WALKER 500 SERIES SERVICE FITTINGS Four-Piece ... - Nedco

505HB HOUSING®
Housing and base plate
for all four-piece fittings.
WALKER 500 SERIES
SERVICE FITTINGS
Four-Piece Fitting Components
500B BLANK FACEPLATES
Blank faceplates for all
four-piece fittings.
500DR DUPLEX FACEPLATE"
Accepts duplex receptacles.
SOOT COMMUNICATION FACEPLATE
1" [25mm] I.D.
grommeted opening.
500-GFI GFI FACEPLATE ®
Accepts GFI receptacle.
2 5/8"
[67mm]
A
II
25/8" T I
[67mm] ILL.
2 5/8"
[67mm]
G1 See Section P2 tor Activate Duplex 106 Keystone Frame and Jacks.
4 1/2"
[114mm]
4 1/2"
[114mm]
4 1/2"
[114mm]
41/2"
[114mm]

UMITWION OF LIABILITY
The Wiremold Company's sole obligation (and buyer's sole and exclusive remedy) with respect to any goods that are proven to be
defective shall be the repair or replacement of such goods, at The Wiremold Company's option.
The Wiremold Company shall not be liable for any damages in excess of the purchase price of such goods and under no circumstances
shall The Wiremold Company be liable for incidental or consequential damages or losses of any nature or description whatever.
Certain products may have a specific Warranty or Limitation of Liability different from the above and are included with the goods
affected, and the terms of any such specific warranty or limitation of liability will supercede the above.
To better serve your project requirements, The Wiremold Company strives to improve products on a continuous basis. The information
and/or specifications contained in this catalog may change without prior notice.
Wiremold Raceways and Fittings are listed by Underwriters Laboratories Inc. and the Canadian Standards Association. Registered
Trademarks of The Wiremold Company and its subsidiaries include: Airey-Thornpson, CabinetMATE, Cable Tuck, Centerex, Chan-L-
Wire, ColorMatch, CordMate, Corduct, EndZone, EZ-Pole, Fantom Flex, Flexible Pancake, Flushduct, HideAcord, Linetamer, N-R-G-
Bloc, N-R-G-Flor, On-Wall, Pancake, PanelZone, Perma Power, Plug-In Outlet Center, Plugmold, Plugmold Plus, Plugtrim, Power
Commander, Power Tender, Presource III, Quick-E-Pole, Quick Tap, Resource RFB, Sentinel Lighting, Sentrex, Snapicoil, Sockets Plus,
Sonic Connections, Sonicrimp, Source I, Source II, Sure-Snap, SurgeREACTOR, Synergy, Tele-Power, Thin Mau, Uniduct, Walker,
Walkerbox, Walks-cell, Walkerdeck, Walkerduct, Walkerduct Pro, Walkerflex, Walkermold, Walkerpole, Walkertap, Wire Light,
Wiremold, and Wiring Projects Made Easy. Trademarks of The Wiremold Company include Access, Activate, AnySize, CLub
Performance, CrossWay -110, DoubleUPS, EntryZone, EZ-Flex, FtberReady, FibreReady, FiberSmart, FibreSmart, FlexiGuard,
FloorSource, Future Proof, Interlink, Interlink Label, Isoduct, Modulink, Multiplex, Omnibox, On-Call, Prewired Select, ProComm,
Profile Series, Quick Fit, Ratchet-Pro, RCI, ScuffCoat, Senflex, Size-Up, Source III, SpecMete, SurgeMan, Terminal, Twin Snap, V200,
V500, V700, Wall Ready, WallSource, and Wiremold Logistics. Wiremold Prewired XPress is a Service Mark of The Wiremold
Company. All brand and product names are registered trademarks or trademarks of their respective holders.
All Wiremold products, unless specifically noted, are listed by Underwriters Laboratories Inc. and conform to Federal Specifications
W-C-582 and the National Electrical Code. Products designed for use in telephone or communications wiring normally do not require
UL listing. Most products in this catalog are also certified by the Canadian Standards Association. Special ordering information for
products to be installed in Canada is available upon request.
© Copyright 2000 The Wiremold Company All Rights Reserved

mam & BIMFUS
WALKER 5OO / SOS SERIES
SERVICE FITTINGS
• Die cast aluminum with satin finish. Durable construction
provides a product that continues to perform and maintain
a good appearance after years of service.
• Unique three-position base plate. Permits fitting to be
centered or adjusted 3/4" 119.1mm] to either side of
the center. This flexibility allows the fitting to be placed
clear of furniture, equipment or adjacent fittings.
• Two-piece style. Service openings are cast as part of the
housing. There are fewer pieces to assemble, which simplifies
and speeds installation.
• Four-piece style. Accommodates two removable faceplates.
Choice of blank, power and communications faceplates.
Choose this style of the 505 Series fitting for
greater flexibility. Plates can be replaced as necessary to
adapt the fitting to changing service requirements.
• Interlink Activate DTP, STP, coaxial, audio, video and fiber
optic inserts. A wide variety of media interface inserts
ensure a solution for today's most demanding communication
system designs.
• Fittings provide single service. Multiple fittings are
required for two or more services. The four-piece fittings
have a capacity of 27 cu. in. [442mm 3 ). The two-piece
fittings have a capacity of 25 cu. in. [410mm 2 ].
NOTE: Refer to EDBB5 Cut Sheet tor additional information. G1-3