Catalog ST 80 / ST PC · 2011 - Siemens

2
Operator panels
System interfaces with WinCC (TIA Portal)
Third-party controllers
■ Overview (continued)
Controller SIMATIC HMI
Target hardware
(PROTOCOL) (physics)
Modicon (MODBUS TCP/IP)
Via MODBUS TCP/IP network
to max. 4 x controllers 2)
Concept Quantum,
Unity Quantum
Momentum
Premium (TSX57)
TSX Micro (TSX37)
Modicon M340 20x0
(except 2010)
Via TCP/IP Modbus Plus
Bridge 174 CEV 200 40 and
MODBUS PLUS network to
max. 4 x controllers 2)
Concept Quantum,
Unity Quantum
Momentum
Compact
Modicon (MODBUS RTU)
to max. 1 x controller
Concept Quantum
Momentum
Compact
(RS 232)
Via bridge BM85-000 or PLC
with bridge functionality and
MODBUS PLUS network to
max. 4 x controllers 2)
Concept Quantum
Compact (RS 232)
System interface possible
– System interface not possible
1) Mobile Panel connection via special connecting cable and terminal
box (see Mobile Panel), see Manual for cable layout.
2) The following listed controllers can be combined as required
3) Only Basic Panel PN, TP 177B DP/PN, OP 177B DP/PN,
Mobile Panel 177 PN
4) For Basic Panel, Touch Panel, Operator Panel, Comfort Panel,
Multi Panel, the RS 422/RS 232 adapter 6AV6 671-8XE00-0AX0 is
required
5) Not Basic Panel PN, Mobile Panel 177 PN
Note:
For detailed information on pin assignment, refer to Online Help
of WinCC; see also FAQs:
http://support.automation.siemens.com/WW/view/en/29034071
2/196
OP 77A
TP 177A
Siemens ST 80 / ST PC · 2011
– 3) 3)
– 3) 3)
© Siemens AG 2011
Basic Panel Comfort Panel OP 77B
TP 177B DP
OP 177B DP
TP 177B DP/PN
OP 177B DP/PN
Mobile Panel 177 DP 1)
Mobile Panel 177 PN 1)
4) 4) 5) 4) 4) 5) 4)
4) 4) 5) 4) 4) 5) 4)
TP 277
OP 277
Mobile Panel 277 1)
MP 177
MP 277
MP 377
WinCC Runtime
Advanced