New Product Bulletin - October 2009 (Issue 2), 19741 - Clipsal

NEW 

LIGHTING 

Long term, low cost 

lighting solutions 

Look inside for what's new in Saturn 250V 

CEILING 

SWEEP FANS 

Now with the convenience 

of remote control – 

Massive 10m range! 

C-BUS 30 SERIES 

MECHANISM 

Fit C-Bus to any Clipsal 

switchplate! 

EPIC 

ORGANISER 

56 SERIES COVERS 

A single, simple connection 

panel for everything digital Innovators not imitators 

ISSUE 2 2009 

Released October 2009

Providing new opportunities to upsell 

Hello and welcome to the 2009 edition of the Clipsal 

New Product Bulletin. 

We are proud to bring you some important new additions to 

our existing product ranges, designed to provide you with 

opportunities to add value to your customer offering. 

A major highlight includes significant new additions to 

our Clipsal Saturn 250V range of accessories. We now 

offer you this very popular range in a new Pure White 

colour representing a great upselling opportunity for every 

contractor. We’ve also added new Saturn dimmers, fan 

controllers and intermediate switches as well. 

Another great upseller, our 30PB Impress switch 

mechanism is now available over the counter in Slimline, 

Eclipse and C2000 ranges. An intermediate version of this 

ingenious push-button switch is now available. The 30PB 

really is a great product offering with so many advantages 

over the traditional rocker switch mechanism. 

In C-Bus, we’ve now designed a 30 Series C-Bus 

mechanism which means you can have C-Bus in almost 

every Clipsal wallplate configuration you choose including 

architrave switches. Not only does this make C-Bus 

more flexible during installation but also a more affordable 

proposition for your home automation customers. 

With the rapid take-up of digital technology in this 

country, Epic Organiser is a great new connection panel, 

designed to accommodate and simplify everyone’s 

digital communications needs, particularly in the 

accommodation industry. Please have a close look at the 

new data connection accessories we are offering so you 

can capitalise on the take up of high definition TV and 

broadband internet access in the home. 

2 

Our lighting range of products is growing stronger and 

stronger. The products represented in this New Product 

Bulletin are just a small sample of what’s on offer. All 

products in our lighting range have been carefully selected, 

offering you excellent quality and reliability. Please refer to 

our lighting catalogue to see the entire range. 

There are many more important new products for you 

to look at in this Bulletin. Please take the time to have a 

close look at them and to discuss further with your Clipsal 

Representative. We look forward to hearing your feedback. 

Finally, I thank you for continuing to support Clipsal. We will 

continue to support you with further innovations and great 

service now and in the future. 

Damien Cummins 

Executive General Manager, 

Clipsal Australia Pty Ltd.

Saturn Pure White 

New Saturn 250V additions including Pure White 

The Saturn 250V Range has quickly established itself as Clipsal’s 

premium range of architecturally designed electrical accessories. The 

glass look fascias are especially appealing to any customer desiring the 

latest fashion styles and trends and providing you with great upselling 

opportunities. 

In addition to Ocean Mist and Espresso Black colour variants, Clipsal 

now introduces a new colour to the range known as Pure White. The 

Pure White option has no colour inflection, is simply stunning to view, 

and really does create a real point of difference. 

The Clipsal Saturn 250V range is an interior design solution that will 

complement every room of a home by enhancing all types of décor, 

including fabric, tile, metal, timber, splash back and paint selections. 

Going beyond just wall switches and power outlets; dimmers, cooker 

switches and communication plates are also available. Soft glow blue 

LED indicator light and labelling options provide a flexible solution for 

everyday installations or individual requirements. 

The entire Saturn 250V range has set new standards in home electrical 

accessories - offering switch and accessory design that is unlike any 

other 250V electrical accessories on the market. 

Fan Controller & Dimmer 

Another welcome new addition to the Saturn 250V range is a new 

Saturn Fan Controller and rotary switch mechanism as well as knob kits 

enabling you to fit off one and two gang switchplate configurations. 

The 4061VF3CSF Saturn Fan Control is a one gang Saturn plate that is 

supplied with a standard three speed capacitive fan control mechanism, 

compatible with Airflow and PDL ceiling sweep fans. It is available in 

three Saturn colours, Pure White, Ocean Mist and Espresso Black. 

A plateless version 4061CSFM is also available. 

Two dimmer and fan controller knob kits are available as well. The 

4062EDIM-KB comprises a fan controller and dimmer knobs plus 

chrome bezel, only for use in conjunction with universal dimmer 

mechanisms. 

Another kit, 4061EDIM-KB offers you the fan controller and dimmer 

knobs plus three bezels for vertical or horizontal switchplate mounting. 

visit clipsal.com/saturn 

4061VF3CSF 

Catalogue Numbers 

Clipsal Saturn fan controller 

catalogue numbers: 

4060CSFM 

Mechanism only (including 

capacitor block) 

4061VF3CSF 

Saturn fan controller plate 

Clipsal Saturn Dimmer & Fan 

Controller Knob Kits: 

4061EDIM-KB 

Knob kit, 1 gang, top hat type 

4062EDIM-KB 

Knob kit, 2 gang, rotary type 

Intermediate Mech 

Saturn & Impress intermediate mech makes multi-way switching easy 

We are now releasing an intermediate switch for both our Saturn 

250V and Impress ranges. 

Until now, controlling switching circuits at two locations was only 

possible using our two way mechanism. 

But with the new intermediate mechanisms, you can now achieve 

multi-way switching installations in areas such as stairwells, garages and 

outside perimeter lighting with ease. The intermediate mech enables 

switching circuits to be controlled at any number of locations using 

standard intermediate wiring practices. 

The Saturn and Impress intermediate mechanisms are rated at 10AX 

for fluorescent lighting loads. These have been tested under the most 

vigorous of circumstances and will offer many years of reliable service. 


30PBI 

Impress Intermediate mech 

60PBI 

Saturn 250V Intermediate mech 

TO 2-WAY 

TO 2-WAY 

TO 2-WAY 

TO 2-WAY 

30PBI 

60PBI 

3

Impress Slimline Eclipse 2000 

Impress now becomes a Classic 

The launch of Impress in March 

of this year has been well 

received. In fact, the feedback we 

are receiving from contractors and 

consumers is that everyone likes 

the new low profile push-button 

switch and in particular with the 

30PBL (LED) indication option. 

Until now Impress has only been 

available as a mechanism or 

preloaded in our Slimline and 

Eclipse ranges. 

Slimline and Eclipse Impress 

models are now available at your 

wholesaler in one to six gang 

standard size or one and two 

gang architrave size switchplates, 

with or without blue LED 

indicators. 

Due to the success and uptake 

of these ranges, we are now 

planning to release Impress in 

the C2000 Classic range, one 

of our most popular ranges of 

accessories. 

881,WE 894/2V 

4 

Of course, the 30PB and 30PBL 

mechanisms are available 

separately and will fit into any of 

our Clipsal switch ranges with 

a 30 Series aperture such as 

Standard range, 2000 Series and 

Metal Plate ranges. 

Important things to keep in mind 

when considering Impress is the 

mechanism’s whopping 20A rating 

and 16AX fluoro rating. Nothing 

compares! Also, the switching 

action occurs deep inside the 

mechanism, greatly reducing 

noise, arc flash and carbon 

deposits around the dolly. If you 

haven’t tried it, ask to see one 

from your Clipsal Rep. 

C2000 Impress Bulk 

Packs 

Until the assembled C2000 range 

becomes available, we will be 

making C2000 Classic Impress 

available to you “unassembled” 

in a choice of bulk promotional 

packs in the latter part of 2009. 

These will consist of 20 white 

electric switches in one or two 

gang configurations, with or 

without LED indication. 


Promo Pack 1: 

C2031VAPBPK,WE – 20 x 30PB; 

20 x C2031VH 

Promo Pack 2: 

C2032VAPBPK,WE – 20 x 30PB; 

10 x C2032VH 

Promo Pack 3: 

C2031VAPBLPK,WE – 20 x 

30PBL; 20 x C2031VH 

Promo Pack 4: 

C2032VAPBLPK,WE – 20 x 

30PBL; 10 x C2032VH 

30PB 

250V 16AX/20A 1 way / 2 way 

Push Button 

30PBL 

250V 16AX/20A 1 way / 2 way 

Push Button with blue LED 

indicator 

Modena Aged Care Solutions 

Easy Operation with Modular Design 

Modena 800 Series 

When it comes to surrounding 

yourself with style, comfort 

and flexibility you can’t go past the 

popular Modena 800 Series. 

Truly compatible with 

contemporary living, this classic 

range comes with large switches 

and easy to view indicators, 

offering a minimalist, low profile 

look that is unobtrusive amongst 

any modern interior. 

Catering for all applications the 

Modena 800 Series is designed 

with nothing but the best form, 

function and safety features in 

mind. Its flexibility is now pushing 

the range into applications such 

as health care, independent 

living, tourism and hospitality, 

where facilities must provide an 

adaptable, accessible and secure 

solution for users with different 

levels of mobility. 

visit clipsal.com/impress 

The fascias are available in 

nine colours - White, Chrome, 

Champagne, Gunmetal, Charcoal, 

Red, Blue, Blue and Platinum. 

Choice of either White or Black 

switch modules ensure there is a 

combination to suit all décors. 

You also have the convenient 

option of custom switch 

configuration - ideal for specialised 

applications. Whether you require 

three switches and a dimmer, six 

individual switches, audio/visual 

or data outlets, with Modena 800 

series the possibilities are endless. 

SC2032VAPBL,WE 

SL2033VAPBL,WE 

Modena 800 series

C2031E2PUDR 

2031E2PUDR 

IR Dimmer 

Universal dimming now available in push-button with 

remote control 

The Clipsal 2031E2PUDR Series Push Button Universal Dimmer 

represents the next generation of smart dimming products. 

The unit features a unique push button design, with cool blue 

multi-segment LED bar graph display to indicate the load status. 

The unit also features a handy Infrared Remote Control. Compact in size, 

the Remote Control is surprisingly powerful. It is capable of controlling 

up to 4 Dimmer Units and can even set preset lighting ‘scenes’ at the 

touch of a button! 

The Dimmer Unit is based on 

Clipsal’s patented Universal 

Dimmer Technology. It can provide 

full control of almost any type of 

load, whether it be incandescent 

lighting, 240V halogen or dichroic 

lamps, iron-core or electronic low 

voltage lighting transformers as 

used in downlight applications. 

Even small motor loads such as 

ceiling sweep and exhaust fans 

can be controlled. C-Thru® The 

Clear Choice - helping you select 

the right dimmer, first time, 

every time. 

Please visit clipsal.com/dimmer 

to see the dimmer in operation 

Smoke Alarms 

Firetek returns 

They’re back. Australia’s favourite smoke detectors, the 

Firetek 755SMA Ionisation models are back and better 

than ever. In case you needed reminding here are some of the 

features that made Clipsal Firetek Australia’s most preferred 

smoke detector. 

Firetek combines contemporary styling in a reliable mains 

operated design. It features a minimal overall diameter with a 

hush button to provide silent unwanted alarms. 

The detector modules are designed for fast-fit off. The detector 

module simply push fits onto the surface mounted base with 

shrouded quick-fit terminals which automatically provide power 

to the detector module. 

755SMA 

Surface Mount - Ionisation 


2031E2PUDR 

Push Button Universal Dimmer 

c/w IR Remote Control, 450W 

(2000 Series) 

C2031E2PUDR 



(Classic Series) 

SC2031E2PUDR 



(Slimline Series) 

SL2031E2PUDR 



(Eclipse Series) 

31E8TXIR 

Infrared Remote Control, 8 

Button (Spare Part) 

Features and Benefits: 

Soft Start - providing a 

noticeably smooth lamp 

illumination at turn on. 

Minimum Brightness 

Settings - factory preset to 

suit most applications. 

Thermal Overload 

Protection Circuitry - three 

levels of overload protection: 

Short Circuit Protection 

- ensures the dimmer can 

survive in case of wiring fault 

etc.. 

Thermal Overload 

Compensation - 

automatically reduces lamp 

brightness in case of overload 

Thermal Cutout - designed 

to blow in case of catastrophic 

circuit failure. 

High Frequency Ripple 

Signal Injection Immunity 

- ensures true flicker free 

dimming operation! 

 

755SMA Ionisation 

 

 

Hallway 

Corridor 

Study 

Home office 

5

Cool Remote Controlled Fans 

Airflow is a household name in ceiling sweep fans. Known for quality 

Aand 

offering many years of reliability, and now with the convenience 

of remote control operation. The remote controls have a 10 metre 

range making the fans suitable for rooms with high ceilings or existing 

buildings where cabling is difficult. A single remote control can even 

operate multiple fans located within a room. The remote operates three 

fan speeds and if a light is fitted, will even dim the lights. A wall mounted 

cradle is supplied to ensure you always have a location to store the 

remote when not in use. 

Airflow three blade fans 

Airflow has introduced two new 

three blade ceiling sweep fans 

also with the convenience of 

remote control. Fans are available 

in a traditional white electric colour 

to suit all types of décor, while a 

stainless steel version is a popular 

addition for more contemporary 

appeal. 

6 


ACES48ALR,WE 

White Remote Control Ceiling 

Sweep Fan 

ACES48R,SS 

Stainless Steel Remote Control 

Ceiling Sweep Fan 

PDL Five and four blade fans 

PDL’s remote controlled fans are 

available in three new models. 

These include a premium five 

blade fan with Satin Bronze body 

with black and silver blades as 

well as two four blade models 

in white or stainless steel. A 

reversing switch on the fan motor 

allows you to run the fan in reverse 

during winter to prevent warm 

air collecting at the ceiling and 

circulate it around the room. 

Matching accessories 

Both fan ranges are matched 

by an extensive list of new 

accessories including new 

Oyster or Clipper lighting fittings, 

designed to accommodate energy 

efficient compact fluorescent 

globes (not supplied). The fans 

have been pre-wired to allow the 

quick attachment of these light 

fittings to the bottom of the fans. 

For higher ceilings, a full range of 

down rods are available in hang 

sure and J-hook configurations 

ranging from 700mm and 

1200mm lengths in white and 

stainless steel colours. 


5HS1300SBR 

Modena Satin Silver/Black 

1300mm reversible, timber blade, 

aluminium body, prewired with 

light kit and infrared remote 

control, hangsure 

4HS1200R,WH 

White Aluminium, Four blade 

1200mm reversible, 

4HS1200R,SS 

Stainless Steel, four blade 

1200mm reversible 


Down rod 

DR48X1/2SS 

1200mm (48”) Down rod 

SS – hang sure 

DR48X1/2JSS 


SS J-hook 

DR30X1/2SS 


SS – Hang sure 

DR30X1/2JSS 


SS – J-Hook 

5HS1300SBR 

ACES48R,SS 

ACES48ALR,WE 

DR30X1/2SS 

OYWHT 

Oyster light fitting kit 

OYWHT 

Oyster light kit; white 

OYSS 


SS 

Clipper light fitting kit 

CLIPWHT 

Clipper light kit; white 

CLIPSS 

Clipper light kit; SS 

CLIPWHT 

4HS1200R,WH 

4HS1200R,SS

Sarel Adaptable Enclosure 

Innovative Adaptable Enclosures 

If you require rugged, flexible 

adaptable boxes for commercial 

or industrial applications Clipsal’s 

innovative new range of adaptable 

boxes has you covered. The 

entire range of adaptable boxes 

are manufactured from premium 

quality materials and packed with 

design features that benefit the 

installer. 

Sarel Adaptable Enclosures are 

available in a range of sizes and 

packed with superior features and 

benefits such as ultra fast quarter 

turn fixing screws, convenient 

internal fixing points and a clever 

hinge, which prevents the lid 

from being lost or stolen. Design 

features such as these provide 

you with a fast fit-off, saving you 

valuable time and money. 

Features: 

Programmable tariff rate 

Show Greenhouse Gas (GHG) 

emissions 

Easy to read LED display 

Colour-coded interface 

10A & 15A models available 

Features: 

Ultra fast quarter turn lid fixing 

screws. 

Clever hinge prevents lid from 

being lost or damaged. 

IP55 environmental protection. 

Concealed corner fixing points – 

retains IP55 rating. 

Insulating screw covers. 

Rear entry conduit knockout 

points. 

UV stabilised. 

High Quality European design. 

Halogen free. 

Manufactured from selfextinguishing 

polypropylene 

(PP). 

Convenient additional internal 

fixing points. 

Fixing lugs (sold separately). 

Operating temperature -30°C 

to 60°C. 

Colour – Grey RAL 7035. 

TUV certification – EN60670. 

IK07 (2J) impact protection. 

Ez Energy Audit 

Add energy auditing to your business offering 

With one of the highest take-ups of technology in the world, it’s no 

wonder that we spend $50 billion on energy usage per year. And 

with the price of electricity increasing each year, everyone wants to save 

a dollar. You can capitalise on this by adding energy auditing to your list 

of services with Clipsal’s new EzAudit Energy Audit Tool. 

The EzAudit is a power usage meter, which measures the amount 

of electricity consumption that common everyday appliances are 

using. You can now easily, accurately and safely analyse many of the 

power consumption characteristics of mains operated appliances. As 

an energy auditing tool, you can measure and record the amount of 

electrical energy drawn by an appliance, project hourly, quarterly or 

annual running costs, and estimate greenhouse gas emissions produced 

by operating the device. 

Finally you can have some control over your high electricity accounts, 

while at the same time helping the environment 

The EzAudit is perfect for helping your residential and commercial 

customers identify key areas of energy wastage and then offer them 

energy savings solutions using timers and sensors and other energy 

saving products. Market yourself as an ecosmart contractor. 

Easy to Use! 

Plug into outlet 

Plug in appliance 

Analyse and measure 

Record and Report 

What does EzAudit 

measure? 

Power (Watts) – Instant, 

Maximum, Minimum 

Cost ($) – Instant, Hourly, 

Quarterly, Yearly 

Energy (kWh) – Instant, Hourly, 

Quarterly, Yearly 

Greenhouse Gas Emissions 

(kg) – Instant, Hourly, Quarterly, 

Yearly 

Volts – Instant, Maximum, 

Minimum 

Amps – Instant, Maximum, 

Minimum 

Power Factor 

05057 

05045, 05047, 05050, 05053, 

05057 & 05059 

EZAUDIT - 10A version 

EZAUDIT15 - 15A version 

EZPOUCH - Soft Carry Case 

7

Clipsal High and Low Bay Lights 

Powerful Commercial Lighting 

Clipsal’s High and Low Bay 

Light range are the best 

option for most commercial 

applications, providing quality light 

and superior energy efficiency, 

making them ideal for operating 

over long periods. 

Low Bay Lights: 

Clipsal Low Bay Lighting is 

the perfect lighting solution for 

medium ceiling height industrial 

applications. Metal halide lamp 

technology provides optimum 

colour rendering and superior 

energy efficiency. 

Clipsal Low Bay Lighting is also 

supplied complete with glass lens 

and wire guards making them 

suitable for all low bay lighting 

applications. 

8 

Features 

Easy mounting system 

Powder coated steel 

construction 

Control gear mounted on 

removable tray 

Large terminal connectors 

Wire mesh as standard 

Glass sealed front as standard 

HPF0.9 

Easy access and ventilated 

gear housing 

E40 porcelain lamp holder 

Elliptical coated lamp included 

Uniform lighting distribution 

for medium ceiling heights. 

LBA250MH 

High Bay Lights: 

Clipsal High Bay Lights are ideal 

for general industrial lighting 

applications and use metal halide 

lamp technology to provide 

optimum colour rendering and 

energy efficiency. 

Clipsal High Bay Lighting is 

available with aluminium reflectors 

for greater optical control or acrylic 

reflectors to achieve upward 

lighting control, providing you 

with the perfect high bay lighting 

solution. 

Features - Quicksmart 

Maintained model 

Easy to install 

Wall or ceiling mounting, single 

or double sided and complete 

with all “running man” decals 

in one box 

Electronic dual rate constant 

current charging system 3.6V 

1600mAh 

Viewing distance 24m 

High temperature nickel metal 

hydride batteries 

Complies with AS/NZS2293 

1x18 LED lamps 

(20,000hr lamp life). 

Features 

Reflector ribbed aluminium 

Integral metal halide control 

gear 

HPF0.9 

Easy access and ventilated 

gear housing 

Flex and plug supplied and 

fitted 

E40 porcelain lamp holder 

Elliptical coated lamp included 

Suspension hook supplied 

Uniform lighting distribution 

for high ceiling heights 

Acrylic models offer vertical 

and upward lighting 

Acrylic drop lens available 

(only suitable for acrylic 

models). 

Clipsal Exit and Emergency Lighting 

Clearly Leading the Way 

Clipsal’s Exit and Emergency 

Lighting range is the best 

option to safely guide people 

out of buildings, office spaces or 

department stores. 

Clipsal Exit and Emergency Lights 

use advanced lamp technology, 

utilizing LED lamps which provide 

unsurpassed energy conservation 

with extended lamp life. 

EXITREC 

Clipsal Exit and Emergency Lights 

are easy to install and the modern 

design sets them apart from any 

other exit and emergency lighting 

on the market. There are two 

choices available, Quicksmart and 

Wafer. Quicksmart is designed for 

fast installation on walls or ceilings 

while the Wafer’s ultra slim design 

is suitable for architectural exit 

applications. 

EXITSM 

HBA250MH 

Features - Wafer 

Slim edgelite design flush with 

mounting 

Supplied with flex and plug 

fitted 


Osram LED lamps and long 

lamp life only 2.2W 

Electronic continuous current 

charging system 3.6V 60mA 

Viewing distance 24m 

High temperature nickel metal 

hydride batteries 

Complies with AS/NZS2293. 

LED strip light technology 

included 

50,000hr lamp life

Clipsal Fluorescent Lighting 

See the Light in Energy Savings 

Offer your customers an 

economical lighting solution 

with Clipsal Fluorescent Lighting. 

Clipsal’s Fluorescent Lighting 

range is ideal for any application 

where constant lighting for long 

periods of time is required, while 

consuming a minimal amount of 

energy. 

This range is suitable for 

residential, commercial and 

industrial applications, and 

provides optimum lighting for 

the lowest investment and 

running cost. In addition, Clipsal’s 

Fluorescent Lighting range can be 

surface mounted, conduit or chain 

mounted to suit your customers 

requirements. 

Clipsal Floodlights 

Bright Light Solutions 

Clipsal Floodlights are perfect for any application where you require 

expansive illumination from one or more light sources. The Clipsal 

Floodlight range offers extremely efficient operating costs with long lamp 

life and good colour rendering. 

Ideal for any residential or commercial project, Clipsal’s Floodlight Range 

comes in two lamp technologies for various floodlighting applications: 

Tungsten Halogen Floodlight: 

Clipsal’s Fluorescent Lighting 

range is available with T8, T5, 

PL or CFL lamps and can be 

provided with various dimming 

solutions to suit your project 

needs. Should you require 

analogue, digital, DSI or DALI 

lighting control contact your 

nearest Clipsal Representative. 

Features 

Body formed in steel white 

powder coating 

Polycarbonate end caps and 

lamp holders 

Recessed starters 

Colour 840 lamps included 

HPF0.9 

Diffused models with pattern 

12, formed acrylic 

Clipsal’s Tungsten Halogen Floodlights are suitable for residential lighting 

purposes. The main advantage with tungsten halogen lighting is its 

ability to provide instant bright light when turned on and it does not 

require a cooling off period before switching on again. 

Metal Halide Floodlights: 

Clipsal’s Metal Halide Floodlights offer the latest in lamp technology 

using a discharge gas lamp operated by control gear within the 

floodlight. 

Metal halide floodlights are ideal for applications where lighting is left on 

for long periods, while providing great energy saving benefits and long 

lamp operating hours. 

Easy twist lock gear tray for 

fitting cover without tools 

Range of reflectors and wire 

guards to suit 

End to end mounting 

possible with pre formed 

cable entry punch-outs 

Large terminal blocks for 

looping applications 

Control options available for 

DSI and DALI 

Emergency inverters on 

request 

Supplied with B2 energy 

saving ballasts or high 

frequency non-dimming 

electronics 

T5 models supplied with 

electronic high frequency 

non-dimming ballasts 

Wide body project battens 

suitable for industrial and 

retail applications. 

Features 

Die-cast body painted black 

Reflector specula aluminium 

Toughened front glass 

Integral control gear 

(MH models) 

HPF0.9 (MH models only) 

Stirrup nut protection cap 

(MH models only) 

Easy installation and lamp 

replacement with drop down 

glass front plate held with 

stainless steel or aluminium 

latches (MH models) 

Asymmetric reflectors 

(MH models only) 

IP54 and IP65 ratings 

Lamps included. 

BB218 

WP114 

CHF150 and 

CHF500 

FL250 and 

FL400 

9

Clipsal Exterior Lighting 

Stylish, Durable Outdoor Lighting 

Clipsal now offer exterior 

lighting that is ideal for any 

residential or commercial outdoor 

application. The new Clipsal 

Exterior Lights are available in two 

ranges, exterior bulkheads and 

decorative lighting, so there is sure 

to be a style to suit your needs 

and requirements. 

Bulkhead Exterior 

Lighting: 

Clipsal Bulkhead Exterior Lights 

come in round, oval and conical 

styles and are manufactured from 

marine grade 304 stainless steel 

with an IP 44 rating. 

Clipsal Bulkhead Exterior Lights 

are also compatible with CFL 

lamps, so you’ll save energy and 

money and enjoy the convenience 

a long lamp life of 8000 hours. 

10 

Features 

Die-cast aluminium 

construction 

Powder coated body 

Frosted glass lens 

E27 ceramic lamp holder 

IP44 weatherproof rating. 

CFL101SS 

WDL830 

Clipsal Downlights 

Shed Light in Style 

Downlights are fast becoming 

the most stylish way to 

shed light for many applications. 

Now an integral part of any well 

designed interior, downlights not 

only illuminate a room, but can 

also be used to create dramatic 

lighting effects. 

IRC Downlights: 

Clipsal’s IRC Downlights provide 

the same lumen output as a 

50-Watt dichroic lamp. However 

they only use 35-Watts of power, 

offering a 30% energy saving, 

while providing the same 5000 

hour lamp life as a dichroic lamp. 

CFL Downlights: 

Clipsal’s CFL Downlights are 

unique to the Australian lighting 

market and achieve 40 lumens 

per Watt. This range of downlights 

is the real answer for energy 

conservation without sacrificing 

aesthetics or size. 

Clipsal LED Lighting 

The Latest in Lighting Technology 

Clipsal’s LED Lighting utilises the latest electronic lighting diode 

technology, which provides an extremely long lamp life, exceeding 

50,000 hours. White and blue LEDs provide the pure colours, which 

is not possible to achieve with other light sources and allow them to 

operate at very low power consumption. 

Because LED lighting has no filaments they never require replacing and 

are very compact in size, while offering high resistance to vibration or 

shock. 

Exterior Wall Lighting: 

Clipsal Exterior Wall Lights are 

available in two ranges with 

energy saving halogen or CFL 

lamp options. Both ranges are 

manufactured from marine grade 

304 stainless steal and are IP 44 

rated, offering superior resistance 

to dust and water. 

Features - Halogen 

12V 1x20W and 2x20W low 

voltage dichroic halogen 

IP65 rating 

Marine grade 304 stainless 

steel 

 

 

Clipsal’s Metal Halide Downlights 

are designed specifically for the 

display lighting market, using 

metal halide lamp technology to 

provide high lumen output with a 

low operating cost. 


Stair/Wall Low Level Lighting 

IP65 Rated Lighting 

Cabinet Lighting 

12V Strip Kits 

12V Marker Lights. 

Features - Compact 

Fluorescent 

1 or 2x7 or 9W GX53 T2 CFL 

lamps non-dimming (lamps 

not included) 

Mains voltage 

Very low operating costs 

IP44 rating 

316WH CDL1ERF54/FP,BC 

L880WH 506WH

Energy Solutions 

Kill the Bill 

Energy Solutions, previously known as EES, is Clipsal’s new 

programme responsible for delivering energy solutions into the 

commercial market. 

If you’re a contractor undertaking a lighting fit-out or refit of a 

warehouse, factory or open plan office, we urge you to tap in to our 

resources to offer your clients an energy efficient lighting service that 

saves them energy and reduces their running costs 

Clipsal Energy Solutions can help you win that next commercial project 

with an energy audit and also assist with the lighting specification and 

design, installation and warranty program. It doesn’t matter if the lighting 

project is for new construction or a retrofit building, improved energy 

use, lower operating costs, reducing greenhouse gas emissions and 

achieving a higher NABERS energy rating are our specialty. 

Win the business on the promise of saving your client’s money in 

reduced energy bills and we will help you deliver the goods. 

413,TR Surface Socket 

Clearly the best 

More often than not, surface sockets are installed in tight fitting 

ceiling spaces, which is why the 413 TR Surface Socket is 

designed to make your job just that little bit easier. 

Clipsal’s 413 Surface Socket is now available with a clear body so you 

can simply view the wiring without having to remove or disturb the 

installed socket. It is perfectly suited to residential installations, where 

the socket outlet is used as a junction for multiple switching or other 

complex wiring configurations. 

The 413,TR Surface Socket is equally suited to commercial installations, 

as it enables the installer to have a clear view of how each outlet has 

been wired, making it ideal for simple fault finding. 413,TR 

600SM Surge Protector 

Stop the Surge! 

Protect your expensive electrical equipment from energy surges 

and spikes with a Surge Protector. Voltage pulses of even very 

low energy can produce interference and damage to modern electrical 

equipment. 

The 600SM Surge Protector Module provides protection from small 

to moderate energy surges and spikes, which propagate through the 

mains circuit due to indirect lightning strikes, switching highly inductive 

loads (large motors), noise from control devices, etc. 

Typically the 600SM Surge Protector Module is used in a 695X Switched 

Socket, however it is compatible with any 600 Series product with a 

spare module aperture. Simply snap the module into the aperture and 

terminate! 

KW/2 Reflectors (Cut 

Your Kilowatts in Half) 

The KW/2 specular material is 

an advanced technology that is 

formed into engineered reflectors, 

to provide superior optical and 

performance properties of lighting 

luminaires. Exclusive to Clipsal, 

and in use since 1992, the KW/2 

material has demonstrated lighting 

energy savings of up to 60%, 

in over 1,000 projects across 

Australia. 


CTTR136ELW840S 

T-bar troffer with KW/2 reflector 

and single 36W T8 


LED indicator – surge 

protection is available while 

the indicator window is 

illuminated. 

PDL 600 Series modular 

mounting. 

Clearly labelled flying lead 

terminals – for ease of wiring. 

Selectable colour-matched 

cover plates. 

Complies with AS/NZS 3100. 

CTTR136ELW840S 

(Diffusers sold separately) 

600SM 

11

C-Bus ® Saturn Stainless Steel Wall Switches 

The world’s best looking switch 

Clipsal Saturn Stainless Steel 

in now available across the 

C-Bus range! Featuring a brushed 

metal finish faceplate, with a 

clip-on design that eliminates 

unsightly screws. Wall switches 

are available in 2,4 6-button 

and DLT (Dynamic Labelling 

Technology) T 

wall switches and 

can be matched with the Stainless 

Steel C-Touch Colour and Black 

& White Mk11 Touch Screens 

and the single zone and 4 zone 

C-Bus Thermostats. They are an 

excellent addition to contemporary 

homes and designer commercial 

environments such as offices and 

restaurants. 

C-Bus ® 30 Mechanisms 

A Simple Switch to C-Bus 

Now you can conveniently turn 

any Clipsal grid plate that 

fits a 30M aperture into a C-Bus 

switch, thanks to the C-Bus 30 

Mechanism (30 Mech). 

The C-Bus 30 Mech switch is 

available as either a Master, 

Master with IR capability or 

Slave configuration. The required 

Master can accommodate up to 

three Slaves. The Slaves clip into 

adjacent 30M apertures on the 

grid plate. 

The C-Bus 30M series offer all the 

features found in the latest C-Bus 

Features: 

Fits any Clipsal grid plate 

with a 30M aperture (sold 

separately). 

Available as Master and Slave 

mechanisms. 

Master mechanisms can 

accommodate up to three 

slaves. 

Master available in IR or non- 

IR models. 

Programmable as on, off, 

toggle, dimmer, timer, scene 

control and custom functions. 

12 


Brushed stainless steel finish 

Smart, framed design 

Available in 2 button, 4 

button, 6 button and 5 

button DLT 

switches. These features include 

dual-colour LEDs (selectable 

blue or orange) as well as scene 

control. The Master with IR is 

compatible with all C-Bus infrared 

remotes offering four extra virtual 

keys that operate with the remote 

control. 

Terminating the C-Bus cable to 

the C-Bus 30 Mech Master is 

performed using the innovative 

fly lead. The fly lead provides a 

method to easily connect and 

disconnect the mechanisms 

during installation and 

commissioning. 

Nightlight feature. 

Fall back level option to dim 

indicator at a set time after 

the last button press. 

Programmed via Learn Mode 

or the C-Bus Toolkit software. 

Master draws 18mA from the 

C-Bus network. 

Labelling option for each 

button. (Master supplied with 

pre-printed labels. 

Available in white only. 


5082NL-J80 

(C-Bus Saturn Wall Switch, 

Stainless Steel Fascia, 2 button) 

5084NL-J80 



5086NL-J80 



5085DL-J80 


Stainless Steel Fascia, 5 button 

DLT) 

2032VH grid C2033VH grid C2032 grid 31VHWP grid 

5031NMMIRL 5031NMML 5031NMS 


5031NMML 

(C-Bus 30 Mechanism Master) 

5031NMMIRL 

(C-Bus 30 Mechanism Master + IR) 

5031NMS 

(C-Bus 30 Mechanism Slave) 

5082NL-J80 

5086NL-J80 

5084NL-J80 

5085DL-J80 

SC2032VH grid

C-Bus ® Extra Low Voltage (ELV) Relay 

Switch extra low voltages 

The C-Bus 8 Channel Extra Low Voltage (ELV) Relay is purposedesigned 

to provide C-Bus with the ability to switch extra low 

voltages and signal wires. Powered from C-Bus and housed in a dust 

proof enclosure, the C-Bus ELV Relay offers eight single-pole, double 

throw (changeover) relay contacts. 

Each of the contacts is rated to switch current loads up to 2 Amps, 

including inductive loads such as the coils of irrigation solenoids and 

electric door strikes. Pulse control of devices such as garage doors, 

vehicle access gates and certain blind and curtain motors can easily be 

achieved with the C-Bus ELV Relay. 

The changeover contacts are perfect for controlling ELV air-conditioning 

dampers with “power to on, power to off” requirements and are also 

suitable for “power to on, spring return” air-conditioning damper 

applications. 

The enclosure is designed for surface mounted installations and is 

designed to handle higher operating temperatures, such as in garden 

sheds where irrigation control often occurs. 

Mounting holes and keyhole mounting options are provided with a 

reversible lid for the chosen orientation. In addition, all terminal blocks 

are removable and clearly marked, while local override buttons are 

provided for testing purposes. 


Complements the C-Bus 

Multi-Room Audio (MRA) 

system 

Nominal 6 or 8 ohm speaker 

also suitable for any audio 

application 

Holographix speaker is similar 

in size to a downlight 

In-ceiling speakers come 

complete with back boxes to 

maximise and control bass 

response whilst keeping out 

dust. 

In-ceiling speakers are 

available in white (can be 

painted to match the décor) 

Outdoor speakers contain a 

marine grade waterproof, all 

weather enclosure 

Outdoor speakers are 

available in black or white 

L5108RELVP 


8 x single pole, double throw 

(change over) relays. 

Powered from C-Bus, draws 

32mA. 

Contacts rated 2A (AC3) @ 

30V d.c. max or 30V a.c. RMS. 


L5108RELVP 

C-Bus 8 Channel ELV Relay 


5600K01-WE 

(Krix Holographix Speakers, 

Pair, In-ceiling, 3 inch full range, 

White) 

5600K02-WE 

(Krix Hemispherix Speaker, 

Single, In-ceiling, 4 inch 2-way, 

White) 

5600K03-WE 

(Krix Atmospherix Speaker, 

Single, In-ceiling, 5 inch 2-way, 

White) 

5600K06-WE 

(Krix Aquatix Speakers, Pair, 

Outdoor, 5 inch 2-way, White) 

5600K06-BK 

(Krix Aquatix Speakers, Pair, 

Outdoor, 5 inch 2-way, Black) 

5600K07-WE 

(Krix Tropix Speakers, Pair, 

Outdoor, 6.5 inch 2-way, White) 

5600K07-BK 

(Krix Tropix Speakers, Pair, 

Outdoor, 6.5 inch 2-way, Black) 

Relays can operate in pairs. 

Local override buttons. 

Temperature rated to 50°C. 

IP5x rated enclosure (dust 

proof. 

Removable terminal blocks. 

Clipsal Krix Premium Speaker Range 

C-Bus never sounded so good 

Clipsal has now partnered with Krix to add high end speakers to its 

C-Bus Multi Room Audio offering so that your C-Bus customers 

can enjoy a premium sound solution, perfect for home theatre, multiroom 

audio and outdoor applications. 

The addition of the Krix name, Australia's premier manufacturer of 

consumer stereo and home theatre loudspeakers, now speaks volumes 

for the C-Bus’ Multi Room Audio credibility. Krix supplies its speakers to 

over half the commercial cinemas throughout Australia. 

5600K03-WE 5600K02-WE 

5600K01-WE 

5600K06-BK 

5600K07-BK 

13

Epic organiser 

A single, simple connection panel for every digital device 

quick peek into the luggage of the modern traveller typically reveals 

A a collection of electronic devices. You might find a laptop computer, 

a digital camera, an MP3, a portable DVD player, PDA and more. Few 

hotels or motels are equipped to allow guests to get the most from their 

gadgets. Typically, outlets are scattered around a room and are difficult 

for guests to reach. Now, thanks to Clipsal’s innovative EPIC Organiser, 

can offer consultants, architects and specifiers a customised solution 

that is compatible with all guest devices. 

Epic is available in a choice of three fascia finishes (two to five gang) and 

seven connection modules including single GPO, S-Video, HDMI/USB, 

RJ45 and more. Epic also offers you fire rated wall-boxes for hotels, 

pre-terminated in-wall cables to reduce installation time and one metre 

fly leads that are used to connect devices to the wall plate. 

Masthead amplifier 

Give your antenna signal a serious boost 

Multiple TVs in the home weaken the antenna signal potentially 

creating a poor quality reception on each TV. 

To combat this Clipsal’s new Masthead Amplifier increases the strength 

of signals received to a level greater than the losses in the distribution 

system. The amplifier gain determines the level of signal increase, 

enough to provide an acceptable signal level to all televisions in the 

system. 

The amplifier simply attaches to the existing antenna mast via a u-bolt 

clamp and comes with a power supply and adaptors to inject power 

from your normal wallplate back up to the masthead amplifier via the 

existing coaxial cable. 

The amplifier is compatible with both analogue and digital antennas and 

is fully weatherproof to deliver many years of reliable service. 

Clipsal Punchdown Tool & Blade 

Terminate patch panels perfectly 

The Clipsal range of data communications products stands alone as 

the most instantly recognisable on the market today. Their design 

is like no other right down to their data jack design. That’s why Clipsal 

recommends that when terminating data cables to jacks that you use 

the new punch down tool and blade to avoid the risk of damage to the 

patch panels. 

The tool consists of a handle with a spring mechanism inside. To use the 

punchdown tool, insert the conductor into the slot on the rear of your 

RJ45 connector, insert the tool on top of the conductor and press hard 

on the tool. This requires a bit of pressure until, with an audible snap, 

the wire is stripped and contact made as it is pushed down between 

the two punchdown block blades. Terminate the job right, the first time, 

every time. 

14 

Epic is easy to order: 

Choose modules to suit the 

services you need; i.e. HDMI, 

USB, audio, VGA etc. 

Choose your fascia; white 

glass, black glass or metal 

finish. 

Pick your wall grommet 

See Clipsal Trade Product Guide 

and Epic Organiser brochure 

#19858 for complete product list 

and catalogue numbers. 

Product features: 

Digital and analogue 

compatible 

Weatherproof 

Fully Shielded 

F-type connections 

UHF/VHF combiner, 35dB 

UHF, 18dB VHF, 

Comes with power supply 


Moulded grip for ease of use 

Spare blade housed within 

the tool 

Positive and Negative gain 

switch 

Blade is double ended 


TRJ45PDT 

Punchdown tool blade Category 6 

TRJ45PDTB 

Tool Blade Replacement 

Select the wallbox to match 

your fascia and modules 

Select appropriate in wall 

cables to suit your modules 

Select one metre fly leads to 

connect your AV devices to 

EPIC 


3105MH35U18V 

Masthead Amplifier, Fully 

Shielded F-Type, 35dB UHF, 18db 

VHF, comes with Powerpack and 

injector. 

TRJ45PDT 

TRJ45PDTB 

3105MH35U18V


30HDMIS,WE 

HDMI,30 Series mechanism, 

Straight Rear connection, White 

30HDMIA,WE 

HDMI,30 Series mechanism, 

Angled Rear connection, White 


HDMI adaptors suits all 

Clipsal wall plates 

Delivers full HD picture to 

your TV 

Choice of straight or angled 

rear connection 

Telephone Accessories and ADSL2+ Filters 

For all telephone and home office needs 

Australians are in love with the 

internet. In fact, almost 70% 

or 43 million Australian homes are 

now online. And with the uptake 

of broadband increasing by more 

than 20% each year since 2007, 

more households are screaming 

out for telephone and internet 

connections. 

That’s why we’ve made it quick 

and easy for you to drop into 

your wholesaler and grab all 

the telephone accessories and 

ADSL2+ Filters you need. 

There are more than 30 products 

in the range, including cable 

stripping and crimping tools, 

splitters, couplers, cords, cable 

and more. It’s all available in 

hangsell packaging for quick and 

easy selection. 

HDMI Adaptors 

Make your HDMI adaptors look good from any angle 

Australians are investing big dollars in high definition TV with many of 

them choosing to wall mount their big screens, preferring the clean 

and uncluttered look this offers. Although the wall mounted look is hard 

to beat, no one likes to see exposed cables “dangling” between the TV 

and the video source. Clipsal has responded to this by producing some 

options to offer your clients a neat and streamlined means of concealing 

the cable. 

Our new 30 Series straight and angled HDMI adaptors are designed 

to install behind the TV as well as the video source. Both straight and 

angled HDMI Adaptors fit into standard Clipsal wall plates. The straight 

adaptor is designed for conventional installations where there is ample 

space behind the wall plate. 

The angled adaptor is designed for installations where rear termination 

space is restricted and cable needs to be routed to the top or bottom. 

30HDMIS,WE 

Product features: 

Suit 610/611 telephone points 

Full range of splitter, couplers, 

cord & cable 

Filters are all ADSL2+ 

Filters are Telstra approved 

All products are a-tick 

approved 

Crimping & stripping tools 

Customer benefits: 


Plug & play in most occasions 

Full Clipsal warranty 

30HDMIA,WE 

3110DSL2FS 

3110RJ11CC8 

3110DSL2SSF3 

When no adaptors are 

required 

When you dont want to spend 

time re-terminating cables, our 

new Bull Nose wall plate will 

allow you to run your existing 

cables through the wall while still 

providing a neat and streamlined 

installation. Simply install a bull 

nose wall plate out of view behind 

the TV and video source. 


3105BNW,WE 

Bull nose Wall plate - allows 

pre-terminated cables to connect 

direct to TV 

3105BNW,WE 

3110SK610 

3110CPRJ45 

3110CBLSTL 

15

56 Series Covers 

Innovators not imitators 

They say imitation is another form of flattery and at Clipsal Australia we know this all too well. At Clipsal 

we never rest on our laurels, and while others are busy copying we're busy getting better with the new 

generation 56 Series switchgear. We have listened to contractors and the user by taking a good look at 

design and engineering improvements to make installation and access easier and to improve overall product 

endurance. So what do you get? 

The first thing you’ll notice is the new switch design. It’s 2% larger, ideal for gloved operation. We’ve increased 

its padlock area (8mm shank) and lowered its position to reduce dirt build up. The next thing you’ll notice is 

the larger socket flap and gasket design. The flap opens a further 43% than before making it easier to plug 

into and it’s actually 25% stronger than its predecessor so it can put up 25% more impact resistance in those 

tougher environments. The latch spring has been redesigned so it will last and last. 

Keen eyes will notice that we’ve done away with stickers and replaced them with permanent printing on the 

enclosure itself. This will never wear away and your customers in the food industry won’t have to worry about 

stickers peeling off and falling into places where they shouldn’t. 

We guarantee our IP66 rating. How? Because our single piece rear gasket is co-injected. It won’t shrink in 

harsh environments or create a potential safety hazard. 

Our new 56 Series Switchgear covers are fully backwards compatible so you can fit them to existing bases. It’s 

not a problem. The range is currently available in Chemical Resistant White and Orange, with Grey 

options soon. 

Features: 

Guaranteed IP66 Rating 

Superior durability 

Tougher than ever 

Ergonomic latch 

Prominent and raised ON/OFF 

switch marking that will never 

wear away 

56 Series DOL Starters – Series 2 

Smart at work 

Our 56 DOL Motor Starters have always been known for being 

extremely hard workers. But now they’re working smarter for you 

too. The new Series 2 range is packed with features to make your job 

easier when you’re on the tools. 

The T base mounted control gear is no longer hard wired to the cover. 

This T makes it easier for you to inspect the terminals and will save you 

time should you need to replace the cover. We’ve also given you more 

room inside the enclosure. That extra space will allow you to terminate 

cables just that little bit easier. There’s no compromise on power either 

as we now offer you switched versions from 1 Amp upwards. 

But we’ve saved the best for last. Our Series 2 DOL Starters now have 

world famous Telemecanique control gear. No matter how hard or 

tough the environment is, these contactors ensure permanent, quality 

tightening of the cable conductors to provide a stronger and safer long 

term connection. Reliable and compact and easy to install, you won’t 

find better than these. 

16 

Co-injected single piece rear 

gasket 

Pivot bungs removed for 

added durability 

Redesigned socket flap – 25% 

stronger 

Redesigned latch spring – 

more durable and easier to 

operate to aid plug installation 

Permanent laser marked 

specifications 

Co-injected socket gasket, 

prevents shrinkage in harsh 

environments 

Larger area for switch 8mm 

padlock shank 

Chemical resistant versions 

available. 


Base mounted control gear 

No longer hard wired to cover 

More room for wiring 

maintenance 

Switched versions now go to 

1amp 

Now with world renowned 

Telemecanique control gear. 

Chemical resistant spare 

covers available. 

See Clipsals 56 Series Catalogue 

for complete product list and 

catalogue numbers. 

See Clipsals 56 Series Catalogue 

for complete product list and 

catalogue numbers. 

56DOL9/1S 

56DOL12/1R 


56DOL9/1S 

4kW, 9A AC3, 25A AC1. 

Supplied with LRD05 0.63 - 

1.0A overload

56P310 

Colours available: 

Chemical resistant Orange 

(RO), Electric Orange (EO), 

Chemical Resistant White (RW) 

and Grey (GY) 

Three Phase Plugs 

Hard case 56 Series 

It’s a tough hard world out there. That’s why you need the new Clipsal 

56 Series Quick Connect Terminals (plug and connectors) for all 10A & 

20A single and multi-phase heavy machinery applications. 

The handles are ergonomically designed to suit the hand of an average 

adult and are available in straight and angled designs for various 

industrial uses making them very easy to use. The plug retainer has 

been designed to allow a wider lock ring for simple removal from ‘any’ 

socket outlet. 


Ergonomic handle promotes 

correct plug use 

Better cable entry set up 

negates the need for the 

“onion ring” sealing 

Screwless assembly utilizes 

latching spring allows for 

speed, simplicity, product 

strength and improved 

reliability 

56 Series 240V plugs 

Extra tough plugs 

Industrial plugs are the unsung heroes of the work force. Through habit we expect them to survive impacts 

against hard surfaces, being run over by trolleys, and being yanked against doorways and away from 

machinery. In other words they need to be tough. Our new and improved 250V Single Phase Plugs and socket 

connectors are our toughest yet. 

The new plugs are made from high quality industrial grade resin to provide superior impact and UV resistance. 

The locking ring is held captive on the plug front to create a single piece. This ensures the plug’s IP66 rating. 

It is perfect for any application where you need protection from dust and water. The internal mechanisms are 

made from stainless steel and brass to ensure constant and reliable operation. Whatever the conditions. the 

new design features smooth, clean lines to minimize food and waste build-up, ideal for food industries. 

And then there’s the improved installation features. All plugs have the reliability of a cord clamp and the 

convenience of rear M20 rear thread and cable entry for terminals. To help you terminate the wires we’ve 

designed a hinged cord clamp that swings out of the way. And to make sure the cables stay put we’ve 

included captivated screws. These can not be lost. 


56P310 

250V 10A - 3 Flat pins 

56P310SL 

250V 10A - 2 Flat pins and round 

earth 

56P315 


56P320F 


A stronger cord clamp and 

body sleeve connection 

Wider lock ring, easier to 

unscrew from sockets 

Colours available: 

Chemical resistant Orange 

(RO), Electric Orange (EO), 

Chemical Resistant White (RW) 

and Grey (GY) 

56P210 

250V 10A - 2 Parallel flat pins 

56P215/32 

32V 15A Extra low voltage 2 pin 

polarised 

56P3/110 

110V 10A - 2 Round live pins and 

flat earth 

The optional Quick Connect Terminals and gland are 50% faster to 

install than conventional industrial plugs. Compared with traditional 

“screw-in” terminals, the Quick Connect design uses a latching spring 

to secure cables far more reliably. The innovative snap-shut body means 

that assembly is screwless. The latching spring clip stays down once it is 

pressed, so it is just a simple ‘press and twist.’ This results in a stronger 

body and sleeve connection. The join will not come apart or become 

loose from machinery vibration or other causes. 


Add QC to part number when 

ordering 

56PA420 

56P310RP 

250V 10A - 3 Round pins 

56CSC310 


56CSC315 


17

South Australian Meter Box 

SA Meter box isolators now with lock off facility 

Due to recent wiring regulations by ETSA Utilities, South Australia's 

primary electricity distributor, we’ve made some important new 

changes to our 230DRAS meter boxes. 

These now include a new meter isolator lock off facility in the off position 

only with sealing facilities for single customer installations, specifically 

designed to meet the new ETSA Utilities requirements (S&IR – 

ref. clause 5.5.1). 

There are two models available, the 230DRAS1MI and 230DRAS2MI 

offering various size meter panels. 

18 


230DRAS1MI 

21 Module switchboard and 

single meter box, Complete with 

230MIC163, H612 x W410 x 

D254mm 

230DRAS2MI 


multiple meter box, Complete 

with 230MIC163, H860 x W410 x 

D254mm 

230 Series Victorian Meter Box 

Meters ahead for installation and safety 

Our new Clipsal 230 Series of Exterior Victorian meter and Combined 

meter/Switchboard enclosures are designed for easy installation 

and consumer safety, with a range of functional options to suit any 

application. 

Constructed from robust, spot welded Galvabond, the boxes have an 

attractive merino beige painted outer finish. The doors can be held open 

at 100 degrees and are easily removed if required. Our special hinge 

design helps door location and is therefore easy to replace. Ventilation 

louvres are designed to suit IP23. 

970RM/120 Surge Arrestor 

High discharge surge arrestor 

The new 970RM/120 is a new addition that offers a higher discharge 

Tcapacity 

and sensitivity as well as a fast reaction time to ensure 

efficient and reliable levels of surge protection. This new model is 

designed to withstand the current impulse many times over. Just two 

modules wide, the new 970RM/120 offers you the protection you need 

without taking up valuable switchboard space. It’s also fast and easy 

to install. The removable module allows quick replacement without the 

need to disconnect wiring. 

230MIS Meter Isolator Enclosure 

Supersized meter isolator enclosure 

The new 230MIS meter isolator enclosure is just what you need for 

installing small groups of circuit breakers. It has a 3 module wide 

capacity yet because it is longer in size allows you ample room to install 

16mm² consumer mains cables to bend into miniature circuit breakers. 

The device is suitable for current limitation and mains isolation. 


230DRAV2 


meter box 

Specifications 

Imax: 120kA (8/20) 

In: 60kA (8/20) 

Up < 2.1kV 

Uc: 340Va 

230MIS3 

230DRAS1MI 

230DRAV2 

970PM/120 

970RM/120

Moduline TAL Plus 

Control Your Cabling 

Moduline TAL PlusTM skirting 

ducts represent the latest 

design evolution and development 

in the Moduline cable duct range. 

It is the first truly universal skirting 

duct available in Australia, offering 

superior features and benefits 

such as incorporating separate 

compartments for power and 

voice/data cables, an additional 

“drop in” barrier to convert from 

two to three divisions. 


Extruded aluminium body. 

Quality powder coated or clear 

anodised finish to exposed 

surfaces. 

Drop-in duct lids 

manufactured from rust proof 

steel and finished in thermally 

bonded vinyl veneer, powder 

coat or clear anodised finish. 

“Clip-in” aluminium extruded 

lid provides a superior finish. 

Tool removable “clip-in” lid 

provides extra security. 

One duct body design 

makes specification and 

ordering easier. 

Pre punched lid covers 

for service outlets provide 

ease of fit off. 

Internal shrouds provide 

segregation and secure 

fixing of outlets. 

2.4m lengths for easy 

handling. 

Available in black, opal grey 

and white colours or natural 

anodised finish. 

Easy peel protective film 

to prevent damage to the 

coated finish. 

Performa Mesh Cable Trays 

High Performas in any environment 

Moduline’s Performa Mesh Cable Trays provide an ideal solution to 

route power and data cables in industrial and commercial building 

applications. 

The Performa mesh range is manufactured from high grade steel or 

stainless steel with the option of electro-zinc, bi-chromatic and hot dip 

galvanized coatings, providing superior corrosion resistance. 

Performa Mesh Cable Trays are also available with a range of 

accessories and components such as lids, wall dividers, joints, custom 

profiles and brackets for all sizes. 

GRP Cable Management Systems 

Corrosion resistant composite technology 

If you’re about to price an industrial job or in discussions with the 

project engineer for a major project, then you need to seriously take a 

look at Moduline’s new Glass Fibre Reinforced Polyester (GRP) Series of 

composite cable trays, duct, cable ladders and accessories. 

The new GRP Series cable trays incorporate the innovative Cabsys 

tray system. The Cabsys system has been carefully designed to 

provide Cable Ducting which combines high performance with ease 

of installation and maintenance. For areas where extreme corrosion 

resistance, zero halogen properties or hygiene is the overriding factor. 

The GRP Channel Support Systems are the perfect accompaniment to 

other Moduline industrial support products and are ideal for mounting 

other industrial service items such as pipework and ducting. The GRP 

Series are manufactured from Fibastrut, which offers high rigidity 

coupled with a superior load bearing to weight ratio, while being totally 

resistant to a wide range of corrosive agents. 


Lightweight 

High loading capacity 

Quick fit coupler 

Fast fix brackets 

Reduced installation time 


Low whole life costs 

Corrosion resistant and 

maintenance free 

Low installation costs 

Strong yet lightweight 

Easy to cut and handle on site 

Reduced installation time 

GM and GN Series 

19

NEW PRODUCTS AT A GLANCE 

Saturn Fan 

Controller & Dimmer 

Page 3 

Sarel Adaptable 

Enclosures 

Page 7 

Stainless Steel 

Wall Switches 

Page 12 

56 Series 

Covers 

Page 16 

56 Series 

DOL 

Starters 

Page 16 

Intermediate 

Mechanisms 

Page 3 

C-Bus ® 30 

Mechanisms 

Page 12 

EzAudit 

Page 7 

240V 

Plugs 

Page 17 

Clipsal Australia Pty Ltd 

A member of Schneider Electric 

Head Office 

33-37 Port Wakefield Road, 

Gepps Cross, South Australia 5094 

Website clipsal.com 

Contact us clipsal.com/feedback 

National Customer Care Enquiries: 

1300 2025 25 

National Customer Care Facsimile: 

1300 2025 56 

printed on recycled paper 

CLIPCOM 19741 September 2009 

Slimline Impress 

Eclipse Impress 

Page 4 

Extra Low 

Voltage Relay 

Page 13 

Three Phase 

Plugs 

Page 17 

South 

Australian 

& Victorian 

Meter Boxes 

Page 18 

Modena Aged 

Care Solutions 

Page 4 

Lighting 

Range 

Page 8-10 

Krix Premium 

Speakers 

Page 13 

970RM/120 

Page 18 

Infrared 

Dimmer 

Page 5 

Epic 

Organiser 

Page 14 

230MI 

Page 18 

International Enquiries 

International Sales and Marketing 

Email export@clipsal.com.au 

Schneider Electric (NZ) Ltd 

38 Business Parade South, Highbrook, 

East Tamaki, Manukau 2013, 

NEW ZEALAND 

Telephone + 64 9 829 0490 

Facsimile + 64 9 829 0491 

Website www.schneider-electric.co.nz 

Clipsal Customer Care 

Freephone 0800 652 999 

Freefax 0800 101 152 

Email sales@nz.schneider-electric.com 

Website www.clipsal.co.nz 

www.pdl.co.nz 

KW/2 

Reflectors 

Page 11 

Mast Head 

Amplifier 

Page 14 

Moduline 

TAL Plus 

Page 19 

Smoke 

Alarms 

Page 5 

413,TR 

Surface Socket 

Page 11 

Punch 

Down Tool 

Page 14 

HDMI 

Adaptors 

Page 15 

Performa Mesh 

Cable Trays 

Page 19 

© Clipsal Australia Pty Ltd 

The identified trademarks and copyrights are the property of Clipsal Australia Pty Ltd unless otherwise noted. 

Remote Control 

Ceiling Sweep Fans 

Page 6 

600SM Surge 

Protector 

Page 11 

Telephone 

Accessories 

Page 15 

Corrosion 

Resistant GRP 

Page 19 

You can find this brochure and many others 

online in PDF format at: clipsal.com 

Follow the links off the home page or access 

the following page directly: 

clipsal.com/brochures 

Clipsal Australia Pty Ltd reserves the right to change 

specifications, modify designs and discontinue items 

without incurring obligation and whilst every effort is 

made to ensure that descriptions, specifications and 

other information in this catalogue are correct, no 

warranty is given in respect thereof and the company 

shall not be liable for any error therein. 

C3-011 

O/N 19741

New Product Bulletin - October 2009 (Issue 2), 19741 - Clipsal

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?