Semiconductors, Passives & Optoelectronics - Farnell

Target 3001!
Board layout software for Windows
TARGET 3001! represents a new
generation of CAD/CAE software for
circuit design. TARGET 3001! has been
created to meet the requirements of
professional design engineers. TARGET
3001! incorporates the functions of
schematic capture, simulation, PCB
layout, autoplacer, autorouter and EMC
analysis all through one Windows user
interface. In addition the integration of the
entire project data in one common
database accelerates the development
process enormously. Easy generation of
all required manufacturing data
minimises your projects time-to-market.
TARGET 3001! includes:
* Schematic
* Mixed Mode Simulation
* Shape Based Contour Autorouter
* PCB Layout
* AutoPlacer
* EMC Analysis
* Frontpanel engraving tool
Light version: max. 400 pins/pads, max. 2 layers, simulation: max 30 signals
Smart version: max 700 pins/pads, max. 2 layers, simulation: max 50 signals
Economy version: max 1,000 pins/pads, max 4 layers, simulation: max 75 signals
Professional version: Pins/Pads unlimited, max 100 layers, simulation: max 100
signals
Design Station version: Unlimited number of Pins/Pads and signals for simulation,
max 100 layers.
• Circuit diagram and board software especially for developers
• Circuit diagram, mixed-mode simulation, layout with auto-placer, auto-router,
EMC analysis and front panel tool in one program
• All the functions are based on a project file
• Vector graphics with a resolution of 1 nm
• 50 step return/repeat (Undo/Redo)
• Transfer of projects from Protel* and Eagle*, reading-in of network lists in
OrCAD* Multiwire and Mentor* format, TARGET ASCII and Gerber* format
• Reading-in of Bitmaps (company logos etc.)
• Administration of layout variants
• Multilayer with blind and buried Vias
• BGAs and COB technology is supported
• Starr-Flex designs possible
• Isolation milling
• Output to all Windows printers in Gerber*, XGerber*, Excellon*, S&M, DXF,
PostScript* and TARGET-ASCII (*Protel, Eagle, OrCAD, Gerber, Excellon and
PostScript are registered trademarks belonging to their respective owners)
• New hybrid auto router
• Setting a panel
• Generate test points
• Solder stop/solder paste can be set individually per pad/DuKo
• Selection assistant (selection of elements with definite properties)
• Eagle export
• List of the last 20 components used
• Revised component and model libraries
• On-line DRC (Design Rule Check)
• Export format *.idf for transfer into 3D-CAD design programs Front panel
designer
System requirements:
• Operating system Windows 98/ME/NT4/2000/XP/VISTA
• Processor AMD Athlon or Intel Pentium III
• Main memory 64 MB
• Graphics At least 1024 x 768 points and 256 colours
• CD-ROM drive
• Internet access Required for certain functions: Program updates, library
updates, on-line library, datasheets, further supplier information etc.
Mftrs. List No. Order Code Price Each
Light version F13_LIG 142-5147 72.91
Smart version F13_SMA 142-5148 168.32
Economy version F13_ECO 142-5149 602.41
Professional version F13_PRO 142-5150 1,746.07
Design Station version F13_DS 142-5151 3,175.35
Ferric Chloride Pellets,
Liquid, Developer and
Stain Remover
Hexahydrous pellets sufficient to make 1 litre
(0.5kg) or 5 litres (2.5kg)
Super activated liquid available in 5 litre
containers
1 litre concentrated developer makes 5 litres
• Ferric Chloride available as hexahydrous pellets, Liquid or Super Activated
Liquid which includes a hydrochloric acid additive to speed up the etching time
• Fine etch crystals for cleaner etching
• For etching copper clad printed circuit boards
• 36°C, 41°C and Long Life Liquid in 2.5 Litres
• Ferric chloride stain remover
• Use as a scrubbing compound or cleaning solution
• Developer concentrate makes 5 litres
Order Code Price Each
Ferric Chloride
Pellets 0.5kg (makes 1l) 141-311 8.04
Pellets 2.5kg (makes 5l)
Super Activated
149-080 25.37
Liquid (5l)
PCB Processing Chemicals
Fine Etch Crystals
413-8697 22.59
powder makes 5l 320-5022 43.92
Developer 1l makes 5l
Stain Remover
320-4996 26.86
1.0kg 769-897 25.35
Spray Etch/Developer
’Rota-Spray’
The Processing Tank is designed to take multiple small
boards or one panel up to a maximum of 10" x 12". It
has a transparent case so that the panels can be
examined after processing without removal. The lid is
fitted with a safety cut-out to stop the motor if the lid is
raised during etching. The optional Base Unit places the
top of the Processing Tank at an efficient working
height of 110cm.
• Etches PCB’s in less than
90 seconds
• 10" x 12" (254 x 305mm)
board capacity
• Digital temperature control
• Digital timer control
• Integral Spray Wash tank
• Splash Hopper included
• 5 litre reservoir with low
level sensor
• Bottom drain - no
syphoning
• Optional Base Unit
Processing Tank shown
with optional Base Unit
SMD Adapter - MSOP
• FR4 EPOXY fibre-glass 1.50 mm double-sided 35 μm
CU (pth)
• Solder and component side with chem. NI/AU surface
and solder stop mask
• hole dia 1.00 mm
Mftrs. List No. Connector Type Order Code Price Each
RE903 MSOP-8 128-7740● 6.94
RE904 MSOP-10 128-7741● 6.94
Description Order Code Price Each
Processing Tank 120-1824 H ● 1,267.70
Base Unit 440-2455 111.69
H Heavy item (≈29kg), special delivery conditions apply
• adapter for 1 x
MSOP-8 or 1 x
MSOP-10
RoHS Compliant
Non-compliant Over 400,000 products available online at www.farnell.com
Test & Power
Prototyping 49