European Technical Approval ETA-09/0105 - ETA-Danmark
European Technical Approval ETA-09/0105 - ETA-Danmark
European Technical Approval ETA-09/0105 - ETA-Danmark
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Page 4 of 12 of <strong>European</strong> <strong>Technical</strong> <strong>Approval</strong> no. <strong>ETA</strong>-<strong>09</strong>/<strong>0105</strong><br />
2 Characteristics of product and assessment<br />
<strong>ETA</strong>G<br />
paragraph<br />
6.1.1<br />
6.1.2<br />
6.1.3<br />
6.2.1<br />
6.3.1<br />
6.7.1<br />
6.7.2<br />
6.7.3<br />
Characteristic<br />
2.1 Mechanical resistance and stability*)<br />
Characteristic load-carrying capacity<br />
Stiffness<br />
Ductility in cyclic testing<br />
2.2 Safety in case of fire<br />
Reaction to fire<br />
2.3 Hygiene, health and the environment<br />
Influence on air quality<br />
2.4 Safety in use<br />
2.5 Protection against noise<br />
2.6 Energy economy and heat retention<br />
2.7 Related aspects of serviceability<br />
Durability<br />
Serviceability<br />
Identification<br />
Assessment of characteristic<br />
See Annex B<br />
No performance determined<br />
No performance determined<br />
The concealed beam hangers are made from<br />
steel classified as Euroclass A1 in accordance<br />
with EN 1350-1 and EC decision 96/603/EC,<br />
amended by EC Decision 2000/605/EC<br />
No dangerous materials **)<br />
Not relevant<br />
Not relevant<br />
Not relevant<br />
The concealed beam hangers have been assessed<br />
as having satisfactory durability and<br />
serviceability when used in timber structures<br />
using the timber species described in Eurocode 5<br />
and subject to the conditions defined by service<br />
class 1 and 2<br />
See Annex A<br />
*) See page 5 of this <strong>ETA</strong><br />
**) In accordance with http://europa.eu.int-/comm/enterprise/construction/internal/dangsub/dangmain.htm In addition to the specific clauses relating to dangerous<br />
substances contained in this <strong>European</strong> <strong>Technical</strong> <strong>Approval</strong>, there may be other requirements applicable to the products falling within its scope (e.g. transposed <strong>European</strong><br />
legislation and national laws, regulations and administrative provisions). In order to meet the provisions of the EU Construction Products Directive, these requirements need<br />
also to be complied with, when and where they apply.