cm SB646 165,00 

Replacement lamp EA-4H-10/15 60,5 cm 55 SB641 108,00 Quartz sleeve EA-4H-10/15 67 cm SB647 182,00 



7 - 8 




7 - 9 

SPARE PARTS UVC-UNITS 


BLUE LAGOON LIFESPAN INDICATOR code 900 

The Lifespan Indicator shows exactly when the UV-C lamp of your client needs to be replaced. Your costumer can put this compact strip in a 

magnetic card (personalized versions are possible), which is easily attached to a steel surface by the whole magnetic back. The magnetic 

card can be made in any design and with your corporate identity logo and website. 

1: Once the UV-C lamp is switched on for the first time you squeeze the button of the Lifespan Indicator until you here "click". 

2: Paste the Lifespan Indicator into the (personalized) magnetic card. 

3: Attach the magnetic card in a space that is at room temperature, for example on the refrigerator door. 

4: The red coloured liquid will take about 12 months to completely turn the strip on the Lifespan Indicator red. 

5: When the lifespan indicator is red, the consumer will automatically use the contact details on the magnetic card to order a new 

UV-C lamp. 

The marketing result: 

Once the Lifespan Indicator is fully reddened, the consumer is reminded that the UV-C lamp needs replacement. By the magnetic card with 

your logo and website on it, your company will be the first choice for the consumer to buy a new replacement UV-C lamp! Your company name 

and contact details are easy to reach for the end consumer but also fully in sight as it is always on the refrigerator! 


Lifespan indicator TA410 0,82 

1 2 3 

4 5 

www.bluelagoonuvc.com 

bl l www.gerven.nl 

www.gerven.nl 

www.bluelagoonuvc.com 

www.gerven.nl 

T5 LAMPS code 805 

Overview of the various models of T5 lamps that are currently on the market for various models UVC lamps. 

TYPE MODEL ARTNR. EURO 

D T5 16 watt Philips SB690 36,60 

A T5 for AquaForte Power UVC 40 watt SB618 47,00 

B T5 for Jumbo Tech UVC 40 watt SB600 47,00 

D T5 40 watt Xclear SB680 24,75 

D T5 40 watt LightTec SB682 44,00 


A T5 for AquaForte Power UVC 75 watt SB619 61,00 

D T5 75 watt Xclear SB681 31,25 

D T5 75 watt LightTec SB683 77,00 

B T5 for Jumbo Tech UVC 75 watt SB601 61,00 


A T5 for AquaForte Ozone Redox UVC(low & high pressure) SB610 89,00 

C T5 for Turbo³ Ozone UVC (low & high pressure) SB602 89,00 

A 

B 

C 

D 

15/25˚C 

T5-LAMP 


UVC - OZONE - HEATING - AERATION SPARE PARTS UVC-UNITS 

UV-C TL LAMPS code 805 

The SB717 and SB719 are 55 Watt lamps, specially made for the TMC Pro Clear 55 Watt and the PRO Pond 110. 

BRAND TYPE ARTNR. EURO LENGTH QNT. 

TMC/GE UV-TL 4w SB700 6,65 136mm 25 pieces 

PHILIPS UV-TL 4w SB701 8,80 136mm 25 pieces 





LightTec UV-TL 10w SB706 12,15 330mm 25 pieces 







XCLEAR UV-TL 25w SB712 11,60 437mm 25 pieces 


XCLEAR UV-TL 30w SB714 14,05 895mm 25 pieces 


XCLEAR UV-TL 55w (not for Pro 

Clear 55 or Pro Pond 110) 


SB718 20,15 895mm 25 pieces 

TMC/GE UV-TL 55w High Frequency SB717 24,95 895mm 10 pieces 

7 - 10 

TL-LAMP 

UV-C TL LAMP SET code 805 

Complete set with high quality TL lamp (10.000 working hours!), quartz 

sleeve & O-rings. For optimal results it is better to replace the quartz 

sleeve on a regular basis. A quartz sleeve does wear out and exposes 

already 25% less radiation after 1 year of use! Set is suited for i.e. TMC 

Pro Clear 55. Set comes with: 

- Quartz sleeve Ø30 x 871mm. 

- TL UV-C lamp 30 or 55 watt (10.000 working hours!). 

- Set O-rings. 


Set 30 watt (lamp/quartz sleeve/o-rings) SB751 24,05 

Set 55 watt (lamp//quartz sleeve/o-rings) SB752 26,15 

+ 

+ 

TL-LAMP 

UV-C LAMPS AMALGAM code 805 

Overview of the various models of UV-C lamps amalgam that are currently on the market. 


40 watt Amalgam SB794 58,50 



AMALGAM 




OZONE 


7 - 11 


UV-C PL LAMPS code 805 

BRAND TYPE ARTNR. EURO QNT. 

PHILIPS PL-lamp 5 watt SB836 9,90 10 pieces 

Xclear/Economy PL-lamp 5 watt SB833 4,07 20 pieces 









PHILIPS PL-lamp 36 watt (+ 72 watt) SB843 41,35 25 pieces 


PHILIPS PL-lamp 55 watt (+ 110 watt) SB844 49,50 1 piece 


PL-LAMP 

QUARTZ SLEEVES TL LAMPS code 805 

TYPE ARTNR. EURO SIZE 

Quartz TMC Model 6 watt SB731 13,05 Ø20 x 185mm 

Quartz TMC Model 8 + 16 watt SB732 14,35 Ø20 x 262mm 

Quartz TMC Model 15/25 watt SB733 20,85 Ø30 x 420mm 

Quartz TMC Model 30/55 watt (Pro Clear / 110) SB734 37,70 Ø30 x 871mm 

O-rings (2 x) for TMC Quartz 6-8-16 watt SB745 1,41 - 

O-rings (2 x) for TMC Quartz 15/25/110 watt SB746 1,41 - 

O-rings (2 x) for TMC Quartz 30/55 watt SB740 1,61 - 

Quartz UVC TL Lamp 10 watt SB866 13,90 Ø31 x 280mm 

Quartz UVC TL Lamp 15/25 watt (not for TMC) SB867 15,20 Ø31 x 385mm 

Quartz UVC TL Lamp 30/55 watt (not for TMC) SB869 27,60 Ø31 x 844mm 

O-rings (2 x) for UVC-TL SB868 4,68 - 

QUARTZ FOR TL-LAMPS 

QUARTZ SLEEVES PL LAMPS code 805 


Quartz 5 watt UVC PL SB847 16,35 




Quartz 36 watt (+ 72 watt) UVC PL SB851 39,75 

Quartz 55 watt (+ 110 watt) UVC PL SB852 52,90 

O-ring for Quartz PL 9 to 55 watt SB845 1,35 

QUARTZ FOR PL-LAMPS 

QUARTZ SLEEVES T5 LAMPS code 805 

TYPE ARTNR. EURO SIZE 

Quartz sleeve TL 16 watt T5 SB689 37,85 Ø25 x 395mm 

Quartz sleeve TL 40/75 watt T5 SB688 45,75 Ø25 x 935mm 

Quartz sleeve SS Power UV-C T5 40/75 watt SB688 45,75 Ø25 x 935mm 

Quartz sleeve UV-C Budget Tech 40/75 watt SB762 28,90 Ø25 x 700mm 

QUARTZ FOR T5-LAMPS 


UVC - OZONE - HEATING - AERATION OZONE 

OZONE 

GENERAL INFORMATION ON PROTEIN SKIMMERS & OZONE 

Benefits of a protein skimmer: 

- Air bubbles are used as filter media 

- Removes protein compounds and other organic substances from the water cycle 

- Reduces the production of ammonia, nitrite, nitrate and phosphates 

- Removes substances that cause turbidity 

- Creates a higher oxygen level 

- Supports an optimal ozone reaction 

What is ozone, and what does it do? 

Ozone is a special form of oxygen. Normally, two atoms of oxygen form an oxygen-molecule. Contrary to this, an ozone molecule 

consists of three oxygen atoms. 

Once this molecule is decomposed, new reaction partners are needed. All effects which ozone has on the biochemical course of 

reaction in the water are based on its high oxidation power. Ozone is the strongest available oxidation agent. On the other hand ozone 

is environmentally friendly, as it only consists of three atoms of oxygen and it doesn't introduce any chemicals into the water. Just as in 

nature, ozone is formed in a flash inside the ozone electrode from the oxygen content of the air. Therefore, three oxygen molecules 

are needed to form two ozone molecules. 

Benefits ozone: 

- Reduces pathogens 

- Makes water crystal clear 

- Reduces algae growth 

- Reduces ammonia production 

- Reduces nitrite production 

- Supports the performance of biological filters 

- Removes organic matter 

- Removes yellow colorants in the water 

Together, ozone and a protein skimmer will improve the water quality significantly. Filter systems will perform more stable and equally. 

Peaks of pathogens or harmful matters will be strongly reduced or totally prevented. It is the perfect addition for every filter system. 

The German company Sander Aquarientechnik have a very good reputation. For decades they build professional protein skimmers 

and ozone systems, for private and commercial use. Below you can see a summary of models build over the years. 


7 - 12 



7 - 13 

OZONE 

SANDER OZON GENERATORS code 828 

Erwin Sander Elektroapparatebau have over 50 years of experience in building extremely reliable ozone generators. The C-series are 

designed for aquarium or quarantine systems, the S- & P-series are suited for most ponds. For bigger projects we can supply Multizon 

units on demand. Especially for these Multizon units we strongly recommend ozone detectors. The listed values are measured with the 

use of dry air, extra oxygen addition is not needed. The ozone generators can be controlled with Redox meters. 

TYPE ARTNR. EURO CAP. MAX. 

POND 


OZON 

OUTLET 

C-100 SK950 186,00 100 mg/h 2m³ 4 mm 

C-200 SK951 211,00 200 mg/h 4m³ 4 mm 

C-300 SK952 314,00 300 mg/h 6m³ 4 mm 

S-500 SK953 719,00 500 mg/h 10m³ 6 mm 

S-1000 SK954 1173,00 1000 mg/h 20m³ 6 mm 

P-2000 SK955 2165,00 2000 mg/h 40m³ 6 mm 

SANDER REDOX METER code 828 

The redox meter switches an ozone generator on when it 

is below the desired value, and will switch it off when this 

set value is reached. This gives you control over the 

ozone dosage to the water and is a essential element in 

the system. The redox meters come with calibrated 

electrode (sensor) which should be replaced every 2 

years. There are 2 models available: a universal model 

with a 230V plug outlet that will be switched on/off, and a 

special Sander model that keeps supplying current to the 

generator but will deactivate ozone dosing. 


Redox meter for C/S/P serie SK960 290,00 

Redox meter universal SK961 356,00 



SANDER PROTEIN SKIMMERS code 828 

First of all, the Fresh-Skim protein skimmer, is an extremely 

efficient fresh water protein skimmer due to their large volume. 

As the proteins are directly removed from the water column, 

the filter system will have a significantly lighter job to do. The 

biological load of the water will be lower, besides the fact that 

the air bubbles will increase the oxygen level of the water. This 

will aid both fish growth as well as water clarity. The 

recommended flow is based on a contact time of at least 1 

minute which makes the Fresh-Skim also qualified as a safe 

ozone reactor. 

TYPE ARTNR. EURO HEIGHT AIR 

FLOW 


WATER 

FLOW 

When ozone is used we recommend the use of a residual ozone 

destroyer for the air outlet to prevent the release of ozone in the 

air. Thereare 2 options for mounting the redox electrode into the 

pipe system: in between the pump and the skimmer (before the 

ozone dosing), or in the return pipe from the skimmer (after the 

ozone dosing), or better, using both. Bigger skimmers are available 

on demand. The ceramic air diffusers should be replaced yearly to 

maintain maximum efficiency. The skimmer should be fed with prefiltered 

water (i.e. after a sieve- or drum filter) and the water should 

return to the pond freely in gravity, without any head pressure. 

7 - 14 

MAX. 

POND 

Fresh-Skim 200 SK965 950,00 1,8 meter 1,0 - 2,5 m³/h 3m³/h 20m³ 

Fresh-Skim 300 SK966 2727,00 2,1 meter 1,5 - 3,5 m³/h 8m³/h 50m³ 

Fresh-Skim 500 SK967 3942,00 2,1 meter 5 - 10 m³/h 22m³/h 140m³ 

Fresh-Skim 700 - p.o.d. 2,5 meter 10 - 20 m³/h 42m³/h 280m³ 

SANDER ACCESSORIES code 828 


Replacement electrode Redox SK975 105,00 

Ceramic diffuser Fresh-Skim SK976 47,05 

Residual Ozone Destroyer Fresh-Skim 200/300 SK977 269,00 

Residual Ozone Destroyer Fresh-Skim 500 SK978 674,00 

Air flowmeter 50-100 l/h SK979 15,70 

Air flowmeter 100-1000 l/h SK980 20,65 

Ozoflex hose 4-6mm 3 meter SK981 5,40 

Teflon hose 6-8mm 1 meter SK982 4,80 

Mounting bracket redox electrode 40 mm SK984 63,60 

Mounting bracket redox electrode 75 mm SK985 76,45 

Mounting bracket redox electrode Fresh-Skim SK986 150,00 




7 - 15 

OZONE 

AQUAFORTE KOIZO³ OZONE CELL code 843 

The worlds 1st ultra compact low-voltage ozone generator for reducing algae & germs 

Ozone has traditionally been a topic of hot debate among professional koi keepers. The fact is that ozone possesses 

loads of highly valuable characteristics, it removes colourants from the water; it converts toxic nitrite into relatively 

harmless nitrate; it removes bacteria, viruses and other pathogens; it kills green algae; and it raises the oxygen content of the water. 

The AquaForte KOIZO³ Ozone Cell produces ozone from water! 

A process of electrolysis is used to break down water into its two component parts: oxygen and hydrogen. The Ozone Cell also 

releases single oxygen atoms (i.e. O rather than O2 atoms) that instantly combine with oxygen molecules (O2) to form ozone (i.e. O3). 

Ozone is a highly reactive substance and tries to revert straightaway to its original form, thus causing the extra oxygen atom te react 

with an organic substance such as nitrite, a colourant, algae or a virus, which are then ‘incinerated’ by oxidation. The substance that 

remains after this oxidation process is pure oxygen. The ozone leaves the Micro Ozone Cell in the form of tiny bubbles of gas. This is 

the great advantage of a succesful waterbased reaction: the smaller the particles, the better. 

The Ozone Micro Cell is supplied with a Soft Water Module. This unit has to be filled with distilled/deionized water. The cell core is 

fitted directly into the module so the cells are only in contact with pure water. The ozone produced leaves the module through a small 

stainless steel capillary pipe that holds an ozone hose. This ozone hose has a 3/8" fitting to connect with the pond pipe system to 

perform its oxidizing cycle. The only maintenance required is refilling the module with distilled water. The life-span of the ozone cells 

in this module is extended to at least one year! An additional benefit is the user can see the cell continuously at work by means of 

the rising ozone bubbles. The Soft Water Module is supplied with a handy wall bracket for easy installation. The Ozone Micro Cell 

KOIZO³ 4 Cells is now standard equipped with this module. 

ozone gas 


Soft Water Module for Ozone Micro Cell SL218 105,00 

capilllary 

KOIZO³ 4 cells incl. Soft Water Module 

Cell Core Replacement Set (4 pieces) 

SL224 

SL226 

519,00 

70,05 

ozone 

distilled 

water 


micro cell 

For redox meters see page 7-36 

fitting 

1½” Male 

thr. 

ozone bubbles 

pond water 

AQUAFORTE OZONE REACTOR code 828 

Compact ozone reactor with a special compartment for activated carbon to destroy residual ozone. Ideal for 

removing (yellow/brown) colorants from the water with the use of ozone. Ozone generator is not included! Suited for 

ozone generators up to 500mg/h. Use pre-filtered water! Inlet: 40mm, outlet: 50mm. Procedure: water & ozone enter 

the mixing chamber through a venturi. The water then 

showers down the small holes into the reaction chamber 

where the ozone can do its job. The reaction chamber is 

fitted with a hose connector to re-use residual ozone from 

this area and mix it once more with the water inlet. The unit 

also has a residual ozone destroyer for outgoing air that 

can be filled with activated carbon. The water has to leave 

inlet 40mm 

the system through the activated carbon chamber which 

will remove any residual ozone from the water. Replace 

residual ozone 

destroyer 

activated carbon every 3 months! The inlet chamber and 

activated carbon chamber are easy accessible for 

maintenance. Total height: 58cm. Diameter: 250mm. 

Max. flow: ± 5m³/h.u. 

58cm 

for air 


Ozone Reactor SK946 490,00 

AquaJet 2000 Venturi SC240 15,40 

reaction 

chamber 

inlet chamber 

hose 

connetor 

for residual 


return 

50mm 

area for 

activated 

carbon 



AQUAFORTE OZONE GENERATOR code 828 

AquaForte introduce a brand new type of ozone generator. The technique used in this generator is extremely 

useful for ponds with bio filters or natural ponds. 

What makes this new technique so special compared to existing systems? 

- Extremely easy and safe operation. 

- Easy to maintain (cleaning without tools!). 

- Fully ‘visible’ operation with an adjustable ozone production of 100 mg to max. 2 gram Ozone (O³) per hour, based on air. 

- Suited for Ozone injection in water as in air. 

- Designed for the use in quarantine tanks and middle sized ponds (15 to 20m³). 

- Ozone application will result in crystal clear water. 

- Low in energy. 

- Robust aluminium waterproof case with long-life ceramic corona modules that do not 

need to be replaced. 

pond 



AquaForte Ozongenerator SK940 1087,00 

AquaJet 2000 Venturi SC240 15,40 

for redox meters see page 7-36 

Ozone 

reactor 


2 


outlet 

venturi 

1 

Air inlet 

pond water 

Long-life ceramic corona 

modules with visable 

function that can 

be cleaned within 5 

minutes, without tools! 

Example ozone application 

External air can be entered through the grey hose connector (1). The generator is designed to have the ozone 

sucked out by means of a venturi (2). This is the recommended and most safe way to use the generator and 

prevent the escape of ozone through leakage. Next, the mix of ozone and water has to go through an ozone 

reactor to have the ozone react with organics in the water. 

NEVER INJECT THE OZONE DIRECTLY INTO THE POND OR THE PIPE SYSTEM OF THE POND! 

In special occasions you can use a large, ozone resistant, air stone in the ozone reactor on the ozone side. 

A small air pump is then connected to the air inlet of the generator. Keep in mind that the ozone side has a 

free outlet to prevent an increased air pressure. 

7 - 16 

100% adjustable 

100mg - 2 g 

Ozone out 

Air in 

(6-8mm) 

(8mm) 

Recommended 

flow: 12 l/m 




7 - 17 

OZONE 

AQUAFORTE OZONE REDOX UVC code 805 

The Ozone Redox UVC has a special 75watt T5 UV-C lamp that generates ozone as well as UV-C at the 

same time. The lamp produces 600mg/h ozone and 25.000 microwatt of UV-C 

radiation output. The lamp produces ± 4000 hrs ozone & 

± 9000 hrs of UV-C radiation. The Low Pressure version 

comes with an airpump that “pushes” the ozone out of the 

unit and a “static mixer” that mixes the ozone with water with 

virtually no pressure loss. This Low Pressure version must 

be fitted after the filter installation (free return flow). The High 

Pressure version operates through a venturi injection system 

Airpump 

with a ballvalve to mix the ozone with water. Inlet/outlet is 

63mm. Max. flow ± 20m³/h. 

outlet 


inlet 

Ozone Redox UVC Low Pressure version 

incl. airpump & static mixer 

SB612 713,00 

Ozon Redox UVC High Pressure version 

incl. venturi & ballvalve injection system 

SB613 659,00 

Replacement Ozone UVC lamp (75 watt) SB610 89,00 

Replacement quartz sleeve for Ozone Redox 

(before 08/2010) 

SB611 30,95 

Replacement quartz sleeve for Ozone Redox 

(after 08/2010) 

SB611A 79,70 

HINT: The optimal life-span of the T5 lamp regarding UV-C is 

± 9000 hrs. For the ozone producing part this is about 4000 hrs. 

After this period of time the intensity decreases. When you replace 

the lamp in March there will be enough ozone-production 

for the whole season (from March to September) and there will 

be enough UV-C radiation for a whole year! 

For redox meters see page 7-36 

Low Pressure 

Static 

mixer 

outlet 

High Pressure 

inlet 

Venturi 

PARTS OZONE LAMPS code 805 

Overview of various parts for ozone lamps, that are currently on the market. 

TYPE MODEL ARTNR. EURO 

A T5 for AquaForte Ozone Redox UVC 

(low & high pressure) 

SB610 89,00 

B T5 for Turbo³ Ozone UVC (low & high pressure) SB602 89,00 

C Replacement quartz sleeve for Ozone Redox Unit 

(before 08/2010) 

D Replacement quartz sleeve for Ozone Redux Unit 

(after 08/2010) 

SB611 30,95 

SB611A 79,70 

SB611 SB611A 

A B C D 

STATIC MIXER code 805 

The “static mixer” comes with standard 8 mm air hose connectors and can instantly be connected to the existing air supply. The “static 

mixer” mixes the air with the water flow. The Stainless steel blades assure an optimum mix of air with the water due to the circulation 

of the water. Also these blades “smash” big air bubbles, into smaller air bubbles which ensures better oxyge absorption. The static 

mixer has a relatively low resistance so that economical pumps can be used. Optimum flow 8 - 12m³/hour. 

TYPE ARTNR. EURO MAX. FLOW Ø LENGTH 

Static Mixer SB614 116,00 48m³/h 75mm 65 cm 


UVC - OZONE - HEATING - AERATION HEATING 

HEATING 

TECO TR - SERIES COOLERS code 903 

High quality technology, italian style, know-how and unsurpassed TECO quality have contributed to a 

multi-functional unit, which meets all the needs and demands of the user. 

The new products offer the following advantages: 

- New and modern design with compact measurements. Patented titanium exchanger. 

- Easy installation, thanks to the provided taps. 

- 30% increased cooling effectivity, which saves a vast amount of power continuously. 

- Integrable and/or replaceable heater (option). Integrable and/or replaceable UV-C sterilizer (option). 

- Removable air filter for easy and fast maintenance. 

- Obstructed air filter alarm and control. 

- Alarm end of life UV Light. 

- "Silent" a special function which makes the unit work more quiet (not on TR30/60) 

- Quick connector with taps for easy installation with the piping system (not on TR30/60) 

* Ask for availability. 


TYPE ARTNR. EURO WATT IN/OUT SIZE WEIGHT 

TR 10 TB104 575,00 200 16/20mm 430x270x400(h)mm 15 kilo 



* TR 30 TB116 1919,00 850 1” 600x385x560(h)mm 42 kilo 

* TR 60 TB120 2556,00 1400 1” 600x385x560(h)mm 50 kilo 

Replacement UV-C lamp TB100 50,00 14 - - - 

7 - 18 

Model TR 30/60 

Model TR 10/15/20 

TECO TC - SERIES COOLERS / HEATERS code 903 

Technically the TC series are equal to the TR series. However it is provided with a 

heater and a UV lamp. 

TYPE ARTNR. EURO WATT IN/OUT SIZE WEIGHT 

TC 15 TB110 974,00 400 16/20mm 430x270x400(h)mm 18 kilo 

TC 20 TB114 1161,00 480 16/20mm 430x270x400(h)mm 20 kilo 

Replacement UV-C lamp TB100 50,00 14 - - - 




7 - 19 

HEATING 

OKU POOL SOLAR PANELS code 809 

You know the problem: a swimming pool/pond without extra heating is only pleasantly warm for about 3 to 4 weeks during the summer 

- a very short amount of time compared to the high investment and high maintenance a pool requires. An indoor pool even needs to be 

heated the complete year, which, considering the conventional energy sources, costs a lot of money and is not very environmental 

friendly. There is an other possibility! The heating of pools is the perfect application for the free and environmental friendly solar 

energy. Because no high temperatures are needed, but relatively a large amount of water needs to be heated, it is very effective to 

operate these installations at a high flow rate and on a relatively low temperature. OKU collectors are moulded in one peace and are 

colored homogeneous black. The system can normally be used with the existing filter pump. Corrosion and pool water resistant. The 

(pool)water is pumped directly through the collectors. OKU collectors are frost resistant and can hold human weight. 

There are 3 easy connection variations: 

1. with the filter pump over a automatic 3-way ball valve with thermostat. 

2. with an own pump and thermostat in a circular flow. 

3. with an own pump, thermostat and plumbing, disconnected from the filter system. 

See table on the right for the recommended collector size in 

% of the pool size for outdoor pools with covers or indoor 

pools (beginning of may up to september). Temperature 

increase 4 - 7°C in comparison with not heated pools. Without 

a cover the collector size ought to be 50% bigger. The local 

differences in hours of sun per day can in- or decrease the 

collector size with 20%. 

Pumps: recommended flow rate is 150 up to 250 liters per m² 

collector surface per hour. The recommended capacity of the 

pump can be easily calculated: the collector surface x 200 

liters. The pressure loss can be determined by taking the 

difference in height between the water level and collectors 

and add 5 metre. 

D ire c tio n o f in c lin a tio n 

Angle of inclination E SE S SW W 

90° 90 80 70 75 85 

60° 80 65 55 60 70 

45° 70 60 50 55 65 

30° 60 55 45 50 55 

15° 55 50 50 50 55 

0° 50 50 50 50 50 

Absorber area in % of Pool surface 

Technical specifications 

Very low pressure loss: ± 0,003 bar at 200 liters/hour per m². 

Flow rate: 150 - 250 liters/hour per m². 

Weight: app. 6 kg/m² - water volume 6 liters/m². 

Max. press.: 4,5 bar. Operating press.: 1,2 bar at 40°C. 

Output: up to app. 85% - capacity up to 0,85 Kwh/m². 

Average output: 0,5 - 0,6 Kwh/m². 

Temperature resistant from -50°C up to +115°C. type 1000 type 1001 type 1002 

TYPE ARTNR. EURO SIZE (L x W) M² SIZE 

Type 1000 with integrated collector tube Ø40mm and 2 connections Ø25mm SC600 122,00 1320mm x 820mm 1,08m² 

Type 1001 with 4 connections Ø25mm SC602 122,00 1320mm x 820mm 1,05m² 

Type 1002 with integrated collector tube Ø40mm on both small sides SC604 122,00 1320mm x 820mm 1,12m² 

Thermostat DIGISOL SC610 287,00 - - 

* 3-way ball valve with 230V servo-engine (* Ask for availability) SC612 446,00 - - 

Connection hose 25x3 x70 mm with 2 Stainless Steel hoseclips SC614 4,15 - - 

Connection hose 38x5 x60 mm with 2 Stainless Steel hoseclips SC616 4,65 - - 

Air release valve for solar panel SC618 14,35 - - 



AQUAFORTE HEAT PUMPS code 810 

Measuring 

conditions 

air temp. 24°C 

water temp. 26°C 

Measuring 

conditions 



Measuring 

conditions 

air temp. 7°C water 

temp. 26°C 

Measuring 

conditions 




Model AQF-8 AQF-10 AQF-13 AQF-17 AQF-17 3P AQF-21 3P AQF-26 3P 

Housing 

Model 8, 10, 13, 17, 21 Model 26 

ABS plastic 

casing 

ABS plastic 

casing 

ABS plastic 

casing 

7 - 20 

ABS plastic 

casing 

ABS plastic 

casing 

ABS plastic 

casing 

ABS plastic 

casing 

Air outlet horizontal horizontal horizontal horizontal horizontal horizontal horizontal 

Heating capacity kW 7,8 9,8 12,8 17 17,4 21 26 

Input power kW 1,44 1,73 2,36 3,15 3,15 3,96 4,73 

Running current A 6,57 7,85 10,72 14,31 5,25 6,60 7,88 

COP 5,4 5,65 5,45 5,4 5,52 5,3 5,5 

Heating capacity kW 6,3 7,8 10,2 13,6 13,8 16,8 21 

Input power kW 1,40 1,65 2,27 3,02 3,02 3,82 4,57 


COP 4,5 4,72 4,5 4,5 4,56 4,4 4,6 

Heating capacity kW 5,4 6,5 8,6 11,5 11,5 14,5 17 

Input power kW 1,46 1,71 2,39 3,11 3,11 4,03 4,47 


COP 3,7 3,8 3,6 3,7 3,7 3,6 3,8 

Heating capacity kW 4,6 5,7 7,2 10 10 12,3 15,5 

Input power kW 1,92 2,28 3,13 4,17 4,17 5,35 6,20 


COP 2,4 2,5 2,3 2,4 2,4 2,3 2,5 

Cooling possibility yes yes yes yes yes yes yes 

Fusing (slow, c-type) A 16 16 16 20 16 16 16 

Power V/Ph/Hz 220-240/1/50 220-240/1/50 220-240/1/50 220-240/1/50 380-400/3/50 380-400/3/50 380-400/3/50 

Compressor Rotary Rotary Rotary Scroll Scroll Scroll Scroll 

Fan speed RPM 750 750 750 750 750 750 750 

Noise pressure 1) dB(A) 47 47 49 49 49 51 53 

Working area ºC -10/40 -10/40 -10/40 -10/40 -10/40 -10/40 -10/40 

Refrigerant R410A R410A R410A R410A R410A R410A R410A 

Heat exchanger Titanium/PVC Titanium/PVC Titanium/PVC Titanium/PVC Titanium/PVC Titanium/PVC Titanium/PVC 

Flow switch Sika Sika Sika Sika Sika Sika Sika 

Piping diameter mm 50 50 50 50 50 50 50 

Water flow rate (min/max) m³/h 2,2-4,5 2,7-5,5 3,6-7,2 4,9-9,7 4,9-9,7 9-14 11-17 

Water pressure drop Kpa 10 12 12 14 14 16 16 

Dimensions L x W x H mm 938x360x581 1140x400x676 1140x400x676 1080x416x708 1080x416x708 1080x416x960 1080x416x1260 

Weight kg 59 60 64 85 85 118 152 

1) Noise pressure measured at 10m 



7 - 21 

HEATING 

AQUAFORTE HEAT PUMPS code 810 

AquaForte heat pumps distinguish themselves from other brands through their competitive price level, 

reliability and high quality components. 

- High efficiency (COP MAX 5.5) 

- High efficiency at low outside temperatures (-10°c) 

- SIKA Flow-switch 

- Timer function 

- Dual control, on unit and remote 

- Low noise operation 

- ABS house 

- Can be used as cooler/chiller 

Heat pumps are an ideal solution 

• The most economic and efficient solution. Without sunshine, the air is still full of energy. With a heat pump you will enjoy both comfort 

and wellness as well as lower energy costs. 

• Operation principle 

Heat pumps exploit the physical properties of a volatile 

evaporating and condensing fluid. The heat pump compresses the 

fluid to make it hotter on the side to be warmed, and releases the 

pressure at the side where heat is absorbed. The working fluid, in 

its gaseous state, is pressurized and circulated through the system 

by a compressor. On the discharge side of the compressor, the 

now hot and highly pressurized vapor is cooled in a condenser, 

until it condenses into a high pressure, moderate temperature 

liquid. The condensed refrigerant then passes through an 

expansion valve. The low pressure liquid refrigerant then enters 

the evaporator, in which the fluid absorbs heat and boils. The 

refrigerant then returns to the compressor and the cycle is 

repeated. 

• Extremely low power consumption (COP 5,5) 

80% of the energy is supplied from the outside air. 20% electric energy is needed to run the heat pump. The heat pump will reach an 

efficiency up to 5,5 (550%). This efficiency is determined by dividing the useful energy supply with the used energy to run the 

compressor. This means that only 20% of the energy must be purchased (as electricity) and 80% is supplied free of charge by nature! 

In other words: every Euro spent on energy gives you 4 Euro of warmth. You will only depend on your energy supplier for 20%! To 

compare the energy consumption with other systems: normal gas heater: 109%; condensing gas heater: 93%; electric heating: 100%; 

heat pump: 20%. 

Why is it the ideal solution? 

• AQF Heat pumps use the latest technologies with 410a refrigerant and a titanium heat exchanger. 

• The most optimal use of your pool - you will extend the swimming season with a heat pump from May to September, and this with 

minimum energy costs and maintenance. 

• Easy to install - for new projects as well as renovations. The heat pump is easy to install with 2 50mm connections, in bypass with 

your pump/filter system with 3 valves to adjust… and ready for use. 

TYPE ARTNR. EURO VOLT WATT AMP. CAP. BASSIN 

AQF-8 SC686 1860,00 240 1,44kW 6,57 7,8kW 10-20m³ 

AQF-10 SC687 2100,00 240 1,73kW 7,85 9,8kW 20-40m³ 

AQF-13 SC688 2495,00 240 2,36kW 10,72 12,8kW 40-60m³ 

AQF-17 SC689 3430,00 240 3,15kW 14,31 17kW 60-80m³ 

AQF-17 3P SC690 3480,00 400 3,15kW 5,25 17,4kW 60-80m³ 

AQF-21 3P SC691 4325,00 400 3,96kW 6,6 21kW 80-100m³ 

AQF-26 3P SC693 5625,00 400 4,73kW 7,9 26kW 100-120m³ 




AQUAFORTE SOLAR SHOWER code 374 

Use the free energy from the sun! 

The Aqua-Forte Solar shower has a capacity of 30 liters. These 30 liters will be heated by the 

sun and can be mixed to a comfortable temperature with the combi-valve. Fitted with extra lower 

tap for rinsing feet. Comes standard with a garden hose quick coupling for the supply of tap 

water. 



Solar Shower 30 liter with extra tap MD840 199,00 

PROFESSIONAL STAINLESS STEEL HEAT EXCHANGERS FOR PONDS AND SWIMMING POOLS code 809 

Stainless steel heat exchanger with high flow rate and little pressure loss. Should be installed only by competent central heating fitter. 

Not suitable for saltwater. All models have a 1” male thr. connection for hot water and 1½" male thr. connection for pond or swimming 

pool water (except model 230 which has a 2” connection). 

TYPE ART. 

NR. 

EURO CAP. WARM 

WATER 

FLOW 

POND 

WATER 

FLOW 

PRESSURE 

LOSS 

7 - 22 

SIZE 

W x L x H 

CM 

100 SC538 380,00 29 kW 40 ltr/min 6,6 m³/h 0,6 MWK 11,5 x 21 x 14 3 

130 SC540 427,00 38 kW 50 ltr/min 8,4 m³/h 0,75 MWK 11,5 x 34 x 14 4,5 

170 SC541 446,00 50 kW 68 ltr/min 11,4 m³/h 0,9 MWK 11,5 x 47 x 14 6 

230 SC542 546,00 67 kW 91 ltr/min 18 m³/h 1,1 MWK 11,5 x 47 x 14 6 

THERMOSTAT code 809 

Thermostat with Stainless steel housing to control heat exchangers. 

Housing: Aluminium 

Submersible sensor: copper / Stainless Steel 

Contact Rating NCC: 16 A (4A) / 250V 

Contact Rating NOC: 8 A (4A) / 250V 

Protection Class: IP 50 

Set range value of 0° to 40°C. Max. sensor temperature: 60°C 

Sensor length: 155mm. Total sensor length including ½" threading 170mm 


Thermostat up to 40°C SC530 112,00 

KG 

½” male.thr. 

FLOW SWITCH code 809 

This flow switch will turn off a relays or light appliances when there is too little flow. 

63mm solvent connection. Max. switching power is 80V/A. 

- Minimum flow for switching on: 3.000 ltr/h. 

- At less than 2.700 ltr/h it switches off. 


Flowswitch 63mm SC545 59,00 

155mm 

170mm 



7 - 23 

HEATING 

PROFI HEATER STAINLESS STEEL POND HEATER code 809 

With thermostat (up to 40º C). includes: 2 hose tails 25/32/40mm and PVC fittings 50/63mm. 230V. 


TYPE ARTNR. EURO POND 

VOLUME 

Profi heater 1KW Stainless Steel SC517 197,00 10m³ 



ELECRO KOI POND HEATER ANALOGUE POND HEATER code 809 

Elecro heater with manual operated control. Stainless steel body. Adjustable from 0-40°C. Accurate up to 1,2°. Reversible flowswitch. 

Min. flow 1m³/h, max. 17m³/h (use a bypass when exceeding 17m³/h!). Max. pressure 3 bar. 

Connection: 50mm union, 1½" female thread, incl. 1¼ - 1½” hose tails. 


2 kW 230V (9 amp.) SC498 379,00 

3 kW 230V (13 amp.) SC499 409,00 

ELECRO KOI POND HEATERS DIGITAL POND HEATER code 809 

The first series of heaters ever designed especially for koi ponds. Digital thermostatic control and display. Heating element stainless 

steel reinforced with titanium. Main tank: stainless steel BS316. Internal flow adjustment, which shuts down the heater if the flow rate 

becomes insufficient, built-in High Limit Thermostat, Internal Fail Safe, manual reset thermostat, for positive safety. Available up to 8 

Kilowatt. 

- Min. flow rate 1m³/hour, max. 17m³/hour (use a bypass if flow rate exceeds 17m³/hour!). 

- Max. press. 3 bar. Connection: 50mm union, 1½" female thread, incl. 1¼ - 1½” hose tails. 

Now also available with a timer for periodic heating or for day/night electricity rates. 


2 kW 230V (9 amp.) + TIMER SC503 570,00 

3 kW 230V (13 amp.) SC504 545,00 

3 kW 230V (13 amp.) + TIMER SC505 619,00 

6 kW 400V (9 amp.) SC507 775,00 

8 kW 400V (13 amp.) SC508 790,00 

ELECRO KOI POND HEATERS DIGITALPOND HEATER TITANIUM code 809 

Super corrosion resistant! Suited for seawater and tropical marine aquaria. All parts that get into contact with seawater are made of 

Titanium. Digital temperature adjustment and display. Provided with an internal powers witch, which shuts of the heater when the flow 

is too low, build-in thermal protection against overheating of the heating element. 

Min. flow 1m³/hour, max. 17m³/hour. Max. pressure 3 bar. 

Connection: 50mm union, 1½" female thread, incl. 1¼ - 1½” hose tails. 



2 kW 230V (9 amp.) SC488 690,00 

3 kW 230V (13 amp.) SC490 720,00 

* 6 kW 400V (9 amp.) SC494 1130,00 

8 kW 400V (13 amp.) SC496 1165,00 

TITANIUM 

SEAWATER 

RESISTANT 



SICCE SCUBA AQUARIUM HEATER code 904 

Fully immersible automatic thermostats designed for use in 

paludariums, turtle tanks and aquariums. Features: 

- Comprehensive line of 4 models (50-300W). 

- 100% Immersible. 

- High standard electronics. 

- Thermostat temperature control (18-32°C). 

- ON/OFF pilot light. 

TYPE ARTNR. EURO LENGTH AQUARIUM 

CAPACITY 

Scuba 50 watt TB360 14,80 25cm 25-50 litres 




FLOATING HEATERS code 809 

Stainless Steel heating element with floater for additional heating or for ice prevention in 

the pond. The element heats the water directly and is not harmful for fish. Including 10 

metres of cable. 



Schego 300 watt, length 25 cm SC510 55,20 

Schego 600 watt, length 35 cm SC509 72,20 

SCHEGO THERMOSTATIC PROTECTION code 809 

This peg-mounted thermostatic sensor has to be placed alongside the 

pond (not in the water!). It is set to activate the connected device, such 

as a pond heater, a circulation pump or an air pump, at 0 or 7 °C. The 

device discontinues after the frost. Prevents unnecessary power 

consumption. Includes 5 metres cable and peg. 


Thermostatic protection 7°C SC511 64,30 

Frost protection 0°C max. 300 watt SC512 57,95 

Frost protection 0°C max. 600 watt SC513 68,65 

SCHEGO THERM~VARIO POND HEATER WITH FROST PROTECTION code 809 

Prevents completely frozen ponds, even with heavy frost. Dependant on the weather 

circumstances, the heater can be adjusted to 100, 200 or 300 watt. The integrated frost 

protection will automatically activate the heat element at 0°C. The device discontinues after 

the frost. Prevents unnecessary power consumption. Includes 10 metres cable. 

TYPE ARTNR. EURO LENGTH 

Therm~Vario SC514 137,00 37,8 cm 

FROST PREVENTION code 806 

Frost prevention device in plastic carrying bag, also available with a connection for a 

pump on a venturi. This in order to keep the pond ice-free by blowing air into it. 


Frost Preventor standard SB304 8,60 

Frost Preventor with venturi SB306 14,05 

7 - 24 




7 - 25 

HEATING 

THERMOMETERS FOR PONDS AND SWIMMING POOLS code 809 

Model “lifebuoy” is a floating thermometer with stainless steel housing. Can be read without removing it from the water. 

The combi-thermometer can be used as a floating device and as a 

submerged device. The floating top can be removed. Colour: Blue. 


Lifebuoy -5ºC - +45ºC SC550 19,00 

Combi-thermometer 0ºC - +40ºC SC554 4,09 

THERMOMETER code 363 

- Accurate measuring (0,1ºC), range from -20,0 up to 100,0 °C. 

- MB270 has a ballasted waterproof sensor with 3 mtrs of cable for 

readings at different depths. 

- MB271 has a peg with 1 metre of cable. 

- Easy 0,0°C cal-check. Complete with battery. 


98509-01 MB270 74,50 

98509 MB271 29,00 

DIGITAL THERMOMETER WITH MEASURING PROBE code 809 

- Range: -5°C tot 70°C. 

- Big display, compact size. 

- Measuring probe with 1 metre of cable. 

- Easy to install. 


Digital thermometer SC553 5,25 

SOLAR THERMOMETER code 809 

Floating thermometer on solar power with digital display! 

Range 0° - 50 °C. 


Solar Thermometer SC555 20,55 

MB270 


UVC - OZONE - HEATING - AERATION AIR PUMPS 

AIR PUMPS 

DAB NOVAIR PROFESSIONAL AERATORS code 906 

NOVAIR 200 and 600 are aerators properly designed to create fine oxygen bubbles through the waste 

water of domestic Sequencing batch reactors (SBR) systems, pond ventilation, mixing of fluids without solid 

pieces and fish farms.Motor protection IP 68. Maximum liquid temperature 35°C. Water-resistant techno 

polymer pump body has been provided with robust designed base. 

Technical features: 

- Motor 0,18 to 0,4 kW with thermal protection and capacitor. 

- Working range: oxygen flow 2 to 17 m3 / h for a depth of 20 to 90 cm. Cable: H07RN8-F. 

- Protection: IP68, Isolation class: F. 

- Power: single phase: 220 to 240 V / 50 Hz. 

20 

18 

16 

14 

12 

10 

8 

6 

4 

2 

TYPE ART. 

NR. 

Air flow m³/h 

0 

0 10 20 30 40 50 60 70 80 90 100 110 


NOVAIR 200 

EURO P1 

MAX. 

NOVAIR 600 

Depth cm 

P2 HP AMP. MAX. 

AIR 

7 - 26 

MAX. 

DEPTH 

MIN. 

DEPTH 

Ø KG 

Novair 200 RK278 221,00 280 watt 0,18 kW 0,24 1,4 A 8 m³/h 80 cm 20 cm 1” 3,5 

Novair 600 RK279 347,00 630 watt 0,4 kW 0,54 3 A 17,5 m³/h 90 cm 20 cm 1¼” 5,4 

HIBLOW AIR PUMPS code 809 

The one and only, original HIBLOW air pumps! Unmatched quality! Durable air pumps with extreme 

low noise levels (31-45dB). Working temperature 5-40°C. 2 years warranty. 

Capacity Baby HiBlow: 0,4 mtr - 6,5 ltr/min. HP20: 1,0 mtr - 18 ltr/min. 

TYPE ART 

NR. 

EURO CAP. AT 

1,3 metre 

CAP. AT 

2 metre 

OUT- 

LET 

WATT KG dB 

BABY SC393 77,40 - - 5mm 8,5 - - 

HP-20 SC385 168,00 - - 18mm 17 - - 

HP-40 SC386 179,00 40 ltr/min 28 ltr/min 18mm 38 5,7 32 

HP-60 SC387 209,00 60 ltr/min 40 ltr/min 18mm 51 7 35 






AIR PUMP NITTO PISTON PUMP code 809 

Very reliable, economical, low noise, oil free air pump. It is piston operated instead of a membrane. High air pressure to a max depth 

of 2 - 2,5 metres (depending on model). Attention: the maximum head pressure can exceed 2 metres due to a long distance to the 

manifold, smaller diameter of the hose used and so on, regardless of the pond depth! When these pumps exceed more than 2 metres 

of head pressure there will be a great chance of failure. Advice: Recommended to fit a pressure gauge on the outlet to check outgoing 

pressure. 1 year warranty. . 

TYPE ART. 

NR. 

EURO IDEAL 

PRESSURE / 

OUTPUT 

MAX. 

PRESSURE/ 

OUTPUT 

OUT- 

LET 

WATT KG 

LA-28 SC110 184,00 1,1 mtr (32 ltr/min) 2 mtr (17 ltr/min) 18mm 29 2,9 

LA-45 SC112 211,00 1,1 mtr (50 ltr/min) 2 mtr (27 ltr/min) 18mm 47 3 

LA-60 SC113 281,00 1,5 mtr (78 ltr/min) 2,5 mtr (32 ltr/min) 18mm 64 5 

LA-80 SC114 313,00 1,5 mtr (85 ltr/min) 2,5 mtr (38 ltr/min) 18mm 86 5,3 

LA-120 SC116 515,00 1,8 mtr (128 ltr/min) 2,5 mtr (78 ltr/min) 26mm 130 9,4 



7 - 27 

AIR PUMPS 

AIR PUMP HIGH-BLOW ALITA code 809 

The High-blow Alita is the most reliable and powerful air pump in its price class. 

Excellent quality with a 3 years warranty! 

TYPE ART. 

NR. 


EURO CAP. AT 

1,5 metre 

CAP. AT 

2 metre 

OUT- 

LET 

MAX 

PRESSURE 

WATT KG dB 

AL-40 SC340 137,00 40 ltr/min. 30 ltr/min. 18 mm 3,5 mtr 40 5,6 36 


AL-80FD SC345 233,00 70 ltr/min. 60 ltr/min. 18 mm 5,0 mtr 80 6,5 39 



AIR PUMP DY-SERIE code 809 

DongYang has been producing air pumps of excellent quality for 40 years for industrial and medical applications. 

The design of the pumps is simple but good. The pumps are efficient, powerful and oil-free. The pumps have been 

used in aquaculture, ponds and aquariums for several years now. CE certified, 2 years warranty. Manifold not 

included. Extraordinary performance at 2 meter pressure! 

TYPE ART. 

NR. 

EURO CAP. AT 

1,2 metre 

CAP. AT 

2 metre 

OUT- 

LET 

MAX 

PRESSURE 

WATT 

DY-20 SC320 47,00 21 ltr/min. 14 ltr/min. 18 mm 3,4 mtr 30 






HI-FLOW V-SERIES AIR PUMPS code 809 

The V-series air pumps are powerful and low in noise. Casing is made of a high quality aluminum alloy. 

High output and pressure thanks to a double air chamber. 

Suited for continuous usage. 

TYPE ART. 

NR. 

EURO WATT CAP. AT 

1,2 metre 

CAP. AT 

2 metre 

MAX 

PRESSURE 

KG SIZE 

CM 

V-10 SC400 29,00 10 4 ltr/min - 2 mtr 1,3 13 x 12 x 10 

V-20 SC402 39,90 15 9 ltr/min 3 ltr/min 2 mtr 2,5 23 x 19 x 18 

V-30 SC404 49,00 25 17 ltr/min 7 ltr/min 2,5 mtr 3,5 25 x 20 x 20 

V-60 SC406 85,00 35 57 ltr/min 40 ltr/min 3 mtr 5,6 27 x 24 x 21 

AIR PUMP HAILEA ACO PISTON PUMP code 809 

Very competitive priced air compressors with pistons (no membranes!). 

Housing made of high quality aluminium alloy with cooling ribs. 

Low energy consumption, high air output. 

TYPE ART. 

NR. 


FLOW 

MAX 

PRESSURE 

KG SIZE 

MM 

208 SC436 22,80 16 35 l/m 1,5 m 0,9 142 x 80 x 78 

318 SC438 28,60 30 60 l/m 2,0 m 1,65 182 x 95 x 116 

328 SC439 43,50 60 70 l/m 3 m 2,80 199 x 108 x 133 


UVC - OZONE - HEATING - AERATION AIR PUMPS 

AIR PUMP 4000 / 8000 code 809 

Install the pump at a dry place above the water level. Comes with Ø 6 mm 

connections for 10 air hoses. Excluding air hose. 


FLOW 

Air Pump 4000 SC444 42,90 20 W 35 l/m 

Air Pump 8000 SC445 75,90 48 W 70 l/m 

AIR PUMP HAILEA ACO SERIES code 809 

High efficiency, high air output, low energy consumption. 

TYPE ART. 

NR. 



FLOW 

MAX. 

PRESSURE 

KG SIZE 

MM 

7701 SC142 8,10 3 4 l/m 1,3 m 0,33 133 x 67 x 62 

7702 SC146 12,30 4,5 2 x 4 l/m 1,5 m 0,56 152 x 78 x 74 

9601 SC147 7,95 2 3,2 l/m 1,2 m 0,40 136 x 78 x 68 

9602 SC148 10,95 5 7,2 l/m 1,2 m 0,53 162 x 100 x 87 

9610 SC149 19,90 10 10 l/m 1,5 m 1,60 187 x 145 x 95 

9630 SC151 37,90 15 16 l/m 1,5 m 2,7 248 x 176 x 137 

AIR PUMP SCHEGO code 809 

Quality air pump from Germany for aquaria and ponds, very quiet membrane pump. 

TYPE ART. 

NR. 

EURO LTR/ 

H 

ADJUS- 

TABLE 

WATT 

Ideal SC152 19,30 150 no 5 

Optimal SC154 25,10 250 yes 5 

M2K3 SC156 43,85 350 yes 5 

WS3 (3m pressure!) SC158 46,35 350 yes 5 

code code 809 

809 

7 - 28 

9602 

7701 

7702 

9610 

WS3 

3 metres 

pressure! 

AIR PUMP AIRMAC SOLO / DUO 24 VOLT code 809 

Fitted with a safety transformer (230V - 24V) and rain water proof air pump 

housing (IP24). Suited for outdoor use. Complete air pump sets for ponds 

and aquaria. These sets come with 10 meter air hose and air Stone. The 

Solo comes with 1 set, the Duo & Duo+ come with 2 sets. 


FLOW 

Air Mac solo 24 Volt SC448 31,00 90 l/h 

Air Mac duo 24 Volt SC449 36,00 2 x 90 l/h 

Air Mac duo+ 24 Volt SC450 47,00 2 x 300 l/h 

24 VOLT! 

9601 

9630 



7 - 29 

AERATION 

AERATION 

PLASTIC MANIFOLDS 4MM code 809 

TYPE ARTNR. EURO CONNECTIONS 

6 outputs without valve SC182 1,04 inlet 9mm, output 6 x 4mm 





4 MM AIR HOSE CONNECTORS code 666 


TYPE ART. 

NR. 

EURO TYPE ART. 

NR. 

EURO 

4 x 4 mm straight connector NH672 0,11 Straight 4 mm x M4 barb NH680 0,11 

4 x 4 mm 90° bend NH674 0,21 Valve M4 barb x M4 barb NH700 0,54 

4 x 4 x 4 mm “T” NH676 0,21 Valve M4 barb x 4 mm hose tail NH702 0,54 

4 x 4 mm cross piece NH678 0,32 Valve 2 x 4 mm hose tail NH704 0,54 

MANIFOLDS FOR 4 MM HOSE code 809 

TYPE ARTNR. EURO TYPE 

1 way valve SC216 1,01 A 

1 way valve SC215 0,74 B 

2 way valve SC217 1,01 C 

3 way valve SC218 2,12 D 

5 way valve SC220 3,61 D 

6 way valve SC222 8,45 E 




MANIFOLDS FOR 6MM HOSE code 809 

Chromed manifolds 6 mm with a valve. 


6 way valve SC263 20,40 


C 

A 

B 

D 

6 mm 

MANIFOLDS FOR 8MM HOSE code 809 

Chromed manifolds 8 mm with a valve. 





8 mm 

MANIFOLDS 9MM code 809 

Very practical air manifolds that can be precisely adjusted 

with a handy knob. Suited for wall mounting. 







9 mm 

E 


UVC - OZONE - HEATING - AERATION AERATION 

AERATION 

MANIDFOLDS 9MM HEAVY DUTY code 809 

Manifolds heavy duty. 


4 - way (9mm) SC366 34,25 

6 - way (9mm) SC367 45,05 

8 - way (9mm) SC368 54,70 

10 - way (9mm) SC369 65,75 


7 - 30 

9 mm 

ONE WAY 9MM VALVE code 809 

Universal set of fittings with elbow (18 mm internal), ball valve, hose tail 9 

mm and two clips. Suitable for e.g. Hiblow 40/60/80 en DY20/40/60/80. 


1 way valve 9mm SC214 8,30 

9 mm 

MODULAR MANIFOLD FOR 9 MM HOSE code 809 

Connectable ABS manifold with 3 outputs and with 9 mm connection. Can be glued. 

The end of the manifold system (A) is glue-capped (B); the manifold is attached to the air pump with a threaded adaptor socket (C) to 

3/4” in which a standard hose tail (D) or 3/4" to 20 or 25mm can be fitted. 

Use 9 mm valves (E) to close or adjust the individual airflows. 

TYPE ARTNR. EURO BOX 

3 way manifold (A) SC275 1,77 50 

End cap for manifold (B) SC276 1,34 50 

Threaded adaptor socket (C) AB132 1,81 - 

Hose tail ¾" x 19mm (D) SE124 0,89 - 

Valve 2 x 9mm hose tail (E) SE220 3,53 - 

9 mm 

D 

C A B 

SILICONE AIR HOSE 4MM code 509 

Very flexible en strong airhose on cardboard reel. 

SIZE ARTNR. EURO MTR 

Silicone air hose 4 x 6 mm KA239 0,27 100 

SILICONE 

CLEAR PVC (AIR)HOSE TYPE KRISTAL code 509 

SIZE 

MM 

ART. 

NR. 

EURO/ 

MTR 

MTR/ 

ROLL 

SIZE 

MM 

ART. 

NR. 

EURO/ 

MTR 

MTR/ 

ROLL 

4 x 6 clear KA240 0,25 25 mtr! 12 x 16 clear KA272 1,13 50 

4 x 6 clear KA244 0,25 100 12 x 16 green KA433 1,19 50 

4 x 6 green KA430 0,27 100 16 x 20 clear KA280 1,44 50 


9 x 12 clear KA266 0,65 50 18 x 22 clear KA283 1,62 50 


9 x 12 black KA438 0,68 100 20 x 24 clear KA288 1,77 50 

NON-RETURN VALVE 4 MM code 809 

Prevents water from entering the air pump. 


4 mm valve SC177 0,74 

E 



7 - 31 

AERATION 

PVC CHECKVALVE WITH HOSETAIL Code 145 

Check valve for hose. 

SIZE ARTNR. EURO B Z 

13mm (½”) AG120 3,31 50 28 

17mm (5/8”) AG122 3,39 50 28 

21mm (¾”) AG124 3,55 50 28 

AQUA JET VENTURI 2000 code 809 

Venturi with 50 mm glue-connection. Can be installed 

inside or outside the pond. MAXIMUM depth 2 metres. 

With air hose and reduction fittings. 

Now also available: Soft nose for damage prevention 

when end is submerged in the pond. 


Aqua Jet SC240 15,40 

Softness protection SC239 4,19 

SUPER AIR AERATOR code 809 

The Super Air is a pond aerator that requires less pump pressure than the regular Venturis. With a Venturi, as much as 50% of water 

flow may be lost, whereas with a Super Air the loss will only be 10 to 20%. The secret lies in the special Stainless Steel grid onto which 

the water flow passes at increased velocity. The form of the grid causes optimal turbulence and mixing of water and air, providing 

efficient oxygen exchange. Tests have shown that the yield (= oxygen uptake in water) in a Super Air is noticeably higher than in a 

normal Venturis with a reduced loss of water flow. 

APPLICATION: The Super Air must be placed at an angle of ± 45°, with the grid fully submerged. Make sure that the air intake is 

completely above water. It is also possible to instal the unit with the output above the water surface. Sometimes this is recommended 

when starting a new pond or filter, in quarantine and hospital tanks and in tanks with very heavy fish loads where ammonia and nitrite 

may occur due to insufficient biomass in the filters. The Super Air can separate part of those gasses. Placing the output above water 

level causes the gasses to be blown off into the air. ATTENTION: The Super Air is very sensitive for clogging of the grid by string algae 

(blanket weed). Some form of pre-filtration is therefore recommended to ensure continuous operation. The grid needs to be cleaned 

regularly with a (tooth)brush. 

TYPE ARTNR. EURO SIZE FLOW RATE 

superair 32 SC202 51,95 32 mm 3 tot 5.5m³/h 

superair 40 SC204 62,55 40 mm 5 tot 8m³/h 



LIMEWOOD AIR DIFFUSER FOR SALTWATER SKIMMERS code 809 

Limewood diffusers produce the finest bubble for the most efficient protein skimming. 

Optimal performance after 1 -2 days. Life span 4 - 8 weeks. 

SIZE ARTNR. EURO AIRHOSE 

55 x 20 x 20mm SC248 1,70 2 & 4 mm 


limewood 

AIR CURTAIN code 809 

Provides a very fine air diffusion and can be bend in any form. Connection 4 mm. Type B is fitted with 2 air intakes due to its lengths. 

TYPE ARTNR. EURO OUTPUT TYPE BOX 

20 cm SC194 1,17 0,6 -1,2 l/min A 120/1 

45 cm SC195 3,08 1 - 3 l/min A 120/1 

60 cm SC196 4,14 2 - 6 l/min B 120/1 

90 cm SC197 5,75 3 - 10 l/min B 100/1 

B 


UVC - OZONE - HEATING - AERATION AERATION 

TEST KITS 

AIR STONES HI-OXYGEN & BUDGET code 809 

Excellent quality grey/blue air stones, hardened with an aluminium alloy at high temperature (1300°C). The stones are very porous 

and produce very fine air bubbles for optimal aeration. Corrosion-free and shock-resistant. 

Suitable for oxygen, air, seawater and ozone in ponds, aquaculture, ozone generators and medical applications. 


TYPE ARTNR. EURO OUTPUT AIRHOSE BOX 

Round 3,2 cm (A) H-O SC232 1,26 0,5 - 1 l/min 4 mm 360/45 

Round 5 cm (A) H-O SC234 1,49 1 - 2 l/min 4/9 mm 192/12 

Disc 10 cm (B) H-O SC235 7,40 1 - 2 l/min 4/9 mm 80/10 

Disc 13 cm (B) H-OXYGEN SC236 9,15 2 - 4 l/min 4/9 mm 60/10 

Disc 13 cm (B) BUDGET SC230 6,65 2 - 4 l/min 4/9 mm 48 

Disc 20 cm (B) HI-OXYGEN SC237 26,30 10 - 25 l/min 9 mm 14/1 

Disc 20 cm (B) BUDGET SC231 19,05 10 - 25 l/min 9 mm 12 

Cylinder Ø 1,5 x 7 cm (C) H-O SC241 2,28 1 - 2 l/min 4 mm 

Cylinder Ø 3 x 8 cm (C) H-O SC242 4,35 1 - 2 l/min 4/9 mm 56/14 



Cylinder Ø 4 x 22 cm (C) H-O SC245 15,70 15 - 20 l/min 9 mm 40/10 

Cylinder Ø 4 x 30 cm (C) H-O SC246 27,60 20 - 25 l/min 9 mm 25/5 

ECONOMY AIRSTONES code 809 

Normal compressed air stones for general use. The colour of the air stones can vary. 

TYPE ARTNR. EURO OUTPUT AIRHOSE BOX 

Cylinder ± Ø 1,5 x 2,5 cm (A) SC160 0,16 0,5 - 1 l/min 4 mm 288/24 

Cylinder ± Ø 2,5 x 5 cm (A) SC161 0,48 0,5 - 1 l/min 4 mm 288/24 

Cylinder ± Ø 4 x 5 cm (A) SC164 0,61 1 - 3 l/min 4 mm 216/24 

Round 2,5 cm (B) SC163 0,20 0,6 - 1,2 l/min 4 mm 864/36 

Round 5 cm (B) SC165 0,73 1 - 3 l/min 4/9 mm 192/24 

Bar 10 cm (C) SC168 0,45 0,5 - 1 l/min 4 mm 432/24 

Bar 15 cm (C) SC170 0,62 1 - 2 l/min 4 mm 288/24 

Bar 30 cm (C) SC172 1,22 1 - 4 l/min 4 mm 144/24 

HDPE AIR DIFFUSERS code 809 

These new air diffusers are made of a special HDPE (high density polyethylene) en supply extremely fine air bubbles. By means of a 

special process the pore openings on the inside are 350 micron and 120 micron on the outside. Pressure loss is smaller than 0.015 bar 

(15 cm!). To install with rigid PVC pipes. For use with flexible air hose fill the diffuser with pea gravel for counter weight). 

Connection ½” fem.thr. 

Benefits: 

- Energy saving (up 25% less energy costs). 

- High airflow, less pressure loss. 

- Unbreakable, low in maintenance. 

TYPE ARTNR. EURO OUTPUT 

Ø70 x 80mm SC286 22,00 17 l/m 

Ø70 x 160mm SC287 32,35 33 l/m 

Ø70 x 250mm SC288 45,30 50 l/m 

Ø70 x 400mm SC289 65,75 83 l/m 

7 - 32 

A 

A 

B 

B 

C 

C 



AERATION 

AERATION 

n 

ZUURSTOFVERRIJKING 


7 - 33 

AERATION 

PROFESSIONAL MEMBRANE AERATION code 809 

Professional rubber membrane aerators. 

Suitable for industrial applications and for pond aeration. 

TYPE ARTNR. EURO OUTPUT 

Disc 25cm, ¾” male thr. SC260 28,60 33 - 133 l/min 

Disc 34cm, ¾” male thr. SC261 36,90 33 - 166 l/min 

Tube 65 x 5,6 cm, ¾” fem. thr. SC262 41,35 33 - 133 l/min 

BOTTOM AERATION code 809 

Bottom drain (“heavy duty”) with a rubber membrane dome (type 1) 

for the aeration of ponds. Diameter of the dome is 38 cm (air membrane 

Ø34cm). Recommended air flow is ± 20 ltr per metre water depth. 

Type 2 is a “free standing unit” aerator. Type 3 is an aerated dome to 

fit on existing bottom drain. 

NOTE: you can use the aerated dome on every bottom drain! The pipe 

connection to connect it to the dome is 50mm and 48,3 mm 

(English 1½ inch). Air hose adaptor 9mm. 


Complete bottom drain with aeration lid (1) SC280 110,00 

Free standing bottom aeration (2) SC281 93,75 

Aerated dome for 48,3 (1½”) & 50mm (3) SC282 76,15 

Complete bottom drain with aerated dome (4) with 

25 mm air connection on the bottom. 

SC284 64,90 

bottom drain with aeration 

25mm hose tail 

1 2 3 4 

SPINDRIFTER POND AERATOR code 809 

The Spin drifter Pond Aerator consists of a EPDM rubber 

membrane (diameter 250mm) mounted on a Polypropylene disk. 

The aerator is mounted on a steel support with nylon coating and 

weighs 5 kg in total. The Pond Aerator was designed to be placed 

on the bottom of the pond. The Aerated Dome was designed to be 

installed in an existing bottom drain and the Aerated Bottom Drain 

is a complete bottom drain with separate connection for the air 

hose. When air is blown into the membrane, the membrane 

inflates before any air bubbles are apparent. 

B 

check valve 

Air 

pump 

When it is fully inflated, air bubbles will escape through the 4500 

slits. When the airflow is interrupted, the membrane deflates and 

collapses, closing the slits before any water can flow back into 

the aerator. The required pressure to blow air through the slits in 

the membrane is 20 mbar at the recommended airflow. The 

recommended airflow in a koi pond is 20 ltrs/minute/metre depth 

per aerator for maximum oxygen exchange to the water. The 

drawing below shows how the aerator causes the water to 

circulate inside the pond. 


Pond Aerator (10mm air hose connection) (A) SC250 116,00 

Aerated Bottom Drain with 32 mm input for 10mm air hose (B) SC252 320,00 

Aerated Dome for standard bottom drain 110 with 48,2 mm connection (C) 

(10 mm air hose connection) 

SC254 150,00 

Aerated Dome for standard bottom drain 110 with 50 mm connection (10 mm air hose connection) (C) SC256 150,00 


UVC - OZONE - HEATING - AERATION TEST KITS 

TEST KITS 

ECO-CHECK 5 IN 1 TEST STRIPS FOR PONDS & AQUARIUM code 812 

Very reliable and easy to read quality test strips. 

- pH of 5,5 - 6,5 - 7,0 - 7,5 - 8,0 - 8,5 - 9,5. 

- KH Alkalinity of 0º - 2,3º - 4,5º - 6,7º - 10º - 17º - 40º dH. 

- GH Hardness of 0º - 1,4º - 4,2º - 8,4º - 17º - 56º dH. 

- NO2 Nitrite of 0 - 0,5 - 1,0 - 3,0 - 5,0 - 10 - 20 mg/litre. 

- NO3 Nitrate of 0 - 20 - 40 - 80 - 160 - 200 mg/litre. 



5-pad test strips (50 pcs) SC823 12,40 

AMMONIA TEST STRIPS FOR PONDS AND FRESHWATER AQUARIUM code 812 

NH3 Ammonia of 0 - 0,2 - 1 - 3 - 6 mg/litre. 

TEST PROCEDURE: 

1) Add 2 ml of water sample to be tested to vial. 

2) Dip one into the sample for 30 seconds with a gentle, steady up and down motion. 

3) Remove and discard the strip. 

4) After 3 minutes, using the enclosed colour chart, match vial to closest colour. 


1-pad test strip Ammonia (50 pieces) SC822 19,90 

MICROBE-LIFT PHOSPHATE TESTSTRIP FOR PONDS & AQUARIUM code 812 

To date, phosphate test kits have consisted of a bottle or tube with a liquid that has to be 

added drop by drop to a water sample. The idea is to count the number of droplets that are 

required to produce a sudden change in the colour of the sample. The number of droplets 

equals a given phosphate concentration. This is a relatively laborious method that is not 

very accurate given that the size of a droplet can vary considerably, depending on how 

hard you squeeze the plastic tube... The great advantage of this test method is that you 

don't have to count droplets, because the reagent is already on the test strip and simply 

dissolves as you move it up and down in the water sample. All you need to do is compare 

the colour of the sample with the colour card. The colour of the water sample in the test 

tube corresponds with the following phosphate concentrations: Yellow = 0.0 ppm (parts 

per million), Green = 0.2-1.0 ppm, Blue = >2.0 ppm. 


Phosphate test (50 strips) SC824 16,50 

KUSURI 5 IN 1 MULTI TEST KIT code 821 

This Multi Test Kit consist of 10 tests for these water values: 

- Ammonia (0, 0.15, 0.25, 0.5, 0.75, 1.0, 1.5 mg/l) 

- Nitrite (0, 0.1, 0.25, 0.5, 1, 2, 4 mg/l) 

- Nitrate (0, 10, 25, 50, 75 ml/g) 

- pH (6.8, 7.0, 7.2, 7.5, 7.8, 8.0, 8.4) 

- KH 

This test kit consists of original Palintest® components. 


Multi Test Kit (10 pieces) SF631 23,20 

7 - 34 



HANNA INSTRUMENTS 


7 - 35 


KUSURI TEST KITS code 821 

The Kusuri range of visual test kits all feature Palintest® technology 

components, they are the very best in visual test kits. All kits feature 

and easy to colour match plastic acetate card and are supplied with 

non-degradable foil sealed tablets. Each kit will do 30 tests. The 

trouble with visual test kits is matching the colour to the sample to 

ascertain a reading, our kits feature an accurate plastic acetate colour 

strip, when held up to a daylight source, it is far easier to compare 

than a paper printed chart. 

TYPE ARTNR. EURO BOX 

pH 6.8, 7.0, 7.2, 7.5, 7.8, 8.0, 8.4 (30 tests) SF630 16,45 4 

Ammonia (NH3/NH4+) 0, 0.15, 0.25, 0.5, 0.75, 1.0, 1.5 mg/l (30 tests) SF632 16,45 4 

Nitrite (NO2+) 0, 0.1, 0.25, 0.5, 1, 2, 4 mg/l (30 tests) SF634 16,45 4 

Nitrate (NO3+) 0, 10, 25, 50, 75 ml/g (30 tests) SF636 16,45 4 

KH (Alkalinity) 30 tests SF637 20,30 4 

Salinity 30 tests SF638 20,30 4 

POCKET TESTER FOR pH, EC/TDS & TEMPERATURE code 363 

The most diverse multi-purpose pocket tester on the market! Measures pH (0-14), as well as EC 

(0-20 ms), TDS and ºC (0-60°C)! Large display (2 lines), waterproof housing, 100% floating 

capabilities. 

Automatic calibration position, automatic temperature compensation. 

Excl calibration solutions. 


98130 MB267 183,00 

POCKET TESTERS code 363 

- Large and clear display, pH and EC meter equipped with automatic temperature compensation. 

- pH and ORP meters equipped with dirt repellent junction. 

- ORP meter equipped with an accurate Platinum electrode, 

- EC meter equipped with carbon, dirt repellent electrodes. 

- With protection cap, batteries and calibration screwdriver 

(pH and EC version). 

The pHep 4 has a large display (2 lines), a waterproof housing, 

100% floating capabilities, automatic-calibration function. Pocket 

testers come without calibration solutions. 


HI98128 pH (pHep 5) MB261 119,00 

HI98120 (ORP) MB263 156,00 

HI98312 (TDS) MB269 119,00 

98304 EC (DiST 4) MB265 69,00 

HI98127 pH (pHep 4) MB266 107,00 

CALIBRATION SOLUTIONS code 363 

Calibration solutions for Portable meters and Pocket testers.* Ask for availability. 

TYPE ARTNR. EURO PACK 

70004P buffer pH 4.01 MB340 33,75 1 (25 x 20 ml sachets) 

70007P buffer pH 7.01 MB342 33,75 1 (25 x 20 ml sachets) 

70030P EC 12,88 mS/cm MB344 33,75 1 (25 x 20 ml sachets) 

70031P EC 1413 µS/cm MB346 33,75 1 (25 x 20 ml sachets) 

* 70039P EC 5,00 mS/cm (for DiST 4) MB348 33,75 1 (25 x 20 ml sachets) 

7021L +240 mV Redox test solution MB354 31,25 460 ml bottle 


UVC - OZONE - HEATING - AERATION HANNA INSTRUMENTS 

MAINTENANCE SOLUTIONS code 363 

Maintenance solutions for Portable meters and Pocket testers. In 460 ml bottles. 




70300L Conservation solution for pH and ORP sensors and testers MB352 18,75 

7061L Cleaning solution for pH sensors and testers MB353 18,75 

PRONTO ORP / REDOX INDICATOR WITH ALARM SIGNAL code 363 

The Pronto is a simple-to-operate, practical meter for ORP (Oxidation Reduction Potential, or 

Redox) measurements and has been manufactured to serve as a monitor for swimming pools and 

spas. The Pronto front case incorporates a large, bright LED indicator. Should the measurements 

fall below the userselectable ORP values (350 to 850 mV), the red LED starts flashing to alert the 

operator of an undesired condition. The Pronto can also be applied for ponds with ozone systems, 

however with an alarm indication “in reverse”. For pools and spas it is important that the ORP does 

not fall below a certain value for proper disinfection of the water. For ponds it is important that the 

ORP value will not rise above a certain value. Since the LED indicator only flashes under the 

selected value we have to interpret this alarm in reverse for ponds. As long as the indicator LED 

flashes, the ORP value is not too high for fishponds. 

EXAMPLE: When the ORP value rises above 350 mV, the indicator LED stops flashing to 

indicate that the ORP value in the pond is too high. Range: -999 to +999 mV with a resolution 

of 1 mV. Accuracy at 20°C is ±5mV. The ORP electrode has a platinum sensor with 2 metres 

of cable. 12 volt adapter is included. Pronto casing also incorporates a moulded eye so that it 

can be installed with just a screw. 


Pronto ORP Set incl. ORP electrode (HI982401 + HI3214P/2) MB212 229,00 

+240 mV calibration (460 ml bottle) MB354 31,25 

Replacement ORP electrode (HI3214P) MB214 108,00 

WATERPROOF PORTABLE O2 METER code 363 

- Measures fast and easy the dissolved oxygen in mg/L and %. 

- Automatic temperature compensation, automatic calibration in air on 100%. 

- Membrane cover is easy to replace, completely delivered in a suitcase, including 

sensor with temperature sensor and 4 metres of cable, 2 reserve membrane covers, 

electrolyte and batteries. (excl. calibration solution). 


9146 (O2) MB210 712,00 

PORTABLE pH, EC & TDS METER code 363 

- Measures fast and simple the pH, EC, and TDS with the same sensor. 

- Automatic temperature compensation. 

- Easy calibration (1 or 2 points). 

- Completely delivered with battery (excl. calibration solution). 


9813 MB204 275,00 

7 - 36 




7 - 37 


HANNA POCKET PHOTOMETER code 363 

These pocket photo meters are specially designed for measuring phosphate & nitrite in fresh- and seawater and free 

chlorine in swimming pools and whirlpools. They are much more accurate than test kits and test strips and the results are 

displayed digitally. They are very light weighted, so easy to use at ponds, swimming pools and whirlpools. No more 

fussing around with test strips and comparing colours. 

Phosphate and Free Chlorine range: 0,01 to 2,50 mg/l (=ppm). Precision ± 5% from the read out value. Resolution 0,01 mg/l (ppm). 

Nitrite range: 0 to 200 µg/l (=ppb). Resolution 1 µg/l (ppb). NOTE! This is an ultra low range of 0 to 0,2mg/l nitrite! 

Alkalinity range for salt water (not suited for fresh water): 0 to 300 mg/l (=ppm) CaCO3, resolution: 1 mg/l (ppm) 

Calcium range for salt water (not suited for fresh water): 200 to 600 mg/l (=ppm) Calcium (Ca), resolution: 1 mg/l (ppm) 

Benefits: 

· Economic, fast and precise measurements 

· Clear to read digital display 

· Easy to operate, only one button 

· Virtually maintenance free. Auto shut down after 2 minutes 


HI713 Pocket photometer for phosphate MB280 62,50 

HI713-25 Reagents for phosphate MB281 11,25 

HI764 Pocket photometer for Nitrite MB284 62,50 

HI764-25 Reagents for Nitrite MB285 11,25 

HI701 Pocket photometer free chlorine MB287 92,00 

HI701-25 Reagents for free chlorine (25) MB288 9,90 

HI755 Pocket photometer alkalinity (KH) for salt water MB290 62,50 

HI755-26 Reagents alkalinity (KH) for salt water (25) MB291 9,90 

HI758 Pocket photometer Calcium in salt water MB293 62,50 

HI758-26 Reagents Calcium in salt water (25) MB294 9,90 

NITRITE PHOSPHATE FREE CHLORINE 

ALKALINITY & CALCIUM FOR SALT WATER 

ELECTRONIC ION SPECIFIC METERS code 363 

Beware: Order with associated reagents! * Ask for availability. 


HI96700 Ammonia MB251 348,00 

* HI96707 Nitrite MB253 348,00 

* HI93728 Nitrate MB254 348,00 

* HI93732 Dissolved oxygen MB256 348,00 

MULTI RANGE ELECTRONIC ION SPECIFIC METER code 363 

Professional photometer for ammonia, free- and total chloride, copper, 

nitrate, nitrite, dissolved oxygen, pH and phosphate (total 13 parameters 

possible!).Completely delivered with 2 measurement cells including button, 

batteries and 12 VDC transformer.Note: Order with associated reagents! 


C 203 (Multi) MB230 695,00 

REAGENTS FOR ION SPECIFIC METERS code 363 

Reagents at the purchase of the photometer and as a supplement. * Ask for availability. 

TYPE ARTNR. EURO PACK 

93703-50 Cuvets Cleaning solution 230ml MB360 32,50 230ml 

93700-01 Ammonia LR (0,00-3,00 mg/l), for C203 & H 93700/96700 MB370 59,00 100 tests 

93707-01 Nitrite LR (0,00-0,35 mg/l) for C203 & HI 93707/96707 MB372 39,50 100 tests 

93728-01 Nitrate (0,0-30,0 mg/l) for C203 & HI 93728 MB374 82,50 100 tests 

93710-01 pH (6,5-8,5) for C203 MB375 26,25 100 tests 

93732-01 Dissolved oxygen (0,0-10,0 mg/l) for C203 & HI 93732 MB376 81,25 100 tests 

93721-01 Iron for HI93721 MB377 28,75 100 tests 

* 93735-00 Total hardness (0-250 mg/l) for HI 93735 MB378 48,75 100 tests 

* 93735-01 Total hardness (200-500 mg/l) for HI 93735 MB380 48,75 100 tests 


UVC - OZONE - HEATING - AERATION HANNA INSTRUMENTS 

GLASS CUVETS code 363 

Glass cuvets for photometers. 10ml Content. Set of 4 pieces. 



Glass cuvets 10ml. set of 4 pcs. MB362 27,50 

SINGLE TESTKITS code 363 

Test kits for a simple and economical analysis of your pond water. 


TYPE ARTNR. EURO NUMBER OF 

TESTS 

* 3810 Dissolved oxygen (0-10 mg/l) MB300 85,00 100 

* 3812 Total hardness (GH) (0-300 mg/l) MB302 32,50 100 

* 3811 Alkalinity [also Carbonate hardness (KH)] (0-300 mg/l) MB303 51,00 100 

* 3824 Ammonia (0-2,5 mg/l) MB304 43,75 25 

* 3881 pH (6,0-8,5) MB312 47,50 100 

COMBINATION TEST KIT SALT- & FRESHWATER AQUARIA code 363 

- Ammonia (0-2,5 mg/l). 

- Nitrate (0-50 mg/l). 

- Nitrite (0-1 mg/l). 

- pH (6,0-8,5). 

- Including reagents for 50 tests from each parameter. 


3893 MB322 88,75 

7 - 38

uvc - ozone - heating - aeration 2013 - SIBO

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?