LiquiGlas Flyer - CCM

6
LIQUIGLAS ®
Wood For
protecting natural
wood against moisture,
mould, soiling abrasion,
and bacteria. Ideal for use on
Saunas, doors, art works, garden
furniture, tables, toys and much
more. LIQUIGLAS ® Wood is a water
based coating which provides an undetectable,
flexible and breathable glass coating which can
be applied in seconds to clean stable wooden
surfaces. It can be applied to moist wood but it is
not suitable for oily wood such as teak.
Application:
Spray LIQUIGLAS ® Wood on to the surface
from a distance of approximately 25cm. To
achieve optimal preservation of wood, conduct
2-3 spraying passes (wet on wet). Ensure that
the whole surface is fully moistened. The coated
item can be handled when the surface is dry. Full
curing takes approximately 24hrs at an ambient
temperature of 20°C.
NOTE:
Please note that some wood will continue to
dry and or swell even after the application of
the coating. The manufacturer accepts no liability
for any deformation or adverse performance
characteristics of the coated wood. The coating
is heat tolerant (tolerant to temperatures in the
rage -150 to +450°C) but it is important to note
that the underlying wood may react to hot items
which are placed on the surface.
Keep out of reach of children. Do not spray into
eyes. Do not drink. If swallowed, seek medical
advice immediately and show this container and
label. Do not inhale atomized spray. Please use
content within 6 months of opening.
Coverage: Up to 10m², depending on
the surface area and absorbency of the wood.
LIQUIGLAS ®
Stone provides an
invisible breathable
glass layer which
protects against staining
and weathering. Ideal for
natural-stone, concrete, grout,
bricks, terracotta, clay tiles etc.
LIQUIGLAS ® Stone is ready to use and can
be sprayed directly on to the surface.
Coverage: Up to 10 m 2 , depending on the
porosity and surface area of the stone.
Application: The surface must be completely
clean and stable. The application is very
simple. Spray the surface from a distance of
approximately 25 cm ensuring that the surface is
evenly moistened. (2 to 3 passes ensuring “wet
on wet” coverage is recommended.) If pooling
occurs simply wipe the surface to disperse
the liquid. The coating becomes fully cured
after 24hrs; when the ambient temperature
is approximately 20°C. Warm air drying can
be used. The coating can be used lightly when
the surface is touch dry. The coating can be
applied to moist stone. Do not apply when the
temperature is going to drop below 5°C within
the next 24hrs. The coating is highly durable but
abrasion will occur on floors or contact areas.
To re apply to these areas-Thoroughly clean
the surface and then re apply. If necessary wipe
over the re treated area to disperse any liquid
which beads on the surface. Cleaning the coated
surface. In most instances the surface can be
cleaned with warm water and a soft brush. Low
pressure power washers (max 60 bar) can be
used. For glazed tiles please use LIQUIGLAS ®
Glass and Ceramic.
Keep out of the reach of children. Do not drink
the liquid. If swallowed, seek medical advice
immediately and show this container and label.
Do not spray directly on to skin or in the eyes.
Do not inhale. Use the contents within 6 months
of opening. Protect the bottled liquid from frost.
WOOD
PROTECTION
WWW.LIQUI-GLAS.COM
430
STONE
PROTECTION
WWW.LIQUI-GLAS.COM
420
HOLZ
Durch LiquiGlas® HOLZ erhalten unbehandelte Naturhölzer
wie z.B. Gartenmöbel aus Holz, Kinderspielzeug oder
Saunaflächen einen wasser- und schmutzabweisenden UVstabilen
Oberflächenschutz. Nicht geeignet zur Versiegelung
von ölendem Holz wie z.B. Teak.
Art. Nr. 430
250ml (für bis zu 10m²)
+ Gebrauchsanleitung
EAN Code 4260168444306
STEIN
Mit LiquiGlas® STEIN erhalten sämtliche porösen
Untergründe einen langlebigen Witterungsschutz, z. B.
Sandsteine, Naturwerksteine, Betonsteine, Terrakotta,
Tonziegeln uvm.
Art. Nr. 420
250ml (für bis zu 10m²)
+ Gebrauchsanleitung
EAN Code 4260168444207
EDELSTAHL / ALUMINIUM
LiquiGlas® EDELSTAHL ist ein anwendungsfertiges Produkt,
das für Oberflächen aus Edelstahl im Küchenbereich, wie z.B.
Dunstabzugshauben, Are surfaces coated with optimiert LIQUIGLAS ist. Erleichtert die Reinigung
® self cleaning?
welcome to the world of SiO 2 Liquid Glass, nano layering technology. The product which you have
before you offers truly stunning characteristics.
Frequently asked questions:
So what does Nano mean?
A nanometer is a unit of measurement.1nm (nanometer) is one billionth of a metre.The name
“Nano” comes from the Greek “Nanos” which means dwarf.
Does our liquid glass contain any potentially harmful “nano” particles?
No. Our coatings are recognised as being particle free. Our technology is based on molecular SiO , 2
which is created via an adaptation of the Sol-Gel process.
No, we offer“easy clean” technology. LIQUIGLAS ® has non-stick characteristics; similar to pans
which are coated with non stick coatings.
How long will the protection last?
von Verschmutzungen Every environment is different und as some living spaces Wasserflecken.
encounter heavy usage whilst others encoun-
ter far less “wear and tear.” The treatments are all very durable and they will last for many months
or even years. we expect the hard surface coatings to last for at least 6 months in domestic
environments.
why can´t you see our treatment?
Our thinnest coatings are approximately 100nm thick. This means that they are approximately
500 times thinner than the a human hair and you need to use an electron microscope to see the
coatings.
So what exactly does the product contain?
This truly amazing product contains pure, particle free, SiO (Silicon Dioxide) which means that it
2
contains “pure glass”. The glass is in a molecular form and is held in a liquid; it does not become
“glass” until it is allowed to dry. The glass in windows is not pure!
So how does the nano coating work and what are the benefits?
The liquid glass coating is a highly durable, flexible, super Art. smooth, breathable Nr. and Super 470 Phobic
coating (=repels oil , water, and dry soiling). Dry dirt will not stick to treated surface. Most
significantly, almost all treated surfaces can be cleaned with water alone. This means that in most
instances environmentally damaging cleaning chemicals are not needed.
When is the surface sufficiently coated? Set, Inhalt:
After applying the coating to the surface ensure that the whole of the surface is coated by working
across the area. work quickly and in in a methodical manner. Over application results in a visble
deposit which can be buffed off. 3 Vorreinigungstücher 100 x 140mm
How do I clean brushed stainless steel?
Brushed stainless steel is often used for oven hoods, oven hobs and microwaves. During the
manufacturing process a thin oily deposit is often left in place. Thorough cleaning is required in
order to remove this coating. A micro-fibre cloth and 3 a suitable Veredelungstücher detergent can be used prior to 100 x 140mm
deep cleaning with the LIQUIGLAS
(je Tuch für bis zu 1m²)
+ Gebrauchsanleitung
EAN Code 4260168444702
www.LIQUI-GLAS.COM
® cleaning wipe.
Does the coating prevent the appearance of finger prints?
The LIQUIGLAS ® coatings will not prevent finger prints from appearing on a surface but the finger
prints are easily removed with a micro-fibre and warm water.
Do I need to wipe the surface with a dry cloth after cleaning?
To attain an “as good as new” appearance it is advisable wipe the surface with a dry cloth as this
will remove water marks.
Should I use a scourer to clean coated surfaces?
Scouring agents and scouring pads will remove the coating.
Should I use warm water or cold water to clean the surface?
Cold water can be used but warm water will enhance the removal of fats and cooking deposits. It
is advisable to let the water soften baked on cooking deposits before cleaning the surface.
Is the coating suitable for all aluminium and stainless steel?
It is important to note that occasionally aluminium is coated with a lacquer and so bonding to
such surfaces may be less efficient (the LIQUIGLAS ® The beading effect has disappeared or become weaker - why?
Either the coating has worn away after prolonged use or the surface needs to be cleaned in order
to re expose the surface. wiping with pre cleaner or an alcohol cleaner will also rejuvenate the
coating.
StainleSS Steel /
Can the treatments be re applied?
Re application follows the format used during the initial application process; simply make sure that
the surface is completely clean , dry and free of contaminants such as washing powder residue, or
detergents. Please read the section relating to “application”.
aluminium
Are the LIQUIGLAS
Protection
Suitable for coating stainless steel and aluminium in most environments.
Plastic, art. no. 447 should be used for these
surfaces). Some stainless steel is highly polished. Optimal bonding to such surfaces can also be
difficult to attain.
® coatings “food safe”?
All of our coatings have been tested by independent agencies and are food safe.
Are the LIQUIGLAS ® coatings Dermatologically tested?
All of our products are subjected to dermatological testing.
Are the LIQUIGLAS ® coatings heat tolerant?
Liquid glass is stable between -150°C and +450°C.
Can I apply LIQUIGLAS ® to any surface?
Liquid Glass bonds to most surfaces via quantum forces. The coatings can’t be applied to oily
woods, hybrid stone mixtures or non stick surfaces. There are no glues, resins or other chemicals
within this product.
Are LIQUIGLAS ® products environmentally friendly?
Our technology is recognised as being of great significance in the battle to protect our planet.
The technology has won several awards from leading “environmental” agencies.
It should be remembered that in most instances treated surfaces can be cleaned with water alone
this means that a vast amount of POPs (Persistent Organic Pollutants) such as detergents can be
withdrawn from sale.
Please share your experience with the team at LIQUIGLAS ® . If you have tested a new application
and found it good, we may publish it on our website. we will be pleased to forward a sample items
of a new QLG coating to any person who has their comments published on our web page. For
contents:
more information, visit www.liqui-glas.com
3 pre-cleaning wipes 100 x 140mm
3 treatment wipes 100 x 140mm (2 m² per wipe)
470
Contents:
2 pre-cleaning wipes 160 x 220 mm
2 treatment wipes 160 x 220 mm
(1 wipe is sufficient for 2 baking sheets
or for the interior surfaces of the oven)
WWW.LIQUI-GLAS.COM
450
How LIQUI-
GLAS ® works.
Under a microscope most
surfaces are very rough and
look like mountain ranges. Dirt
and bacteria normally cling to these
surfaces. Traditional cleaners, which are
often environmentally damaging, fail to fully
remove the dirt or they apply a coating on top
of the dirt which makes the surface look clean.
LIQUIGLAS ® coats
these “mountains” with
pure, nano scale particle
free glass, which is 500
times thinner than a
human hair. The newly
coated surface is superphobic
and so rejects
soiling agents. Amazingly
this coating is breathable, flexible yet super
durable. The coating is environmentally friendly
as it is created from quartz sand. Additionally
the coatings can be cleaned with water which
reduces the use of harmful chemicals.Your cleaning
costs are also reduced!
weatherproof
easy application
Hydrophobic (water
repellent)
dirt and moisture
repellant
food safe
environmentally neutral
breathable and flexible
physiologically neutral
highly durable
undetectable
reduces use of cleaning
chemicals
Quality tested by leading
German research
organisations
multi award winning
technology
Made in Germany
ADVANCED LIQUID GLAS TECHNOLOGY
A.L.G.T. ®
How LIQUI-
GLAS ® works.
Under a microscope most
surfaces are very rough and
look like mountain ranges. Dirt
and bacteria normally cling to these
surfaces. Traditional cleaners, which are
often environmentally damaging, fail to fully
remove the dirt or they apply a coating on top
of the dirt which makes the surface look clean.
LIQUIGLAS ® coats these
“mountains” with pure,
nano scale particle free
glass, which is 500 times
thinner than a human hair.
The newly coated surface
is super-phobic and so
rejects soiling agents.
Amazingly this coating is
breathable, flexible yet super durable. The coating
is environmentally friendly as it is created
from quartz sand. Additionally the coatings can
be cleaned with water which reduces the use
of harmful chemicals.Your cleaning costs are
also reduced!
easy application
dirt and moisture
repellant
food safe
environmentally neutral
breathable and flexible
physiologically neutral
highly durable
undetectable
temperature resistant
-150°C to +450°C
reduces use of cleaning
chemicals
Quality tested by leading
German research
organisations
multi award winning
technology
Made in Germany
OVEN / BARBECUE
PROTECTION
Ideal for use on oven, grill and baking tin surfaces.
ADVANCED LIQUID GLAS TECHNOLOGY
A.L.G.T. ®
Welcome to the world of SiO Liquid Glass, nano layering technology. The product which
2
you have before you offers truly stunning characteristics.
Frequently asked questions:
So what does Nano mean?
A nanometer is a unit of measurement.1nm (nanometer) is one billionth of a metre. The
name “Nano” comes from the Greek “Nanos” which means dwarf.
Does our liquid glass contain any potentially harmful “nano” particles?
No. Our coatings are recognised as being particle free. Our technology is based on
molecular SiO , which is created via an adaptation of the Sol-Gel process.
2
Why can´t you see our treatment?
Our thinnest coatings are approximately 100nm thick. This means that they are approximately
500 times thinner than the a human hair and you need to use an electron
microscope to see the coatings.
So what exactly does the product contain?
This truly amazing product contains pure, particle free, SiO (Silicon Dioxide) which means
2
that it contains “pure glass”. The glass is in a molecular form and is held in a liquid; it does
not become “glass” until it is allowed to dry. The glass in windows is not pure!
So how does the nano coating work and what are the benefi ts?
The liquid glass coating is a highly durable, fl exible, super smooth, breathable and Super
Phobic coating (=repels oil , water, and dry soiling). Dry dirt will not stick to treated
surface as each fi lament of every fi bre is protected with a nano scale layer of glass. Most
signifi cantly, almost all treated surfaces can be cleaned with water alone. This means that in
most instances environmentally damaging cleaning chemicals are not needed.
When is the surface suffi ciently coated?
After applying the coating to the surface ensure that the whole of the surface is coated
by working across the area.Work quickly and in in a methodical manner. Over application
results in a visble deposit which can be buffed off.
Can I apply LIQUIGLAS ® to my micro-wave?
The coating can be applied to microwave surfaces.
Can I use the oven treatment on Ceran hobs?
Yes, but LIQUIGLAS ® Glass and Ceramics (art. no. 401 & 405) offers the best bond to
Ceran surfaces.
If I treat my baking tray will particles of the liquid transfer into my food?
The coating conforms to food safety regulations EU-VO 1935 / 2004
Can I treat my deep fryer?
The coating can be used but the unit should be cleaned after use.
Can the coating be used on self cleaning ovens?
Some self cleaning ovens work at temperatures which exceed the 450°C working
temperature of LIQUIGLAS ® .Please check manufacturers instructions. Most ovens have a
maximum working temperature of approximately 300°C.
Do I need to clean the oven on a regular basis?
When possible you are advised to clean the oven after use as this will prevent build up and
“bake-on” of cooking spills. This will make cleaning quicker and easier.
OFEN / GRILL
LiquiGlas® BACKOFEN UND GRILL verhindert das
Einbrennen von Speiseresten im Backofen und Grill, an
Kuchenformen etc. Leichtes und müheloses Reinigen z. B. der
How do I clean my oven?
In most instances you can use warm water and a microfi bre to clean the oven.
The surface may need to be wiped over several times to moisten the food deposits.
Backofenoberfläche.
Non abrasive cleaning products can be used to assist with the removal of very stubborn
baked on fat deposits.
Should I use scouring pads?
The use of scouring pads will dramatically reduce the life of the coating.
Are surfaces coated with LIQUIGLAS ® self cleaning?
No, we offer “easy clean” technology. LIQUIGLAS ® has non-stick characteristics; similar to
pans which are coated with non stick coatings.
How long will the protection last?
Every environment is different as some living spaces encounter heavy usage whilst others
encounter far less “wear and tear.” The treatments are all very durable and they will last
for many months or even years. We expect the hard surface coatings to last for at least 6
months in domestic environments.
The beading effect has disappeared or become weaker - why?
Either the coating has worn away after prolonged use or the surface needs to be cleaned
in order to re expose the surface. Wiping with pre cleaner or an alcohol cleaner will also
rejuvenate the coating.
Are the LIQUIGLAS ® coatings “food safe”?
Art. Nr. 450
Set, Inhalt:
2 Vorreinigungstücher All of our coatings have been 160 tested by independent x 220mm
agencies and are food safe.
Are the LIQUIGLAS
2 Veredelungstücher 160 x 220mm
(ein Tuch ist ausreichend für ein Backblech
oder den Backofeninnenraum eines haushaltsüblichen Ofens)
+ Gebrauchsanleitung
EAN Code 4260168444504
® coatings dermatologically tested?
All of our products are subjected to dermatological testing.
Are the LIQUIGLAS ® coatings heat tolerant?
Liquid glass is stable between -150°C and +450°C.
Can I apply LIQUIGLAS ® to any surface?
Liquid Glass bonds to most surfaces via quantum forces. The coatings can’t be applied to
oily woods, hybrid stone mixtures or non stick surfaces. There are no glues, resins or other
chemicals within this product.
Are LIQUIGLAS ® products environmentally friendly?
Our technology is recognised as being of great signifi cance in the battle to protect our
planet.
The technology has won several awards from leading “environmental” agencies.
It should be remembered that in most instances treated surfaces can be cleaned with
water alone this means that a vast amount of POPs (Persistent Organic Pollutants) such as
detergents can be withdrawn from sale.
Can calcium deposits be removed more easily from a surface coated with LIQUIGLAS ® ?
Laboratory tests show that calcium deposits can be removed from a coated glass plate with
one fi fth of the energy normally needed to remove scale from an uncoated sample. Warm
water should be applied to the deposits before wiping them off.
Please share your experience with the team at LIQUIGLAS ® . If you have tested a new application
and found it good, we may publish it on our website. We will be pleased to forward
a sample items of a new QLG coating to any person who has their comments published on
our web page. For more information, visit www.liqui-glas.com
WOOD
The LiquiGlas® WOOD coating is for untreated „natural“
wood, e.g. natural wooden garden furniture, toys, sauna areas,
ornamental items. Not suitable for coating oily wood such as
teak.
Art. No. 430
250ml (for up to 10m²)
+ user instructions
EAN Code 4260168444306
STONE
The LiquiGlas® STONE coating protects stone surfaces with
a super durable, breathable and undetectable glass coating
.This easy to apply coating protects against soiling, moisture,
abrasion, algae and the negative effects of weathering.
Art. No. 420
250ml (for up to 10m²)
+ user instructions
EAN Code 4260168444207
STAINLESS STEEL / ALUMINIUM
LiquiGlas® STAINLESS STEEL is a product
optimized for application on stainless steel and aluminium
surfaces.
Easy-to-clean surfaces are created in minutes. This coating
makes the removal of dirt, fi nger marks and water stains very
straight forward.
Art. No. 470
Kit, content:
3 pre-cleaning wipes 100 x 140mm
3 treatment wipes 100 x 140mm
(coverage for up to 1m²)
+ user instructions
EAN Code 4260168444702
OVEN / BARBECUE
LiquiGlas® OVEN AND BARBECUE prevents food particles
from becoming fully bonded to oven, grill and baking tin
surfaces etc., creates an easy-to-clean surface. Coated surfaces
can be cleaned with water alone, stainless steel surfaces retain
an “as good as new “ appearance.
Art. No. 450
Kit, content:
2 pre-cleaning wipes 160 x 220mm
2 treatment wipes 160 x 220mm
(1 wipe is sufficient for 2 baking sheets
or for the interior surfaces of a small oven)
+ user instructions
EAN Code 4260168444504