Standard Series Technical Catalogue, No other range is - Clipsal

UNDERVOLTAGE RELAYS & KEY TAG TYPE SWITCHES
24
UNDERVOLTAGE RELAYS & KEY TAG TYPE SWITCHES
Under Voltage Relays
Specifi cally designed to reduce overloads to airconditioners and other sensitive equipment during under voltage
(brown-out) situations, the relay switching to open circuit. Excessive loads caused by high in-rush currents when
supply is restored are prevented by the manual reset operation requirement, allowing time to full load restoration.
Under Voltage Relays are designed to drop power to the outlet when an under voltage supply condition (or a ‘brownout’)
occurs.
UNDER VOLTAGE RELAYS
Cat. No. Length Width Depth Mounting Centres
All products 115mm 73mm 11mm 84mm apart
15X15RZ A Single Power Outlet, 250V/15A (with no volt relay and reset switch).
15XRZ B Single Power Outlet, 250V/10A (with no volt relay and reset switch).
32VRZ C No Volt Relay and Reset Switch, 250V/10A, (standard size).
32VRZ15 C No Volt Relay and Reset Switch, 250V/15A, (standard size).
Key Tag type switches and Key Operated Switches
Clipsal’s Standard Range Key Tag Switches and Room
Access Card Operated Switches are the ideal form
of energy management for hotels, motels and other
locations where power can be left on unnecessarily.
Inserting the key Tag or card into the switch activates
selected circuits to operate lighting, air-conditioning,
television, radio and other appliances. Circuits
to refrigerators and other equipment that need to
continually run are not connected to the switches.
Removing the key Tag or card automatically cuts off
power to all of the circuits to signifi cantly reduce
power wastage.
Refer to adjacent page for detailed information on
this range.
B
A
C
15XRZ
32VRZ