6. - Fagor Automation
6. - Fagor Automation
6. - Fagor Automation
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Drive. CT series<br />
4.<br />
CT<br />
Ref.1109<br />
38<br />
Specific brackets<br />
The following figure shows the surface mounting brackets for the SPMC1402 rectifier.<br />
1. Common mounting bracket of the SPM unit: make sure that the short section is fixed to the rear<br />
plate.<br />
2. Power grounding clamp for the SPMC1402 rectifier: mounting the clamp requires 20 M10<br />
screws 40 mm long (1.575 inch) with vibration proof washers. Tightening torque 15 N·m (11.1<br />
lb ft).<br />
3. Power grounding clamp for the SPMC1402 rectifier motor.<br />
4. SPMC1402 rectifier surface mounting bracket: mounting the bracket requires M8 screws 20<br />
mm long (0.787 inch) with vibration proof washers. Tightening torque 9 Nm (6,6 lb ft).<br />
The following figure shows the through-panel mounting brackets for the SPMC1402 rectifier.<br />
1. Common mounting bracket of the SPM unit: make sure that the short section is fixed to the<br />
rear plate.<br />
2. Power grounding clamp for the SPMC1402 rectifier: mounting the clamp requires 20 M10<br />
screws 40 mm long (1.575 inch) with vibration proof washers. Tightening torque 15 Nm (11.1<br />
lb ft).<br />
3. Power grounding clamp for the SPMC1402 rectifier motor.