Tech Bulletin December 2008 In this bulletin... - Armour Home ...
Tech Bulletin December 2008 In this bulletin... - Armour Home ...
Tech Bulletin December 2008 In this bulletin... - Armour Home ...
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>In</strong> <strong>this</strong> <strong>bulletin</strong>...<br />
<strong>Tech</strong> <strong>Bulletin</strong> <strong>December</strong> <strong>2008</strong><br />
SystemNet integration<br />
programme continues, network<br />
extra storage with MusicServer<br />
& S6, Nevo Studio Pro 2.0<br />
Release Candidate, NAD 1080p<br />
upgrade and iPod charging<br />
update<br />
SystemNet v10.0 beta<br />
We are pleased to announce futher developments in our SystemNet integration<br />
programme with the beta release of SystemNet v10.0 - providing even further<br />
integration and control possibilities - all delivered through the TouchScreen. v10.0<br />
provides full two-way RS-232 control of Dynalite lighting and heating and plus<br />
one-way RS-232 control of Clipsal lighting. Obviously <strong>this</strong> is in addition to the<br />
existing supported lighting systems - Lutron <strong>Home</strong>works, Lutron Grafik-eye and<br />
KNX heating and lighting. Allowing greater choice and flexibility when specifying<br />
lighting and heating control systems based on your clients' requirements.<br />
Needless to say, the improved integration options work seamlessly with the<br />
TouchScreen and we've retained the familiar page layouts and graphics, so no<br />
matter what system you choose to work with you can be assured of a tried and<br />
tested graphical user interface.<br />
Download the new software at<br />
http://www.armourhe.co.uk/downloads/-software/systemnet_files as well as<br />
support files for all our supported systems, including the newly added Dynalite and<br />
Clipsal.<br />
Important<br />
As usual please consider <strong>this</strong> a beta release and <strong>Armour</strong> <strong>Home</strong> cannot be held<br />
responsible for project delays and complications that result should <strong>this</strong> software be<br />
used in a consumer's premises. Please thoroughly check for issues prior to<br />
installation.<br />
Systemline S6 and MusicServer<br />
The MusicServer boasts a feature<br />
allowing consumers access to music<br />
stored on other hard drives on the<br />
same network as the server. This is<br />
commonly used where two S6<br />
controllers are used in the same project<br />
with more than eight zones, allowing<br />
the consumer the same access music<br />
content regardless of which S6 zone<br />
they are in.<br />
Please use the links below to download PDFs of the application notes and visit the FAQ web page.<br />
1 – Q12210/AN: Adding a location. This covers the addition of a remote hard drive to the MusicServer on the<br />
same network. It deals with both Windows and Mac operating systems.<br />
http://www.armourhe.co.uk/downloads/systemline/technical/Q12210-AN-003-Adding-a-Location.pdf<br />
2 – Q12225/AN: From PC to Server. This covers the copying of audio content from a networked PC to the hard<br />
drive of the MusicServer for permanent location on the internal hard drive.<br />
about:blank<br />
of 5 24/03/2009 10:02
http://www.armourhe.co.uk/downloads/systemline/technical/Q12225-AN_Sending_Music_From_PC_To_Server.pdf<br />
3 – Q12475/AN: FAQs. The <strong>Tech</strong>nical Support team are often asked common questions regarding various facets<br />
of the Systemline product. We have compiled an FAQ section on the website which you can refer to to see if your<br />
question can be easily answered - plus, as it's online you can quickly access <strong>this</strong> at anytime.<br />
http://www.armourhe.co.uk/faqs<br />
These are also downloadable from the <strong>Armour</strong> <strong>Home</strong> website at the above URLs along with more application notes<br />
relating to networking benefits of the server.<br />
Systemline Modular – New components<br />
Systemline ALM3 Speakers<br />
The new Systemline ALM3 speaker has<br />
recently been introduced to replace the ALM2.<br />
The new speaker model has the following<br />
improvements:<br />
• Part L compliance<br />
• Acoustic improvement with new drive unit<br />
designs and circuitry<br />
• Switchable IR on/off to avoid the purchase of<br />
two model numbers<br />
• Direct upgrades via QRC file including<br />
bass/treble adjustment<br />
<strong>In</strong>stallation methods remain the same, as do the<br />
punch down terminations.<br />
To enable simple and efficient configuration of the SLM speaker we recommend all<br />
installers carry an LRN7 remote that's loaded with an installer .qrc file. This file can<br />
be deleted from the remote using the ARC7 editor. The SLM speakers can still be<br />
configured using the conventional method which involves removing R36 in<br />
expansion speakers and the use of address 2 in sub-zones. These procedures<br />
can be used in single source installs where the LRN7 is not part of the Single<br />
Source Starter Pack.<br />
PIM-4<br />
The new external power input module allows up<br />
to four pairs of speakers to be powered by one<br />
PSM130, reducing the need for additional<br />
power supplies. The power input connection is<br />
direct from the transformer, with RJ45 connect<br />
to the speakers.<br />
Specifications:<br />
• 1 x Power input (RJ45 socket)<br />
• 4 x Power output (RJ45 socket)<br />
• Dimensions (WxDxH): 102 x 48 x 81.5mm<br />
• Requires PSM130 power supply active to<br />
drive<br />
Product Code: M-PIM4<br />
CIM/2<br />
This unit is an external version of the CIM wallplate allows the external connection<br />
of a stereo source device to a redundant RJ45 socket that may currently be<br />
positioned for networking or telephony use. Connection of the source and IR<br />
control window emitter is as the current CIM with an RJ45 socket on the reverse.<br />
Importantly the new CIM/2 also has a volume limitation (>-6db) toggle. This allows<br />
the attenuation an overly loud source device to match the other source devices in<br />
the system. Good problem solver!<br />
about:blank<br />
of 5 24/03/2009 10:02
Specifications:<br />
• Stereo input (2 x phono)<br />
• 2 x IR emitter outputs (3.5mm jack)<br />
• 1 x Balanced line audio output (RJ45)<br />
• Dimensions (WxDxH): 102 x 48 x 87mm<br />
Product Code: M-CIM/PI2<br />
about:blank<br />
of 5 24/03/2009 10:02
Nevo Studio Pro 2.0 Release Candidate<br />
This latest release will include two-way Serial communication for select devices,<br />
including Sonance iPort, Lutron <strong>Home</strong>works and others using pre-configured<br />
interfaces.<br />
NSP2.0 also contains improvements on the current software version to assist<br />
installers to complete their job more efficiently such as more backgrounds and<br />
sample configurations.<br />
Please remember <strong>this</strong> is a candidate release and must be treated as such.<br />
Therefore we would strongly advise that it should be used with care. UEI have<br />
assured us that <strong>this</strong> is representative of the final release unless something<br />
negative in found in field tests, will not be held accountable if problems should<br />
arise from its use. We would also advise that if installing NSP 2.0 you do so in<br />
parallel with NSP 1.1 and <strong>this</strong> can be achieved by altering the destination of the<br />
program so something like C:\Program Files\NSP2.0 - <strong>this</strong> will allow you to run<br />
both version s concurrently.<br />
If you do intend to use NSP2.0 in an active environment please note that both<br />
Nevo remotes and connects will require updates from within the software and <strong>this</strong><br />
is non reversible.<br />
The software itself will be available to registered users of mynevo.com, but the size<br />
of the file precludes it from being sent via email so, please register as it will not be<br />
made available from <strong>Armour</strong> <strong>Tech</strong>nical Support.<br />
The software was made available on Monday 8th <strong>December</strong> from<br />
www.mynevo.com with the official release due in February 2009 during the<br />
<strong>In</strong>tegrated Systems Europe expo.<br />
NAD<br />
NAD has released further supporting documentation referring to RS-232 control of the its Txx5<br />
AV receiver range. This can be downloaded from http://nadelectronics.com/software or<br />
alternatively the <strong>Armour</strong> <strong>Home</strong> site in the software downloads section. These documents<br />
include RS-232 protocols descriptions for the NAD T785/T775/T765/T755/T175, and can be<br />
downloaded from<br />
http://www.armourhe.co.uk/downloads/-software/NAD/NAD_T7X5_RS232_Protocol_Docs.zip.<br />
NAD has also released the software upgrading the NAD T585 and Masters M55 to become<br />
full 1080p compatible. This software is free of charge and can be downloaded from<br />
http://www.armourhe.co.uk/downloads/-software/NAD/M55_v2.72S.zip - documentation can<br />
be downloaded from<br />
http://www.armourhe.co.uk/downloads/-software/NAD/M55-S<strong>2008</strong>-01.doc<br />
iPod Charging update<br />
about:blank<br />
of 5 24/03/2009 10:02
<strong>In</strong> the previous technical <strong>bulletin</strong> we highlighted that the latest generation of iPods<br />
had changed the charging methods from Firewire to USB - causing some issues<br />
with all docks on the market. We also promised an update so here it is...<br />
Both the Roth ALFiE and MC-4 products do not currently conform to the new iPhone<br />
3G specification - they will play but won't charge. The second generation ALFiE and<br />
MC-4 products will conform to <strong>this</strong> standard and are expected during 2009. Roth is<br />
pleased to inform us the RothDock, due in stock early 2009, will be fully iPhone 3G<br />
compliant and therefore charge and play all iPods.<br />
iPort is releasing an update board for their IW (<strong>In</strong>-Wall) range which we are<br />
expecting delivery of in early 2009. This will be an optional and chargeable upgrade.<br />
The iPort FS (Free-Standing) range is being upgraded in early 2009. T his product<br />
range will then also conform to iPhone 3G charging specification.<br />
Tivoli Audio products do not currently conform to the iPhone 3G specification - they<br />
will play but won't charge. Tivoli Audio will be making changes to its product and we<br />
hope to see <strong>this</strong> stock in late 2009.<br />
More news as we get it…<br />
about:blank<br />
of 5 24/03/2009 10:02
Change language