Regulators - Victor Technologies

More documents

Recommendations

Info

NOT JUST SAFE. VICTOR SAFE. Follow these rules for maximum safety on the job. 3 Inspect 6 Carefully 134 G E N U I N E S I N C E 1 9 1 3 1-800-426-1888 www.victorequip.com regulator inlet and cylinder valve for any evidence of oil or grease. If oil or grease is found – do not use regulator! 4 inspect torch connections for damaged or missing “O” rings. 7 1 Read Stand Always operating instructions carefully before using equipment. A guide to safe operation is included in all Victor outfits. to the side when opening the cylinder valve. Always open the valve slowly and carefully. 5 purge the system before lighting the torch. Use tip charts when setting operating pressure. 8 2 Always Always Wear keep cylinders securely chained. Keep valve caps on when not in use. This is where the FBA is use flashback arrestors and reverse flow check valves when operating gas equipment. protective clothing. Insure proper ventilation. Always keep sparks away from combustibles. The check valve is located inside this fitting
STATEMENT OF WARRANTY LIMITED WARRANTY: THERMADYNE warrants that its products will be free of defects in workmanship or material. Should any failure to conform to this warranty appear within the time period applicable to the THERMADYNE products as stated below, THERMADYNE shall, upon written notification thereof and substantiation that the product has been stored, installed, operated, and maintained in accordance with THERMADYNE’s specifications, instructions, recommendations and recognized standard industry practice, and not been subject to misuse, repair, neglect, alteration, or accident, correct such defects by suitable repair or replacement, at THERMADYNE’s sole option, of any components or parts of the product determined by THERMADYNE to be defective. THIS WARRANTY IS EXCLUSIVE AND IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. LIMITATION OF LIABILITY: THERMADYNE shall not under any circumstances be liable for special, indirect or consequential damages, such as, but not limited to, damage or loss of purchased or replacement goods, business interruption or loss of profit, or claims of customers of distributor (hereinafter the “Purchaser”) for service interruption. The remedies of the Purchaser set forth herein are exclusive and the liability of THERMADYNE with respect to any contract, or anything done in connection therewith such as the performance or breach thereof, or from the manufacture, sale, delivery, resale, or use of any goods covered by or furnished by THERMADYNE whether arising out of contract, negligence, strict tort, or under any warranty, or otherwise, shall not, except as expressly provided herein, exceed the price of the goods upon which such liability is based. THIS WARRANTY BECOMES INVALID IF REPLACEMENT PARTS OR ACCESSORIES ARE USED WHICH MAY IMPAIR THE SAFETY OR PERFORMANCE OF ANY THERMADYNE PRODUCT. THIS WARRANTY IS INVALID IF THE PRODUCT IS SOLD BY NON-AUTHORIZED PERSONS. This warranty is effective for the time stated in the Warranty Schedule beginning on the date that the authorized distributor delivers the products to the Purchaser. Warranty repairs or replacement claims under this limited warranty must be submitted by an authorized THERMADYNE repair facility within thirty (30) days of the repair. No transportation costs of any kind will be paid under this warranty. Transportation charges to send products to an authorized warranty repair facility shall be the responsibility of the Purchaser. All returned goods shall be at the Purchaser’s risk and expense. This warranty supersedes all previous THERMADYNE warranties. WARRANTY SCHEDULE The warranty is effective below for the time stated in the Warranty Schedule beginning on the date that the authorized distributor delivers the products to the purchaser. THERMADYNE reserves the right to request documented evidence of date of purchase. GAS WELDING AND CUTTING EQUIPMENT Parts / Labor Victor ® Professional Victor CutSkill ® Victor FirePower ® Cutting Machine Motors Parts Used in Rental Applications 1 year from date sold by seller to authorized distributor Victor Limited Warranty 135
Page 1 and 2:
Industrial Gas Equipment Catalog vi
Page 3 and 4:
Outfits Victor Professional .......
Page 5 and 6:
WEDLING, CUTTING AND HEATING GUIDE
Page 7 and 8:
Heavy Duty Cutter Select ST 1000 FC
Page 9 and 10:
400 600 200 kPa 800 psi USE NO Feat
Page 11 and 12:
400 200 600 kPa p si 800 1000 80 60
Page 13 and 14:
Fire-Stick TORCH KIT
Page 15 and 16:
Delivery Pressure LB. per SQ. IN. O
Page 17 and 18:
Flowgauges Model Stage Duty Type Fe
Page 19 and 20:
How to read the Flow Data Charts on
Page 21 and 22:
SR 350/Single Stage - Medium Duty F
Page 23 and 24:
SR 4 High Pressure Piston Regulator
Page 25 and 26:
50 100 10 kPa 15 5 Gas Service Mode
Page 27 and 28:
Gas Service Model No. Oxygen Acetyl
Page 29 and 30:
Gas Service Model No. Oxygen, CO2,
Page 31 and 32:
Model No. Delivery Range CGA Inlet
Page 33 and 34:
Gas Service Model No. Air, Oxygen,
Page 35 and 36:
SAMPLE ORDERING INFORMATION Model N
Page 37 and 38:
Gas Service Model No. Part No. Argo
Page 39 and 40:
Model No. CGA Inlet Connection HSR
Page 41 and 42:
Gas Service Model No. Oxygen Inert
Page 43 and 44:
Gas Service Model No. Delivery Rang
Page 45 and 46:
Gas Service Model No. Oxygen Inert
Page 47 and 48:
Page 49 and 50:
Page 51 and 52:
SAMPLE ORDERING INFORMATION Model N
Page 53 and 54:
400 200 Part No. Model No. Descript
Page 55 and 56:
Part No. Model No. 0781-2723 0387-0
Page 57 and 58:
Part No. Model No. 0781-9171 0781-9
Page 59 and 60:
FOR BEST PERFORMANCE, USE THE FOLLO
Page 61 and 62:
Handles Medium Duty 100 FC Victo
Page 63 and 64:
Part No. Model No. Cutting Range Ti
Page 65 and 66:
Part No. Model No. Cutting Range Ti
Page 67 and 68:
The high capacity straight torches
Page 69 and 70:
The HC 1400 Series is a two hose de
Page 71 and 72:
Victor Heavy Industry Metal Cutting
Page 73 and 74:
FOR USE WITH NATURAL GAS, PROPANE C
Page 75 and 76:
Part No. Model No. 0381-1620 0381-1
Page 77 and 78:
Victor Machine Torches They are ava
Page 79 and 80:
Victor Professional MT 1065 (Three
Page 81 and 82:
Victor Professional Model BHA 2 Mod
Page 83 and 84: Heavy Duty Equipment User Guide Med
Page 85 and 86: Tip Size 2 4 6 8 10 Approximate Gro
Page 87 and 88: Flame orifice size the same for all
Page 89 and 90: Size Part No. Length Fuel Gas Usage
Page 91 and 92: Heating Nozzles Victor Professional
Page 93 and 94: Model Size W W-1 W-J 000 00 0 1 2 3
Page 95 and 96: RTEN Welding Nozzles
Page 97 and 98: TIP ENDS INFORMATION Type Applicati
Page 99 and 100: Propylene The information shown on
Page 101 and 102: Acetylene Propylene The information
Page 103 and 104: Metal Thickness Met
Page 105 and 106: TYPE 101 Series 1 Series 3 Size Box
Page 107 and 108: Series 1 TYPE GPP torch cutt
Page 109 and 110: Series 1 TYPE 244 Size Par
Page 111 and 112: Series 1 TYPE 101 Series 1
Page 113 and 114: Series 1 TYPE GPP Series
Page 115 and 116: Series 3 TYPE 101 Series 3
Page 117 and 118: SMITH ® Cutting Tips Standard Cutt
Page 119 and 120: Harris ® - Style TYPE 6290
Page 121 and 122: Flamebuster Flashback Arrestors Fl
Page 123 and 124: FB-O Torch Mount FB-OR Regulator Mo
Page 125 and 126: KWIK-CONNECT TORCH/HOSE CONNECTIONS
Page 127 and 128: Victor Professional Typical Install
Page 129 and 130: CGA 326 NITROUS OXIDE Part No. Desc
Page 131 and 132: CGA 590 AIR Part No. Description 09
Page 133: CGA 024 STATION OXYGEN Part No. Des
show all

Regulators - Victor Technologies

Create successful ePaper yourself

Delete template?

Save as template?