K-Probes - General Tools And Instruments

RTD AND "K" TYPE
PROBES
CAT11
Precision, Specialty and Innovation

TEMPERATURE
TEMPERATURE
RTD Probe and “K” Type Probes
I-52
All “K” type probes fit and work with: DT8801, DT8803, DT307-25, DT8852, DT721, DT306DL, DT309DL, DT8811WP
RTDTP100
TPK02
TPK04
TPK500
TPK900
TPKPP
SSP144
SSP146
PRECISION PT 100 OHM TEMPERATURE PROBE FOR
GENERAL’S THERMOMETERS WITH RTD JACKS
Measurement Range: -58° to 752°F (-50° to 400°C)
Impedance: 100
UPC NO.
01436 3 RTDTP100
GENERAL PURPOSE “K” TYPE PROBE WITH CORD
Measurement Range: -58° to 482°F (-50° to 250°C)
Probe length: 3.75 in.
Cord length: 4 ft.
UPC NO.
25001 3 TPK02
AIR TYPE PROBE WITH CORD
Measurement Range: -40° to 950°F (-40° to 510°C)
Probe length: 8 in.
Cord length: 4 ft.
UPC NO.
25004 4 TPK04
GENERAL PURPOSE BEADED TIP PROBES
Measurement Range for TPK500: -50° to 500°F (-45° to 260°C);
for TPK900: Up to 900°F (482°C)
Wire length: 3.125 ft.
UPC NO.
25015 0 TPK500
25020 4 TPK900 (Hi Temp)
EXPOSED TIP “K” TYPE PROBE WITH CLAMP
Measurement Range: -58° to 1202°F (-50° to 650°C)
Wire length: 6 ft.
UPC NO.
25060 0 TPKPP
PLUG-IN “K” TYPE SURFACE PROBE
Measurement Range: -40° to 950°F (-40° to 510°C)
Probe length: 8 in.
Best if used with probe extender Model TPKH (see page I-53)
UPC NO.
25045 7 SSP144
PLUG-IN “K” TYPE AIR PROBE
Measurement Range: -40° to 500°F (-40° to 260°C)
Probe length: 8 in.
Best if used with probe extender Model TPKH (see page I-53)
UPC NO.
25055 6 SSP146
Toll Free 800-697-8665 Fax 212-431-6499 www.generaltools.com
ALWAYS WEAR
OSHA APPROVED
SAFETY GOGGLES

All “K” type probes fit and work with: DT8801, DT8803, DT307-25, DT8852, DT721, DT306DL, DT309DL, DT8811WP
HIGH TEMPERATURE PROBE WITH CORD
Molten metal probe
For high temperatures
Measurement Range: Up to 2500°F (1347°C)
Wire length: 2 ft.
UPC NO.
25080 8 TPK2500
SURFACE SENSOR “K” TYPE PROBE WITH CORD
Measurement Range: -40° to 950°F (-40° to 510°C)
Probe length: 8 in.
Cord length: 4 ft.
UPC NO.
25003 7 TPK03
PIERCING “K” TYPE PROBE WITH CORD
Measurement Range: -40° to 1562°F (-40° to 850°C)
Probe length: 8 in.
Cord length: 4 ft.
UPC NO.
25005 1 TPK05
BEADED TIP “K” TYPE PROBE WITH OVEN CLIP
Measurement Range: -40° to 950°F (-40° to 510°C)
Heavy duty clip
Wire length: 4 ft.
UPC NO.
52504 0 OC119
PLUG-IN “K” TYPE PIERCING PROBE
Measurement Range: -40° to 1562°F (-40° to 850°C)
Probe length: 8 in.
Best if used with probe extender Model TPKH
UPC NO.
25050 1 SSP145
“K” TYPE THERMOCOUPLE PROBE EXTENDER
Extender with handle for use with interchangeable probe tips
Cord length: 4 ft.
UPC NO.
25070 9 TPKH
SUPER HIGH TEMPERATURE PIPE CLAMP
THERMOCOUPLE
Measurement Range: -58° to 900°F (-50° to 482°C)
Measurement Accuracy: ±4.5°F (±2.5°C) from -58° to 662°F
(-50° to 350°C); above 662F, accuracy is defined as
± (reading x 0.0075)
Jaw Opening: 0.12 to 1 in. (3 to 25mm)
Coiled Cable Extended Length: 6.6 ft. (2m)
Weight: 9.7 oz. (275g)
UPC NO.
01513 1 TPC20
TEMPERATURE
“K” Type Probes & Pipe Clamp
“It’s Your Job . . . General Tools Make It Easier”
TPK2500
TPK03
TPK05
OC119
SSP145
TPKH
TPC20
I-53
TEMPERATURE

“Man is a tool using animal. Weak in himself and of small
stature, he stands on a basis of some half-square-foot, and
has to straddle out his legs lest the very winds supplant him.
Nevertheless, he can use tools, can devise tools; with these
the granite mountains melt into light dust before him; seas
are his smooth highways, winds and fire his unwearying
steeds, Nowhere do you find him without tools. Without tools
he is nothing, but with tools he is all.”
Thomas Carlyle (1795–1881)
“It’s Your Job . . . General Tools Make It Easier”
GENERAL TOOLS & INSTRUMENTS 80 White Street, New York, NY 10013-3567
PHONE (212) 431-6100 FAX (212) 431-6499 TOLL FREE (800) 697-8665
e-mail: gentools@generaltools.com
www.generaltools.com
Catalog No. CAT11 Printed in USA Effective June 2011
©2011 GENERAL TOOLS & INSTRUMENTS 6/11 20M
Not responsible for typographical errors.