LiquiGlas Flyer - CCM

FLÜSSIGGLAS-VERSIEGELUNG 

FÜR HAUSHALT UND AUTO 

LIQUID GLASS TREATMENTS 

FOR HOUSEHOLD AND CAR 

GLASS / CERAMICS 

PROTECTION 

Ideal for coating …. 

Windows - bath tubs - shower screens, 

mirrors - tiles - windscreens, wash basins etc. 

A.L.G.T. ® 

ADVANCED LIQUID GLAS TECHNOLOGY 

Contents: 

125 ml pre-cleaner 

50ml treatment 

5 dry wipes 

WWW.LIQUI-GLAS.COM 

CCM GmbH Creative Chemical Manufacturers 

Diepenbroich 8 · D-51491 Overath 

Fon +49 (0) 2206 / 938590-0 · Fax +49 (0) 2206 / 938590-99 

info@quantumliquiglas.com · www.quantumliquiglas.com 

Made in Germany 

Product features: 

Easy to use 

Dirt-repelling 

Hydrophobic (repels water) 

Environmentally neutral 

No negative impact on visual appearance 

Long-lasting 

Anti-microbial 

Economical 

Multi award winning technology (including internationally 

recognized environmental award) 

per m² is an approximate coverage rate) After 2 minutes finish the application by gently 

buffing the surface for a few seconds. The surface is now coated with a dirt-repelling and 

UV-stable protection. 

Warning: Flammable. Keep out of reach of children. Keep away from sources of 

ignition - No smoking. In case of contact with eyes, rinse immediately with plenty 

of water and seek medical advice. If swallowed, seek medical advice immediately 

and show this container or label. 

StainleSS Steel / 

aluminium 

Protection 

Suitable for coating stainless steel and aluminium in most Shoe can environments. 

be 

www.LIQUI-GLAS.COM 

LIQUIGLAS ® 

used to protect 

leather, suede and 

fabric footwear. 

By applying LIQUIGLAS 

contents: 

3 pre-cleaning wipes 100 x 140mm 

3 treatment wipes 100 x 140mm (2 m² per wipe) 

® 

Shoe on to the surface of your 

footwear you will be protecting the 

surface with a undetectable, super durable, 

stain repelling layer of pure nano scale 

glass. Ideal for use on training shoes, fabric 

basket ball shoes, suede shoes, non coated/ 

polished leather, handbags etc. The multi 

award winning technology is easy to apply. 

Firstly ensure that the surface is completely 

clean as the coating will not adhere to 

any form of dirt, or grease. The coating 

can be applied to moist fabrics. Spray the 

coating on to the surface from a distance 

of approximately 25cm ensuring that the 

surface is fully coated and moistened. Two 

spraying passes is normally sufficient. Wipe 

over the surface with a gloved hand, if over 

application causes pooling on the surface. 

This action will disperse the liquid. The 

coating becomes fully bonded after drying 

for 24hrs at room temperature. Warm air 

drying can be used. 

Cleaning: Coated items should be cleaned 

welcome to the world of SiO Liquid Glass, nano layering technology. The product which you have 

2 

before you offers truly stunning characteristics. 

Frequently asked questions: 

So what does Nano mean? 

A nanometer is a unit of measurement.1nm (nanometer) is one billionth of a metre.The name 

“Nano” comes from the Greek “Nanos” which means dwarf. 

Does our liquid glass contain any potentially harmful “nano” particles? 

No. Our coatings are recognised as being particle free. Our technology is based on molecular SiO , 2 

which is created via an adaptation of the Sol-Gel process. 

why can´t you see our treatment? 

Our thinnest coatings are approximately 100nm thick. This means that they are approximately 

500 times thinner than the a human hair and you need to use an electron microscope to see the 

coatings. 

So what exactly does the product contain? 

This truly amazing product contains pure, particle free, SiO (Silicon Dioxide) which means that it 

2 

contains “pure glass”. The glass is in a molecular form and is held in a liquid; it does not become 

“glass” until it is allowed to dry. The glass in windows is not pure! 

So how does the nano coating work and what are the benefits? 

The liquid glass coating is a highly durable, flexible, super smooth, breathable and Super Phobic 

coating (=repels oil , water, and dry soiling). Dry dirt will not stick to treated surface. Most 

significantly, almost all treated surfaces can be cleaned with water alone. This means that in most 

instances environmentally damaging cleaning chemicals are not needed. 

When is the surface sufficiently coated? 

After applying the coating to the surface ensure that the whole of the surface is coated by working 

across the area. work quickly and in in a methodical manner. Over application results in a visble 

deposit which can be buffed off. 

How do I clean brushed stainless steel? 

Brushed stainless steel is often used for oven hoods, oven hobs and microwaves. During the 

manufacturing process a thin oily deposit is often left in place. Thorough cleaning is required in 

order to remove this coating. A micro-fibre cloth and a suitable detergent can be used prior to 

deep cleaning with the LIQUIGLAS ® cleaning wipe. 

Does the coating prevent the appearance of finger prints? 

The LIQUIGLAS ® coatings will not prevent finger prints from appearing on a surface but the finger 

prints are easily removed with a micro-fibre and warm water. 

Do I need to wipe the surface with a dry cloth after cleaning? 

To attain an “as good as new” appearance it is advisable wipe the surface with a dry cloth as this 

will remove water marks. 

Should I use a scourer to clean coated surfaces? 

Scouring agents and scouring pads will remove the coating. 

Should I use warm water or cold water to clean the surface? 

Cold water can be used but warm water will enhance the removal of fats and cooking deposits. It 

is advisable to let the water soften baked on cooking deposits before cleaning the surface. 

Is the coating suitable for all aluminium and stainless steel? 

It is important to note that occasionally aluminium is coated with a lacquer and so bonding to 

such surfaces may be less efficient (the LIQUIGLAS ® LIQUIGLAS 

Plastic, art. no. 447 should be used for these 

surfaces). Some stainless steel is highly polished. Optimal bonding to such surfaces can also be 

difficult to attain. 

® 

Textile and Leather 

treatment protects 

fabrics, suede and leather* 

with and undetectable layer of 

nano scale, particle free glass. The 

coating which is approximately 500 

times thinner than a human hair is flexible, 

breathable highly durable and anti microbial. It 

protects against dust, oil, grease, water and liquids 

such as tea and coffee. 

(*Some leathers and suede are protected with special 

oils or coating, as a result bonding of the Quantum 

LiquiGlas ® may be impaired. In all instances staining 

agents must be removed from suede and leather 

within 2-3 minutes. ) 

LIQUIGLAS ® Textile and Leather is ideal for use 

on upholstery, mattresses, suits, car seats, ties, 

outdoor wear, work wear etc. 

Application: To achieve a long lasting effect all 

surfaces must be completely clean, stable and free 

of any coatings such as conditioners or silicones. 

Firstly test for colour fastness on an area that will 

be hidden from view. 

To apply LIQUIGLAS ® Textile and Leather spray 

the surface from a distance of approximately 

25cms. Ensure that the fabric is evenly and fully 

moistened but not “soaking wet”. (2-3 spraying 

passes, “wet on wet”, is usually sufficient for a SHOE 

medium thickness fabric such as a tie or blouse. 

Thicker fabrics normally require further spraying 

passes.) Disperse any over-application of the 

PROTECTION 

liquid by wiping the surface with a gloved hand. 

The coating becomes fully functional after 24hrs. 

Warm air drying can be used. The coating can 

be ironed using a low temperature setting. Clean 

with warm water max 60°C. Sponging or soak 

washing is advised. 

Coverage: For up to 10 m², depending on the 

density and surface area of the fabric. 

Keep out of reach of children. Do not spray into 

the eyes, do not drink. If swallowed, seek medical 



Are surfaces coated with LIQUIGLAS ® self cleaning? 

No, we offer“easy clean” technology. LIQUIGLAS ® has non-stick characteristics; similar to pans 

which are coated with non stick coatings. 

How long will the protection last? 

Every environment is different as some living spaces encounter heavy usage whilst others encounter 

far less “wear and tear.” The treatments are all very durable and they will last for many months 

or even years. we expect the hard surface coatings to last for at least 6 months in domestic 

environments. 

The beading effect has disappeared or become weaker - why? 

Either the coating has worn away after prolonged use or the surface needs to be cleaned in order 

to re expose the surface. wiping with pre cleaner or an alcohol cleaner will also rejuvenate the 

coating. 

Can the treatments be re applied? 

Re application follows the format used during the initial application process; simply make sure that 

the surface is completely clean , dry and free of contaminants such as washing powder residue, or 

detergents. Please read the section relating to “application”. 

Are the LIQUIGLAS ® coatings “food safe”? 

All of our coatings have been tested by independent agencies and are food safe. 

Are the LIQUIGLAS ® coatings Dermatologically tested? 

All of our products are subjected to dermatological testing. 

Are the LIQUIGLAS ® coatings heat tolerant? 

Liquid glass is stable between -150°C and +450°C. 

Can I apply LIQUIGLAS ® to any surface? 

Liquid Glass bonds to most surfaces via quantum forces. The coatings can’t be applied to oily 

woods, hybrid stone mixtures or non stick surfaces. There are no glues, resins or other chemicals 

within this product. 

Are LIQUIGLAS ® products environmentally friendly? 

Our technology is recognised as being of great significance in the battle to protect our planet. 

The technology has won several awards from leading “environmental” agencies. 

It should be remembered that in most instances treated surfaces can be cleaned with water alone 

this means that a vast amount of POPs (Persistent Organic Pollutants) such as detergents can be 

withdrawn from sale. 

Please share your experience with the team at LIQUIGLAS ® advice 

immediately 

and show this 

container and label. 

Do not inhale atomized 

spray. Irrigate with water 

if splashed into the eyes. Seek 

medical guidance if any conditions 

persist. Use the contents of the bottle 

within 6 months of opening. Protect the 

bottled liquid from frost. 

How LIQUIGLAS 

. If you have tested a new application 

and found it good, we may publish it on our website. we will be pleased to forward a sample items 

of a new QLG coating to any person who has their comments published on our web page. For 

more information, visit www.liqui-glas.com 

® works. Under a microscope 

most surfaces are very rough and look like 

mountain ranges. Dirt and bacteria normally 

cling to these surfaces. Traditional cleaners, 

which are often environmentally damaging, fail 

to fully remove the dirt or they apply a coating 

on top of the dirt which makes the surface look 

clean. LIQUIGLAS ® LIQUIGLAS 

WOOD 

coats these “mountains” 

with pure, nano scale particle free glass, which is 

500 times thinner than a human hair. The newly 

coated surface is super-phobic and so rejects 

soiling agents. Amazingly this coating is breathable, 

flexible yet super durable. The coating is 

environmentally friendly as it is created from 

quartz sand. Additionally the coatings can be 

cleaned with water which reduces the use of 

harmful chemicals. Your cleaning costs are also 

reduced! 

easy application 

dirt and moisture 

repellant 

food safe 

environmentally neutral 

breathable and flexible 

physiologically neutral 

highly durable 

undetectable 

temperature resistant 

reduces use of cleaning 

chemicals 

Quality tested by leading 

German research 

organisations 

multi award winning 

technology 



® 

Wood For 

protecting natural 

wood against moisture, 

mould, soiling abrasion, 

and bacteria. Ideal for use on 

Saunas, doors, art works, garden 

furniture, tables, toys and much 

more. LIQUIGLAS ® Wood is a water 

based coating which provides an undetectable, 

flexible and breathable glass coating which can 

be applied in seconds to clean stable wooden 

surfaces. It can be applied to moist wood but it is 

not suitable for oily wood such as teak. 

Application: 

Spray LIQUIGLAS ® Wood on to the surface 

from a distance of approximately 25cm. To 

achieve optimal preservation of wood, conduct 

2-3 spraying passes (wet on wet). Ensure that 

the whole surface is fully moistened. The coated 

item can be handled when the surface is dry. Full 

curing takes approximately 24hrs at an ambient 

temperature of 20°C. 

NOTE: 

Please note that some wood will continue to 

dry and or swell even after the application of 

the coating. The manufacturer accepts no liability 

for any deformation or adverse performance 

characteristics of the coated wood. The coating 

is heat tolerant (tolerant to temperatures in the 

rage -150 to +450°C) but it is important to note 

that the underlying wood may react to hot items 

which are placed on the surface. 


eyes. Do not drink. If swallowed, seek medical 

advice immediately and show this container and 

label. Do not inhale atomized spray. Please use 

content within 6 months of opening. 

Coverage: Up to 10m², depending on 

the surface area and absorbency of the wood. 

TEXTILE & LEATHER 

PROTECTION 


PROTECTION 


A.L.G.T. ® 

How LIQ 

GLAS ® work 

Under a microsco 

surfaces are very rou 

look like mountain range 

and bacteria normally cling t 

surfaces. Traditional cleaners, wh 

often environmentally damaging, fail 

remove the dirt or they apply a coating o 

of the dirt which makes the surface look 

LIQUIGLAS ® co 

these “mountain 

pure, nano scale 

free glass, which 

times thinner tha 

human hair. The n 

coated surface is 

phobic and so re 

soiling agents. Am 

this coating is breathable, flexible yet sup 

durable. The coating is environmentally fr 

as it is created from quartz sand. Additio 

the coatings can be cleaned with water w 

reduces the use of harmful chemicals.You 

ing costs are also reduced! 

weatherproof 


Hydrophobic (water 

repellent) 


repellant 

food safe 





undetectable 


chemicals 



organisations 


technology 


ADVANCED LIQUID 

A.

Die LiquiGlas® Beschichtungstechnologie, die wir Ihnen hier 

vorstellen, ist eine wirklich außergewöhnliche Technologie – High 

Tech Made in Germany. Zur Vermarktung hat die CCM GmbH ein 

einzigartiges Netzwerk geschaffen, zusammen mit der LiquiGlas 

Ltd. aus England im Bereich Vertrieb und Marketing und einigen der 

führenden deutschen Forschungs- und Entwicklungsunternehmen 

im Bereich der Entwicklung und Herstellung von „Flüssigglas“, 

das offi ziell „Beschichtungstechnologie mit ultradünnen SiO²- 

Schichten“ heißt. Diese wirklich bemerkenswerte und vielseitige 

SiO² Technologie hat bereits viele Preise gewonnen aber das 

wichtigste ist, das es dem Anwender in der Industrie und im 

privaten Bereich die Möglichkeit gibt, nahezu alle Oberfl ächen mit 

einer lang anhaltenden, partikelfreien, unsichtbaren und einfach zu 

reinigenden („easy to clean“) Glasschicht zu schützen, die 500 Mal 

dünner ist als ein menschliches Haar. 

Die Glasmoleküle (Siliziumdioxid / SiO²) entstehen aus reinem 

Quarzsand, von dem es in der Natur noch gewaltige Vorkommen 

gibt. Siliziumdioxid ist sogar einer der weltweit in der Natur 

am häufi gsten vorkommenden Rohstoffe. Wie bei haushaltsüblichem 

Glas sind auch unsere Beschichtungen chemisch inert und sehr 

widerstandsfähig gegen Säuren, Laugen und Lösungsmittel. Aber 

trotz der Ähnlichkeit zu üblichem Glas sind die LiquiGlas® 

Beschichtungen doch erstaunlich unterschiedlich. Die Beschichtung 

ist fl exibel, atmungsaktiv, lang anhaltend, hitzebeständig, antimikrobiell, 

hat Anti-Haft-Eigenschaften und ist leicht zu reinigen. 

Dabei ist die Anwendung der LiquiGlas® Produkte denkbar einfach. 

Nach einer sehr guten Vorreinigung können Gegenstände wie z. 

B. Waschbecken, Windschutzscheiben und Textilien in Sekunden 

beschichtet werden. Besonders hervorzuheben ist, dass die 

meisten beschichteten Oberfl ächen nur noch mit klarem Wasser 

gereinigt werden brauchen, was den Gebrauch von chemischen 

Reinigungsmitteln erheblich reduziert und somit die Umwelt in 

großem Umfang schont. Wir beschäftigen uns mit der Entwicklung 

und Vermarktung der Flüssigglas-Technologie bereits seit 2003 und 

in der Folge dessen bieten wir eine große Erfahrung in Abfüllung, 

Marketing und weltweiter Vermarktung an. 

LiquiGlas® - Schützt unsere Welt. / LiquiGlas® – Protecting our world. 

2 

ÜBER UNS / ABOUT US 

LiquiGlas® is an exceptional technology which is brought to 

you by a unique partnership between LiquiGlas Ltd of the UK and 

CCM GmbH of Germany. Together we are working with some of 

Germany’s leading R+D companies; these partner organisations 

specialise in the creation of “Ultra Thin SiO² Layering Technology” 

which is better known as Liquid Glass. SiO² technology, in its 

various forms, has won numerous awards but most signifi cantly 

it allows the end user to protect both industrial and domestic 

surfaces with a super durable coating of invisible, easy to clean, 

glass. 

In essence the technology allows the end user to deposit a nano 

scale layer of molecular, particle free glass, onto the surface of most 

items. The molecules of glass (silicon dioxide/SiO²) come from pure 

quartz sand, of which there are vast reserves, as silicon dioxide 

is one of the most abundant compounds on the planet. Just like 

domestic glass the coatings are chemically inert and highly resistant 

to acids. The coatings also offer resistance to alkalis and solvents; 

however, despite some similarities to standard glass the LiquiGlas® 

coatings are stunningly different. The layer is fl exible, breathable, 

highly durable, heat tolerant, anti-microbial and offers non stick 

and “easy clean” characteristics. The application of the LiquiGlas® 

range of products is amazingly straight forward. After preparatory 

cleaning, items such as wash basins, windscreens, and fabrics can be 

coated in a matter of seconds. Signifi cantly most coated surfaces 

can be cleaned with water alone, this of course massively reduces 

the use of environmentally damaging cleaning products. 

CCM has been involved with the development and marketing of 

Liquid Glass technology for over 8 years and as a result we offer 

unrivalled experience in the supply, packaging and world-wide 

distribution of this technology. 

think green

FLÜSSIGGLAS-TECHNOLOGIE / 

LIQUID GLASS TECHNOLOGY 

Alles begann 1845 in Paris, als J.J. Ebelmen, ein französischer 

Wissenschaftler, als erster den „Sol-Gel-Prozess“ entdeckte, der 

einfach ausgedrückt besagte, dass man „durch Manipulation einer 

Flüssigkeit, die Kieselsäure enthält, Glas erschaffen konnte“. Dies 

war eine wirklich interessante Entdeckung, zu dieser Zeit aber sehr 

theoretisch und das einzige, was in der Praxis am Ende übrig blieb, 

waren „Klumpen aus Glas“. Der nächste wichtige Entwicklungsschritt 

kam 1939, als die deutsche Firma Schott Glaswerke begann, 

die Technologie weiter zu entwickeln. Nach 20 Jahren weiterer Forschung 

konnten dann die ersten Gegenstände mit SiO2 beschichtet 

werden. Dieser Prozess war aber immer noch sehr komplex 

und teuer. Und während sich die Welt auf die Computerrevolution, 

die Weltraum- und Gen-Technik konzentrierte, 

wurde die „Flüssigglas-Technologie“ 

in Deutschland weiter entwickelt und es wurden 

Produkte kreiert, die einfach anzuwenden 

und aufzutragen waren. Ziel war es, eine unsichtbare 

Schicht zu erzeugen, die nahezu 

jede Oberfl äche schützen und deren Eigenschaften 

verbessern kann. Nach der Jahrtausendwende 

waren diese Art von Beschichtungen 

dann erstmals marktreif. Wir sind 

stolz, das wir von Anfang an mit dabei waren, 

diese Technologie in vielen Märkten mit einzuführen. 

A.L.G.T (Advanced Liquid Glass Technology = 

Weiterentwickelte FlüssigglasTechnologie) 

Es sind nun über 150 Jahre seit der Entdeckung des Sol-Gel-Pro- 

zesses vergangen und es wird permanent weiter an derTechnologie 

geforscht und entwickelt.Aufgrund unserer Vernetzung mit einigen 

der führenden Forschungs- und Entwicklungsfi rmen in Deutsch- 

land in diesem Bereich sind wir heute in der Lage, Ihnen die 3. 

Generation von Flüssigglas-Produkten anzubieten und zu liefern - 

effi ziente Beschichtungen zu bezahlbaren Preisen. Im Wesentlichen 

ist A.L.G.T. der derzeitige Höhepunkt der Entwicklung nach 150 

Jahren.Wo wird die Reise in den nächsten 150 Jahren hingehen? 

Selbstverständlich haben wir auf diese Frage keine Antwort.Wir 

können Ihnen aber in jedem Fall den aktuellen Stand dieser Tech- 

nologie für die Welt von heute liefern. 

A.L.G.T. © 

ADVANCED LIQUID GLASS TECHNOLOGY 

It all started in Paris in 1845, when J.J. Ebelmen, a French 

scientist fi rst discovered the Sol Gel process. In simple terms, he 

discovered that by manipulating a liquid which contained silica he 

could create glass. This was a very interesting theoretical discovery 

but at this time all that he was left with was small lumps of glass 

which were of no specifi c use. The next major step came in 1939 

when the Schott Glaswerke company of Germany started to reexamine 

the technology. After a further 20 years of research they 

started to produce the fi rst items coated with * SiO² ; however the 

processes were still complex and expensive. Evidently continued 

R+D was called for! Whilst the world was focussing on the 

space race, the computer revolution and the genome 

projects, the scientifi c community in Germany was 

creating “liquid glass technology” which could be 

applied on a DIY basis. The target being, to 

produce an undetectable coating, which could 

protect and enhance almost any surface. At 

the start of the millennium such coatings 

became available for the fi rst time and we 

are proud to say that we were involved in 

their launch to a wide range of markets. 

A.L.G.T. (Advanced Liquid Glass Technology). It 

has now been over 150 years since the discovery 

of the Sol Gel process and advances are continually 

being made. Due to our being linked with the leading 

R+D organisations in Germany we are able to bring you 

the 3rd Generation of Liquid Glass Technology via which we offer 

more effi cient coatings, at reduced cost to the consumer. In essence 

A.L.G.T. is the culmination of 150 years of development. Where will 

we be in another 150 years? 

Obviously we do not know the answer to this question ... but we 

do know that we offer state of the art technology for the world 

of today. 

*Silica (silicon dioxide or SiO²) is one of the most common 

chemical compounds. 

3


PROTECTION 



mirrors - tiles - windscreens, wash basins etc. 

A.L.G.T. ® 


Contents: 



5 dry wipes 


410 415 


PROTECTION 

Ideal for coating 


WC - mirrors - tiles - windscreens, wash basins etc. 


405 401 



Fon +49 (0) 2206 / 938590-0 · Fax +49 (0) 2206 / 938590-99 




Easy to use 

Dirt-repelling 

Hydrophobic (repels water) 

Environmentally neutral 

No negative impact on visual appearance 

Long-lasting 

Anti-microbial 

Economical 

Multi award winning technology (including internationally 

recognized environmental award) 

Application: 

1. Initially clean the surface to remove any heavy soiling such as fats and soap residues. 

Rinse or wipe down the surface with clean water and then dry the surface. 

Spray LIQUIGLAS ® pre cleaner on the surface and thoroughly clean the area with a clean 

cloth or tissue. (It is advisable to wear gloves as a fingerprint can be 100 times thicker 

than the coating.) The surface is now residue-free and the prepared for the application of 

LIQUIGLAS ® pre cleaner. 

2. Spray LIQUIGLAS ® Glass & Ceramic on the clean surface or onto a suitable low absorbency 

wipe and ensure full coverage by wiping the liquid over the whole surface. (3ml 

per m² is an approximate coverage rate) After 2 minutes finish the application by gently 

buffing the surface for a few seconds. The surface is now coated with a dirt-repelling and 

UV-stable protection. 



of water and seek medical advice. If swallowed, seek medical advice immediately 

and show this container or label. 

Suitable for application on: 

Glass and ceramic surfaces, ideal for use on wash basins, shower screens, windscreens, 

windows, skylights, conservatories, balcony doors, shop windows, glass cabinets, glass 

facades, mirrors and much more. 

ingly this coating is breathable, fl exible yet super durable. The coating is environmentally 

friendly as it is created from quartz sand. Additionally the coatings can be cleaned with 

water which reduces the use of harmful chemicals.Your cleaning costs are also reduced! 

PLASTIC 

PROTECTION 

A.L.G.T. ® 

environmentally damaging, fail to fully remove the dirt or they apply 

a coating on top of the dirt which makes the surface look clean. 

LIQUIGLAS ® coats these “mountains” with pure, nano scale particle 

free glass, which is 500 times thinner than a human hair. The newly 

coated surface is super-phobic and so rejects soiling agents. Amaz- 

mally cling to these surfaces. Traditional cleaners, which are often 

How LIQUIGLAS ® works. Under a microscope most surfaces are 

very rough and look like mountain ranges. Dirt and bacteria nor- 


Wash basins, shower screens, fridges, works surfaces, 

car dashboard/interior, garden furniture, 

motorcycle helmets/visors, skis etc. 


Contents: 



5 dry wipes 


GLAS / KERAMIK 

Durch LiquiGlas® GLAS & KERAMIK Veredelung erhalten 

Oberflächen aus Glas wie z.B. Fenster, Dachfenster, 

Wintergärten, Balkontüren, Schaufenster, Vitrinen, Glasfassaden 

uvm. einen nur geringen Kontakt mit Schmutzpartikeln. 

Verschmutzungen, Fingerabdrücke und Wasserflecken lassen 

sich leicht und ohne Verwendung von aggressiven chemischen 

Reinigungsmitteln The beading entfernen. 

effect has disappeared or become weaker - why? 

Either the coating has worn away after prolonged use or the surface needs to be cleaned 

Welcome to the world of SiO Liquid Glass, nano layering technology. The product which you 

2 

have before you offers truly stunning characteristics. 



A nanometer is a unit of measurement.1nm (nanometer) is one billionth of a metre. The name 



No. Our coatings are recognised as being particle free. Our technology is based on molecular 

SiO , which is created via an adaptation of the Sol-Gel process. 

2 

Why can´t you Art. see our treatment? Nr. 405 


500 times thinner than the a human hair and you need to use an electron microscope to see 

the coatings. 

So what exactly does the product contain? 125ml Vorreiniger 

This truly amazing product contains pure, particle free, SiO (Silicon Dioxide) which means 

2 

that it contains “pure glass”. The glass is in a molecular form and is held in a liquid; it does not 

become “glass” until it is allowed to dry. The glass in windows is not pure! 

So how does the nano coating work and what are the benefi ts? 

The liquid glass 50ml coating is a highly durable, Veredelung fl exible, super smooth, breathable and Super (für 20-30m²) 

Phobic coating (=repels oil , water, and dry soiling). Dry dirt will not stick to treated as 

each fi lament of every fi bre is protected with a nano scale layer of glass. Most signifi cantly, 

almost all treated surfaces can be cleaned with water alone. This means that in most instances 

environmentally damaging cleaning chemicals are not needed. 

When is the 5 surface Trockentücher 

suffi ciently coated? 

After applying the coating to the surface ensure that the whole of the surface is coated by 

working across the area.Work quickly and in in a methodical manner. Over application results 

in a visble deposit which can be buffed off. 

Are surfaces coated with LIQUIGLAS + Gebrauchsanleitung 

EAN Code 4260168444054 

® self cleaning? 

No, we offer “easy clean” technology. LIQUIGLAS ® in order to re expose the surface. Wiping with pre cleaner or an alcohol cleaner will also 

rejuvenate the coating. 


Re application follows the format used during the initial application process; simply make sure 

that the surface is completely clean , dry and free of contaminants such as washing powder 

residue, or detergents. Please read the section relating to “application”. 

Are the LIQUIGLAS 

has non-stick characteristics; similar to 

pans which are coated with non stick coatings. 


Every environment is different as some living spaces encounter heavy usage whilst others 

encounter far less “wear and tear.” The treatments are all very durable and they will last for 

many months or even years. We expect the hard surface coatings to last for at least 6 months 

in domestic environments. 

® coatings “food safe”? 


Are the LIQUIGLAS ® coatings dermatologically tested? 





Liquid Glass bonds to most surfaces via quantum forces. The coatings can’t be applied to 

oily woods, hybrid stone mixtures or non stick surfaces. There are no glues, resins or other 

chemicals within this product. 


Our technology is recognised as being of great signifi - 

cance in the battle to protect our planet. 

The technology has won several awards from leading 

“environmental” agencies. 

It should be remembered that in most instances treated 

surfaces can be cleaned with water alone this means 

that a vast amount of POPs (Persistent Organic Pollutants) 

such as detergents can be withdrawn from sale. 

Can calcium deposits be removed more easily from a surface coated with LIQUIGLAS ® ? 

Laboratory tests show that calcium deposits can be removed from a coated glass plate with 

one fi fth of the energy normally needed to remove scale from an uncoated sample. Warm 

water should be applied to the deposits before wiping them off. 

Please share your experience with the team at LIQUIGLAS ® . If you have tested a new application 

and found it good, we may publish it on our website. We will be pleased to forward a 

sample items of a new LIQUIGLAS ® Contents: 

125 ml pre-cleaner, 50ml treatment (for 20-30m²), 

5 dry wipes 

coating to any person who has their comments published 

on our web page. For more information, visit www.liqui-glas.com 


Art. Nr. 401 

Veredelungstücher, besonders geeignet für kleinere Flächen 

wie z.B. Autoscheiben, Set bestehend aus: 

2 Vorreinigungstücher 160 x 220mm 

2 Veredelungstücher 160 x 220mm (für ca. 2-2.5m² pro Tuch) 

+ Gebrauchsanleitung 

EAN Code 4260168444016 

KUNSTSTOFF 

LiquiGlas® KUNSTSTOFF ist ein anwendungsfertiges Produkt, 

optimiert für Oberfl ächen aus Kunststoff wie z.B. Bodenbeläge, 

Arbeitsoberfl ächen, Duschkabinen, Auto-Cockpit, Kühlschrank, 

Gartenmöbel, Küchengeräte und Motorradhelme. Erleichtert 

die Reinigung von Verschmutzungen. 

Art. Nr. 447 

125ml Vorreiniger 

50ml Veredelung (für 20-30m2 deep cleaning and application. 

How do I know when the coating is no longer in place? 

The beading effect has disappeared or become weaker - why? ) 

5 Trockentücher detergents. Please read the section relating to “application”. 



EAN Code 4260168444474 



Are the LIQUIGLAS ® coatings ´dermatologically tested? 



Liquid Glass bonds to most surfaces via quantum forces. 

The coatings can’t be applied to oily woods, hybrid stone 

mixtures or non stick surfaces. There are no glues, resins or 

other chemicals within this product. 


Our technology is recognised as being of great signifi cance 

in the battle to protect our planet. 

Welcome to the world of SiO Liquid Glass, nano layering technology. The product which you have 

2 









Why can´t you see our treatment? 

Our thinnest coatings are approximately 100nm thick. This means that they are approximately 500 

times thinner than the a human hair and you need to use an electron microscope to see the coatings. 



2 




The liquid glass coating is a highly durable, fl exible, super smooth, breathable and Super Phobic coating 

(=repels oil , water, and dry soiling). Dry dirt will not stick to treated surface as each fi lament of 

every fi bre is protected with a nano scale layer of glass. Most signifi cantly, almost all treated surfaces 

can be cleaned with water alone. This means that in most instances environmentally damaging cleaning 

chemicals are not needed. 

When is the surface suffi ciently coated? 


across the area.Work quickly and in in a methodical manner. Over application results in a visble 


Can I remove spills and staining? 

Liquid spills can be removed from coated fabrics by mopping with a dry tissue. Already dried stains 

can be removed by sponging with a damp cloth. 


No, we offer “easy clean” technology. LIQUIGLAS ® has non-stick characteristics; similar to pans 


Does the coating reduce scratching on “plastic” shower screens? 

The LIQUIGLAS ® coatings are very durable and they will reduce the abrasion of plastic surfaces. 

What is the best way to clean the coated surface? 

It is best to clean the surface with warm water and a microfi bre cloth. Dry the surface with a cloth 

or tissue to get that “good as new” look. 

Do you need cleaning agents to clean coated surfaces? 

One of the benefi ts of using LIQUIGLAS ® is that in most instances the technology removes the 

need to use environmentally damaging cleaning products. 

How long will the coating last? 

The LIQUIGLAS ® The coatings are heat tolerant in the range -150°C to +450°C. 

Some plastic surfaces are very hydrophobic (repel liquids). Can the LIQUIGLAS 

coating is removed by abrasion . Some plastic surfaces are used and cleaned 

frequently ( eg.work tops , shower trays, wash basins ) Other surfaces are cleaned less frequently( eg 

refrigerators) The coating on a wash basin will last for many months . The coating on a fridge should 

last for at least one year. 

® be applied to these 

surfaces? 

Some surfaces are coated with thin waxes or special agents when they are manufactured. It is essential 

that these are removed prior to applying LIQUIGLAS ® . 

Also, some “new” surfaces benefi t from being vigorously cleaned with a microfi bre cloth prior ot 

Water will no longer “bead” on the surface and cleaning will become more diffi cult and less effective 

Can the surface become dirty over time? 

Over time microscopicaly small soiling agents can adhere to the surface. Wiping with an alcohol 

based cleaner will rejuvinate the surface. 

Either the coating has worn away after prolonged use or the surface needs to be cleaned in order to 

re expose the surface. Wiping with pre cleaner or an alcohol cleaner will also rejuvenate the coating. 




The technology has won several awards from leading 

“environmental” agencies. 

It should be remembered that in most instances treated 

surfaces can be cleaned with water alone this means that a 

vast amount of POPs (Persistent Organic Pollutants) such as detergents can be withdrawn from sale. 

Can calcium deposits be removed more easily from a surface coated with 

LIQUIGLAS ® Contents: 

? Laboratory tests show that calcium deposits can be removed from a coated glass 

plate with one fi fth of the energy normally needed to remove scale from an uncoated sample. Warm 



2 treatment wipes 160 x 240mm 

(coverage approx. 2-2.5m² per wipe) 

PLASTIC 

PROTECTION 


Wash basins, shower screens, fridges, works surfaces, car dashboard/ 

interior, garden furniture, motorcycle helmets/visors, skis etc. 

447 445 



Fon +49 (0) 2206 / 938590-0 · Fax +49 (0) 2206 / 938590-99 




Easy to use, Dirt-repelling, Hydrophobic (repels water), 

Environmentally neutral, No negative impact on visual 

appearance, Long-lasting, Anti-microbial, Economical, Multi 

award winning technology (including internationally recognized 

environmental award) 



of water and seek medical advice. If swallowed, seek medical 

advice immediately and show this container or label. 

2. Use the wipe to apply LIQUIGLAS ® Plastic on the clean surface. Ensure full 

coverage. Work quickly as the wipe will dry after 3 minutes. Allow the surface 

to dry for a further 3 minutes then buff with a soft cloth. The surface is now 

coated with a dirt-repelling and anti microbial coating. 

Application: 

1. Initially clean the surface to remove any heavy soiling such as soap particles. 

Rinse or wipe down the surface with clean water and then dry the surface. Next, 

deep clean the surface with the pre cleaning wipe (It is advisable to wear gloves 

as a fingerprint can be 100 times thicker than the coating.) The surface is now 

residue-free and the prepared for the application of LIQUIGLAS ® Plastic. 

Suitable for application on: 

Wash basins, shower screens, fridges, works surfaces, car dashboard/interior, 

garden furniture, motorcycle helmets/visors, skis etc. 

How LIQUIGLAS ® works. Under a microscope most surfaces 

are very rough and look like mountain ranges. Dirt and 

bacteria normally cling to these surfaces. Traditional cleaners, 

which are often environmentally damaging, fail to fully 

remove the dirt or they apply a coating on top of the dirt 

which makes the surface look clean. LIQUIGLAS ® coats these 

“mountains” with pure, nano scale particle free glass, which 

is 500 times thinner than a human hair. The newly coated surface is super-phobic 

and so rejects soiling agents. Amazingly this coating is breathable, fl exible yet 

super durable. The coating is environmentally friendly as it is created from quartz 

sand. Additio-nally the coatings can be cleaned with water and so reduces the 

use of harmful chemicals. Your cleaning costs are also reduced! 

LIQUIGLAS ® 

Shoe can be 

used to protect 

leather, suede and 

fabric footwear. 

By applying LIQUIGLAS ® 

LIQUIGLAS 

TexTile & leaTher 

Shoe on to the surface of your 

ProTecTion footwear you will be protecting the 

surface with a undetectable, super durable, 

stain repelling layer of pure nano scale 

glass. Ideal for use on training shoes, fabric 

basket ball shoes, suede shoes, non coated/ 

polished leather, handbags etc. The multi SHOE 

award winning technology is easy to apply. 

Firstly ensure that the surface is completely 

clean as the coating will not adhere to PROTECTION 

any form of dirt, or grease. The coating 

can be applied to moist fabrics. Spray the 

coating on to the surface from a distance 

of approximately 25cm ensuring that the 

surface is fully coated and moistened. Two 

spraying passes is normally sufficient. Wipe 

over the surface with a gloved hand, if over 

application causes pooling on the surface. 

This action will disperse the liquid. The 

coating becomes fully bonded after drying 

for 24hrs at room temperature. Warm air 

drying can be used. 

Cleaning: Coated items should be cleaned 



® 

Textile and Leather 

treatment protects 

fabrics, suede and leather* 

with and undetectable layer of 

nano scale, particle free glass. The 

coating which is approximately 500 

times thinner than a human hair is flexible, 

breathable highly durable and anti microbial. It 

protects against dust, oil, grease, water and liquids 

such as tea and coffee. 

(*Some leathers and suede are protected with special 

oils or coating, as a result bonding of the Quantum 

LiquiGlas ® may be impaired. In all instances staining 

agents must be removed from suede and leather 

within 2-3 minutes. ) 

LIQUIGLAS ® Textile and Leather is ideal for use 

on upholstery, mattresses, suits, car seats, ties, 

outdoor wear, work wear etc. 

Application: To achieve a long lasting effect all 

surfaces must be completely clean, stable and free 

of any coatings such as conditioners or silicones. 

Firstly test for colour fastness on an area that will 

be hidden from view. 

To apply LIQUIGLAS ® advice 

immediately 

and show this 

container and label. 

Do not inhale atomized 

spray. Irrigate with water 

if splashed into the eyes. Seek 

medical guidance if any conditions 

persist. Use the contents of the bottle 

within 6 months of opening. Protect the 

bottled liquid from frost. 

How LIQUIGLAS 

Textile and Leather spray 

the surface from a distance of approximately 

25cms. Ensure that the fabric is evenly and fully 

moistened but not “soaking wet”. (2-3 spraying 

passes, “wet on wet”, is usually sufficient for a 

medium thickness fabric such as a tie or blouse. 

Thicker fabrics normally require further spraying 

passes.) Disperse any over-application of the 

liquid by wiping the surface with a gloved hand. 

The coating becomes fully functional after 24hrs. 

warm air drying can be used. The coating can 

be ironed using a low temperature setting. Clean 

with warm water max 60°C. Sponging or soak 

washing is advised. 

Coverage: For up to 10 m², depending on the 

density and surface area of the fabric. 


the eyes, do not drink. If swallowed, seek medical 

® works. Under a microscope 

most surfaces are very rough and look like 

mountain ranges. Dirt and bacteria normally 

cling to these surfaces. Traditional cleaners, 

which are often environmentally damaging, fail 

to fully remove the dirt or they apply a coating 

on top of the dirt which makes the surface look 

clean. LIQUIGLAS ® coats these “mountains” 

with pure, nano scale particle free glass, which is 

500 times thinner than a human hair. The newly 

coated surface is super-phobic and so rejects 

soiling agents. Amazingly this coating is breathable, 

flexible yet super durable. The coating is 

environmentally friendly as it is created from 

quartz sand. Additionally the coatings can be 

cleaned with water which reduces the use of 

harmful chemicals. Your cleaning costs are also 

reduced! 



repellant 

food safe 





undetectable 



chemicals 



organisations 


technology 


4 


A.L.G.T. ® 

PRODUKTE / PRODUCTS 

Art. Nr. 445 

Veredelungstücher, besonders geeignet für kleinere Flächen, 

Set bestehend aus: 


2 Veredelungstücher 160 x 220mm (für ca. 2-2.5m2 Please share your experience with the team at LIQUIGLAS 

) 


EAN Code 4260168444450 

® . If you have tested a new application 

and found it good, we may publish it on our website. We will be pleased to forward a sample items 

of a new QLG coating to any person who has their comments published on our web page. For more 

information, visit www.liqui-glas.com 

Will hot water remove the coating? 

TEXTIL & LEDER 

Durch LiquiGlas® TEXTIL erhalten 

Textilien einen unsichtbaren Schutz gegen Schmutz, Wasser 

uvm. Geeignet für Markisen, Stoffbezüge, Zelte, Cabrioverdecke, 

Autositze, Freizeit- und Arbeitsbekleidungen, 

Tischdecken, Sonnenschirme, Polstermöbel, Hemden, Blusen, 

Krawatten, Sakkos uvm. 

Art. Nr. 410 

250ml (für bis zu 10m², je nach Saugfähigkeit des Materials) 


EAN Code 4260168444108 

Höherwertige Version, speziell geeignet für Schuhe und stark 

beanspruchte Textilien. 

Art. Nr. 415 

125ml (für bis zu 5m², je nach Saugfähigkeit des Materials) 


EAN Code 4260168444153 


Surfaces which have been coated with LiquiGlas ® GLASS 

& CERAMICS become resistant to soiling. Grime, finger 

marks and water stains can be easily removed without using 

aggressive chemical cleaning agents. Ideal for use on wash 

basins, shower screens, windscreens, windows, skylights, 

conservatories, balcony doors, shop windows, glass cabinets, 

glass facades, mirrors and much more. 

Art. No. 405 

125ml pre-cleaner 

50ml treatment (for 20-30m²) 

5 dry wipes 

+ user instructions 

EAN Code 4260168444054 

Art. No. 401 

Treatment wipes, ideally suited for small surfaces, e.g. car 

windscreen, kit content: 



(coverage appr. 2-2.5m² per wipe) 


EAN Code 4260168444016 

PLASTIC 

LiquiGlas® PLASTIC is suitable for coating domestic surfaces 

such as wash basins, shower screens, fridges, works surfaces, 

car dashboard/interior, garden furnitures, motorcycle helmets, 

ski etc. 

Art. No. 447 

125ml pre-cleaner 

50ml treatment (for 20-30m²) 

5 dry wipes 


EAN Code 4260168444474 

Art. No. 445 

Treatment wipes, suitable especially for small surfaces, 

kit content: 

2 pre cleaning wipes 160 x 220mm 

2 treatment wipes 160 x 220mm (for 2-2.5m²) 


EAN Code 4260168444450 

TEXTILE & LEATHER 

After treatment with LiquiGlas® TEXTILE, textiles benefit 

from a completely undetectable protective coating. The 

coating prevents water and soiling agents etc. from staining 

the fabric. It offers effective protection on sun blinds, fabric 

coverings, car and yacht furnishings, leisure wear, work clothes, 

upholstery, carpets, shirts, blouses as well as ties and jackets, 

children’s car seats, mattresses etc. 

Art. No. 410 

250ml (for up to 10m², depending on the surface area and 

absorbency of the textile) 


EAN Code 4260168444108 

High quality variant, especially suitable for shoes and textiles 

which experience heavy usage. 

Art. No. 415 

125ml (for up to 5m², depending on the surface area and 

absorbency of the textile) 


EAN Code 4260168444153

PRODUKTE / PRODUCTS 

HYGIENIC / TOILET 

PROTECTION 


toilet seats and plastic surfaces located in the toilet area. 

(Ideal for use where high levels of cleanliness are essential.) 

Contents: 



(1 wipe protects one toilet seat set) 


460 

SPECTACLE 

PROTECTION 

Ideal for 

all plastic spectacles, lenses, sunglasses and visors 

WC 

Auf veredelten WC-Sitzen lassen sich Schmutz und Bakterien 

durch Abwischen mit einem feuchten Tuch und ohne 

chemische Reiniger problemlos entfernen. Geeignet für 

WC-Sitze und Toilettensitzerhöhungen (im Pflegebereich). 

How do I know when to re apply the coating? 

Water droplets will form “beads“ on the coated surface. Water droplets become fl attened when 

the coating has worn away. 

Der lang anhaltende antimikrobielle Effekt des Produktes 

Are surfaces coated with LIQUIGLAS 

ersetzt jedoch nicht die Desinfektion bei extrem hoher 

Bakterienkontamination. 







or even years. We expect the hard surface coatings to last for at least 6 months in domestic 

environments. 


2 












coatings. 



2 




The liquid glass coating is a highly durable, fl exible, super smooth, breathable and Super Phobic 

coating (=repels oil , water, and dry soiling). Dry dirt will not stick to treated surface as each 

Art. Nr. 460 

Are the LIQUIGLAS Set, Inhalt: 


2 Veredelungstücher 100 x 140mm 

(ein Tuch pro WC Sitz) 


EAN Code 4260168444603 









fi lament of every fi bre is protected with a nano scale layer of glass. Most signifi cantly, almost 

all treated surfaces can be cleaned with water alone. This means that in most instances environmentally 

damaging cleaning chemicals are not needed. 



across the area. Work quickly and in in a methodical manner. Over application results in a visble 


Is the LIQUIGLAS ® Hygienic / Toilet suitable for use on the ceramic surfaces of the WC? 

The LIQUIGLAS ® fHygienic / Toilet is designed for application to plastic or lacquered surfaces and 

so it is not suitable for application to ceramic surfaces. 

What is the best way to clean the coated WC seat? 

The seat can be cleaned with warm water and a cloth or disposable tissue; however despite 

offering highly effective background anti microbial protection there are circumstances in which 

additional disinfection may be necessary. 

Will cleaning products damage the coating? 

Standard non abrasive domestic cleaning products will not damage the coating. Do not use any 

abrasive pads or abrasive cleaning agents on coated surfaces. 



to re expose the surface. Wiping with pre cleaner or an alcohol cleaner will also rejuvenate the 

coating. 





BRILLE 

Durch die LiquiGlas® BRILLEN Veredelung erhalten sämtliche 

Brillen einen nur geringen Kontakt mit Schmutzpartikeln. 

Can I wear the spectacles immediately after coating them? 

The spectacles can be worn immediately after appliction but do not clean the lenses until at least 

Verschmutzungen, Fingerabdrücke und Wasserflecken lassen 

one hour has elapsed. 

Is the coating suitable for sun glasses? 

The coatings are ideal for use on sunglasses. 

sich leicht und ohne Verwendung von aggressiven chemischen 

Are surfaces coated with LIQUIGLAS 

Reinigungsmitteln entfernen. Langanhaltende Versiegelung 

erleichtert das Reinigen erheblich. Ideal auch für Sportbrillen. 

Flüssigkeit enthält Alkohol, nicht für alkoholempfindliche 

Brillen geeignet. 








environments. 




coating. 




2 












coatings. 



2 





coating (=repels oil , water, and dry soiling). Dry dirt will not stick to treated surface as each 







deposit which can be buffed off. Anwendungsgebiete: 

Can I use LIQUIGLAS 

Brille, Skibrille, Arbeitsbrille, Sonnenbrille 


® for spectacles on all glass and plastic lenses? 

Almost all modern spectacle lenses are made of „plastic“ and the enclosed wipes are designed for 

plastic surfaces. The coating will not bond effi ciently to glass. 

Will the LIQUIGLAS ® treatment damage special coatings which are already in place on my 

spectacles? 

The LIQUIGLAS ® coating is designed to be applied directly on to the surface of the lens. It is not 

possible to predict how the LIQUIGLAS ® coating will perform on all of the wide range of special 

coatings which are applied to some lenses. 

How long will the coating last? 

The coating will last for many months and up to a year. 

Can I clean the coated surface with spectacle cleaning agents? 

After coating lenses with LIQUIGLAS ® the surface is completely clean, dry and free of contaminants such as washing powder residue, or 



all cleaning can be conducted with water and a cloth and 

so expensive cleaning agents are not needed. (Alcohol based lens cleaning agents will not damage 

the coating.) 

Will the coating have a negative effect on the optical performance the lens? 

The coating is approximately 100nm thick (500 times thinner than human hair) and so it will not 

have any recogniseable effect on light transmission. 

Does the coating prevent abrasion of the lens? 

The coatings are highly durable and inhibit abrasion and scratching. 












Our technology is recognised as being of great signifi cance in the battle to protect our planet. 





Please share your experience with the team at LIQUIGLAS ® Contents: 

. If you have tested a new application 





(1 wipe per pair of spectacles) 

402 







Art. Nr. 402 

Set, Inhalt: 

3 Vorreinigungstücher more information, visit www.liqui-glas.com 100 x 140mm 


(ein Tuch pro Brille) 


EAN Code 4260168444023 

FELGE 

Durch LiquiGlas® FELGEN Veredelung erhalten Felgen 

wie z.B. Auto-, Fahrrad- oder Motorradfelgen einen nur 

Can I apply the coating in the rain? 

geringen Kontakt The coating mit can only be applied Schmutzpartikeln. to dry surfaces. 

Fett, Öl, Bremsstaub 

Can I apply the coating in hot sunlight? 

The coating should not be applied in direct hot sunlight or to very warm surfaces. 

und Schmutz lassen Can I drive the vehicle sich immediately after leicht application? und ohne Verwendung 

The vehicle can be driven fi ve minutes after the application of the coating has been completed. 

Are surfaces coated with LIQUIGLAS von aggressiven chemischen Reinigungsmitteln entfernen. 

Verhindert das Einbrennen von Bremsstaub. 





Every environment is different as some living spaces encounter heavy usage whilst others encoun- 

, 

, 

I 


2 







No. Our coatings are recognised as being particle free. Our technology is based on molecular SiO2 which is created via an adaptation of the Sol-Gel process. 




coatings. 



2 





coating (=repels oil water, and dry soiling). Dry dirt will not stick to treated surface as each 








Can use the coating on all alloy wheels? 

Most alloy wheels are coated with a lacquered fi nish at the manufacturing stage. LIQUIGLAS 


® 

Alloy Wheel coating is designed for use on such wheels. For uncoated alloy wheels please use the 

LIQUIGLAS ® for stainless steel and aluminium (art. no. 470). 

Is the coating removed after washing in auto car washes? 

All LIQUIGLAS ® I 

ALLOY WHEEL 

PROTECTION 

Ideal for use 

on car rims, bicycle rims & motorcycle rims. 

coatings are highly durable and they will withstand numerous washing cycles. This 

would equate to over a hundred washing cycles with water and a micro fi bre. It is not possible to 

provide exact information about the number of auto wash cycles that the coating will withstand but 

test data indicates that the coating withstands many tens of auto wash cycles. 

ter far less “wear and tear.” The treatments are all very durable and they will last for many months 


environments. 




coating. 

Does road salt degrade the coating? 


The coatings are resistant to road salt and all standard cleaning chemicals. 



Can wash the coated surface with abrasive pads or cleaning agents? 


Abrasive pads or agents should not be used. In most instances all cleaning can be conducted with 

water and a cloth or soft brush. 

Does the coating withstand heat and cold? 

The coatings are highly resistant to temperature (-150 C to + 450 C) and so hot brake dust will 

not burn into the coating. 

Please share your experience with the team at LIQUIGLAS ® . 

Contents: 

4 pre-cleaning wipes 160 x 240 mm 

4 treatment wipes 160 x 240 mm (1 wipe per auto wheel) 

If you have tested a new application 




440 







Art. Nr. 440 Can the treatments be re applied? 



Set, Inhalt: 




4 Veredelungstücher 160 x 220mm (ein Tuch pro Felge) 


EAN Code 4260168444405 













WC / HYGIENIC TOILET WIPE 

After treatment with LiquiGlas® HYGIENIC Protection for 

WC’s, dirt and bacteria can be wiped off toilet seats with 

great ease. Anti-bac. 

Art. No. 460 

Kit, content: 



(1 wipe protects one toilet seat set) 


EAN Code 4260168444603 

SPECTACLE PROTECTION 

Surfaces which have been coated with LiquiGlas® 

SPECTACLES protection become resistant to soiling and 

abrasion. Finger marks and water stains are easily removed 

without using aggressive chemical cleaning agents. Ideal for all 

spectacles, lenses and sunglasses. Recommended when sailing 

or working in rainy conditions as liquids do not adhere to 

coated surfaces. 

Suitable for ski goggles, industrial eye coverings, sun glasses 

and spectacles. 

Art. No. 402 

Kit, content: 



(one wipe per pair of spectacles) 


EAN Code 4260168444023 

ALLOY WHEEL 

The LiquiGlas® ALLOY WHEEL treatment inhibits the 

adhesion of soiling agents. Grease, oil, brake dust and road 

grime can be removed easily and without application of 

aggressive chemical cleaning agents. LiquiGlas® ALLOY 

WHEEL prevents the “burning in” of brake dust. 

Art. No. 440 

Kit, content: 


4 treatment wipes 160 x 220mm (one wipe per rim) 


EAN Code 4260168444405 

5

6 

LIQUIGLAS ® 

Wood For 

protecting natural 

wood against moisture, 

mould, soiling abrasion, 

and bacteria. Ideal for use on 

Saunas, doors, art works, garden 

furniture, tables, toys and much 

more. LIQUIGLAS ® Wood is a water 

based coating which provides an undetectable, 

flexible and breathable glass coating which can 

be applied in seconds to clean stable wooden 

surfaces. It can be applied to moist wood but it is 

not suitable for oily wood such as teak. 

Application: 

Spray LIQUIGLAS ® Wood on to the surface 

from a distance of approximately 25cm. To 

achieve optimal preservation of wood, conduct 

2-3 spraying passes (wet on wet). Ensure that 

the whole surface is fully moistened. The coated 

item can be handled when the surface is dry. Full 

curing takes approximately 24hrs at an ambient 

temperature of 20°C. 

NOTE: 

Please note that some wood will continue to 

dry and or swell even after the application of 

the coating. The manufacturer accepts no liability 

for any deformation or adverse performance 

characteristics of the coated wood. The coating 

is heat tolerant (tolerant to temperatures in the 

rage -150 to +450°C) but it is important to note 

that the underlying wood may react to hot items 

which are placed on the surface. 


eyes. Do not drink. If swallowed, seek medical 

advice immediately and show this container and 

label. Do not inhale atomized spray. Please use 

content within 6 months of opening. 

Coverage: Up to 10m², depending on 

the surface area and absorbency of the wood. 

LIQUIGLAS ® 

Stone provides an 

invisible breathable 

glass layer which 

protects against staining 

and weathering. Ideal for 

natural-stone, concrete, grout, 

bricks, terracotta, clay tiles etc. 

LIQUIGLAS ® Stone is ready to use and can 

be sprayed directly on to the surface. 

Coverage: Up to 10 m 2 , depending on the 

porosity and surface area of the stone. 

Application: The surface must be completely 

clean and stable. The application is very 

simple. Spray the surface from a distance of 

approximately 25 cm ensuring that the surface is 

evenly moistened. (2 to 3 passes ensuring “wet 

on wet” coverage is recommended.) If pooling 

occurs simply wipe the surface to disperse 

the liquid. The coating becomes fully cured 

after 24hrs; when the ambient temperature 

is approximately 20°C. Warm air drying can 

be used. The coating can be used lightly when 

the surface is touch dry. The coating can be 

applied to moist stone. Do not apply when the 

temperature is going to drop below 5°C within 

the next 24hrs. The coating is highly durable but 

abrasion will occur on floors or contact areas. 

To re apply to these areas-Thoroughly clean 

the surface and then re apply. If necessary wipe 

over the re treated area to disperse any liquid 

which beads on the surface. Cleaning the coated 

surface. In most instances the surface can be 

cleaned with warm water and a soft brush. Low 

pressure power washers (max 60 bar) can be 

used. For glazed tiles please use LIQUIGLAS ® 

Glass and Ceramic. 

Keep out of the reach of children. Do not drink 

the liquid. If swallowed, seek medical advice 

immediately and show this container and label. 

Do not spray directly on to skin or in the eyes. 

Do not inhale. Use the contents within 6 months 

of opening. Protect the bottled liquid from frost. 

WOOD 

PROTECTION 


430 

STONE 

PROTECTION 


420 

HOLZ 

Durch LiquiGlas® HOLZ erhalten unbehandelte Naturhölzer 

wie z.B. Gartenmöbel aus Holz, Kinderspielzeug oder 

Saunaflächen einen wasser- und schmutzabweisenden UVstabilen 

Oberflächenschutz. Nicht geeignet zur Versiegelung 

von ölendem Holz wie z.B. Teak. 

Art. Nr. 430 

250ml (für bis zu 10m²) 


EAN Code 4260168444306 

STEIN 

Mit LiquiGlas® STEIN erhalten sämtliche porösen 

Untergründe einen langlebigen Witterungsschutz, z. B. 

Sandsteine, Naturwerksteine, Betonsteine, Terrakotta, 

Tonziegeln uvm. 

Art. Nr. 420 

250ml (für bis zu 10m²) 


EAN Code 4260168444207 

EDELSTAHL / ALUMINIUM 

LiquiGlas® EDELSTAHL ist ein anwendungsfertiges Produkt, 

das für Oberflächen aus Edelstahl im Küchenbereich, wie z.B. 

Dunstabzugshauben, Are surfaces coated with optimiert LIQUIGLAS ist. Erleichtert die Reinigung 


welcome to the world of SiO 2 Liquid Glass, nano layering technology. The product which you have 









No, we offer“easy clean” technology. LIQUIGLAS ® has non-stick characteristics; similar to pans 



von Verschmutzungen Every environment is different und as some living spaces Wasserflecken. 

encounter heavy usage whilst others encoun- 

ter far less “wear and tear.” The treatments are all very durable and they will last for many months 

or even years. we expect the hard surface coatings to last for at least 6 months in domestic 

environments. 

why can´t you see our treatment? 



coatings. 



2 



So how does the nano coating work and what are the benefits? 

The liquid glass coating is a highly durable, flexible, super Art. smooth, breathable Nr. and Super 470 Phobic 

coating (=repels oil , water, and dry soiling). Dry dirt will not stick to treated surface. Most 

significantly, almost all treated surfaces can be cleaned with water alone. This means that in most 

instances environmentally damaging cleaning chemicals are not needed. 

When is the surface sufficiently coated? Set, Inhalt: 


across the area. work quickly and in in a methodical manner. Over application results in a visble 

deposit which can be buffed off. 3 Vorreinigungstücher 100 x 140mm 

How do I clean brushed stainless steel? 

Brushed stainless steel is often used for oven hoods, oven hobs and microwaves. During the 

manufacturing process a thin oily deposit is often left in place. Thorough cleaning is required in 

order to remove this coating. A micro-fibre cloth and 3 a suitable Veredelungstücher detergent can be used prior to 100 x 140mm 

deep cleaning with the LIQUIGLAS 

(je Tuch für bis zu 1m²) 


EAN Code 4260168444702 


® cleaning wipe. 

Does the coating prevent the appearance of finger prints? 

The LIQUIGLAS ® coatings will not prevent finger prints from appearing on a surface but the finger 

prints are easily removed with a micro-fibre and warm water. 

Do I need to wipe the surface with a dry cloth after cleaning? 

To attain an “as good as new” appearance it is advisable wipe the surface with a dry cloth as this 

will remove water marks. 

Should I use a scourer to clean coated surfaces? 

Scouring agents and scouring pads will remove the coating. 

Should I use warm water or cold water to clean the surface? 

Cold water can be used but warm water will enhance the removal of fats and cooking deposits. It 

is advisable to let the water soften baked on cooking deposits before cleaning the surface. 

Is the coating suitable for all aluminium and stainless steel? 

It is important to note that occasionally aluminium is coated with a lacquer and so bonding to 

such surfaces may be less efficient (the LIQUIGLAS ® The beading effect has disappeared or become weaker - why? 


to re expose the surface. wiping with pre cleaner or an alcohol cleaner will also rejuvenate the 

coating. 

StainleSS Steel / 





aluminium 


Protection 

Suitable for coating stainless steel and aluminium in most environments. 

Plastic, art. no. 447 should be used for these 

surfaces). Some stainless steel is highly polished. Optimal bonding to such surfaces can also be 

difficult to attain. 



Are the LIQUIGLAS ® coatings Dermatologically tested? 









Our technology is recognised as being of great significance in the battle to protect our planet. 






and found it good, we may publish it on our website. we will be pleased to forward a sample items 


contents: 



3 treatment wipes 100 x 140mm (2 m² per wipe) 

470 

Contents: 

2 pre-cleaning wipes 160 x 220 mm 

2 treatment wipes 160 x 220 mm 

(1 wipe is sufficient for 2 baking sheets 

or for the interior surfaces of the oven) 


450 

How LIQUI- 

GLAS ® works. 

Under a microscope most 

surfaces are very rough and 

look like mountain ranges. Dirt 

and bacteria normally cling to these 

surfaces. Traditional cleaners, which are 

often environmentally damaging, fail to fully 

remove the dirt or they apply a coating on top 

of the dirt which makes the surface look clean. 

LIQUIGLAS ® coats 

these “mountains” with 

pure, nano scale particle 

free glass, which is 500 

times thinner than a 

human hair. The newly 

coated surface is superphobic 

and so rejects 

soiling agents. Amazingly 

this coating is breathable, flexible yet super 

durable. The coating is environmentally friendly 

as it is created from quartz sand. Additionally 

the coatings can be cleaned with water which 

reduces the use of harmful chemicals.Your cleaning 

costs are also reduced! 

weatherproof 


Hydrophobic (water 

repellent) 


repellant 

food safe 





undetectable 


chemicals 



organisations 


technology 



A.L.G.T. ® 

How LIQUI- 

GLAS ® works. 

Under a microscope most 

surfaces are very rough and 

look like mountain ranges. Dirt 

and bacteria normally cling to these 

surfaces. Traditional cleaners, which are 

often environmentally damaging, fail to fully 

remove the dirt or they apply a coating on top 

of the dirt which makes the surface look clean. 

LIQUIGLAS ® coats these 

“mountains” with pure, 

nano scale particle free 

glass, which is 500 times 

thinner than a human hair. 

The newly coated surface 

is super-phobic and so 

rejects soiling agents. 

Amazingly this coating is 

breathable, flexible yet super durable. The coating 

is environmentally friendly as it is created 

from quartz sand. Additionally the coatings can 

be cleaned with water which reduces the use 

of harmful chemicals.Your cleaning costs are 

also reduced! 



repellant 

food safe 





undetectable 


-150°C to +450°C 


chemicals 



organisations 


technology 


OVEN / BARBECUE 

PROTECTION 

Ideal for use on oven, grill and baking tin surfaces. 


A.L.G.T. ® 

Welcome to the world of SiO Liquid Glass, nano layering technology. The product which 

2 

you have before you offers truly stunning characteristics. 



A nanometer is a unit of measurement.1nm (nanometer) is one billionth of a metre. The 

name “Nano” comes from the Greek “Nanos” which means dwarf. 


No. Our coatings are recognised as being particle free. Our technology is based on 

molecular SiO , which is created via an adaptation of the Sol-Gel process. 

2 



500 times thinner than the a human hair and you need to use an electron 

microscope to see the coatings. 


This truly amazing product contains pure, particle free, SiO (Silicon Dioxide) which means 

2 

that it contains “pure glass”. The glass is in a molecular form and is held in a liquid; it does 

not become “glass” until it is allowed to dry. The glass in windows is not pure! 


The liquid glass coating is a highly durable, fl exible, super smooth, breathable and Super 

Phobic coating (=repels oil , water, and dry soiling). Dry dirt will not stick to treated 

surface as each fi lament of every fi bre is protected with a nano scale layer of glass. Most 

signifi cantly, almost all treated surfaces can be cleaned with water alone. This means that in 

most instances environmentally damaging cleaning chemicals are not needed. 


After applying the coating to the surface ensure that the whole of the surface is coated 

by working across the area.Work quickly and in in a methodical manner. Over application 

results in a visble deposit which can be buffed off. 

Can I apply LIQUIGLAS ® to my micro-wave? 

The coating can be applied to microwave surfaces. 

Can I use the oven treatment on Ceran hobs? 

Yes, but LIQUIGLAS ® Glass and Ceramics (art. no. 401 & 405) offers the best bond to 

Ceran surfaces. 

If I treat my baking tray will particles of the liquid transfer into my food? 

The coating conforms to food safety regulations EU-VO 1935 / 2004 

Can I treat my deep fryer? 

The coating can be used but the unit should be cleaned after use. 

Can the coating be used on self cleaning ovens? 

Some self cleaning ovens work at temperatures which exceed the 450°C working 

temperature of LIQUIGLAS ® .Please check manufacturers instructions. Most ovens have a 

maximum working temperature of approximately 300°C. 

Do I need to clean the oven on a regular basis? 

When possible you are advised to clean the oven after use as this will prevent build up and 

“bake-on” of cooking spills. This will make cleaning quicker and easier. 

OFEN / GRILL 

LiquiGlas® BACKOFEN UND GRILL verhindert das 

Einbrennen von Speiseresten im Backofen und Grill, an 

Kuchenformen etc. Leichtes und müheloses Reinigen z. B. der 

How do I clean my oven? 

In most instances you can use warm water and a microfi bre to clean the oven. 

The surface may need to be wiped over several times to moisten the food deposits. 

Backofenoberfläche. 

Non abrasive cleaning products can be used to assist with the removal of very stubborn 

baked on fat deposits. 

Should I use scouring pads? 

The use of scouring pads will dramatically reduce the life of the coating. 


No, we offer “easy clean” technology. LIQUIGLAS ® has non-stick characteristics; similar to 

pans which are coated with non stick coatings. 


Every environment is different as some living spaces encounter heavy usage whilst others 

encounter far less “wear and tear.” The treatments are all very durable and they will last 

for many months or even years. We expect the hard surface coatings to last for at least 6 

months in domestic environments. 


Either the coating has worn away after prolonged use or the surface needs to be cleaned 

in order to re expose the surface. Wiping with pre cleaner or an alcohol cleaner will also 

rejuvenate the coating. 

Are the LIQUIGLAS ® coatings “food safe”? 

Art. Nr. 450 

Set, Inhalt: 

2 Vorreinigungstücher All of our coatings have been 160 tested by independent x 220mm 

agencies and are food safe. 



(ein Tuch ist ausreichend für ein Backblech 

oder den Backofeninnenraum eines haushaltsüblichen Ofens) 


EAN Code 4260168444504 

® coatings dermatologically tested? 





Liquid Glass bonds to most surfaces via quantum forces. The coatings can’t be applied to 

oily woods, hybrid stone mixtures or non stick surfaces. There are no glues, resins or other 

chemicals within this product. 


Our technology is recognised as being of great signifi cance in the battle to protect our 

planet. 


It should be remembered that in most instances treated surfaces can be cleaned with 

water alone this means that a vast amount of POPs (Persistent Organic Pollutants) such as 

detergents can be withdrawn from sale. 

Can calcium deposits be removed more easily from a surface coated with LIQUIGLAS ® ? 

Laboratory tests show that calcium deposits can be removed from a coated glass plate with 

one fi fth of the energy normally needed to remove scale from an uncoated sample. Warm 



and found it good, we may publish it on our website. We will be pleased to forward 

a sample items of a new QLG coating to any person who has their comments published on 

our web page. For more information, visit www.liqui-glas.com 

WOOD 

The LiquiGlas® WOOD coating is for untreated „natural“ 

wood, e.g. natural wooden garden furniture, toys, sauna areas, 

ornamental items. Not suitable for coating oily wood such as 

teak. 

Art. No. 430 

250ml (for up to 10m²) 


EAN Code 4260168444306 

STONE 

The LiquiGlas® STONE coating protects stone surfaces with 

a super durable, breathable and undetectable glass coating 

.This easy to apply coating protects against soiling, moisture, 

abrasion, algae and the negative effects of weathering. 

Art. No. 420 

250ml (for up to 10m²) 


EAN Code 4260168444207 

STAINLESS STEEL / ALUMINIUM 

LiquiGlas® STAINLESS STEEL is a product 

optimized for application on stainless steel and aluminium 

surfaces. 

Easy-to-clean surfaces are created in minutes. This coating 

makes the removal of dirt, fi nger marks and water stains very 

straight forward. 

Art. No. 470 

Kit, content: 



(coverage for up to 1m²) 


EAN Code 4260168444702 

OVEN / BARBECUE 

LiquiGlas® OVEN AND BARBECUE prevents food particles 

from becoming fully bonded to oven, grill and baking tin 

surfaces etc., creates an easy-to-clean surface. Coated surfaces 

can be cleaned with water alone, stainless steel surfaces retain 

an “as good as new “ appearance. 

Art. No. 450 

Kit, content: 



(1 wipe is sufficient for 2 baking sheets 

or for the interior surfaces of a small oven) 


EAN Code 4260168444504

HÄUFIG GESTELLTE FRAGEN / FAQS 

Was bedeutet eigentlich Nano? 

Nano ist eine Maßeinheit. 1nm (Nanometer) ist ein millionstel Millimeter. 

Der Name Nano kommt aus dem Griechischen und bedeutet Zwerg. 

Enthalten die Flüssigkeiten Partikel, deren Auswirkungen auf den Körper 

noch nicht vollständig erforscht sind? 

Nein, wir erzeugen unsere ultradünnen SiO 2 (=Glas) Schichten durch 

einen „nass-chemischen“ Prozess, den man auch „Sol-Gel-Prozess“ nennt. 

Warum kann man die Beschichtung nicht sehen? 

Unsere dünnsten Beschichtungen sind ungefähr 100nm (Nanometer) 

dünn, also ca. 500 x dünner als ein menschliches Haar, liegen unter dem 

Wellenbereich des Lichts und werden deshalb nicht wahrgenommen. 

Woraus besteht das Flüssigglas-Produkt also genau? 

Dieses wirklich erstaunliche Produkt enthält reines partikel-freies SiO 2 

(Silizium-Dioxid), also „reines Glas“, das in der Flüssigkeit enthalten ist. Es 

wird so lange nicht zu Glas, bis es nach dem Aufsprühen trocknen kann. 

Selbst eine Glasscheibe ist kein so reines Glas wie dieses Produkt! 

Was sind die Eigenschaften und Vorteile der Flüssigglas-Beschichtung? 

Die Flüssigglas-Beschichtung ist sehr langlebig, fl exibel, atmungsaktiv und 

macht die Oberfl äche sehr glatt. Sie ist „super phobic“, das heißt wirksam 

gegen Wasser und Öl. Trockener Schmutz haftet nicht und Flüssigkeiten 

wie z.B. Rotwein oder Kaffee können etwa bei Textilien nicht in die Faser 

eindringen. Das Wichtigste ist aber, dass veredelte Oberfl ächen nur noch 

mit Wasser gereinigt werden können und keine chemischen Reiniger 

mehr benötigen, die zum großen Teil schädlich für unsere Umwelt sind. 

Wann ist die Oberfl äche ausreichend benetzt? 

Nach Aufbringen der Beschichtungslösung und gleichmäßigem Verreiben 

mit einem sauberen Tuch erkennt man ein Zusammenziehen der 

Beschichtungslösung auf der Oberfl äche. Dies ist ein Anzeichen dafür, 

dass die Oberfl äche ausreichend benetzt ist. 

Was ist zu tun, wenn es bei der Beschichtung zu Fleckenbildung kommt? 

Frische Flecken entfernt man mit einem Tuch. Bereits eingetrocknete 

Flecken können mit einem feuchten Tuch entfernt werden. Bei 

vorschriftsmäßiger Beschichtung wie in der Anwendung beschrieben 

können keine Flecken entstehen. 

Ist die LiquiGlas® Veredlung selbstreinigend? 

Nein, denn es gibt keine selbstreinigenden Oberfl ächen. Die LiquiGlas® 

Veredelung besitzt eine Antihafteigenschaft, wodurch Flüssigkeiten 

abperlen. Dadurch fällt weniger Schmutz an, der außerdem leichter 

entfernt werden kann. Dies erfolgt nach einem ähnlichen Prinzip, wie man 

es von Tefl on ® Pfannen kennt. 

Wie lange ist die Veredelung haltbar? 

Die Veredelung ist sehr lange haltbar, je nach Oberfl äche und 

Beanspruchung viele Monate oder sogar Jahre. 

Der Abperleffekt ist verschwunden bzw. schwächer geworden - was ist 

zu tun? 

Die Oberfl äche ist verschmutzt. In diesem Falle einfach die Fläche mit 

einem alkoholischen Reiniger reinigen, der Abperleffekt ist wieder 

vorhanden. 


A nanometer is a unit of measurement.1nm (nanometer) is one billionth 

of a metre.The name comes from the Greek „Nanos“ which means 

dwarf. 


No. Our coatings are recognised as being particle free. Our technology is 

based on molecular SiO 2 , which is created via an adaptation of the „Sol- 

Gel process“ 

Why can‘t you see our treatment? 

Our thinnest coatings are approximately 100nm thick. This means that 

they are approximately 500 times thinner than a human hair; and you 

need to use an electron microscope to see the coatings. 


This truly amazing product contains pure, particle free, SiO 2 (Silicon 

Dioxide) which means that it contains “pure glass”. The glass is in a 

molecular form and is held in a liquid; it does not become “glass” until it 

is allowed to dry. The glass in windows is not pure! 


The liquid glass coating is a highly durable, fl exible, super smooth, 

breathable and super phobic coating (=repels oil , water, and dry soiling). 

Dry dirt will not stick to treated surface and liquids such as red wine or 

coffee, are unable to penetrate the coating on fabrics as each fi lament of 

every fi bre is protected with a nano scale layer of glass. Most signifi cantly, 

almost all treated surfaces can be cleaned with water alone. This means 

that in most instances environmentally damaging cleaning chemicals are 

not needed. 


After applying the coating to the surface ensure that the whole of the 

surface is coated by working across the area.Work quickly and in a 

methodical manner. Over application results in a visble deposit which can 

be buffed off. 

Can I remove spills and staining? 

Liquid spills can be removed from coated fabrics by mopping with a dry 

tissue. Already dried stains can be removed by sponging with a damp 

cloth. 

Are surfaces coated with LiquiGlas® self cleaning? 

No, because at the moment self cleaning technology is not effi cient, if it 

truly exists. We offer „easy clean“ technology. LiquiGlas® has a nonstick 

characteristics. This is similar to items coated with Tefl on ® . 


Every environment is different as some living spaces encounter heavy 

usage whilst others encounter far less “wear and tear.” The treatments 

are all very durable and they will last for many months or even years. We 

expect the hard surface coatings to last for at least 6 months in domestic 

environments. 


Either the coating has worn away after prolonged use or the surface 

needs to be cleaned in order to re expose the surface. Wiping with pre- 

cleaner or an alcohol cleaner will also rejuvenate the coating. 

7

Was ist zu tun, wenn die Beschichtung tatsächlich beschädigt wurde? 

Beschädigte Stellen können problemlos repariert werden, indem sie 

erneut mit der LiquiGlas® Veredelung behandelt werden wie in der 

Anwendung beschrieben. 

Sind die LiquiGlas® Produkte lebensmittelecht? 

Ja. Alle unsere Produkte sind daraufhin von unabhängigen Laboren 

getestet. 

Sind die LiquiGlas® Produkte hitzebeständig? 

Ja, von -25°C bis 300°C. 

Kann ich die LiquiGlas® Produkte auf allen Oberfl ächen anwenden, für 

die sie gedacht sind? 

Ja. Flüssigglas verbindet sich mit den Oberfl ächen als stabiler 

Oberfl ächenschutz. Es enthält keinen Kleber, Harze oder sonstige 

chemische Inhaltsstoffe. 

Sind die LiquiGlas® Produkte umweltfreundlich? 

Ja. Unsere Technologie ist weltweit anerkannt als bedeutend im Kampf 

zum Erhalt der Erde und die SiO² Technologie hat bereits bereits 

mehrere Umweltpreise internationaler Umweltorganisationen gewonnen. 

Ein Aspekt ist dabei, dass veredelte Oberfl ächen nur noch mit reinem 

Wasser gereinigt werden können und damit weniger chemische Reiniger 

Anwendung fi nden und die Umwelt dadurch erheblich entlastet wird. 

Can the treatments be reapplied? 

Reapplication follows the format used during the initial application 

process; simply make sure that the surface is completely clean, dry and 

free of contaminants such as washing powder residue or detergents. 

Are the LiquiGlas® coatings “food safe”? 

All of our coatings have been tested by independent agencies and are 

food safe. 

Are the LiquiGlas® coatings heat tolerant? 

Liquid glass is stable between temperatures in the range -25°C to 

+300°C. 

Can I apply LiquiGlas® to any surface? 

Liquid glass bonds to most surfaces via quantum forces. The coatings 

can‘t be applied to oily woods, hybrid stone mixtures or non stick 

surfaces. There are no glues, resins or other chemicals within this 

product. 

Are LiquiGlas® products environmentally friendly? 

Our technology is recognised as being of great signifi cance in the battle 

to protect our planet. SiO² technology has won several awards from 

leading “environmental” agencies. It should be remembered that in most 

instances treated surfaces can be cleaned with water alone this means 

that a vast amount of POPs (Persistent Organic Pollutants) such as 

detergents will no longer damage the eco system. 

LiquiGlas® schützt unsere Welt. – LiquiGlas® protecting our world. 

Liquid Glass - Made in Germany 

CCM GmbH 

Creative Chemical Manufacturers 

Diepenbroich 8· D-51491 Overath 

Fon +49 (0) 2206 / 938590-0· Fax +49 (0) 2206 / 938590-99 

www.liqui-glas.com· info@liqui-glas.com

LiquiGlas Flyer - CCM

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?