Hoffman Catalog Drawing Specification - Nedco

quebec.nedco.ca

Hoffman Catalog Drawing Specification - Nedco

Hoffman Catalog Drawing Specification

Industrial Enclosures: Wall-Mount: CONCEPT® Enclosures, Single-Door

Catalog

Number

Size

Height

A

(inch)

Height

A

(mm)

Width

B

(inch)

Width

B

(mm)

Depth

C

(inch)

Depth

C

(mm)

Door

Ga.

Body

Ga.

CONCEPT

Panel

Catalog

Number

CSD16168 16.00x16.00x8.00 16.0 406.0 16.0 406.0 8.0 203.0 16 16 C-P1616

Panel Panel

Mounting Mounting

Size Size

Latches Latches J J

G x H G x H

D x E D x E

(qty) (style) (inch) (mm)

(inch) (mm)

(inch) (mm)

14.20

361 x 14.50 x

x

361 14.50

14.20

368 x 368 1 Qturn. 8.00 203

Application

CONCEPT® enclosures house and protect your sensitive electrical or electronic components from

harsh, dirty environments. For use in installations where dirt, dust, oil, water, or other contaminants

are present. Streamlined styling, flush latching, and an attractive durable finish complement other

electronic equipment.

Construction

• 16 or 14 gauge steel

• Seams continuously welded and ground smooth

• Minimum width body flange provides maximum door opening (210°)

• Body flange trough excludes liquids and contaminants

• Panel mounting studs fit optional CONCEPT® panels and other accessories

• Mounting holes in back of body for direct mounting or for optional external wall-mounting brackets

• Hidden hinges for clean aesthetic appearance

• Doors are interchangeable and easily removable by pulling captive hinge pins

• Seamless foam-in-place gasket provides oil-tight and dust-tight seal against contaminants

• Optional handles and inserts available

• Self-grounding latch system with double seal provides maximum protection against leakage

file:///C|/Documents%20and%20Settings/David.Sarf...top/Work/HoffmanTech/Hoffman-Tec-CSD16168-En.htm (1 of 3) [2005-07-14 10:29:08]


Hoffman Catalog Drawing Specification

• Integral body grounding stud

• Provision for thermoplastic data pocket on solid door styles (right door on two-door models)

• Provision for optional door stop kit on solid door styles

• Furnished hardware kit consists of panel mounting nuts, panel grounding hardware, and sealing

washers for wall mounting holes

• Installation instructions for enclosure and accessories are provided

CONCEPT® single-door enclosures with solid door

• Door bar on hinge side for wire management and bonding

• Additional door bar on larger doors for extra rigidity

• Patented quarter-turn latches or a 3-point latch system on larger enclosures, furnished with flush

slotted insert. Optional handles or inserts are available.

CONCEPT® single-door enclosures with window

• Clear polycarbonate window is flush with door surface

• Quarter-turn latch(es) with flush slotted insert.

CONCEPT® flush-mount enclosures

• Mounting frame extends completely around enclosure

• Quarter-turn latch(es) with slotted insert.

CONCEPT® two-door enclosures

• Patented overlapping door design provides full-width access

• Door bars on each door for wire management and bonding

• 3-point latch system on right door furnished with flush slotted insert

Finish

Two standard finishes are available over phosphatized surfaces: ANSI 61 gray polyester powder

paint inside and out, or RAL 7035 textured light gray polyester powder paint inside and out.

Optional panels are white.

Notes

Patents:

Cabinet with Overlapping Double Doors 5,465,528 (U.S.)

Combined Handle and Lock Unit

D360,345 (U.S.)

DEM 9405854.7 (Germany)

Enclosure Latch 5,509,703 (U.S.)

Hinge System 5,666,695 (U.S.)

EN 0729541 (Europe)

Other patents pending.

Options

Modification Services Program

You can customize this product to your unique requirements by specifying from these options:

• Enclosure height, width, depth (not available on window door enclosures)

• Over 100 standard finish colors and textures

• Holes and cutouts in body, doors, subpanels

• Tapped holes, fasteners in enclosure or subpanel

• Doors

• Subpanels

• Structural changes

• Environmental control (louvers, fans, filters)

• Windows (not available on window door enclosures)

• Standard accessories

file:///C|/Documents%20and%20Settings/David.Sarf...top/Work/HoffmanTech/Hoffman-Tec-CSD16168-En.htm (2 of 3) [2005-07-14 10:29:08]


Hoffman Catalog Drawing Specification

To order, contact your local Hoffman sales representative.

Standards

Wall-mounting brackets required to maintain UL/CSA external mounting requirement.

• CONCEPT® solid single-door and flush-mount models

UL 508A, 508, File No. E61997: Type 4 and Type 12

NEMA/EEMAC Type 4, Type 12, and Type 13

CSA, File No. LR42186, Type 4 and Type 12

VDE IP66

IEC 60529, IP66

•CONCEPT® single-door models with window

UL 508A, 508, File No. E61997: Type 4 and Type 12

NEMA/EEMAC Type 4 and Type 12

CSA, File No. LR42186, Type 4 and Type 12

VDE IP66

IEC 60529, IP66

Accessories

Adjustable Mounting Kit

Corrosion Inhibitors

Data Pocket (except window door style)

Dead Front Kit

DIN3 Rail Kit

Door Stop Kit (except window door style)

Electric Heater

Fan Cooling Products

Grid Straps

Handles and Latches

Key Inserts

Lighting Kits

Mounting Channels

Panel Conversion Kit

Panels

Panels, NEMA

Pole Mounting Kit

Rack Mounting Angles

Swing-Out Panel Kit

Swing-Out Rack Frames

Terminal Block Kit Assembly

Touch-Up-Paint (ATPPY61 for ANSI 61 or ATPG7035 for RAL 7035)

Wall-Mounting Bracket Kit

Wiring Duct

file:///C|/Documents%20and%20Settings/David.Sarf...top/Work/HoffmanTech/Hoffman-Tec-CSD16168-En.htm (3 of 3) [2005-07-14 10:29:08]

More magazines by this user
Similar magazines