Sym DD Servicemanual - Scootergrisen
Sym DD Servicemanual - Scootergrisen
Sym DD Servicemanual - Scootergrisen
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
1. GENERAL INFORMATION<br />
Torque values<br />
Standard Torque Values for Reference<br />
Type Torque value Type Torque value<br />
1-6<br />
5 mm Bolt, nut 0.45 - 0.6 kg-m 5 mm Bolt 0.35 - 0.5 kg-m<br />
6 mm Bolt, nut 0.8 - 1.2 kg-m 6 mm Bolt, SH nut 0.7 - 1.1 kg-m<br />
8 mm Bolt, nut 1.8 - 2.5 kg-m 6 mm Flange bolt, nut 1.0 - 1.4 kg-m<br />
10 mm Bolt, nut 3.0 - 4.0 kg-m 8 mm Flange bolt, nut 2.4 - 3.0 kg-m<br />
12 mm Bolt, nut 5.0 - 6.0 kg-m 10 mm Flange bolt, nut 3.5 - 4.5 kg-m<br />
The torque values listed in below table are for more important tighten torque values. Please see above<br />
standard values for not listed in the table.<br />
Engine<br />
Cylinder head bolt<br />
Item Q’ty<br />
This chapter Contents<br />
Thread Dia.<br />
(mm)<br />
Torque Value<br />
(Kgf-m)<br />
4 6 1.0<br />
Spark plug 1 14 1.4<br />
Flywheel nut 1 10 3.8<br />
Sliding driving disc nut 1 10 3.8<br />
Sliding driving disc nut 1 28 5.5<br />
Clutch outer cover nut 1 10 3.8<br />
Drain bolts 1 8 1.3<br />
Crankcase bolts 6 6 1.0<br />
Remarks<br />
When engine<br />
cooled
Change language