Catalog ST 80 / ST PC · 2011 - Siemens

2
Operator panels
System interfaces with WinCC flexible
SIMATIC 505
■ Overview
A variety of interfaces differing in respect of type and performance
are available for linking SIMATIC HMI Panels to
SIMATIC 505. However, a feature common to all is that from the
point of view of the connected SIMATIC HMI Panel, the
connection is always a logical point-to-point one, that is, there is
always a fixed assignment between an HMI Panel and a PLC.
NITP interface (not for OP 77A, TP 177A, Basic Panel,
Mobile Panel 177 PN, Mobile Panel 277 IWLAN)
The NITP interface runs via the PG interface of the SIMATIC 505
and uses the associated CPU resources, that is, the performance
capability of the SIMATIC HMI Panel is determined by the
performance capability of the SIMATIC CPU used.
Controller SIMATIC HMI
Target hardware
(PROTOCOL)
(physics)
SIMATIC 505 (NITP)
PLC 525, 535, 565T
(RS 232)
PLC 545, 555
(RS 232)
PLC 535, 545/CPU 1101,
565T (RS 422)
System interface possible
– System interface not possible
1) Not Mobile Panel 177 PN, Mobile Panel 277 IWLAN;
Mobile Panel 177 DP, Mobile Panel 277 connection via special
connecting cable and terminal box (see Mobile Panel); see manual for
cable assignment.
2) The RS 422/RS 232 adapter 6AV6 671-8XE00-0AX0 is required for
Touch Panels, Operator Panels, and Multi Panels
3) A standard adapter (9-/25-pin male) is required on the PLC
4) A commercially available level converter (RS 232/RS 422) is required
on the PC
5) Connection via integrated MPI/PROFIBUS interface, use the
CP 5611 A2 with a standard PC
6) Detailed information (cable assignment) can be found in the online
help for WinCC flexible and in the Communication User Manual for
Windows-based systems
7) Bus connector 6GK1 500-0EA02
2/184
OP 77A
TP 177A
Basic Panels
Siemens ST 80 / ST PC · 2011
OP 77B
TP 177B DP
OP 177B DP
TP 177B DP/PN
OP 177B DP/PN
Mobile Panel 177 DP
Mobile Panel 177 PN
© Siemens AG 2011
PROFIBUS DP interface (not for OP 77A, TP 177A, Basic
Panel, Mobile Panel 177 PN, Mobile Panel 277 IWLAN)
SIMATIC 505 PLC or SIMATIC 545, SIMATIC 555 with CP 5434
With the PROFIBUS DP interface, up to 30 SIMATIC HMI Panels
can be connected as SLAVES to one SIMATIC 545, 555 via a
PROFIBUS network, with plug-in PROFIBUS DP/master interface
type CP 5434.
Communication between SIMATIC HMI Panels (DP slaves) and
SIMATIC 505 (DP master) runs via PROFIBUS DP message
frames in accordance with EN 50170 with higher-level
"HMI profile". An application ladder which must be called for
each connected SIMATIC HMI Panel is required in the PLC
(example of application ladder included in ProTool scope of
delivery).
TP 277
OP 277
Mobile Panel 277
Mobile Panel 277 IWLAN
MP 177
MP 277
MP 377
WinCC flexible
Runtime
Connection via
– • 1) 2) • 1) 2) • PPX: 2601 094-8001 3)
See online help 6)
– • 1) 2) • 1) 2) • PPX: 2601 094-8001 3)
6XV1 440-2K…
(see HMI accessories/
connecting cables)
– • 1) • 1) • 4) See online help 6)
PLC 545/CPU 1102, 555
(RS 422)
– • 1) • 1) • 4) See online help 6)
SIMATIC 505 (PROFIBUS DP + HMI)
via PROFIBUS DP to
– •
1 x PLC 545, 555 with
CP 5434
1) • 1) • 5) PROFIBUS 7)
(see Catalog IK PI)