Installation Instructions - F2338/01 - 8000IREX, StarServe ... - Clipsal

More documents

Recommendations

Info

8000IREX StarServe IR Expander Installation Instructions 1.0 Description The Clipsal 8000IREX is used to expand the IR system of the Clipsal 8073/8VHPIR Video Distribution Unit (VDU). It provides up to 64 outputs with IR control (8 VDUs using the outputs from the master VDU). The 8000IREX passes IR signals from the expansion VDUs to the master VDU. All broadband and modulated signals brought to the main panel are available at the expansion VDU outputs with minimal signal loss. 2.0 Important Notes • Each expansion VDU must be powered by its own separate power supply. • Modulators connected to the expansion VDUs will only be viewable on outputs from that expansion VDU. • Bidirectional (12V) IR signals are not bidirectional to other expansion VDUs. Bidirectional IR signals will only function within the original expansion VDU and master VDU outputs 3.0 Installation To install the IR Expander: 1) Connect the 8000IREX between an output of the master VDU and an input of the expansion VDU. Ensure to connect the expansion VDU to the system side of the 8000IREX. 2) Connect the IR cable to the 8000IREX and plug the input jack into to the IR socket on the Expansion Hub. 3) Plug the 12V d.c. supply into the 8000IREX and switch on. Refer to the installation diagram in Figure 1. © Clipsal Australia Pty Ltd
8000IREX StarServe IR Expander Installation Instructions 8050P12/1600 Power 12VDC B pwr © Clipsal Australia Pty Ltd IR Power 12VDC B pwr IR Video Distribution Unit (3 input × 8 output) w/IR Engine 1 2 3 4 dulators tv output 5 6 7 8 Master Hub Video Distribution Unit (3 input × 8 output) w/IR Engine dulators tv output CATV /ANT 7 SYSTEM 1 2 3 4 57 6 7 87 8000IREX CATV /ANT 7 Power 12VDC B pwr 7 SYSTEM TV 7 TV 7 Figure 1 - Typical installation IR Antenna Connect to any output port Video Distribution Unit (3 input × 8 output) w/IR Engine 1 2 3 4 dulators tv output CATV /ANT 7 5 6 7 8 8050P12/1600
Page 1: StarServe IR Expander 8000IREX Inst

Installation Instructions - F2338/01 - 8000IREX, StarServe ... - Clipsal

Create successful ePaper yourself

Delete template?

Save as template?