PHWS Spec Sheet 0204 - Boydco.com

PHWS/SEHW SPECIFICATIONS
PART NUMBER PHWS3-11021D PHWS4-20021A,B,C,G,H PHWS4-30021A,B,C,F,G,H PHWS5-30021B,C,F,H SEHW6-35021B,C,H
DISCHARGE GPM (LPM) 2.8 (10.6) 4.2 (15.9) 3.5 (13.2) 4.8 (18.2) 5.2 (19.7)
OPERATING PRESSURE PSI (BAR) 1000 (69) 2000 (138) 3000 (207) 3000 (207) 3500 (241)
OPERATING TEMPERATURE Ambient to 200°F (93°C)*, Maximum Temperature Rise of 140°F (77°C), 275°F (135°C) in Steam Mode
B.T.U. PER HOUR 269,800 404,700 309,560 426,000 486,990
BURNER Oil Fired, Automatic Light
FUEL TYPE Kerosene, Stove Oil, Diesel
FUEL CONSUMPTION GPH (LPH) 1.50 (5.68) 2.25 (8.52) 1.75 (6.62) 2.50 (9.46) 2.75 (10.41)
FUEL TANK CAPACITY Gallons (Liters) 11 (42) 11 (42) 11 (42) 11 (42) 10 (38)
BURNER MOTOR HP .2 .2 .2 .2 .2
IGNITION Transformer Transformer Transformer Transformer Transformer
COIL A 53 1/2" Schedule 80 Schedule 80 Schedule 80 Schedule 80 Schedule 80
PUMP Tri-plunger Tri-Plunger Tri-Plunger Tri-Plunger Tri-Plunger
PUMP MOTOR HP 2 6 7.5 10 15
Volts/Phase/Total Amps D: 120V 1Ph, 20 Amps A: 230V 1 Ph, 29 Amps A: 230V 1 Ph, 36 Amps B: 230V 3 Ph, 34 Amps B: 230V 3 Ph, 37 Amps
B: 230V 3 Ph, 19 Amps B: 230V 3 Ph, 27.5 Amps C: 460V 3 Ph, 15 Amps C: 460V 3 Ph, 19 Amps
C: 460V 3 Ph, 9.5 Amps C: 460V 3 Ph, 17.5 Amps F: 575V 3 Ph, 15 Amps H: 208V 3 Ph, 42 Amps
G: 208V 1 Ph, 31 Amps F: 575V 3 Ph, 15 Amps H: 208V 3 Ph, 36 Amps
H: 208V 3 Ph, 17.5 Amps G: 208V 1 Ph, 38 Amps
H: 208V 3 Ph, 27.5 Amps
CORD & PLUG 36' w/ GFCI & 20 amp Plug 36' w/ GFCI (No Plug/GFCI on 3 Ph) 36', No Plug 36', No Plug 36', No Plug
PAINT Epoxy Powder Coating
HOSE 50' x 3/8" I.D. 5800 psi Insulated Wire Braid with Coupler
GUN & WAND Insulated Shut-off w/ Stainless Steel Variable Pressure Wand
NOZZLES Hardened Stainless Steel (0°, 15°, 25°, 40°)
CHEMICAL CONTROL Precision Needle Metering Valve
WHEELS Mag, 2 Ply Tubed Pneumatic 10" x 4.00" Wide Stance Optional Wheel Kit
LENGTH/WIDTH/HEIGHT 49" x 31.5" x 37" (124cm x 80cm x 94cm) 43"/31"/43" (109cm/79cm/109cm)
SHIPPING WEIGHT Lbs (Kg) 545 (247) 615 (279) 675 (306) 650 (295) 626 (285)
Note: We are constantly improving and updating our products. Consequently, pictures, features and specifications in this brochure may differ slightly from current models. There may be slight variances in gallonage and pressures
due to variances allowed by manufacturers of our machine components. We attempt to keep our machine performance ±5% of listed specifications. This equipment intended for outdoor use only. Customer is responsible
for any permits, compliance with codes, or other government requirements associated with the installation, use, or disposal of waste associated with this equipment. * When incoming water temperature is 60°F (16°C).
ACCESSORIES FOR PRESSURE WASHERS
Water Jet: Hot/cold water
rotary surface cleaner
PG: The workhorse of coldwater
pressure washers
World Headquarters
REGISTERED
MEMBER OF Made in USA
CLEANING EQUIPMENT TRADE ASSOCIATION
SandBlaster: Dust-free
cleaning of metal, concrete
PHW: The irontough
hot-water washer
WATER CLEANING SYSTEMS
Swivel Hose Reels: For
tangle-free handling
Form #96-001 • © Copyright 2001 • 9/01 • LANDA • 4275 NW Pacific Rim Blvd., Camas, Washington 98607 USA
®
SGHW: Heavy-duty hotwater
cleaning muscle
www.landa.com
Rotary Nozzles: For
extra cleaning power
Detergents: LANDA offers a broad selection of
detergents specially designed for pressure washers
SOLUTIONS OTHER EQUIPMENT FROM LANDA
SJ Top Load: Parts washer
with water-propelled spray bar
DISTRIBUTED BY:
SJ Front Load: Aqueous
parts washer for large parts
®
PRESSURE WASHERS PHWS
PLATINUM SERIES
and SEHW
PORTABLE • HOT WATER • ELECTRIC POWERED • OIL HEATED
PHWS4-20021A
CERTIFIED TO UL SAFETY STANDARDS • CETA PERFORMANCE CERTIFIED • ISO-9001 COMPANY
HOT AND COLD WATER
PRESSURE WASHERS
AUTOMATIC AQUEOUS
PARTS WASHERS
ACCESSORIES
AND PARTS

PHWS
Heavy-Duty Magnetic Starter: With overload
protection allows low voltage at On/Off
switch for greater operator safety.
Flow Activated Fuel Shut-Off Switch:
Automatically shuts off burner when trigger
gun is closed (not visible).
Time Delay Shutdown: Automatically shuts
down unit after 1 to 10 minutes of non-use.
Wheel Brake: Lever actuated brake keeps unit
from rolling for added safety (not visible).
Easy-To-Access Burners: High-efficiency
burner is protected with a cover and mounted
so that it can be easily accessed for servicing and
adjustments.
Temperature Control: For adjusting water
temperature.
Fuel Cap with Gauge: Ventilated fuel cap
with fuel level indicator.
Hour Meter: Monitors usage for maintenance
scheduling.
Elevated Fuel Line: Fuel line enters from
above and is positioned above the tank bottom
to keep dirt from plugging the fuel line.
Electrical Cord: Extended length of 36 ft.
of high-grade electrical cord; GFCI on
single phase models for operator
protection.
Mag Wheels: Two-piece, aluminum-mag
rims for long life and
convenient servicing.
Insulated Variable Pressure Wand:
Easy-to-adjust dual-lance, stainless steel wand
for operator control of the pressure.
Motor and Pulleys: Industrial-strength motor
and cast-iron, bushing pulleys—with convenient
2-bolt pulley adjustment—for easy maintenance
and longer life (not visible).
V-Groove Belts: Notched and cogged belts for
better grip and longer belt life (not visible).
Motor Thermal Overload Protection: Shuts
down motor if temperature becomes excessive
due to problems in power supply (not visible).
THE MOST POPULAR HOT-WATER PRESSURE WASHER SINCE 1980
Discover the Many Reasons LANDA is the Only Pressure Washer Built to Last!
Tri-Plunger Pump: Tri-plex
forged brass head pump with
thermal pump protector has
5-year warranty on oil-end of
pump, lifetime on brass head
(not visible).
Made in USA
Tubed Pneumatic
Tires: 2-Ply air-filled,
all-terrain tires make for
easy maneuvering, even
in loose gravel; they
also absorb shock and
vibration, to prevent the
jarring of components.
Quick Coil Access:
Unique Landa design
provides easy access to
the coil. Remove six
bolts and the cover lifts
off exposing the coil.
Insulated
Spring-Loaded
Trigger Gun: For
safe control of high
pressure spray and
convenience of
remote operation.
FOR BEST
RESULTS USE
LANDA
DETERGENTS
ONLY
Cleaning Equipment Trade Association
Performance
Certified
Manufactured To Cleaning Equipment Trade Association Performance Standards
Protective Cover:
Attractive brushed
stainless steel cover
gives added weather-resistantprotection.
TM
®
Certified
to UL-1776
Standards
Adjustable Unloader: Bypasses pressure in pump when
trigger gun is closed. (not visible).
Rupture Disk: Attached to discharge side of heating coil to
protect against excessive pressure buildup (not visible).
Brass and Steel Fittings Throughout: JIC fittings are
easy to service and prevent corrosion (not visible).
DuraCoil: High-heat steel inner wrap surrounds wellinsulated,
cold-rolled coil for a long life of efficient, leak-free
operation. Coil has a limited 5-year warranty.
Tri-Lingual Labels: Instructions in English, Spanish, and
French.
Chrome-Plated Push Handles:
Waffle grips for easy loading and maneuvering
of pressure washer.
Stainless Steel Chemical Metering Valve: Antisyphon
soap valve locks out air and allows precise amount of
detergent.
Polyethylene Float Tank: Corrosion resistant tank has
stainless steel inlet filter and low-turbulence float valve with
anti-siphon protection.
Quick-Release Nozzles: Four color-coded nozzles (for
adjusting the spray pattern) are conveniently mounted and
easy to attach and detach.
Electrical Compartment: Water-resistant control box is
easily opened for quick service access to wiring and controls.
Slide-Out Service Platform: Unique Landa innovation,
in which pump, unloader, pulleys, belt, and motor slide
out. It makes the PHWS a service technician’s dream.
Steam Valve: Quickly and easily changes
hot-water washer into “wet” steam cleaner
(not visible).
Oil-Water Separator: High quality
Landa filter removes water from the
diesel or fuel oil before it can damage
the fuel pump (not visible).
High-Pressure Hose: 50 ft. of
3/8" double wire braid hose with
quick coupler rated for up to 5800 psi.
Inlet Chemical Injection: For introduction
of detergents in a high-pressure
application.
Swivel Swedge Fitting: For twist-free
maneuvering of hose and trigger gun.
24" Safety Hose Guard: Gives strain relief to hose connection
and diverts spray from operator in the event of hose
failure.
SEHW: SKID MOUNTED
• Electric-powered
• 5.2 gpm, 3500 psi
• Belt-drive, Tri-plunger
Pump
• Diesel-heated
• 10 gallon fuel capacity
HISTORY
THE test of time is the
best way to judge a pressure
washer.
LANDA’s popular line of
PHWS (Portable Hot Water)
electric, oil-fired washers has
met the challenge.
Since the first PHWS came
off the line in 1980, LANDA
has rolled off more than 25,000
units of this popular washer.
When LANDA engineers created
the PHWS, the nowfamous
“lay down” hot-water
washers, with their energy-efficient
horizontal coils, were just
beginning to make inroads in
the marketplace.
LANDA carefully analyzed
competitor models and settled
on a new design that corrected
• 15 hp Baldor Motor
• 230V 3 ph, 460V 3 ph or
208V 3 ph
• Time-delay Shutdown
• Certified to UL-1776
Standards
WHY IT’S NO. 1
their weaknesses. Among the
innovations, LANDA...
...Installed a slide-out service
platform for easy access
by technicians;
...Made the water tank of
rust-free polyethylene and
mounted it on the side for ease
of servicing and replacing;
...Moved the fuel tank below
to fix fuel line plugging;
...Installed “wheelbarrow”
handles and pneumatic tires
for easier maneuvering; and
...Designed the pop-out coil
so it could be removed in minutes,
instead of hours.
In short, a new pressure
washer was born that now sets
the standard for the industry.
®