You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
uk<br />
Porifera is a unique system for cooling powerleds<br />
and other electronic components through aluminium<br />
foam . The unique properties of this aluminium<br />
foam allow for a much higher cooling performance<br />
compared to conventional cooling bodies . LED<br />
light fixtures that make use of Porifera technology<br />
have greater efficiency, made possible through the<br />
following characteristics :<br />
• Large cooling surface : the foam has an extremely high<br />
surface aspect ratio thus creating a large surface within<br />
a small volume. The larger the cooling surface, the more<br />
heat can <strong>be</strong> dissipated.<br />
• Low mass per volume : the aluminium foam is very<br />
thin which brings the great advantage that the heat is<br />
transferred immediately to the environment (air) and is<br />
not first stored in the material itself like in conventional<br />
systems. Such traditional systems have a radiator effect<br />
i.e. the material fully heats up and only then interacts<br />
with its environment. So the thicker the material, the<br />
slower it cools down. The low mass per volume of<br />
Porifera results in a low heat capacity. It reacts almost<br />
instantly to temperature changes which results in very<br />
short transient regimes, making it a very controllable<br />
heat exchanger.<br />
• Porous : the open cell structure allows for a free flow<br />
of air through the mazes of the foam thus securing an<br />
optimal heat exchange with the environment.<br />
• Isotropic : the interconnected bubbles form a convoluted<br />
path for any gases or liquids flowing through them.<br />
Such a complex path continually brings the gases into<br />
contact with the metal walls. This results in outstanding<br />
convective heat transfers. An additional advantage of<br />
this isotropic structure is that heat is distributed evenly<br />
in a three-dimensional manner, so the performance is<br />
independent of the direction of the convective flow.<br />
Cooling LED fixtures with Porifera is much more efficient<br />
than cooling with conventional cooling elements thus<br />
providing increased life span as well as improved efficiency.<br />
An LED’s life span and its efficiency are directly correlated<br />
with its junction temperature. This correlation follows<br />
3<br />
2012 • 01<br />
an exponential line i.e. more efficient cooling has an<br />
enormous impact on these factors.<br />
Specifications of Porifera :<br />
• Open cell structure<br />
• Organic structure<br />
• Isotropic<br />
• Aluminium<br />
Porifera is a passive cooling system that brings all the<br />
advantages of an active cooling system without the<br />
downsides : greater efficiency without the need for<br />
maintenance and completely noiseless.<br />
Advantages :<br />
• Longer LED life span<br />
• Improved LED efficiency<br />
• Lower power consumption<br />
• Completely maintenance free<br />
• Noiseless