Woodworking Brochure 9/10/08.indd - General Tools And Instruments

Doweling Made Simple
(Patent# 7,001,118)
E•Z as 1-2-3
NO. 841
Kit Includes
• 1 Doweling Jig
• 3 Brad Point Drill Bits:
1/4", 5/16", & 3/8"
• 3 Drill Stops: 1/4", 5/16"
3/8" & Hex Wrench
3 Types of Dowel Joints
• Edge to Edge
• Right Angle
• Edge to Surface
• 3 Steel Drill Bushings:
1/4", 5/16", 3/8"
• 6 Dowel Center Points:
2 each of 1/4", 5/16", 3/8"
• A Supply of Wood Dowels
3 Sizes of Dowel Joints
• 1/4", 5/16", 3/8"
3 Stock Sizes
• Ideal for 5/8", 3/4" & 1" Stock
NO. 8401
Accessory Kit for General’s
Pro Doweling Kit (No. 840)
and E•Z Dowel Kit (No. 841)
For 1/4", 5/16" and 3/8" Doweling Projects
Kit Includes
• 3 Brad Point Drill Bits:
1/4", 5/16", & 3/8"
• 3 Drill Stops: 1/4", 5/16"
3/8" & Hex Wrench
• 3 Steel Drill Bushings:
1/4", 5/16", 3/8"
• 6 Dowel Center Points:
2 each of 1/4", 5/16", 3/8"
• A Supply of Wood Dowels
Wood Joinery Made Simple
(Patent# 6,254,320)
Replacement Bit for General’s
E•Z Pocket Hole Jig Kit (No. 849)
3/8” High Speed Steel
Use For
• Creating Pocket Hole Joints
• Counter Boring
Kit Includes
• 1 Pocket Hole Jig with Clamp
• 3/8" Step Drill Bit & Drill Stop
with Hex Wrench
• 3 Drill Stops: 1/4", 5/16"
3/8" & Hex Wrench
• 6" Steel Square Drive Bit
• Square Drive Screws
• Free Project Plans Included
NO. 849
Smart Design
• Heavy duty aluminum extrusion
& hardened steel drill bushings
• Built to be portable or bench
mounted, and designed with a
clamping system built in
Three Types of
Pocket Hole Joints
• Flush
• Corner
• Angle
NO. 32
It’s Your Job . . .
General Tools Make it Easier

The E•Z Jointer Clamp Kit has been improved with the addition of an extendable
swing-arm that supports extra-wide boards during table saw ripping operations.
Cut Plastic Laminates Faster, Truer, Smoother
A Laminate Cutting
Guide for Your Table Saw
• Works with any table saw
*
Table saw blade shown without guard
for demonstration purposes only.
Always wear OSHA/ANSI approved
eye protection when using tools.
Holds Stock in the
Proper Position
NO. 848
• Holds Stock up to prevent
jamming under the rip fence
• Holds Stock down to prevent
stock from rising off the blade
General Tools & Instruments
80 White Street, New York, NY 10013-3567
TEL: 212. 431. 6100 TOLL FREE: 800. 697. 8665
sales@generaltools.com www.generaltools.com
© 2008 GENERAL TOOLS & INSTRUMENTS Printed in USA 9/08-5M
The Alternative To
Expensive Jointers
Straight Line Rip Crooked
Boards . . . On Your Table Saw!
• Rip crooked boards straight
in two easy passes
• No expensive jointers needed
• Works on any table saw with a rip fence
• Great for use with long stock
NO. 846
(Patent# 7,000,519)
For the Do-It-Yourselfer and the Professional
www.generaltools.com/EZ
EZ07