You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
GB<br />
3 INTRODUCTION<br />
A10 - <strong>MEK</strong> <strong>25</strong> is an intermediate wire feed unit for MIG/MAG--welding where the<br />
electrode is fed forward according to <strong>ESAB</strong>:’s A10--system<br />
By connecting an extension cable between the intermediate wire feed unit and the<br />
wire feed unit on the power source the working radius can be increased by up to<br />
<strong>25</strong> m.<br />
On <strong>MEK</strong> <strong>25</strong> the wire feed speed and the voltage can be controlled using<br />
potentiometers or a remote control unit can be connected.<br />
The drive motor is of a permanent--magnetic design and is integrated with a worm<br />
gear. The motor is fed with 24 V DC voltage.<br />
<strong>MEK</strong> <strong>25</strong> is equipped with a heavy--duty crash bar and runners to facilitate transport.<br />
The extensive range combined with the performance of the power source provides<br />
you with a flexible total solution.<br />
3.1 TECHNICAL DATA<br />
Control voltage 42V AC<br />
Voltage 0--24V DC<br />
Wire feed speed 1--18m/min<br />
Feed roller hollow wire 1,0--1,2 R / 1,4--1,6 R<br />
Feed roller solid wire 1,0--1,2<br />
Enclosure class IP 23<br />
Weight 7,5 kg<br />
Continuous A--weighted noise level 58 dB<br />
Enclosure class<br />
The IP code indicates the enclosure class, i. e. the degree of protection against penetration by solid<br />
objects or water. Equipment marked IP 23 is designed for indoor and outdoor use.<br />
bm16d12e<br />
- 33 -
Change language