Download Sharp Microwave Trim Kit - Sharp Australia Support

If service is required during the warranty period, please contact your nearest Sharp Approved Service Centre. 

These repairs would be carried out at no charge to the owner, subject to the conditions specified herein. 

The owner is responsible for any transportation and insurance costs if the product has to be returned for 

repair. 

WARRANTY WARRANTY 

SHARP SHARP 

SHARP MICROWAVE MICROWAVE 

MICROWAVE TRIM KIT TRIM KIT 

TRIM KIT 

MODEL NO. RKJ39S 



PART IDENTIFICATION SHEET 



This warranty does not extend to accessories or defects or injuries caused by or resulting from causes not 

attributable to faulty parts or the manufacture of the product, including but not limited to, defect or injury 

WARRANTY 

caused by or resulting from misuse, abuse, neglect, accidental damage, improper voltage, liquid spillage, 

Consumer vermin Electronic infestation, software, Products or any alterations made to the product which are not authorised by Sharp. 

Consumer Electronic Products 

Consumer Electronic Products 

2 

2 

1 

Please retain your sales documentation, as this should be produced to validate a warranty claim. 

2 

Congratulations on Your Purchase! 

Congratulations on Your 

Congratulations This Purchase! 

warranty on is Your in addition Purchase! 

to and in no way limits, varies or excludes any express and implied rights and 

4 

remedies under any relevant legislation in the country of sale. 

This Sharp product is warranted against faults in materials and manufacture for a period of twelve (12) months 

his Sharp product 

This from 

is warranted 

Sharp the date 

against 

product of original 

faults 

is warranted purchase. 

in materials and manufacture for a period of twelve (12) months 

1. FASCIA ASSEMBLY 

om the date of original purchase. 

against faults in materials and manufacture for a period of twelve (12) months 

from the date of original purchase. 

2. MOUNTING FRAME ASSEMBLY 

If service is required during the warranty period, please contact your nearest Sharp Approved Service Cen- 

service is required 

tre. 

during 

If service These 

the 

is repairs 

warranty 

required would 

period, 

during be the carried 

please 

warranty out 

contact 

at period, no charge 

your nearest 

please to the 

Sharp 

contact owner, 

Approved 

your subject nearest to 

Service 

the Sharp conditions 

Cen- 

3. BASE ASSEMBLY 

Approved specified Service herein. 

e. These repairs would be carried out at no charge to the owner, subject to the conditions specified herein. 

Cen- 

IMPORTANT 

4. 6 off 6 GUAGE SCREWS 

tre. These repairs would be carried out at no charge to the owner, subject to the conditions specified herein. 

The owner is responsible for any transportation and insurance costs if DO the NOT product RETURN has to be THIS returned DOCUMENT for TO SHARP 

he owner is responsible 

The repair. 

for any transportation and insurance costs if the product has to be returned for 

pair. 

owner is responsible for any transportation and insurance costs if the product has to be returned for 

repair. 

This warranty does not extend to accessories For or your defects reference, or injuries please caused enter by the or resulting particulars from of causes your purchase not below and retain, with your purchase 

CAUTION 

his warranty does 

This attributable 

not extend 

warranty to 

to 

does faulty 

accessories 

not parts extend or 

or 

the 

defects 

to accessories manufacture 

or injuries documentation. 

or of 

caused 

defects the product, 

by or resulting 

or injuries including 

from 

caused but by not 

causes 

or limited 

not 

resulting to, from defect causes or injury 

ttributable to faulty 

not 

attributable caused 

parts or 

by 

the 

or to resulting 

manufacture 

faulty parts from 

of 

or misuse, 

the product, 

the manufacture abuse, 

including Model neglect, No. 

of the accidental 

but not limited 

product, including damage, 

to, defect 

but improper 

or injury 

not limited voltage, to, defect liquid spillage, 

1. Read and follow all of the instructions completely. 

aused by or resulting 

or injury 

caused vermin 

from 

infestation, 

misuse, abuse, 

by or resulting software, 

neglect, 

from misuse, or any 

accidental 

alterations Serial damage, 

abuse, neglect, made No. 

accidental to 

improper 

the product 

voltage, 

damage, which 

liquid 

improper are not 

spillage, 

authorised voltage, liquid by Sharp. 

2. The Sharp Built-in Trim Kit must be installed in accordance with the full set of inst 

ermin infestation, software, or any alterations made to the product 

spillage, 

Date which of Purchase are not authorised by Sharp. 

the regulations laid down by electrical authorities, building regulations and the requ 

vermin infestation, software, or any alterations made to the product which are not authorised by Sharp. 

1 

3 

Please retain your sales documentation, as Retailer this should be produced to validate a warranty claim. 

1 

government authorities. 3 

lease retain your sales documentation, as this should be produced to validate a warranty claim. 

1 

3 

Please retain your sales documentation, as this should be produced to validate a warranty claim. 

3. The microwave oven must be unplugged before installation of the Sharp Built-in K 

This warranty is in addition to and in no way limits, varies or excludes any express and implied rights and 

4 

4 

4. For safe use of the microwave oven, DO NOT modify or alter any part of this kit. 

his warranty is in 

remedies 

addition to 

This warranty under 

and in 

is any 

no 

in addition relevant 

way limits, 

to legislation 

varies or 

and in no in 

excludes 

way the limits, country 

any 

varies of 

express 

sale. 

and implied rights and 

or excludes any express and implied rights and 

4 

medies under any relevant legislation in the country of sale. FOR LOCATION ENQUIRIES WITHIN FOR PRODUCTS PURCHASED IN 

5. The kitchen cabinetry that houses the microwave oven must be constructed to allow 

remedies under any relevant legislation in the country of sale. 

1. FASCIA ASSEMBLY operate to Australian Standards 3350.1-2002, 60335.1, 3350.2.25-2001 and 60335.2 

AUSTRALIA 

NEW ZEALAND 1. FASCIA ASSEMBLY 

“The RKJ39S is 2. 1. is designed MOUNTING FASCIA designed for for ASSEMBLY 

the the FRAME R3395YW R395YS ASSEMBLY 

and R395NS. Should you wish to use it it for 

REGARDING YOUR 

2. MOUNTING FRAME ASSEMBLY 

the R395FS 3. 2. please BASE MOUNTING contact ASSEMBLY Sharp FRAME Customer ASSEMBLY Care Australia CARE on 1300 AND 135 022 CLEANING 

LOCAL 

CONTACT YOUR SELLING DEALER/RETAILER the R395FS please contact Sharp Customer Care Australia on 1300 135 022 

3. BASE ASSEMBLY 

IMPORTANT 

OR CALL 

(for Sharp Customer 3. 4. BASE 6 offCare 6 ASSEMBLY 

GUAGE New Zealand SCREWS contact 09 920 4147) for an alternate base” 

IMPORTANT 

SHARP APPROVED SERVICE CENTRE 

(for Sharp Customer Care New Zealand contact 09 920 4147 for an alternate base).” 

4. 6 off 6 GUAGE SCREWS Use a mild stainless steel cleaner applied with a soft damp cloth. Wipe in the stainless 

IMPORTANT 

SHARP CUSTOMER SERVICES 

DO NOT RETURN THIS DOCUMENT CALL TO THE SHARP 

4. 6 off 6 GUAGE SCREWS 

NOT USE CAUSTIC CLEANERS, ABRASIVE OR HARSH CLEANERS OR SCOU 

DO NOT RETURN THIS DOCUMENT TO SHARP 

DO NOT RETURN SHARP THIS DOCUMENT SERVICE TO REFERRAL SHARP CENTRE TELEPHONE: 09 573 0111 

For your reference, please enter the particulars of your purchase below and retain, with your purchase 

CAUTION 

or your reference, 

For documentation. 

please enter the particulars of your purchase below LOCAL and retain, CALL with 1 your 300 purchase 135 022 

FACSIMILE: 09 573 0113 

CAUTION 

TRIM KIT SPECIFICATIONS 

your reference, please enter the particulars of your purchase below and retain, with your purchase 

CAUTION 

ocumentation. 

documentation. 

Model No. 

or visit our website 

or contact our web site 1. Read and follow all of the instructions completely. 

odel No. 

Model Serial No. 

1. Read and follow 

No. 

1. 2. 

all 

Read The 

of the 

Sharp 

instructions 

and follow Built-in all Trim 

completely. 

of the Kit instructions must be installed 

Cavity 

completely. in accordance 

Dimensions 

with the full set of instructions listed and 

Overall 

meet 

Kit Dimensions; 

erial No. 

www.sharp.net.au 

www.sharp.net.nz 

Serial Date of No. Purchase 

2. The Sharp Built-in Trim 

2. The the regulations 

Kit must be 

Sharp Built-in laid 

installed 

Trim down Kit by 

in 

must electrical 

accordance 

be installed authorities, 

with Internal the full 

in accordance building 

Width set of 

regulations 

instructions 600mm 

with the full and 

listed 

set the 

and 

of requirements 

meet 

instructions listed of state 

Width 

and and meet local 

596mm 

ate of Purchase 

Date Retailer 

the regulations laid 

of Purchase 

the government 

down by electrical 

regulations authorities. 

authorities, building regulations and the requirements of state and local 

SHARP CORPORATION OF AUSTRALIA PTY. LIMITED 

SHARP CORPORATION OF NEW ZEALAND LIMITED 

External Front Height 381mm Height 380mm 

etailer 

laid down by electrical authorities, building regulations and the requirements of state and local 

ABN 40 003 039 405 

59 Hugo Johnston government Drive authorities. 

Retailer 

3. The government microwave authorities. oven must be unplugged before 

Depth 

installation of the Sharp 

500mm 

Built-in 

(minimum) 

Kit. 

Depth 22mm (Fascia 

1 Huntingwood Drive Blacktown NSW 2148 

Penrose, Auckland 3. The microwave oven 

3. 4. The For 

must 

safe 

be 

microwave use 

unplugged 

of the oven microwave 

before installation 

must be unplugged oven, DO 

of 

NOT 

the 

before modify 

Sharp Built-in 

installation or alter 


of any the Sharp part of Built-in this kit. 

4. For safe use of the 


FOR LOCATION ENQUIRIES WITHIN FOR PRODUCTS PURCHASED IN 

4. 5. 

microwave 

For The safe kitchen 

oven, 

use cabinetry 

DO NOT 

of the microwave that houses 

modify 

oven, the 

or 

DO microwave 

alter Cabinetry any part 

NOT modify oven 

of Ventilation this 

or must 

kit. 

alter be any constructed part of this to kit. allow the microwave oven to 

FOR LOCATION ENQUIRIES WITHIN FOR IMPORTANT PRODUCTS NOTICE: PURCHASED This warranty IN applies only to products sold in Australia 5. The & New kitchen Zealand. cabinetry 

FOR LOCATION ENQUIRIES WITHIN FOR PRODUCTS PURCHASED IN 

5. The operate 

that houses 

kitchen to Australian 

the microwave 

cabinetry Standards 

oven 

that houses 3350.1-2002, 

must be An constructed 

the microwave 60335.1, 

opening on 

oven must 3350.2.25-2001 

to the allow upper the cavity microwave 

be constructed and 

panel 

to 60335.2.25. 

oven must to be cut for air circulation. This opening sho 

allow the microwave oven to 

AUSTRALIA 

NEW ZEALAND 

operate to Australian Standards 3350.1-2002, 60335.1, 3350.2.25-2001 rear– minimum and 60335.2.25. 600mm x 100mm. 

AUSTRALIA 

operate to Australian Standards 3350.1-2002, 60335.1, 3350.2.25-2001 and 60335.2.25. 

REGARDING AUSTRALIA YOUR NEW ZEALAND 

REGARDING YOUR 

CONTACT NEW YOUR SELLING ZEALAND DEALER/RETAILER 

CARE AND CLEANING 

REGARDING LOCAL YOUR 


LOCAL 

CONTACT YOUR SELLING DEALER/RETAILER 

CONTACT YOUR SELLING DEALER/RETAILER 


LOCAL 

CONTACT YOUR OR SELLING CALLDEALER/RETAILER 

SHARP APPROVED SERVICE CENTRE OR CALL 


OR CALL 

Use a mild stainless steel cleaner applied with a soft damp cloth. Wipe in the stainless steel grain direction. DO 



CALL THE 

Use a mild stainless 

Use NOT 

steel 

a USE 

cleaner 

mild CAUSTIC 

applied with 

stainless steel CLEANERS, 

a soft damp 

cleaner applied ABRASIVE 

cloth. Wipe 

with a soft OR 

in 

damp HARSH 

the stainless 

cloth. CLEANERS 

steel grain 

Wipe in the OR 

direction. 

stainless SCOURING 

DO 


steel grain PADS. 

CALL THE 

direction. DO 


NOT USE CAUSTIC CLEANERS, ABRASIVE OR HARSH CLEANERS OR SCOURING PADS. 

SHARP SERVICE CALL REFERRAL THE CENTRE TELEPHONE: 09 573 0111 

NOT USE CAUSTIC CLEANERS, ABRASIVE OR HARSH CLEANERS OR SCOURING PADS. 

SHARP SERVICE REFERRAL CENTRE TELEPHONE: 09 573 0111 

SHARP SERVICE REFERRAL CENTRE TELEPHONE: 

FACSIMILE: 09 09 573 573 0113 0111 

LOCAL CALL 1 300 135 022 


LOCAL CALL 1 300 135 022 

FACSIMILE: 09 573 0113 


LOCAL or visit CALL our 1 website 300 135 022 

FACSIMILE: or contact our 09 web 573 site 0113 



or contact our web site 


or contact our web site 

Cavity Dimensions Overall Kit Dimensions; 



Cavity Dimensions 

Cavity Internal Dimensions Width 600mm 

Overall Kit Dimensions; 



Overall Width Kit Dimensions; 596mm 



Internal Width 



External 

600mm 

Internal Width Front Height 381mm 

Width 596mm 

600mm Height Width 596mm 380mm 

SHARP CORPORATION OF AUSTRALIA PTY. External Front Height 

ABN LIMITED 40 003 039 405 SHARP CORPORATION OF NEW ZEALAND 59 Hugo LIMITED Johnston Drive 



External Depth 

381mm 

Front Height 381mm 500mm (minimum) 

Height 380mm 

Depth Height 22mm 380mm 380mm(Fascia) 

ABN 40 003 1 039 Huntingwood 405 Drive Blacktown NSW 2148 59 Hugo Johnston Drive Penrose, Auckland 

Depth 500mm (minimum) Depth 22mm (Fascia) 

1 Huntingwood Drive Blacktown NSW ABN 2148 40 003 039 405 

Penrose, Auckland 59 Hugo Johnston Drive 

Depth 500mm (minimum) Depth 22mm (Fascia) 

1 Huntingwood Drive Blacktown NSW 2148 

Penrose, Auckland 

Cabinetry Ventilation 

Cabinetry Ventilation 

IMPORTANT NOTICE: This warranty applies only to products sold in Australia & New Zealand. 

Cabinetry An opening Ventilation on the upper cavity panel must be cut for air circulation. This opening should be placed at the 

MPORTANT NOTICE: This warranty applies only to products sold in Australia & New Zealand. 

An opening on the upper 

IMPORTANT NOTICE: This warranty applies only to products sold in Australia & New Zealand. 

An rear– opening minimum 

cavity panel 

on the 600mm 

must 

upper x 

be 

cavity 100mm. 

cut for air circulation. This opening should be placed at the 

rear– minimum 600mm x 100mm. 

panel must be cut for air circulation. This opening should be placed at the 

rear– minimum 600mm x 100mm.

Sharp Microwave Oven & Built in Trim Kit 

Installation Procedure 

1. Before placing microwave 

into cavity, sit the microwave 

oven onto the base panel. Ensure 

the microwave oven feet locate 

within panel feet holes. 

3. Fit the mounting frame into 

place and secure into kitchen 

cavity using the four screws 

provided. There are four screw 

holes in each corner of the frame, 

located next to the clips. 

5. Remove plastic protective 

coating from Stainless Steel fascia. 

Align and sit the stainless steel 

fascia onto the bottom left and 

right mounting frame clip, one at 

a time. 

2. Plug the microwave oven into 

an approved 240 volt, 10 amp 

powerpoint. DO NOT turn on 

until after installation complete. 

Carefully insert the microwave 

oven and base panel into the 

kitchen cavity. 

4. Move the microwave oven and 

base panel until the securing 

holes align with the mounting 

frame. Use the two screws 

provided. Check that the 

microwave feet are located 

within the base panel feet holes. 

6. Apply pressure to the top right 

and left corner of the stainless 

steel fascia until it clips into 

place securely. Clean with a mild 

stainless steel cleaner. (See 

cleaning tips). 

SHARP MICROWAVE TRIM KIT 

A 

A 


CABINET SPECIFICATIONS 

FRONT VIEW 

600 MIN 

600 

SHARP 

MICROWAVE 

MODEL RKJ39S 

SECTION VIEW 

2 

Allow 2mm gap between 

cabinet door and trim 

C 

TRIM KIT BASE 

16 

100 

VENT 

VENT 

CABINET 

100 

MICROWAVE 

CAVITY 

600 

SECTION A-A 

DETAIL C 

FIX IN PLACE WOOD 

BATTEN 20 X 40 X 365 

BOTH SIDES 

22 

2 

366 2 

22 

TRIM KIT FASCIA 

TRIM KIT 

MOUNTING 

FRAME

Download Sharp Microwave Trim Kit - Sharp Australia Support

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?