APRILIA SPORTCITY ONE 50/125 (4 stroke) - TECHNICAL ...

APRILIA SPORTCITY ONE 50 2 stroke - TECHNICAL SPECIFICATIONS
Engine Horizontal single-cylinder 2s
Engine capacity 50 cm 3 (49.38 cc)
Bore and Stroke 40 mm / 39.3 mm
Fuel Unleaded petrol
Compression ratio 10.1/10.5:1
Max. power 3.0 kW (4.08 hp) at 6,500 rpm
Max. Torque 4.40 Nm at 6,500 rpm
Fuel system 17.5 mm Dell’Orto carburettor
Starter Electric and kick start
Alternator 88 W
Ignition Electronic inductive ignition with variable advance
Lubrication Wet sump forced lubrication system with mechanical pump
Transmission Automatic CVT
Clutch Automatic centrifugal dry clutch
Primary drive V belt
Secondary drive Gears
Chassis High-strength steel single cradle
Front suspension Telescopic hydraulic fork, 85 mm wheel travel
Rear suspension
Brakes
Wheel rims
Tyre
Engine acts as a swingarm, one hydraulic shock absorber
with preload adjustment; 76 mm wheel travel (50 cc),
Front 220 mm disc brake with two-piston floating calliper
Rear 140 mm drum brake
Light alloy
Front 3.00 x 14”
Rear 3.50 x 14”
Tubeless
Front 120/70 14”
Rear 120/70 14”
Length 1,950 mm
Dimensions
Width 740 mm
Wheelbase distance 1,358 mm
Seat height 775 mm
Fuel tank capacity 7 litres (1.5 litre reserve)
Helmet compartment Holds a flip up helmet
Emissions Euro 2
Accessories
32-lt New Concept top box with embossed finish, large full
windshield, sport full windshield, backrest (compatible with
New Concept 32-lt top box), electronic alarm system