2010 ECO-i Tech Tips - Panasonic

ePAPER READ

DOWNLOAD ePAPER

shop.panasonic.com

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

START NOW

Possible Causes:<br />

The Dip switches for the number of indoor units is set incorrectly<br />

One or more of the indoor units is not powered on.<br />

The U1 & U2 communication is: broken, wired incorrectly, loose terminal connection at one or more of the<br />

indoor units terminal block

Warranty Details for NN-S780BA - Panasonic

Limited Warranty (for U.S.A. and Puerto Rico only)

Warranty Details for VDR-M10 - Panasonic

CZ-CFUNC1U Communication Adaptor Installation ... - Panasonic

06/11/07 Procedure for correcting Error Code E01 ... - Panasonic

ASPEN PUMPS FOR MINISPLIT AIR CONDITIONERS ... - Panasonic

KE18NB4U submittal Ceiling Recessed Heat Pump .indd - Panasonic

Possible Causes: The Dip switches for the number of indoor units is set incorrectly One or more of the indoor units is not powered on. The U1 & U2 communication is: broken, wired incorrectly, loose terminal connection at one or more of the indoor units terminal block

Inter-Units Inter Units control wiring : Not polarity Do not connect such as star wiring. : Star wiring star Prohibited star

Page 1 and 2: ECOi Technical Tips
Page 3 and 4: U Series Increasing fan Speed If Ex
Page 6 and 7: A good communication line should re
Page 10 and 11: • Change in Shield grounding proc
Page 12 and 13: • Heat Sink Paste When replacing
Page 14 and 15: L2 LM LA H1 H2 LB m1 LC m2 m3 m4 It
Page 16 and 17: Evacuation and Charging Procedures
Page 19 and 20: Summary of Rotary Dials and Dip Swi
Page 21: Main things to remember Complete pi

2010 ECO-i Tech Tips - Panasonic

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?