Netgear ProSafe VPN firewall (FVS318 or FVM318) - VPN Case ...

More documents

Recommendations

Info

unchanged.
6. Choose protect under Action. Under Firewall Side Host/Network, choose IP Address, choose inside as Interface, enter 192.168.1.0 as IP address and 255.255.255.0 as Mask. Under Remote Side Host/Network, choose IP Address, choose outside as Interface, enter 192.168.0.0 as IP address and 255.255.255.0 as Mask. Under Protocol and Service, choose IP and any as IP protocol. Check the box Exempt PIX side host/network from address translation. In the description box, enter a description for this IPSec rule. Click OK. 7. When ask to Add host/network, Click OK.
Page 1 and 2: Netgear ProSafe VPN firewall (FVS31
Page 3 and 4: There are three methods of creating
Page 5 and 6: Under General information, highligh
Page 7 and 8: Click Apply.
Page 9: 5. Click on the New button next to
Page 13 and 14: 10. Click Finish to finish creating
Page 15 and 16: From VPN wizard in the PDM (choose
Page 17 and 18: 2. Enter 66.126.237.201 as Peer IP
Page 19 and 20: 4. Select 3DES as Encryption algori
Page 21: 6. Select IP Address. Select outsid
Page 24: . Troubleshooting

Netgear ProSafe VPN firewall (FVS318 or FVM318) - VPN Case ...

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?