Autotune kit for power vision

POWER VISION 

Quickest and most powerful flash tuner on the market ❖ Sophisticated, yet 

easy-to-use, 3.5” full-color touch-screen display ❖ Mounts to handlebars with 

integrated Amps 4-hole threaded inserts ❖ Also mounts to most aftermarket 

accessory mounts that feature Amps 4-mounting options ❖ Interface cable 

plugs directly to the bike’s diagnostic connector ❖ NO COMPUTER REQUIRED ❖ Simply select the tune and follow the on-screen prompts to 

flash the bike ❖ Tunes can also be edited directly from the Power Vision ❖ Uses WinPV (Windows PC-based tuning application) ❖ Up to six 

different tunes that can be flashed to the bike are stored ❖ Downloads and stores the stock calibration in case OEM restoration is needed 

❖ Stock calibration can also be saved as an editable copy and used as a starting point ❖ Dynojet preconfigured tunes are preloaded on the 

unit ❖ Identify the bike’s information and automatically sort hundred of applicable, dyno-proven tunes ❖ Load tunes by visiting a tuning shop 

or via email and then load onto the device ❖ All J1850 H-D vehicle data, wide-band air fuel ratio 2 and various calculated channels (including 

MPG instant and trip MPG) are displayed ❖ Fuel trims to optimize fuel curve are calculated and stored by AutoTune Basic and Pro 3 

❖ Diagnostic codes can be checked and 

cleared ❖ Adaptive trims and idle offset 

(with bike running) are featured 

$516.99 

20-00458 

AUTOTUNE KIT FOR POWER VISION 

Plug directly into the Power Vision ❖ Power connector 

and 8mm O2 sensors plug into the bike’s harness 

❖ Real time AFR feedback to the Power Vision is 

provided ❖ Semi-automated fuel corrections ❖ Specify 

what air/fuel ratio to make each rpm and throttle 

position % combination ❖ Adjust cruise for best fuel 

economy ❖ You can also adjust cruise on larger 

throttle openings for peak power ❖ Air/fuel ratios are 

included in the base settings but can be fully adjusted 

when need be ❖ Made in the U.S.A. 

NOTE: Because of possible clearance issues, some aftermarket exhaust systems may require 

modifications or relocation of their sensor bungs. 

DESCRIPTION PART NO. PRICE 

For use with Power Vision PART NO. 20-00458 20-00649 $375.99 

For use with Power Vision PART NO. 20-00458; includes weld-in 18mm bungs 20-00650 383.99 

MODEL & YEAR PART NO. PRICE 

FXS/FXST/FLST 09-11 

(except FLSTC/FLSTN 09-11) 20-9098 $323.99 

FXS/FLST 12 20-00716 322.99 

FLSTC/FLSTN 09-12 20-9292 323.99 

XL 883 09 20-9095 323.99 

XL 883 10-12 20-9619 323.99 

MAKE, MODEL & YEAR PART NO. 

For all H-D models with Delphi ECM 

(except Softails 11) 20-00458 


XL 1200 09 20-9096 $323.99 

XL 1200 10-12 20-9620 323.99 

XR 1200 09 20-9535 323.99 

XR 1200 10-12 20-9621 323.99 

FLHT, FLHX, FLHR, FLTR 09 20-9097 332.99 

FLHT, FLHX, FLHR, FLTR 10-12 20-9622 332.99 

MAKE, MODEL & YEAR PART NO. 

For FXS/FLST 11 20-00459 

20-00649 


For use with Power Vision PART NO. 20-00459 20-00651 $375.99 

For use with Power Vision PART NO. 20-00459; includes weld-in 18mm bungs 20-00652 383.99 

POWER COMMANDER V 

Features fuel and timing control, Rev Xtend and is a reduced size from the PCIII USB ❖ “Warmup” 

fuel adjustment (unit reads engine temp and allows fuel/timing adjustments based on the 

reading) ❖ The Power Commander III USB allowed you to add extra fuel during start-up based 

on “number of revolutions” of the engine ❖ Now the easy-to-install Power Commander V reads 

the exact engine temp through the bike’s own ECM, allowing the tuner to choose how much fuel 

to add ❖ More tuning ranges than PCIII USB ❖ Enhanced “accel pump” utility ❖ USB powered 

from computer; 9 volt adapter is no longer needed ❖ Cold starting on heavily modified engines 

should now be much more controllable and easy to adjust ❖ Software displays J1850 data from 

20-9095 

bikes’ stock ECU ❖ Two-position map switching function built in ❖ Can add any SPST switch and 

toggle between two different fuel/timing maps ❖ Gear/speed input allows for map adjustment 

based on gear ❖ Analog input allows user to install any 0-5 volt sensor ❖ Build an adjustment 

table based on analog input such as boost or temperature ❖ Power Commander V is capable of allowing each cylinder to be mapped 

individually and for each gear with the gear position input connected ❖ Ten throttle position columns ❖ Made in the U.S.A. 


Dyna 09 20-9099 $323.99 

Dyna 10-11 20-9624 323.99 

Dyna 12 20-00717 322.99 

V-Rod 09-11 (all) 20-9100 323.99 

V-Rod 12 (all) 20-00718 322.99 

Buell 1125R/CR 08-09 20-9738 323.99 

New Part Nos. ORDERING & 

TECHNICAL 

in DARK BLUE CUSTOMER SERVICE 800-969-7503 SUPPORT320-358-1914 

www.denniskirk.com 

481 

F 

U 

E 

L 

/ 

I 

N 

T 

A 

K 

E

F 

U 

E 

L 

/ 

I 

N 

T 

A 

K 

E 

AUTOMATIC TUNE KITS 

Feature O2 sensors that automatically adjust the Power Commander V 

NOTE: Because of possible clearance issues, some aftermarket systems may require 

modifications or relocation of their sensor bung. 


Touring models 10-11 20-9618 $357.99 

All EFI models 09-11 (exc. Touring 10-11) 20-9113 347.99 

482 

20-9113 

POWER COMMANDER III USB 

Use of the USB (Universal Serial Bus) port connection 

provides an immediate, problem-free connection from your 

20-0854 

Power Commander to a computer ❖ Perfect for fine-tuning fuelinjected 

motorcycles when changing air filters, exhaust systems, 

or doing additional engine performance modifications ❖ Each Power 

Commander unit has a built-in microprocessor and comes with a 

specific map designed to improve engine performance over stock 

❖ If you do not have a computer, simply change the settings with the 

three touch buttons on the faceplate ❖ Includes OEM-style wiring harness 

connectors that have improved harness protection; no modifications required 

❖ Easy-to-follow instructions provided ❖ Power Commander III USB uses direct injector control technology to control the fuel curve for 

models that do not have sensors that allow sufficient fuel adjustment ❖ Power Commander III USB also includes an expansion port to 

incorporate future add-on modules from Dynojet ❖ Dynojet is continuously mapping different combinations for each bike; the special maps 

can be downloaded at Dynojet’s website (www.powercommander.com) ❖ PCIII USB software is compatible with Windows 98 and newer; opens 

all maps with .djm extension ❖ Includes USB communications cable and 9V power adapter ❖ Made in the U.S.A. 


All EFI Evolution Touring 97-98 20-0858 $314.99 

All EFI Twin Cam Touring 99-01 20-0855 314.99 

All EFI Twin Cam Touring 02-06 20-0854 314.99 

All Twin Cam Touring 07 w/ oxygen sensor eliminators 20-1976 323.99 

All Twin Cam Touring 08 w/ oxygen sensor eliminators 20-2462 332.99 

All EFI Softail 01-06 20-0856 314.99 

All Softail 07-08 w/ oxygen sensor eliminators (except FXCW/C) 20-1977 323.99 

V-Rod 02-06 (all) 20-0857 314.99 

CALIFORNIA A.R.B. APPROVED POWER COMMANDER III USB-EX 

Virtually the same tuning function as the original Power Commander III USB provided 

❖ Works with Tuning Link software ❖ Custom maps, fuel and ignition mapping and full 

fuel adjustability can be created ❖ Ignition timing changes of up to +/- 10° also possible 

❖ Maps created for Power Commander III USB can be loaded and will automatically be 

converted to the proper format ❖ Can work with any exhaust system ❖ Horsepower and 

torque will be increased 


Twin Cam Touring 08 20-8865 $332.99 

Twin Cam Touring 07 20-2213 1 323.99 

EFI Twin Cam Touring 02-06 20-2219 314.99 

EFI Twin Cam Touring 99-01 20-2222 314.99 

EFI Evolution Touring models 97-98 20-2225 314.99 

Softails 07-08 (except FXCW/C) 20-2214 1 323.99 

EFI Softails 01-06 20-2220 314.99 

V-Rod 08 (all) 20-8866 323.99 

DESCRIPTION PART NO. 

LCD display for Power Commander III USB 20-2052 


FXS/FLST 11 w/ CAN-bus connector 20-00719 $347.99 

FXS/FLST 11 w/ CAN-bus connector 20-00720 357.99 


V-Rod 07 (all) 20-1981 $323.99 

V-Rod 08 (all) 20-2463 323.99 

All EFI Dyna 04-05 20-0859 323.99 

Dyna 06 w/ oxygen sensor eliminators 20-1600 323.99 

Dyna 07-08 w/ oxygen sensor eliminators 20-1978 323.99 

XL 883 07-08 w/ oxygen sensor eliminators 20-1980 323.99 

XL 1200 07-08 w/ oxygen sensor eliminators 20-1979 323.99 

20-8865 


V-Rod 07 (all) 20-2218 $314.99 

V-Rod 02-06 (all) 20-2223 314.99 

Dyna 07-08 20-22151 323.99 

Dyna 06 20-2221 323.99 

Dyna 04-05 20-2224 314.99 

XL883 07-08 20-2217 323.99 

XL1200 07-08 

1 W/ oxygen sensor eliminators. 

20-2216 323.99 

LCD DISPLAY ACCESSORY FOR POWER COMMANDER III USB/PC-V 

The “quick-disconnect” cable allows you to connect to any Power Commander USB 

❖ Weatherproof to allow you to keep on your bike at all times ❖ All data from the Power 

Commander is displayed ❖ The on-board memory stores maps which can be sent to PC III/ 

PC-V USB “on the fly” ❖ Maps can also be adjusted using the controls on the display ❖ Logs 

data for later analysis ❖ Includes an SD Memory card slot so the amount of data can be 

increased at any time ❖ Features an Active matrix 16-bit touch-screen TFT LCD 240 x 320 

(1 3 /4” T x 2 3 /8” W) 

$269.99 


LCD display for Power Commander V 20-9240 


TECHNICAL 


www.denniskirk.com

MULTI-FUNCTION HUB ACCESSORY 

FOR POWER COMMANDER III USB 

Allows users to access advanced expansion features ❖ Available with 

a switch or a switch and harness ❖ Harness includes speed, pressure 

input and relay harnesses ❖ The switch allows user to switch between 

two different maps within the PCIII USB ❖ For use with PC III USB/ 

PC III USB EX and LCD display PART NO. 20-2052 


Multi-Function Hub and wiring harness for Map Selection; with Switch and Handlebar bracket only 20-2053 $152.99 

Multi-Function Hub and wiring harness for Map Selection, Gear Position, Speed Sensor, Pressure Input and two relay outputs; with Switch and Handlebar bracket 20-2054 179.99 

17-1374 

20-2053 

17-2251 

POWER PROGRAMMING ADAPTERS 

To power up a Power Commander for changing or altering maps while the Power Commander is disconnected from the vehicle ❖ 110V/220V 

is great for service/parts department applications ❖ Also available in 9V for consumer applications 


PCIII USB power adapter (110V and 220V) 17-2278 $65.99 

PCIII USB power adapter (9V) 17-2251 14.99 

USB international plug adapter kit 17-2279 12.99 

TTS MASTERTUNE KIT 

FOR 01-12 H-D MODELS WITH DELPHI FUEL INJECTION 

Allows you to tune your factory ECM without any add-on 

boxes attached to your motorcycle ❖ Contains three data tuning 

software programs – Mastertune software, Data Master data 

acquisition and VTune self-tuning solutions software ❖ Provides 

detailed data acquisition aids for tuning and troubleshooting 

diagnostics ❖ Can use to change factory rpm limits and speedometer calibration 

❖ Adjusts for different fuel injector flow rates and engine size ❖ Generates 2D and 3D 

graphic tables to help visualize tuning maps and adjustments ❖ Saves settings and can 

restore the bike back to factory specifications ❖ Includes more than 20 pre-generated 

data tables and parameters for optimizing the ECM including fuel-air mixture and timing 


Master Tune kit, single bike 20-00218 $424.99 

Master Tune kit, dual bike 20-00219 624.99 

WILD THINGS 

FUEL INJECTION CONTROLLER 

FOR EVOLUTION/TWIN CAM WITH FUEL INJECTION 95-05 

17-2278 

Easy, affordable way to tune your fuel-injection system ❖ Loadbased 

fuel-injection controller reads throttle position, rpm and 

takes into account the load on the engine ❖ Four separate “pot” 

controls let you fine-tune for the best performance ❖ Green “pot” 

functions like the fuel mixture screw and pilot jet, adjusts light 

throttle operation like highway cruising and steady throttle ❖ Yellow “pot” functions 

like the accelerator pump, adding fuel as the throttle is opened ❖ Red “pot” functions 

like the main jet, adding fuel on the top end ❖ The rpm “pot” adjusts at what rpm 

the green and yellow “pots” stop adding fuel and the red “pot” takes over ❖ All four 

can be independently adjusted to compensate for engine modifications, high-flow air 

cleaners or performance exhaust systems ❖ Compatible with all 95-05 models with 

fuel injection ❖ Plugs into stock wiring harness without cutting or splicing ❖ Designed 

by Dobeck Performance 

17-2279 


Serial 110V professional (U.S.) power adapter 17-1374 $75.99 

RFI special cable for USB operation 20-0867 37.99 

20-00218 


Serial cable 20-00220 $34.99 

USB cable 20-00221 78.99 

$228.99 

20-2054 

20-0867 

PART NO. 20-1494 


TECHNICAL 



483 

F 

U 

E 

L 

/ 

I 

N 

T 

A 

K 

E

F 

U 

E 

L 

/ 

I 

N 

T 

A 

K 

E 

Fi2000 POWRPRO 

WITH CVT TECHNOLOGY 

New patented technology unlike any other 

system on the market ❖ Provides perfect 

acceleration fuel settings in any condition, 

with any exhaust system with any engine modifications ❖ CVT – Continuously Variable Tuning is the key to 

the remarkable performance the Fi2000 PowrPro delivers ❖ Advanced technology – uses electronic control 

technology that calculates the rate of acceleration by reading crankshaft rotation at the flywheel and changes in 

load just as a dynamometer measures acceleration at the rear wheel ❖ Measures and adjusts fuel flow during 

acceleration to the injectors in microseconds for super-fast fuel tuning – continuously and automatically; this 

equals a net result of precise EFI tuning, in the real world in real time, nonstop, up to 80 times per second 

❖ PowrPro tunes to precise air-fuel mixture to create maximum power 80 times per second (does not tune to a predetermined arbitrary AFR) 

❖ Creates that adjustment to maximum power on every squirt of the injector ❖ It’s like having the best custom map writing, dyno operator 

tuning your fuel every time you crank the throttle ❖ Tunes every gear, every roll on, every environmental change, every engine mod, lugging 

the engine, winding it out to redline: it reacts, verifies, and adjusts when the bike is accelerating ❖ No matter what kind of new hardware 

you install on your bike – a new exhaust system, a freer-flowing air filter setup or even a big-bore hop-up kit with high-performance cams, 

PowrPro continues to analyze and tune your engine for peak performance ❖ No external adjustments needed; no dyno needed; no additional 

components needed ❖ Does not require wide band oxygen sensors 

NOTE: Not legal for operation on public highways in the state of California. 


FXCW/FXCWC 08-11 20-00199 

FXS/FLST 12 20-00713 

FXS/FXST/FLST 08-11 (all) 20-00202 

FXST/FLST 07 (all) 20-00195 

FXST/FLST 06 20-00193 

Fi2000R O2 FUEL PROCESSORS 

Closed-loop Fi2000R O2 digital fuel processor is 

designed to work with all exhaust systems on the market 

today that are equipped with oxygen sensors ❖ Fi2000R 

20-2005 

optimizes stock lean air/fuel mixtures while increasing 

horsepower and torque while cooling engine temps ❖ Work virtually the same as a carburetor jet kit by 

having adjustments similar to the air-mixture screw, the needle and clip positions and the main jet 

❖ No computer downloads or dyno testing needed ❖ Installation is easy with the plug-and-ride 

technology and OEM-style connectors ❖ Pre-configured from the factory but adjustments are fast and 

easy if your application should require 

❖ Improve overall rideability and virtually eliminate 

backfiring on deceleration 

DESCRIPTION STANDARD PART NO. CALIFORNIA LEGAL PART NO. 

FXS/FLST 12 20-00714 20-00710 

FXS/FXST/FLST 08-11 (all) 20-9284 20-2481 

FXST/FLST 07 (all) 20-2006 20-2481 

FXCW/FXCWC 08-11 20-2490 20-2486 

Dyna Glide 12 (all) 20-00712 20-00709 

Dyna Glide 08-11 (all) 20-9283 20-2480 

Dyna Glide 07 (all) 20-2005 20-2480 

484 


FXST/FLST 01-05, Dyna Glide 04-05 20-00194 

FLHT, FLHR, FLTR, FLHX 10-12 (all) 20-00203 


FLHT, FLHR, FLTR, FLHX 07 (all) 20-00196 

FLHT, FLHR, FLTR, FLHX 06 (all) 20-00192 

NOTE: Standard models not legal for operation on public highways in the state of California. 

17-2523 

$569.99 

$265.99 

DESCRIPTION STANDARD PART NO. CALIFORNIA LEGAL PART NO. 

Dyna Glide 06 (all) 20-2038 20-2484 

FLHT, FLHR, FLTR, FLHX 10-12 (all) 20-9664 20-9665 

FLHT, FLHR, FLTR, FLHX 08-09 (all) 20-2497 20-2499 

FLHT, FLHR, FLTR, FLHX 07 (all) 20-2008 20-2483 

XL 07-12 (all) 20-2010 20-2488 

V-Rod 12 (all) 20-00797 20-00795 

V-Rod 08-11 (all) 20-8580 20-8581 

Fi2000R PLUG-IN FUEL PROCESSORS 

FOR FUEL-INJECTED MODELS 

Proven Fi2000 now comes with more advanced tuning options for modified bikes ❖ Step-by-step 

instructions ❖ Clip into fuel-injection and go with leads that snap directly into the bike’s injector 

bodies ❖ Open-loop design; elminates O2 sensors on models that come standard with them 

(O2 sensor eliminators included) ❖ Third tuning pot can be thought of as an electronic main jet ❖ Air/fuel mixture problems are eliminated 

along with backfiring when decelerating ❖ Ten settings of fuel adjustments (0-10 settings) ❖ Three lights offer great identity to each mixture: 

green – air/fuel ratio 14:1; green and yellow – air/fuel mixture 12.5:1; red – air/fuel mixture 12.8:1 ❖ Give a better ride by smoothing out 

the powerband and throttle response ❖ Easy to use with 

no downloads or map adjustments required 

NOTE: Standard models not legal for operation on public highways in the state of California. 

❖ Water-resistant circuit board 

$237.99 

MODEL & YEAR STANDARD PART NO. CALIFORNIA LEGAL PART NO. 

For FXST/FLST 01-05, Dyna 04-05 17-2523 20-2478 

For FXST/FLST 06 20-1553 20-2477 

For FXS/FXST/FLST 07-11 and Dyna 06-11 20-2004 - 

For FLHT, FLHR, FLTR models 95-05 17-2521 20-2474 

For FLHT, FLHR, FLTR, FLHX 06 20-1551 20-2476 

For FLHT, FLHR, FLTR, FLHX models 07 20-2007 - 

For FLHT, FLHR, FLTR, FLHX models 08-09 20-2496 - 



Dyna Glide 12 20-00711 

Dyna Glide 08-11 (all) 20-00198 

Dyna Glide 07 (all) 20-00205 

Dyna Glide 06 (all) 20-00197 


XL 07-12 (all) 20-00204 

V-Rod 12 (all) 20-00796 

V-Rod 08-11 (all) 20-00201 

V-Rod 02-07 (all) 20-00191 

MODEL & YEAR STANDARD PART NO. CALIFORNIA LEGAL PART NO. 

For FXCW/FXCWC 08-11 20-24891 - 

For XL models 07-12 (all) 20-2009 - 

For V-Rod 08-12 (all) 20-8578 - 

For V-Rod 02-07 (all) 17-2522 20-2475 

Repl. O2 Sensor Eliminator kit for H-D 06-10 20-20722 20-20722 1 PRICE $265.99. 

2 PRICE $33.99. 


TECHNICAL 


www.denniskirk.com

The Vance & Hines 

FuelPak is five-star 

rated. Scan the 

QR Code to 

read over 150 

reviews and watch 

installation and 

programming 

videos. 

FUELPAK 

Available in original version which is not legal for sale in CA or new California A.R.B approved version with all 

the same features as the original ❖ System is based on the throttle position sensor; simplifies the process of fuel injection tuning 

❖ Fine-tune the fuel mixture with the touch of a button ❖ Improves throttle response and increases power ❖ Easy to use; no software 

required ❖ Supplied values are to be used with Vance & Hines exhaust systems; contact V&H tech support for use with other systems 

❖ Includes all mounting hardware ❖ For fuel-injected models only ❖ Made in the U.S.A. 

NOTE: Not legal for sale or use on pollution controlled vehicles (Original Fuelpak). NOTE: EO #D-632-1 (C.A.R.B. approved Fuelpak). 

NOTE: Requires use of a high-performance air filter. Not for use with Screamin’ Eagle Stage 2 chip. 


ORIGINAL FUELPAK FOR 49-STATE USE 

FXCW/C 08-11, FLSTSB 08-11 61-8921 $251.99 

Softail 01-11 (except FXST/B/C/SSE 07-10, FLSTF 07-11, FLSTSB 08-11, 

FXCW/C 08-11) 20-2194 251.99 

Dyna 04-11 and V-Rod 02-11, XR1200/X 09-11 20-2196 251.99 

FLHT, FLHR, FLHX, FLTR 11 20-00575 251.99 

FLHT, FLHR, FLHX, FLTR 08-10 20-8517 251.99 


XL 10-11 20-9659 251.99 

XL 07-09, FXST/B/C/SSE 07-10, FLSTF 07-11 20-2472 251.99 

THROTTLEPAK THROTTLE MANAGEMENT SYSTEM 

FOR FLHR, FLHT, FLHX, FLTR, FLHTCUTG, FLHXXX 08-11 

Brings back the quick throttle response that is lost in throttle by wire (TBW) ❖ One twist of the throttle 

and you will notice the improved response and acceleration ❖ Works on any bike’s configuration; stock, modified and any exhaust 

combination ❖ Possibly the easiest performance mod ever; installs in minutes, simply plug into factory connectors ❖ Made in the U.S.A. 

$197.99 PART NO. 20-00579 

TERMINAL VELOCITY III FUEL MANAGEMENT SYSTEMS 

Maximize performance, increase horsepower and torque while decreasing emissions and 

fuel consumption ❖ Adjusts as you ride, compensates for changes in engine load conditions 

❖ Automatically recalibrates for modifications made to the motorcycle such as aftermarket 

exhaust, air cleaner, etc. ❖ Available for Delphi, Magneti Marelli ECU systems and 08-09 

throttle-by-wire models ❖ Works in conjunction with the factory closed-loop system; some 

applications use factory O2 sensors (see chart), other applications include O2 sensor ❖ Features 

quick-connect plugs for easy installation ❖ No manual adjustments required – tamper-proof 

surface mount design ❖ Does not require dyno time for adjustment ❖ Works with factory and race tuner downloads ❖ Made in the U.S.A. 

NOTE: Standard models not for sale or use on California emission-equipped motorcycles. NOTE: C.A.R.B. EO #D-655. 


STANDARD 

For FXD, FXDWG 12, FXS/FLST 12 with flat TPS plug, uses factory O 2 sensors (3-pin) 20-00734 

For V-Rod 12 models with flat TPS plug, uses factory O 2 sensors (3-pin) 20-00735 

EFI POWER PROGRAMMER 

FOR XR1200/1200X 09-11 

Pre-programmed – just plug in and select whichever mode suits your riding style ❖ Plugs into 

existing wiring using stock connectors; professional installation recommended ❖ Load-sensitive, 

unlike many other fuel-injection programmers ❖ No laptop or software required 

NOTE: Professional installation is recommended. 

$341.99 

PART NO. 20-00449 

20-2472 


CALIFORNIA A.R.B. APPROVED 

FXCW/C 08-11, FLSTSB 08-11 20-9061 $251.99 

Softail 01-11 (except FXST/B/C/SSE 07-10, FLSTF 07-11, FLSTSB 08-11, 

FXCW/C 08-11) 20-9056 251.99 

Dyna and V-Rod 07-08 20-9058 251.99 



XL 07-09, FXST/B/C/SSE 07-10, FLSTF 07-11 20-9059 251.99 

$379.99 


CALIFORNIA 

For FXD, FXDWG 12, FXS/FLST 12 with flat TPS plug, uses factory O 2 sensors (3-pin) 20-00736 

For V-Rod 12 models with flat TPS plug, uses factory O 2 sensors (3-pin) 20-00737 


TECHNICAL 



485 

F 

U 

E 

L 

/ 

I 

N 

T 

A 

K 

E

F 

U 

E 

L 

/ 

I 

N 

T 

A 

K 

E 

NOTE: Because of possible clearance issues, some aftermarket exhaust systems 

may require modifications or relocation of their O 2 sensor port bungs. 

NOTE: C.A.R.B. EO #s D-644, K-001, K-001-1, K-001-2. 

486 

THUNDERMAX 50 ARB-LEGAL AUTO-TUNE MODULE 

FOR BIG TWIN 01-10 MODELS WITH DELPHI EFI (ALL EXCEPT FLHR/FLHT/FLHX/FLTR 08-10) 

Complete replacement engine management system is California ARB-legal (Executive Order #D-644) 

❖ Converts these open-loop EFI bikes to a feedback system that automatically corrects air fuel ratios 

through the use of wide-band oxygen sensors and the ThunderMax AutoTune module which allows 

continuous AFR tuning, keeping the engine at the specified air fuel ratio regardless of the changes in 

ambient conditions or terrain ❖ Boosts torque and power over the stock system, maintains excellent fuel 

economy and self-tunes aftermarket exhaust systems ❖ Rev limiter is adjustable ❖ Features access to 

read vehicle diagnostic trouble codes 

20-2049 


THUNDERMAX ECM 

FXST 01-10, FLT, FLHT 02-07 20-2049 $899.95 

FLHR/FLHT/FLHX/FLTR 08-12 (10-12 models require the use of 09 header pipes 

w/ 18mm sensor bungs or modify 10-12 header pipes to accept 18mm sensors) 20-9076 989.95 

V-Rod 02-12 (all) 20-9019 899.95 

XL 07-09 (all except XR1200) 20-2451 899.95 

$899.95 

PART NO. 20-9656 

THUNDERMAX ECM WITH AUTO-TUNE CLOSED LOOP SYSTEM 

Self-adjusting system combines the benefits of the ThunderMax ECM and the Auto-Tune Module for optimum performance ❖ Mount the 

ThunderMax ECM with Auto-Tune module in place of the factory ECM – it plugs into the existing harness ❖ Auto-Tune adjusts itself for 

component and exhaust changes – just install the new parts, download a map, and ride ❖ System includes ThunderMax ECM and Auto-Tune 

Module, plug-in harness and two wide band sensors, SmartLink Software and communication cable, Quick-Start Easy Install and Basic User’s 

Manual, technical support and free software and updates at 

www.thunder-max.com ❖ Installation on 01-06 models (except 

NOTE: Legal in California only for racing vehicles which may never be used upon a highway. 

Dyna 06) requires installing an additional 02 sensor bung on the exhaust 

THUNDERMAX ECM 

FOR BIG TWIN 01-10 MODELS WITH DELPHI EFI 

(ALL EXCEPT FLHR/FLHT/FLHX/FLTR 08-10) 

Take control of your motorcycle’s EFI by replacing 

the factory ECM ❖ Open-loop system allows you to 

select and install a matching base map and enjoy 

the efficiency of a balanced fuel curve for throttle 

response like you’ve never imagined ❖ Easy plugand-play 

installation; simple adjustable rev limit and 

idle settings and designed to let you easily adjust 

fuel, ignition timing and cold start maps ❖ Versatile – 

plug-and-ride or live-tune a custom application – most 

models will not require extensive dyno time for tuning 

❖ Alpha-N design unaffected by long duration camshafts; minimize, even 

eliminate, that annoying exhaust popping ❖ Includes SmartLink Software and 

cable for easy PC tuning, maps for popular engine combination and Quick-Start 

Easy Install and Basic User’s Manual ❖ Map and software updates available at no 

charge at www.thunder-max.com 

NOTE: Legal in California only for racing vehicles which 

may never be used upon a highway. 

perfect amount of fuel to the 

engine for optimum performance 


For all FLT 08-09 20-8909 $284.99 

For FXST/FLST/FLHT/FLHR/FLTR 06 20-2034 237.99 

20-2051 

$485.95 

PART NO. 20-2047 

BIG SHOT ADJUSTABLE FUEL INJECTION TUNER 

This load-based fuel-injection module does not require splicing or modifications to 

your motorcycle during installation ❖ Superior in design over fuel-injection modules 

that work off throttle position ❖ Pre-loaded with base maps for different models 

which can then be fine tuned to your riding style and bike ❖ Laptops and dyno 

machines not required ❖ Uses the latest load-based technology in fuel-injection 

performance ❖ Detects the exact amount of load on the engine at any rpm and any 

road speed; delivers the 

NOTE: Not legal for operation on public highways in California. 

20-2451 


For Big Twin 95-05 20-2033 $237.99 

For V-Rod 08-09 (all) 20-8910 284.99 


THUNDERMAX ECM (CONT) 

FXD 04-11, FXCW 08-10, FXSTSSE2 09, XL 10-12 (all except XR1200) 20-9917 $919.95 

XR 1200 09-12 20-9654 899.95 

REPLACEMENT OXYGEN SENSOR 

Sold each 20-2051 117.95 

THUNDERMAX 

PIGTAIL HARNESS 

FOR DYNA 01-10, FXCW/C 

08-10 AND VRSC 02-05 

When clearances around the 

ECM are tight, this allows 

a second port for the communication cable connection to 

the ThunderMax ❖ Installs to the bike’s wiring harness at 

the 36-pin ECM connector (connection requires harness 

plug disassembly; two terminated wires are inserted into 

two unused ports in the 36-pin connector, and a ground 

wire added) 

NOTE: Requires ThunderMax ECM with serial number 114000 or higher 

(produced beginning August 2008). Will not work on previous model 

ThunderMax ECM or PART NO. 20-9076 for FLHR, FLHT, FLHTCUTG, FLHX, 

FLHXX, FLTR models 08-12. 

$18.95 PART NO. 20-9020 

20-2033 

20-9076 


For V-Rod 02-07 (all) 20-2036 $237.99 


TECHNICAL 


www.denniskirk.com

PRECISION ENGINE 

MANAGEMENT SYSTEMS 

Just set it up and ride; Precision EMS requires no laptop, no dyno and 

no downloads ❖ Unlike other so-called “self-tuning” controllers, this is 

a true self-optimizing system ❖ Adjusts instantly with little or no further 

adjustment ❖ Most self-tuning controllers get a little better with each ride, 

requiring countless rides for it to “learn” more than two thousand fuel 

cells; Precision EMS factors air/fuel ratio, timing parameters, load and 

temperature ranges and adjusts instantly ❖ Improves the performance of everything from a stock bike to a massive 135” 

❖ Retains and makes use of the stock Delphi ECU ❖ Keeps OEM features and safeguards like ion-sensing knock protection ❖ Engine-loadbased 

timing control ❖ Constantly monitors and adjusts using included wide band O2 sensors ❖ System includes Precision 

EMS controller, two wide-band O2 sensors, ECU shipment box and customer information sheet ❖ Made in the U.S.A. $778.99 

NOTE: ECU will be calibrated by Revolution Performance. Pre-paid, next-day-air package included. NOTE: Not legal for operation on public highways in the state of California. 

MAKE & MODEL PART NO. 

FLST, FXST 07-10 20-00223 

FLST, FXST 04-06 20-00222 1 

FXD, FXDWG 06-10 20-00225 


FXD, FXDWG 04-05 20-00224 1 

FLHT, FLHR, FLTR, FLHX 11 20-00581 2 

FLHT, FLHR, FLTR, FLHX 10 20-00230 2 

NOTE: Pre 07 applications include one O 2 sensor and one O 2 bung. 07-10 applications use factory installed O 2 sensors. 


FLHT, FLHR, FLTR, FLHX 09 20-00229 



SLM FUEL-INJECTION MODULES 

Self-learning module ❖ Compensates for changing loads, weather conditions and altitude 

❖ Automatically re-calibrates and optimizes for modifications such as pipes, air intake and cams ❖ Allows for better 

engine efficiency ❖ Throttle position sensor, crank position sensor and O 2 sensors have direct plug-in connections 

❖ Shock and vibration-proof surface mount with a PCB design that allows for great durability ❖ Improves mileage 

and reduces emissions ❖ Costly dyno tuning sessions or downloading calibration files to a laptop are no longer 

needed ❖ Without having to reflash the factory ECU, simply plug it in and ride 


FXST/FLST 

FXST/FLST 07-10 20-9481 $521.99 

FXST/FLST 05-06 20-9479 626.99 

FXST/FLST 01-04 20-9478 626.99 

FXD/FXDWG 

FXD/FXDWG 06-10 20-9481 521.99 

FXD/FXDWG 05 20-9479 626.99 

FXD/FXDWG 04 20-9478 626.99 

XL 

XL 07-10 20-9480 521.99 


FLHR/FLTR/FLT/FLHT/FLHX 

FLHR/FLTR/FLHT/FLHX 10 20-00017 $521.99 

FLHT/FLHR/FLHX/FLTR 08-09 20-9482 521.99 

FLHT/FLHR/FLHX/FLTR 07 20-9481 521.99 

FLHT/FLHR/FLHX/FLTR 06 20-9479 626.99 

FLHR/FLTR/FLT/FLHT 95-05 20-9478 626.99 

V-ROD 

V-Rod 08-10 20-9480 521.99 

V-Rod 02-07 20-9478 626.99 

FI CONTROLLERS 

Plug-in module offers better engine performance with three selectable base fuel curves ❖ Allows you to 

set your FI to meet a wide variety of needs ❖ Three potentiometers change the fuel curve in the proper 

ranges ❖ Easy installation – uses factory connectors with no PC required for tuning or adjusting the fuel 

curves ❖ No modifications to the stock ECU; removing the FI controller returns vehicle to factory settings 

❖ Won’t interfere with enrich/lean fuel adjustments ❖ Made in the U.S.A. 


FLHT, FLHR, FLHX, FLTR 09 20-9797 $246.99 




FLHT, FLHR, FLTR 02-05 20-1474 236.99 

FLHT, FLHR, FLTR 99-01 20-1473 236.99 

FLHT, FLHR, FLTR 97-98 20-1472 236.99 

Softail 07 20-2492 246.99 

55MM MAXFLOW 

THROTTLE BODIES 

Produces optimal mid- and high-rpm power 

using large plenum design ❖ Designed for 

use with larger cubic inch motors that require more airflow ❖ Fully 

machined and ported internally for increased flow ❖ Stainless steel 

shaft and spring ❖ Sealed double roller bearing delivers smooth 

throttle operation ❖ Brass throttle blade and shaft help maintain 

throttle position accuracy by resisting deflection ❖ Replaces OEM 

throttle body and manifold ❖ Compatible with 


Softail 06 20-2353 $236.99 

Softail 01-05 20-1475 236.99 

Dyna 07 20-2493 246.99 

Dyna 06 20-2354 246.99 

Dyna 04-05 20-1475 236.99 

XL 883 07 20-2494 246.99 

XL 1200 07 20-2495 246.99 

V-Rod 02-05 20-1476 236.99 

$711.99 

20-00223 

OEM components ❖ Made in the U.S.A. DESCRIPTION PART NO. PRICE 

MODEL & YEAR PART NO. 

Twin Cam 06-12 with Delphi EFI (except FLHT, FLHR, FLHX, FLTR, FLHTCUTG, 

FLHXXX 08-12) 20-9643 

Twin Cam 01-05 with Delphi EFI 20-9642 

FOR TWIN CAM 06-12 WITH DELPHI EFI 

(EXCEPT FLHT, FLHR, FLHX, FLTR, 

FLHTCUTG, FLHXXX 08-12) 

51mm 20-9640 $626.99 

55mm 20-9641 626.99 

20-00229 


FLHT, FLHR, FLTR, FLHX 04-06 20-002261 1 04 models require an upgrade to 05-up ECU. 

2 Requires an exhaust system with 18mm 

sensor bungs. 

20-9481 

20-1474 


TECHNICAL 



20-9638 

BIG BORE THROTTLE BODIES 

Fully machined and ported internally to 

deliver unmatched flow ❖ Flow benchtested 

to increase horsepower and torque 

❖ Stainless steel shaft and spring ❖ Sealed 

double roller bearing for smooth throttle operation ❖ Brass throttle 

and shaft offer deflection resistance to maintain throttle position 

accuracy ❖ Replaces OEM throttle body and manifold ❖ Compatible 

with OEM components ❖ Made in the U.S.A. 


FOR TWIN CAM 01-05 WITH DELPHI EFI 

51mm 20-9638 $569.99 

55mm 20-9639 569.99 

487 

F 

U 

E 

L 

/ 

I 

N 

T 

A 

K 

E

F 

U 

E 

L 

/ 

I 

N 

T 

A 

K 

E 

OXYGEN SENSOR 

ELIMINATOR KITS 

20-00256 

20-00407 

AND ACTIVE INTAKE 

AND EXHAUST 

ELIMINATOR KIT 

Allow air/fuel ratio changes for racing 

applications ❖ Active Intake and Exhaust 

Eliminator Kit is used to avoid setting a 

20-00408 

diagnostic trouble code when installing some 

aftermarket air filters and exhaust that require the removal of original 

equipment active systems; for off-road racing use only 

NOTE: Not legal for sale or use on pollution-controlled vehicles. 

DESCRIPTION 

OXYGEN SENSOR ELIMINATOR KITS 

PART NO. PRICE 

All 06-11 models (except FLHR/FLHT/FLHX/FLTR/FLHTCUTG/FLHXXX 10-11) 20-00256 $23.99 

FLHR/FLHT/FLHX/FLTR/FLHTCUTG/FLHXXX 10-12 

ACTIVE INTAKE AND EXHAUST ELIMINATOR KIT 

20-00407 32.99 

For late-model European spec models w/ active intake and exhaust 20-00408 27.99 

“YELLOW BAND” 

FUEL INJECTORS 

FOR FLST/FXST 01-05, FLHT/FLHR/FLHX/ 

FLTR 02-05/08-12 AND FXD 04-05 

Flows 62 grams per second ❖ Perfect for 

“Big Inch” motors (115+ hp) ❖ Sold in pairs 

❖ Made in the U.S.A. 

$271.99 

PART NO. 20-00715 

488 

17-2649 20-1946 

H21-0135 

20-1947 

H21-0170 

FUEL PRESSURE REGULATOR 

Designed for better fuel delivery ❖ 62 psi 

Delphi regulator ❖ Direct fit in 01-07 OEM 

fuel-injected applications ❖ Made in 

the U.S.A 

$122.99 

H21-0169 

ELECTRONIC FUEL 

INJECTION COMPONENTS 

OEM replacement parts ❖ For fitment and 

part number refer to OEM parts manual 

H21-0213 

H21-0770 

DESCRIPTION 

INJECTORS 


For FLT 99-01 (optional high-flow, 31 lb. per hour) H21-0131 $246.99 

For FXSTI, FLSTI 01-05, FLT 02-05, Dyna 04-05; repl. OEM NO. 27609-01 (32 lb. per hour) 

For FXSTI, FLSTI 01-05, FLT 02-05, Dyna 04-05; repl. OEM NO. 27609-01 

H21-0213 170.99 

(optional high-flow, 47 lb. per hour) 

FUEL REGULATOR 

20-1310 201.99 

For 95-99; repl. OEM NO. 27219-95 (300 kPa) H21-0169 67.99 

For 95-99; repl. OEM NO. 27219-95 (350 kPa) 

AIR TEMPERATURE SENSOR 

18-2761 80.99 

For 95-05; repl. OEM NO. 27270-95 

ENGINE TEMPERATURE SENSOR 

H21-0170 39.99 

For 99-10; repl. OEM NO. 32446-99 

BAROMETRIC PRESSURE SWITCH 

H21-0770 36.99 


THROTTLE POSITION SENSOR 

H21-0135 59.99 

For FXSTI, FLSTI, FXSTDI 01-05, FLT 02-05, Dyna 04-05; repl. OEM NO. 27629-01 H21-0132 62.99 

For FXST, FLST, Dyna, FLHT 06-10; repl. OEM NO. 27659-06 

IDLE AIR CONTROL MODULE 

20-1946 31.99 

For FXST, FLST, Dyna 06-10, FLHT 06-07; repl. OEM NO. 27658-06 

MAP SENSOR W/ SEAL 

For fuel-injected models 99-10 (except Dresser 08-10 models), Big Twin Carb models 00-06 

20-1947 46.99 

and XL 04-06; repl. OEM NO. 32316-99 17-2649 62.99 

PART NO. 18-6139 

H21-0131 

H21-0132 

20-8995 

O2 

ENRICHMENT DEVICES 

Reduces your engine temperature between 20 and 30 degrees 

❖ Easy installation in minutes; simply plug in device between the 

oxygen sensors and the OEM wiring harness ❖ Designed to change 

AFR from 14.6:1 to 14.2:1 ❖ Recommended for models with high 

flow air intakes and exhausts ❖ Sold in pairs 


Dyna 06 and all models 07-11 (except FLHR/FLHT/FLHX/FLTR/FLHTCUTG/FLHXXX 08-11) 

FLHR/FLHT/FLHX/FLTR 07-08 and all Big Twin Race 07-11 

20-8995 $84.99 

(except FLHR/FLHT/FLHX/FLTR/FLHTCUTG/FLHXXX 08-11) 20-9672 113.99 

FLHR/FLHT/FLHX/FLTR/FLHTCUTG/FLHXXX 09 (all) 20-9936 113.99 

FLHR/FLHT/FLHX/FLTR/FLHTCUTG/FLHXXX 10-11 (all) 20-9937 122.99 

XL 07-11 and XR1200/X 09-11 20-9673 113.99 

17-3451 

FUEL-INJECTION LINES 

FOR FLHTCU-I 95-99, FLHR-CI 98-99, 

FLTR-I 98-99, FLHTC-I 96-99, 

FLTCU-I 96, FLHR-I 96-97 

Upgrade the looks and performance of your 

fuel-injection lines ❖ Stainless steel braided 

lines feature a bright chrome finish and resist 

the chemicals in gasoline 

$192.99 

17-3452 

PART NO. 18-3090 

20-00159 

18-5418 

20-00160 20-00162 

ELECTRONIC FUEL INJECTION COMPONENTS 

Direct OEM replacement parts ❖ Refer to OEM parts manual for 

fitment and part number 

DESCRIPTION 

INJECTORS 


For FXSTI, FLSTI 01-05, FLT 02-05, Dyna 04-05; repl. OEM NO. 27609-01 (32 lb. per hour) 

For FXSTI, FLSTI 01-05, FLT 02-05, Dyna 04-05; repl. OEM NO. 27609-01 

20-00164 $175.99 

(optional high-flow, 47 lb. per hour) 

FUEL REGULATOR 

20-00159 208.99 

For 95-99; repl. OEM NO. 27219-95 (300 kPa) 18-5419 69.99 


AIR TEMPERATURE SENSOR 

18-5418 84.99 

For 95-05; repl. OEM NO. 27270-95 

ENGINE TEMPERATURE SENSOR 

17-3451 40.99 

For 99-10; repl. OEM NO. 32446-99 

THROTTLE POSITION SENSOR 

17-3452 37.99 

For FXST, FLST, Dyna, FLHT 06-10; repl. OEM NO. 27659-06 20-00160 32.99 

For FXSTI, FLSTI, FXSTDI 01-05, FLT 02-05, Dyna 04-05; repl. OEM NO. 27629-01 

IDLE AIR CONTROL MODULE 

20-00163 133.99 

For FXST, FLST, Dyna 06-10, FLHT 06-07; repl. OEM NO. 27658-06 

For FXSTI, FXSTSI, FXSTBI, FXSTDI, FLSTI, FLSTFI 01-05, FLTRI, FLHRI, FLHRCI, 

20-00161 48.99 

FLHTCUI 02-05, Dyna 04-05, VRSC 02-10; repl. OEM NO. 27628-01 

MAP SENSOR W/ SEAL 

For fuel-injected models 99-10 (except Dresser 08-10 models), Big Twin Carb models 00-06 

20-00158 51.99 

and XL 04-06; repl. OEM NO. 32316-99 20-00162 64.99 


TECHNICAL 



20-00158

H30-8552 H30-8356 H30-8468 H30-8493 

HYPERCHARGER AIR CLEANERS 

Unmatched flow, performance and looks from Küryakyn ❖ Vacuum pod automatically opens the butterflies as your motor demands more air 

❖ Handles up to a 160 cubic-inch engine ❖ Replaceable K&N filter ensures top performance ❖ Fit Harleys 66-12 with most popular carbs or 

EFI; include all necessary hardware to mount to stock carb; if you use an aftermarket carb, see note ❖ Complete kits include all necessary 

breathers and hardware ❖ Vacuum pod rebuild kit PART NO. 18-2793 is also available ❖ 100% made in the U.S.A. 

NOTE: If you use an aftermarket carburetor, you may need a Hypercharger breather kit and/or adapter kit for proper installation. See “Hypercharger Adapters and Breathers” on page 491 to find out 

how to get all the parts you’ll need. If you run a stock carb, you will not need any additional mounting hardware, unless noted. 

DESCRIPTION 

EARLY-STYLE HYPERCHARGER (BUTTERFLY SHAFT ENDS SHOWING) 

CANDY RED BLACK CANDY BLUE PRICE CHROME PRICE 

Big Twin 84-89 w/ stock carb, S&S B series or QwikSilver II2 LATE-STYLE HYPERCHARGER (BUTTERFLY SHAFT ENDS COVERED) 

Twin Cam 99-06 w/ CV carb (late inlet), Twin Cam 06-12 w/ Delphi EFI (all except FLHT, 

- - - - H30-8493 $229.99 

FLHR, FLHX, FLTR, FLHXXX, FLHTCUTG 08-12), EFI FXST/FLST 01-05, EFI FLT 02-05 H30-8552 H30-9751 - $237.99 H30-8554 237.99 

FLHR, FLHT, FLHX, FLTR, FLHXXX, FLHTCUTG 08-12 (late inlet) - 18-4036 - 237.99 18-4038 237.99 

Twin Cam 01-05 w/ Delphi EFI - - - - 18-2970 275.95 

Evo Big Twin 95-99 w/ EFI - - - - H30-8550 256.99 

Big Twin 90-91 w/ stock carb; adapter not necessary2 - - - - H30-8504 229.99 

Big Twin 92 w/ stock carb; adapter not necessary2 - - - - H30-8506 229.99 

Big Twin 93-99 w/ HSR42 Mikuni - - - - H30-9687 256.99 

Big Twin 93-99 w/ stock carb and Screamin’ Eagle breather 

Pre-Evo Big Twin and XL w/ S&S E & G series, Mikuni HSR40 or HSR42, Screamin’ Eagle 

- - - - 18-2968 229.99 

or Rev Tech performance carbs (adapter required) 1 - - - - H30-8446 190.99 

Evo Big Twin 93-98 w/ S&S E & G series carb (complete kit) 

Evo Big Twin 84-91 w/ S&S E & G series, Mikuni HSR40 or HSR42, Screamin’ Eagle carb 

- - - - H30-8367 275.99 

(adapter required) - - - - H30-8504 229.99 

XL 88-90 w/ stock carb - H30-8356 - 218.99 - - 

XL 86-90 w/ S&S E or G series Mikuni HS40 or HSR42 or Screamin’ Eagle2 - H30-8356 - 218.99 - - 

XL 91-06 w/ stock carb; adapter not necessary, Kuryakyn breather kit included H30-8466 H30-8467 H30-8468 227.99 H30-8469 239.99 

XL 07-12 - - - - 18-5549 227.99 

1 No support bracket available, must be fabricated. 2 Requires breather kit PART NO. H30-0700 kit or similar – see adapter chart, page 491. 

HYPERCHARGER BLOOD GROOVE 

DESIGN AIR CLEANERS 

All the features of the original here in the blood groove design 

❖ Available as listed with chrome-plated body and trap door with 

either chrome or black butterflies ❖ Include Küryakyn’s breather 

where applicable ❖ Adapter for S&S E & G, Mikuni HSR42 carbs 

available separately ❖ Breather bolt (not available from Dennis Kirk) 

and enrichener PART NO. H30-8519 are both required to mount 

adapter PART NO. H30-8520 on S&S E & G carburetors 

DESCRIPTION 

BLOOD GROOVE HYPERCHARGERS 

W/ chrome butterflies for Twin Cam 99-06 w/ OEM CV carb, 06-12 Delphi EFI 


(except FLHT, FLHR, FLHX, FLTR, FLHXXX, FLHTCUTG 08-12) 

W/ black butterflies for Twin Cam 99-06 w/ OEM CV carb, 06-12 Delphi EFI 

H30-005 $246.99 

(except FLHT/FLHR/FLTR/FLHX, FLHXXX/FLHTCUTG 08-12) 

W/ black butterflies and lettered trap door for Twin Cam 99-06 w/ OEM CV carb, 

18-2971 256.99 

06-12 Delphi EFI (except FLHT/FLHR/FLTR/FLHX, FLHXXX/FLHTCUTG 08-12) 18-5558 275.99 

W/ chrome butterflies for FLHR, FLHT, FLHX, FLTR, FLHXXX, FLHTCUTG 08-12 18-4041 246.99 

W/ black butterflies for FLHR, FLHT, FLHX, FLTR, FLHXXX, FLHTCUTG 08-12 18-4042 256.99 

W/ chrome butterflies for Twin Cam 01-05 w/ Delphi EFI 

W/ chrome butterflies for FLTR, FLHT, FLHR 99-01 

30-4477 275.99 

w/ OEM electronic fuel injection H30-006 275.99 

W/ chrome butterflies for Evolution Big Twin 93-99 w/ OEM CV carb H30-001 256.99 

H30-001 


BLOOD GROOVE HYPERCHARGERS (CONT) 

W/ black butterflies for Evolution Big Twin 93-99 w/ OEM CV carb H30-004 $256.99 

W/ chrome butterflies for XL 91-06 w/ OEM CV carb H30-003 256.99 

W/ chrome butterflies for XL 91-06 w/ stock carburetor and 

Screamin’ Eagle crankcase breather 18-2972 239.99 

W/ chrome butterflies for XL 07-12 18-5556 256.99 

W/ black butterflies for XL 07-12 18-5557 275.99 

PARTS AND ACCESSORIES 

S&S enrichener H30-8519 21.99 

Adapter for S&S E & G H30-8520 47.99 

Vacuum pod rebuild kit 18-2793 13.99 

Repl. rubber boots and hoses for Evolution crankcase breather kit 18-6106 8.99 


TECHNICAL 



489 

F 

U 

E 

L 

/ 

I 

N 

T 

A 

K 

E

F 

U 

E 

L 

/ 

I 

N 

T 

A 

K 

E 

PRO R HYPERCHARGER AIR CLEANERS 

The best-flowing Hypercharger we have ever produced ❖ All interior shapes have been carefully 

designed to increase airflow ❖ Outer cover has an additional scoop to direct air onto the high-flow, 

washable and reusable air filter ❖ Huge front butterflies are vacuum operated to flow almost unrestricted 

air under high-load riding situations ❖ Come complete with all necessary mounting hardware and 

crankcase breather kit 


CHROME HYPERCHARGER 

Twin Cam w/ CV carb 99-06, Twin Cam w/ Delphi EFI 06-12 

(except FLHR, FLHT, FLHX, FLTR, FLHXXX, FLHTCUTG 08-12) 18-2798 $299.99 

FLHR, FLHT, FLHX, FLTR, FLHXXX, FLHTCUTG 08-12 18-4033 313.99 

Twin Cam w/ Delphi EFI 01-05 18-2799 299.99 

Evolution Big Twin w/ CV carb 93-99 18-2797 278.99 

XL models w/ CV carb 91-06 18-2796 278.99 

XL 07-12 18-5551 295.99 

PRO SERIES HYPERCHARGER 

AIR CLEANERS 

Massive airflow – features a 50% larger air filter than 

our regular Hypercharger ❖ Modified internal shapes 

allow increased airflow and velocity ❖ Contoured 

cleaner body is now 1 H30-183 

/2” wider ❖ “Pro” embossed 

bearing cups, one-piece construction, ball-milled with 

“speed lines” symmetrical butterflies ❖ Radiused 

edges of Pro Series Hypercharger give a more 

streamlined appearance ❖ Hypercharger cover with 

speed lines completes the performance look 

❖ Fit stock or 44mm CV-style carburetors; can be 

easily adapted to fit Mikuni HSR42/45/48 and S&S 

H30-093 

Shorty carburetors ❖ Kit contains chrome Pro Series 

Hypercharger, mounting kit and crankcase breather kit ❖ Upgrade kit is available for anyone currently using a new style (replaceable bearing 

cup style) Hypercharger ❖ Kit consists of the “Pro” large volume outer case half with bearing cups, butterflies, larger K&N air filter element 

and necessary hardware 


CHROME BODY WITH CHROME BUTTERFLIES 

Twin Cam 99-06 w/ CV carb, 06-12 Delphi EFI 

(except FLHR, FLHT, FLHX, FLTR, FLHXXX, FLHTCUTG 08-12) H30-186 $275.99 


Evolution Big Twin 93-99 w/ CV carb H30-184 275.99 

FLT (Dressers and Road Kings) w/ EFI 99-01 H30-093 278.99 

FLT (Dressers and Road Kings) w/ EFI 95-98 H30-094 278.99 

XL 91-06 w/ CV carb H30-183 275.99 

XL 07-12 18-5550 278.99 

STINGER TRAP DOOR 

FOR HYPERCHARGER 

Designed to maximize airflow 

into the carburetor ❖ Large 

scoops channel the air; 

Shown installed 

incredibly cost-effective way 

to increase airflow ❖ Four-bolt 

replacement for standard Hypercharger trap door 

❖ Chrome finish ❖ Sold each 

490 

$52.99 

H30-8479 H30-8480 

H30-8485 

PART NO. 18-2791 

H30-8478 

H30-8486 H30-8484 

18-2796 


REPLACEMENT COMPONENTS 

Butterfly shaft caps w/ screws, washers, bearings and springs (kit) 18-3853 $16.99 


Case screws (set of 3) 18-3854 6.99 

Repl. air filter element 30-4692 16.99 

Repl. K&N air filter element H30-095 56.99 

Repl. chrome butterflies (pr.) 30-5553 14.99 

Repl. black butterflies (pr.) 30-5554 14.99 


CHROME BODY WITH BLACK BUTTERFLIES 

Twin Cam 99-06 w/ CV carb, 06-12 Delphi EFI 

(except FLHT, FLHR, FLHX, FLTR, FLHXXX, FLHTCUTG 08-12) H30-189 $275.99 


REPLACEMENT PARTS 

Butterfly shaft caps w/ screws, washers, bearings and spring (set) 18-3852 16.99 


Repl. chrome butterflies (pr.) 30-5553 14.99 

Repl. black butterflies (pr.) 30-5554 14.99 

WRINKLE BLACK 

HYPERCHARGER 

AIR CLEANER 

Küryakyn air cleaners are 

now offered in wrinkle 

black ❖ A perfect choice 

for Night Trains and 

FXDXs – wrinkle black 

body with wrinkle black 

Blood Groove trapdoor 

and chrome butterflies 

❖ Include Küryakyn 

crankcase breather 

H30-224 


Twin Cam 99-06 w/ CV carburetor, Twin Cam 06-12 w/ Delphi EFI 

(except FLHT, FLHR, FLHX, FLTR, FLHXXX, FLHTCUTG 08-12) H30-224 

FLHT, FLHR, FLHX, FLTR, FLHXXX, FLHTCUTG 08-12 18-4043 

HYPERCHARGER BUTTERFLIES 

AND ACCESS COVERS 

Let you change colors or replace damaged originals ❖ Also may 

be painted to match a custom color ❖ Will not fit Pro Series 

Hyperchargers ❖ Butterflies sold in pairs; access covers sold each 


BUTTERFLIES 

Candy red H30-8485 $15.99 

Black H30-8484 15.99 

Candy blue H30-8486 15.99 

Chrome H30-8488 15.99 

$275.99 


ACCESS COVERS 

Candy red H30-8479 $18.99 

Black H30-8478 18.99 

Candy blue H30-8480 18.99 

Chrome H30-8482 20.99 


TECHNICAL 


www.denniskirk.com

INFINITY STREAMLINER FOR HYPERCHARGER 

A flick of a switch transforms this cover from a smooth chrome 

finish to a stunning LED vortex of lights ❖ Seven-color LED operates 

in three modes: single color steady illumination; single color 

flashing illumination with rheostat-adjustable rate; and paint mode – 

continuously fading in and out of seven colors (red, lime, ice blue, 

sky blue, dark blue, purple and green) with rheostat-adjustable rate 

of color change ❖ Installs on any standard Hypercharger air cleaner 

(except Pro R, Pro Series Hypercharger) in under an hour ❖ Will not 

fit on Stinger trap door 

$189.99 

PART NO. 49-2624 

HYPERCHARGER ADAPTER AND BREATHER KITS 

This application chart will get you the parts required to properly mount a Küryakyn Hypercharger to most 

H-D models equipped with an aftermarket carb ❖ To get what you need, first find your model application 

on the left-hand side of the chart, then find your carb type in the columns across the top of the chart – 

where the application line and carb-type column meet is the PART NO. you need ❖ Be sure to read the 

footnotes carefully because some models require a breather kit for proper installation and operation 

MODEL & YEAR S&S E & G ADAPTER HSR 42/46/48 BREATHER KIT 

Big Twin 84-91 w/ high performance carb H30-85202 18-27921 Big Twin 90-91 w/ high performance carb H30-85202 18-27921 Big Twin 92 w/ high performance carb H30-85202 18-27921 Evo Big Twin 93-99 w/ high performance carb H30-85202 18-27921 Pre-Evo Big Twin, XL 66-83 w/ high performance carb H30-85202 - 

XL 86-90 w/ high performance carb H30-85201, 2 18-27921 XL 91-01 w/ high performance carb H30-85201, 2 18-27921 1 Requires H30-8519 enrichener, $21.99, and mounting bracket. 2 Requires H30-8519 enrichener, $21.99, and breather bolts. 


18-2792 $44.99 

HYPERCHARGER 

REPLACEMENT 

AIR FILTER 

K&N filter fits all Küryakyn 

Hyperchargers except 

Pro R, Pro Series and 

Pro Series upgraded 

Hyperchargers 

$43.99 

PART NO. H30-8513 

VELOCIRAPTOR AIR CLEANERS 

Race-inspired design and showbike looks 

❖ Uses a K&N washable filter element to 

breathe deep and clean ❖ Super ring insert 

covers the mounting bolts and helps smooth 

airflow to the motor 

$151.99 


Twin Cam 99-06 w/ CV carburetor and Twin Cam 06-12 

w/ Delphi EFI (except FLHT/FLHR/FLTR/FLHX and 

FLHXXX/FLHTCUTG 08-12) 18-5547 

FLHT/FLHR/FLTR/FLHX and FLHXXX/FLHTCUTG 08-12 18-5548 

Evolution Big Twin 93-99 18-5546 

XL 91-06 18-5545 

XL 07-12 18-5555 

ADAPTER AND BREATHER PRICES 


H30-8520 $47.99 

HYPER STREAMLINER 

Give your engine a whole new look with this Hypercharger trim plate 

❖ Graceful lines provide new looks without affecting performance 

❖ Easy to bolt on; installs in minutes ❖ Fits all Hyperchargers 

(except Pro R, Pro Series Hypercharger) ❖ Will not work with 

Stinger trap door 

$37.99 

SPACER FOR 

HYPERCHARGER 

5 /8” CV bolt pattern spacer 

$19.99 

PART NO. H30-182 


ADAPTER FOR BUELL 


TECHNICAL 



H30-8520 


For Buell w/ S&S E & G series carb H30-8520 $47.99 

H30-180 H50-8476 

BLOOD GROOVE ACCESS COVERS 

Blood Groove access cover is a great 

accessory for any Hypercharger (except 

Pro R, Pro Series Hypercharger) ❖ Sold each 

$23.99 


Black H30-180 

Chrome H50-8476 

18-5545 

18-5546 

491 

F 

U 

E 

L 

/ 

I 

N 

T 

A 

K 

E

F 

U 

E 

L 

/ 

I 

N 

T 

A 

K 

E 

DESCRIPTION COLOR PART NO. PRICE 

STANDARD 

Twin Cam 99-06 w/ CV carburetor and Twin Cam 06-12 Polished aluminum 18-5266 $265.99 

w/ Delphi EFI (except FLHT/FLHR/FLHX/FLTR Black/chrome 18-6150 275.99 

and FLHXXX/FLHTCUTG 08-12) Gloss black 18-6156 275.99 

FLHT/FLHR/FLTR/FLHX and FLHXXX/FLHTCUTG 08-12 Polished aluminum 18-5267 265.99 

Black/chrome 18-6151 275.99 

Gloss black 18-6157 275.99 

Evolution Big Twin 93-99 w/ CV carburetor Polished aluminum 18-5265 265.99 

Black/chrome 18-6149 275.99 

Gloss black 18-6155 275.99 

XL 91-06 w/ CV carburetor Polished aluminum 18-5264 265.99 

Black/chrome 18-6148 275.99 

Gloss black 18-6154 275.99 

XL 07-12 Polished aluminum 18-5554 265.99 

Black/chrome 18-6152 275.99 

Gloss black 18-6158 275.99 

Air cleaner assembly only Polished aluminum 18-5263 237.99 

Black/chrome 18-6147 246.99 

Gloss black 18-6153 246.99 

CORSAIR AIR CLEANERS 

Free-flowing, aggressively styled high-performance air cleaner 

❖ High-flow air filter element supplied by Advanced Flow 

Engineering (aFe) for maximum performance is inside a chromeplated 

die-cast housing ❖ Provide enough air to support engines 

making in excess of 100 horsepower ❖ Air cleaner extends 

approximately 6” straight out and 121 /2” forward of the engine 

❖ PART NO. 18-3747 is a complete Corsair assembly (CV bolt 

pattern) for use with custom adapters, brackets, etc. for custom 

installation on models for which a complete kit is not offered 


Evolution Big Twin 93-99 w/ CV carb, Twin Cam 99-06 w/ CV carb or 

Twin Cam 06-12 w/ Delphi fuel injection (except FLHR, FLHT, FLHX and 

FLTR 08-12, FLHTCUTG/FLHXXX 09-12) 18-3746 $278.99 

FLHT, FLHR, FLHX, FLTR 08-12, FLHTCUTG/FLHXXX 09-12 18-4039 278.99 

XL 91-06 w/ CV carb 18-3745 278.99 

STREET SLEEPER II 

Incorporates the Hi-Five high-flow air filter 

element in an air cleaner that retains the stock 

oval air cleaner cover ❖ High-flow parabolic curve 

air entry to the throttle body ❖ Low profile of 

stock air cleaner means plenty of legroom for 

comfort ❖ Has a re-usable K&N 

high-flow air filter element $170.99 

18-6103 



(except FLHT/FLHR/FLTR/FLHX, FLHTCUTG/FLHXXX 08-12) 18-6103 

FLHT/FLHR/FLTR/FLHX, FLHTCUTG/FLHXXX 08-12 18-6159 

492 

17-3443 17-3444 

18-5263 

HI-FIVE MACH 2 

AIR CLEANER ASSEMBLIES 

Great performance and stunning looks ❖ Flows enough air to support motors making more 

than 140 horsepower ❖ Medallion inserts in the air cleaner assembly are interchangable so 

you can change the look in just minutes ❖ Aluminum construction with a polished or black/ 

chrome or all gloss black finish available 

17-3445 17-3446 

17-3447 

17-3448 

18-6146 18-6152 18-6157 

57-6295 

40-9010 

DESCRIPTION COLOR PART NO. PRICE 

ZOMBIE 

Twin Cam 99-06 w/ CV carburetor and Twin Cam 06-12 

w/ Delphi EFI (except FLHT/FLHR/FLHX/FLTR and 

FLHXXX/FLHTCUTG 08-12) Polished aluminum 18-5268 $275.99 

FLHT/FLHR/FLTR/FLHX 08-12 and FLHXXX/FLHTCUTG 09-12 Polished aluminum 18-5269 275.99 

MEDALLIONS 

Art Deco Chrome 17-3443 19.99 

Flame Chrome 17-3444 19.99 

Widow Chrome 17-3445 19.99 

Zombie Chrome 17-3446 19.99 

Chauvanist Chrome 17-3447 19.99 

Patriot Chrome 17-3448 19.99 

Helicopter Gunship Chrome 40-9010 19.99 

Firefighter Chrome 40-9012 19.99 

Widow Gloss black 57-6294 19.99 

Zombie Gloss black 57-6295 19.99 

Repl. air filter Chrome 30-4693 69.99 

Black Spike inserts (5-pc.) Gloss black 18-6146 37.99 

18-3747 18-4039 

NOTE: Installation of this air cleaner may decrease rider legroom. 

40-9012 


XL 07-12 18-5552 $284.99 

Complete Corsair air cleaner assembly only 18-3747 255.99 

Repl. air filter for Corsair air cleaner 18-3751 66.99 

Repl. pre-filter element for Corsair air cleaner 18-3752 30.99 

STREET SLEEPER 

AIR CLEANER KITS 

High-flow air cleaner backplate ❖ Re-uses stock 

outer air cleaner cover ❖ Allows up to 40% 

more airflow with air filter designed by K&N 

❖ Can support airflow for engines 

making up to 130 horsepower $161.99 18-4961 



(except FLHT/FLHR/FLTR/FLHX, FLHXXX/FLHTCUTG 08-12) 18-4961 

FLHT/FLHR/FLTR/FLHX, FLHXXX/FLHTCUTG 08-12 18-4962 


TECHNICAL 


www.denniskirk.com

TWIN VELOCITY PLUS AIR CLEANERS 

Cleaner housing has slots on both sides and enlarged openings at 

bottom to allow more air ❖ Round breather element underneath 

cover allows air to enter the end of the filter ❖ Improved airflow and 

a clean look from the teardrop center of cover ❖ Internal crankcase 

vent system directs gasses and oil droplets into the carburetor 

induction module, eliminating a mess on the outside of the engine 

❖ The result is improved airflow for better performance ❖ Carb 

adapter and replacement K&N air filter elements sold each 

❖ Available with a chrome finish ❖ Optional powdercoated inner 

plates let you add a custom color touch 

DESCRIPTION 

TWIN VELOCITY PLUS AIR CLEANERS 

For Twin Cam 99-06 w/ stock CV carb or Twin Cam 06-12 w/ Delphi fuel 


injection (except FLHR, FLHT, FLHX and FLTR, FLHXXX, FLHTCUTG 08-12) 18-3220 $218.99 

For Evolution Big Twin 93-99 w/ stock CV carburetor 

ACCESSORIES 

18-3219 218.99 

Adapter for S&S carbs for Evolution Big Twin 90-99 H30-181 49.99 

Repl. primary K&N filter element 30-4443 56.99 


ACCESSORIES (CONT) 

Repl. secondary K&N filter element 30-4444 $11.99 

OPTIONAL INNER PLATES 

Candy red 18-3221 37.99 

Black 18-3222 37.99 

Candy blue 18-3223 37.99 

SKULL AIR CLEANER KITS 

Add a sinister look to your ride ❖ High-strength composite 

construction cover is extremely rigid ❖ Backing plate, high-flow 

air filter element and all necessary brackets, crankcase breathers and other required hardware included ❖ Bolt directly to stock 40mm or 

44mm Screamin’ Eagle CV carburetors ❖ Adapters available separately so kits may be used with Mikuni HSR42/45/48, S&S Shortys or other 

aftermarket carburetors ❖ Sold each 


CHROME 

Twin Cam 99-06 w/ CV carb, Twin Cam 06-12 w/ Delphi EFI 



XL models 91-06 w/ CV carb 18-2808 239.99 

XL 07-12 18-5553 246.99 

18-2973 49-2627 49-7347 

SKULL AIR CLEANER COVERS 

FOR S&S E & G SERIES AIR CLEANERS 

Bad-to-the-bone replacement cover for the standard teardrop cover ❖ Very unique look – 

skull motif flows cleanly down the side of the cover ❖ Chrome-plated finish on high-strength 

composite material construction ❖ Quick, easy installation with supplied hardware 


Satin black 18-2973 

Chrome 49-2627 

$94.99 

THROTTLE SERVO MOTOR COVERS 

FOR FLHR/FLHT/FLHX/FLTR 08-12 

A great-looking remedy that hides the stock servo motor 

assembly under a cover of beautiful chrome ❖ Must-have 

addition when upgrading from the stock air cleaner assembly 

❖ Throttle body support bracket cover (sold separately) 

completes the transformation ❖ All are sold each 


For use with Screamin’ Eagle Stage I air cleaner 49-5499 $75.99 

For use with all Küryakyn air cleaners 49-5501 75.99 

Throttle body support bracket cover 49-5500 47.99 


Black chrome 49-7347 

49-5500 

18-3220 

18-2811 18-2811 

18-3220 

18-6105 


GLOSS BLACK 

Twin Cam 99-06 w/ CV carb, Twin Cam 06-12 w/ Delphi EFI 



INFINITY 

COVER 

Seven-color LED 

really draws the 

attention ❖ Three 

operating modes: 

single-color steady 

illumination, singlecolor 

flashing 

illumination with 

rheostat-adjustable 

rate and Paint Mode ❖ In Paint Mode, all 

lights, in unison, continually fade in and out 

with each other (red, lime, ice blue, sky 

blue, dark blue, purple, green) with rheostatadjustable 

rate ❖ When LED is turned off, 

cover has a solid chrome appearance ❖ LED 

light is an extremely low draw on the battery 

❖ For use on stock Twin Cam 99-12 (except 

Dyna 08-12) air cleaner covers 

$189.99 PART NO. 49-4428 

49-5501 


TECHNICAL 



493 

F 

U 

E 

L 

/ 

I 

N 

T 

A 

K 

E

F 

U 

E 

L 

/ 

I 

N 

T 

A 

K 

E 

DOUBLE BARREL AIR 

FILTER ASSEMBLIES 

Change the look and performance 

of your bike with this leadingedge 

designed air filter assembly 

available in chrome or powdercoated 

black wrinkle finish 

❖ Includes aluminum double 

barrel outer cover, aluminum 

radius inlet backing plate, 

reusable/washable pre-oiled 

hi-performance air filter and all 

necessary hardware 

$237.99 


CHROME 

FLHT, FLHR, FLHX, FLTR, FLHTCUTG, FLHXXX 08-12 18-4672 

Twin Cam CV carb 99-06 and Twin Cam Delphi EFI 01-12 (except FLHT, FLHR, FLHX, 

FLTR, FLHTCUTG, FLHXXX 08-12) 18-4674 

XL w/ CV carb or Delphi EFI 91-12 18-4645 

18-4683 18-4687 

“BILLET SUCKER” AIR CLEANER ASSEMBLIES 

Gain tremendous air flow from the oversized exposed filter design ❖ Features a one-piece aluminum backing plate with patented hidden 

breather technology and radius air inlet for maximum airflow ❖ Breather passages exit at the mouth of the carb/throttle body, creating a 

virtually closed-loop system ❖ Each kit includes a high-flow air filter, outer cover, 

backing plate/support bracket and all necessary hardware ❖ Made in the U.S.A. 

NOTE: See page 496 for replacement/optional components. 


STAGE I KITS, CHROME 

Smooth for FLHT, FLHR, FLHX, FLTR, FLHTCUTG, FLHXXX 08-12 18-3788 $204.99 

Scalloped for FLHT, FLHR, FLHX, FLTR, FLHTCUTG, FLHXXX 08-12 18-3790 204.99 

Smooth for all Twin Cam carb 99-06 and Twin Cam Delphi fuel-injected 01-12 

(except FLHT, FLHR, FLHX, FLTR, FLHTCUTG, FLHXXX 08-12) 18-3201 204.99 

Scalloped for all Twin Cam carb 99-06 and Twin Cam Delphi fuel-injected 01-12 


STAGE I KITS, BLACK/RAW 




Scalloped for all Evolution Big Twin w/ CV carb 93-99 18-4681 204.99 

Scalloped for XL w/ CV carb or Delphi EFI 91-12 18-4682 1 204.99 

STAGE II KITS, CHROME 

Smooth for FLHT, FLHR, FLHX, FLTR, FLHTCUTG, FLHXXX 08-12 18-3789 213.99 


Grooved for FLHT, FLHR, FLHX, FLTR, FLHTCUTG, FLHXXX 08-12 18-3792 213.99 

Retro for FLHT, FLHR, FLHX, FLTR, FLHTCUTG, FLHXXX 08-12 18-4683 213.99 

Smooth for all Twin Cam carb 99-06 and Twin Cam Delphi fuel-injected 01-12 




494 

18-4011 

18-4672 18-4673 

18-4011 


BLACK 

FLHT, FLHR, FLHX, FLTR, FLHTCUTG, FLHXXX 08-12 18-4673 

Twin Cam CV carb 99-06 and Twin Cam Delphi EFI 01-12 (except FLHT, FLHR, FLHX, 

FLTR, FLHTCUTG, FLHXXX 08-12) 18-4675 

XL w/ CV carb or Delphi EFI 91-12 18-4646 

H30-630 

DESCRIPTION 

STAGE II KITS, CHROME (CONT) 

Grooved for all Twin Cam carb 99-06 and Twin Cam Delphi fuel-injected 01-12 


(except FLHT, FLHR, FLHX, FLTR, FLHTCUTG, FLHXXX 08-12) 

Retro for all Twin Cam carb 99-06 and Twin Cam Delphi fuel-injected 01-12 

18-3205 $213.99 


Smooth for all Evolution Big Twin w/ CV carb 93-99 H30-631 208.99 

Scalloped for all Evolution Big Twin w/ CV carb 93-99 18-2539 208.99 

Grooved for all Evolution Big Twin w/ CV carb 93-99 H30-630 208.99 

Retro for all Evolution Big Twin w/ CV carb 93-99 18-4685 213.99 

Scalloped for Twin Cam FLT fuel-injected 99-01 18-2538 213.99 

Retro for Twin Cam FLT fuel-injected 99-01 18-4661 213.99 

Scalloped for XL 91-12 18-25371 213.99 

Grooved for XL 91-12 18-25351 208.99 

Retro for XL w/ CV carb or Delphi EFI 91-12 18-46861 STAGE II KITS, BLACK/RAW 

213.99 

Scalloped for FLHT, FLHR, FLHX, FLTR, FLHTCUTG, FLHXXX 08-12 

Scalloped, for all Twin Cam carb 99-06 and Twin Cam Delphi fuel-injected 01-12 

18-4687 213.99 


Scalloped, for all Evolution Big Twin w/ CV carb 93-99 18-4689 213.99 

Scalloped, for Twin Cam FLT fuel-injected 99-01 18-4662 213.99 

Scalloped, for XL w/ CV carb or Delphi EFI 91-12 18-46901 1 Will fit 88-90 models; breather system is not applicable for these model years. 

213.99 

LITTLE SUCKER AIR FILTER KITS 

Each kit features the steel backing plate integrated into the filter; 

aluminum backing plate not required ❖ Additional urethane on the 

backing plate forms into a radius inlet ❖ Uses factory exposed 

breather hoses and hardware ❖ Must use factory outer air cleaner 

cover ❖ Made in the U.S.A. 

$94.99 

H30-631 


For Twin Cam 99-06 w/ CV carb and Twin Cam Delphi fuel-injected models 01-12 

(except FLHT, FLHR, FLHX, FLTR, FLHTCUTG, FLHXXX 08-12) 18-4011 

For FLHT, FLHR, FLHX, FLTR, FLHTCUTG, FLHXXX 08-12 18-4012 


TECHNICAL 


www.denniskirk.com

18-3198 

18-3200 

18-5973 

“BIG SUCKER” PERFORMANCE AIR FILTER KITS 

Use one of these kits to eliminate the need for banjo fittings, hoses and filter ❖ Each kit features a one-piece cast aluminum backing plate/ 

carb support bracket and all necessary hardware and instructions ❖ Stage I kit includes a high-flow filter and accepts 93-12 oval or round 

OEM outer cover (unless noted) ❖ Stage II kit includes a 20% larger high-flow filter and accepts an 8” round Ness or 8” round OEM outer 

DESCRIPTION 

STAGE I KITS, NATURAL 


FLHT, FLHR, FLHX, FLTR, FLHTCUTG, FLHXXX 08-12 18-3784 $123.99 

FXD/FXDWG 08-12 

Twin Cam carb 99-06 and Twin Cam Delphi fuel-injected 01-12 (except FLHT, FLHR, FLHX, 

18-5972 132.99 

FLTR, FLHTCUTG, FLHXXX 08-12) 18-31971 123.99 


FLHTI/FLHRI 99-01 H30-648 123.99 

XL w/ CV carb or Delphi fuel-injected 91-12 18-25331, 2 123.99 

XL w/ CV carb or Delphi fuel-injected 91-12 18-59732 STAGE I KITS, CHROME 

132.99 

FLHT, FLHR, FLHX, FLTR, FLHTCUTG, FLHXXX 08-12 18-3786 142.99 

FXD/FXDWG 08-12 


18-5971 151.99 


XL w/ CV carb or Delphi fuel-injected 91-12 18-54462 cover ❖ Breather passages exit at the mouth of the carburetor/throttle 

body, creating a virtually closed-loop system 

152.95 

DESCRIPTION 

KITS WITH STANDARD FILTER, CHROME 


FLHT, FLHR, FLHX, FLTR, FLHTCUTG, FLHXXX 08-12 


18-5424 $151.99 

FLTR, FLHTCUTG, FLHXXX 08-12 and fuel-injected FLHT, FLHR, FLHX, FLTR 00-01) 18-5425 151.99 

Evolution Big Twin models w/ CV carb 93-99 18-5426 151.99 

FLHTI/FLHRI 99-01 18-5427 151.99 

XL w/ CV carb or Delphi fuel-injected 91-12 18-54281 KITS WITH STANDARD FILTER, BLACK 

151.99 



18-5429 151.99 



FLHTI/FLHRI 99-01 18-5432 151.99 

XL w/ CV carb or Delphi fuel-injected 91-12 18-54331 KITS WITH STAINLESS-STEEL JACKETED FILTER, CHROME 

151.99 


DESCRIPTION 

KITS WITH STANDARD FILTER, CHROME 




18-4121 $161.99 



FLHTI/FLHRI 99-01 18-4117 161.99 

XL w/ CV carb or Delphi fuel-injected 91-12 18-41181 KITS WITH STANDARD FILTER, BLACK 

161.99 



18-4123 161.99 

FLTR, FLHTCUTG, FLHXXX 08-12 and fuel-injected FLHT, FLHR, FLHX, FLTR 00-01) 

KITS WITH STAINLESS-STEEL JACKETED FILTER, CHROME 

18-4122 161.99 



18-4701 180.99 



DESCRIPTION 

STAGE I KIT, BLACK 


FXD/FXDWG 08-12 18-5970 $151.99 

XL w/ CV carb or Delphi fuel-injected 91-12 18-54472 STAGE II KITS, NATURAL 

152.95 



18-3785 132.99 



FLHTI/FLHRI 99-01 H30-650 132.99 

XL w/ CV carb or Delphi fuel-injected 91-12 18-25342 STAGE II KITS, CHROME 

132.99 



18-3787 151.99 

FLTR, FLHTCUTG, FLHXXX 08-12) 

1 Accept 8” round aftermarket covers only. 

2 Will fit 88-90 models also; breather system is not applicable for these model years. 

18-3200 151.99 

“BIG SUCKER” AIR FILTER 

KITS WITH COVER 

Use one of these kits to eliminate the need for 

banjo fittings, hoses and filter ❖ Each kit features 

a one-piece cast aluminum backing plate/carb 

support bracket and all necessary hardware and 

18-4120 

18-4123 

18-4701 

instructions ❖ Stage I kit includes a high-flow filter and steel outer cover ❖ Stage II kit includes a 20% larger high-flow filter and steel outer 

cover and accepts an 8” round Ness or 8” round OEM outer cover; pre-oiled filters available in two styles: standard or stainless-steel 

jacketed ❖ Breather passages exit at the mouth of the carburetor/throttle body, 

creating a virtually closed-loop system ❖ Made in the U.S.A. 

STAGE I 


STAGE II 

H30-647 

H30-648 

DESCRIPTION 

KITS WITH STAINLESS-STEEL JACKETED FILTER, CHROME (CONT) 


FLHT, FLHR, FLHX, FLTR, FLHTCUTG, FLHXXX 08-12 w/ 58mm throttle bodies 


18-5444 $170.99 



FLHTI/FLHRI 99-01 18-5437 170.99 

XL w/ CV carb or Delphi fuel-injected 91-12 18-54381 KITS WITH STAINLESS-STEEL JACKETED FILTER, BLACK 

170.99 


FLHT, FLHR, FLHX, FLTR, FLHTCUTG, FLHXXX 08-12 w/ 58mm throttle bodies 


18-5445 170.99 



FLHTI/FLHRI 99-01 18-5442 170.99 

XL w/ CV carb or Delphi fuel-injected 91-12 18-54431 1 Will fit 88-90 models also, breather system is not applicable for these model years. 

170.99 

DESCRIPTION 

KITS WITH STAINLESS-STEEL JACKETED FILTER, CHROME (CONT) 


Evolution Big Twin w/ CV carb 93-99 18-4691 $180.99 

FLHTI/FLHRI 99-01 18-4671 180.99 

XL w/ CV carb or Delphi fuel-injected 91-12 18-46471 KITS WITH STAINLESS-STEEL JACKETED FILTER, BLACK 

180.99 



18-4702 180.99 



FLHTI/FLHRI 99-01 18-4648 180.99 

XL w/ CV carb or Delphi fuel-injected 91-12 18-4636 1 1 Will fit 88-90 models also; breather system is not applicable for these model years. 

180.99 


TECHNICAL 



495 

F 

U 

E 

L 

/ 

I 

N 

T 

A 

K 

E

F 

U 

E 

L 

/ 

I 

N 

T 

A 

K 

E 

NESS-TECH ® 

90° AIR FILTERS 

Machined from billet 

aluminum and then beautifully 

chrome-plated ❖ Feature 

patented “Big Sucker” 

breather technology 



For Evolution and Twin Cam motors w/ CV carb or Delphi EFI 92-05 18-2896 

For 113” and under S&S motors w/ S&S carb 18-2897 

496 

$284.99 

18-2896 


KITS W/ STANDARD PRE-OILED FILTER, CHROME 

FLHT, FLHR, FLHX, FLTR, FLHTCUTG, FLHXXX 08-12 18-4697 $151.99 

Twin Cam CV carb 99-06 and Twin Cam Delphi EFI 01-12 (except FLHT, 

FLHR, FLHX, FLTR, FLHTCUTG, FLHXXX 08-12) 18-4705 151.99 


FLHTI/FLHRI 99-01 18-4641 151.99 

XL w/ CV carb or Delphi EFI 91-12 18-4642 1 151.99 

KITS W/ STANDARD PRE-OILED FILTER, BLACK 





FLHTI/FLHRI 99-01 18-4643 151.99 

XL w/ CV carb or Delphi EFI 91-12 18-4644 1 151.99 


For 114”-124” S&S motors w/ S&S carb 18-2898 

BIG SUCKER DERBY COVER AIR FILTER KITS 

Unique air filter kits featuring a 5-hole mounting system ❖ Allows Twin Cam derby covers (not included, see pages 475-478) to be bolted 

on as the outer cover ❖ Available with either pre-oiled standard or stainless-steel jacketed filters ❖ All kits include patented Ness hidden 

breather Big Sucker backing plates in either chrome or powder-coated black wrinkle finish 


REPLACEMENT/OPTIONAL COMPONENTS 

Stage I hardware kit for Twin Cam CV carb 99-06 and all 

Twin Cam Delphi EFI 01-12 18-4649 $33.99 

Stage I hardware kit for Evolution Big Twin w/ CV carb 93-99 18-4650 33.99 

Stage I hardware kit for FLHTI/FLHRI 99-01 18-4651 33.99 

Stage I hardware kit for XL 91-12 18-4652 33.99 

Stage II hardware kit for Twin Cam CV carb 99-06 and 

Twin Cam Delphi EFI 01-12 18-4657 34.99 

Stage II hardware kit for Evolution Big Twin w/ CV carb 93-99 18-4658 34.99 

Stage II hardware kit for FLHTI/FLHRI 99-01 18-4659 34.99 

Stage II hardware kit for XL 91-12 18-4660 34.99 

Stage I air filter (all except FLHTi/FLHRi 99-01, FLHX/FLTR 08-11) H30-027 47.99 

Stage I air filter for H30-648 only H30-067 47.99 

Stage I air filter for FLHT, FLHR, FLHX, FLTR, FLHTCUTG, FLHXXX 08-12 18-3793 47.99 

Stage II air filter for FLHT, FLHR, FLHX, FLTR, FLHTCUTG, FLHXXX 08-12 18-3794 52.99 

Stage II air filter element (all except FLHT/FLHR/FLHX/FLTR/ 

FLHTCUTG/FLHXXX 08-12) H30-066 52.99 

Stage I stainless-steel jacketed air filter for FLHT, FLHR, FLHX, FLTR, 

FLHTCUTG, FLHXXX 08-12 30-6016 66.99 

Stage I stainless-steel jacketed air filter for Twin Cam CV carb 99-06, 

Twin Cam Delphi EFI 01-12 (except FLHT, FLHR, FLHX, FLTR, FLHTCUTG, 

FLHXXX 08-12), Evolution Big Twin w/ CV carb 93-99, Twin Cam carb and 

Delphi EFI 99-05, XL 91-12 30-6017 66.99 

18-2898 

18-4693 18-4695 18-4697 18-4699 

REPLACEMENT AND OPTIONAL COMPONENTS FOR BILLET SUCKER 

AND BIG SUCKER AIR FILTER KITS 

Replacement and optional components for all Ness Billet Sucker and Big Sucker air filter kits 

DESCRIPTION 

KITS W/ STAINLESS-STEEL JACKETED PRE-OILED FILTER, CHROME 




18-4693 $170.99 



FLHTI/FLHRI 99-01 18-4637 170.99 

XL w/ CV carb or Delphi EFI 91-12 18-46381 KITS W/ STAINLESS-STEEL JACKETED PRE-OILED FILTER, BLACK 

170.99 



18-4695 170.99 



FLHTI/FLHRI 99-01 18-4639 170.99 

XL w/ CV carb or Delphi EFI 91-12 18-46401 170.99 

1 Will fit 88-90 models also, breather system is not applicable for these model years. 

18-2540 


REPLACEMENT/OPTIONAL COMPONENTS (CONT) 

Stage I stainless-steel jacketed air filter for FLHTI/FLHRI 99-01 30-6020 $66.99 

Stage II stainless-steel jacketed air filter for FLHT, FLHR, FLHX, FLTR, 

FLHTCUTG, FLHXXX 08-12 30-6018 75.99 

Stage II stainless-steel jacketed air filter for Twin Cam CV carb 99-06, 

Twin Cam Delphi EFI 01-12 (except FLHT, FLHR, FLHX, FLTR, FLHTCUTG, 

FLHXXX 08-12), Evolution Big Twin w/ CV carb 93-99, Twin Cam carb and 

Delphi EFI 99-05, FLHTI/FLHRI 99-01, XL 91-12 30-6019 75.99 

Gasket kit for FLT, FLHTCUTG, FLHXXX 08-12 18-4653 7.99 

Gasket kit for Twin Cam CV carb 99-06, Twin Cam Delphi EFI 01-12 

(except FLHT, FLHR, FLHX, FLTR, FLHTCUTG, FLHXXX 08-12), 

Evolution Big Twin w/ CV carb 93-99, Twin Cam Carb and Delphi EFI 99-05 18-4654 7.99 

Gasket kit for FLHTI/FLHRI 99-01 18-4655 7.99 

Gasket kit for XL 91-12 18-4656 7.99 

Optional Stage I smooth outer cover (chrome) 49-7238 47.95 

Optional Stage I smooth outer cover (black) 49-7239 47.95 

Optional Stage I scalloped outer cover (chrome) 49-3458 113.99 

Optional Stage I scalloped outer cover (black/raw) 49-6187 113.99 

Optional Stage II scalloped outer cover (chrome) 18-2540 113.99 

Optional Stage II scalloped outer cover (black/raw) 49-6188 113.99 

Optional Stage II retro outer cover (chrome) 49-6186 113.99 


TECHNICAL 


www.denniskirk.com

30-7216 

DERBY SUCKER AIR FILTERS FOR 

SCREAMIN’ EAGLE 

DESCRIPTION 

FXS/FXST/FLST 99-12, FLHT 02-07, FXD 97-07 


Red 30-7216 $65.99 

Stainless steel 


30-7217 84.99 

Red 30-7214 65.99 

Stainless steel 30-7215 84.99 

® BACKING PLATES 

An innovative filter upgrade made for stock Screamin’ 

Eagle ® air cleaner ❖ Accepts any 5-hole Big Twin style 

derby cover (sold separately, see pages 475-478) and comes with 

everything needed to mount to a round Screamin’ Eagle ® backing 

plate ❖ Available with either red filter or stainless steel filter 

PIN UP COVER 

FOR BIG AIR KITS 

Pin-up model “Danni Doll” comes 

to life with revolutionary powdercoated 

image technology 

❖ Two-piece, CNC machined billet 

aluminum ❖ Chrome outer frame 

and base plate with powder-coated 

pin-up girl to alter the look of your 

Big Air Kit are included ❖ Requires 

Baron Big Air Kit to install on 


$208.99 

30-7214 

30-7215 

POWERFLO AIR INTAKE KITS 

Maximum airflow is promoted through a 

unique internal venturi design ❖ The best 

air intake and maximum protection for your 

engine is ensured by a high-flow K&N 


FOR TWIN CAM W/ CV CARB OR DELPHI EFI 99-12 

(EXCEPT 99-01 TOURING INJECTED MODELS/FLHT, 

FLHR, FLTR, FLHX, FLHXXX, FLHTCUTG 08-12) 

Chrome 18-5180 $236.99 

Black 18-5181 236.99 

® air 

filter element ❖ An aluminum cover and 

all the fasteners, seals, backing plate and 

mounting hardware to make for an easy 

installation are all included ❖ Bugs and 

debris are kept out by a formed stainless 

steel mesh insert in the dual entry ports 

❖ Available in black or chrome finish 

PART NO. 49-6980 

REPLACEMENT AIR FILTER 

ELEMENTS FOR SCREAMIN’ 

EAGLE 


Standard red 30-6524 $47.99 

Standard stainless steel 30-6525 66.99 

® AIR CLEANER 

FOR FLHT, FLHR, FLHX, FLTR, FLHTCUTG 

AND FLHXXX 08-12 

Premium direct replacement element for 

Screamin’ Eagle ® kits ❖ Handmade one at 

a time in a urethane body that won’t crack 

❖ Four layers of surgical-grade cotton provide 

optimum air flow and protection ❖ Comes preoiled 

❖ 100% reusable and washable 

❖ Available in standard replacement red cotton 

and standard replacement stainless steel 

❖ Can be used with Ness Stage I top cover for 

an exposed filter high-performance look; no 

other hardware necessary 

30-6524 

Enferno Pinstripe Black Pinstripe 

BIG AIR KITS 

Horsepower and torque are substantially 

increased by the flow bench and dyno 

design ❖ A beautifully chromed billet cover and an innovative styling 

enhances and accentuates your V-Twin engine ❖ Your legs will 

not be interfered with by the set-back, thin-line design ❖ Overall 

performance and fuel efficiency are maximized ❖ Easily supports 

engines producing over 120 hp ❖ A breather kit, mounting hardware, 

micron-fabric rain coat for wet weather riding and easy-to-follow 

installation instructions are all included 


EVOLUTION BIG TWIN 93-99 W/CV CARB, 

TWIN CAM 99-12 W/CV CARB OR DELPHI 

FUEL INJECTION (EXCEPT FLHT/FLHR/ 

FLHX/FLTR/FLHTCUTG/FLHXXX 08-12) 

Smooth 18-4255 

Flame 18-4283 

Comet 18-4284 

Enferno 18-4285 

Pinstripe 18-4511 

Pinstripe (black) 18-4513 


FOR FLHT, FLHR, FLTR, FLHX, FLHXXX, FLHTCUTG 08-12 

Chrome 18-5178 $236.99 

Black 18-5179 236.99 

Smooth Flame Comet 

$284.99 


FLHT/FLHR/FLHX/FLTR/FLHXXX/ 

FLHTCUTG MODELS 08-12 


Flame 18-4286 

Comet 18-4287 

Enferno 18-4288 

Pinstripe 18-4512 

Pinstripe (black) 18-4514 

18-5180 18-5181 


FOR XL 04-12 

Chrome 18-5452 $237.99 

Black 18-5453 237.99 


TECHNICAL 



497 

F 

U 

E 

L 

/ 

I 

N 

T 

A 

K 

E

F 

U 

E 

L 

/ 

I 

N 

T 

A 

K 

E 

MOTO INTAKE KITS 

CNC-machined aluminum construction ❖ Increases 

airflow while maintaining a low profile ❖ Cleanable/ 

reusable proprietary air filter has over 130 sq. 

inches of filter element ❖ Internal velocity stack with 

internal breathers breathe directly 

back into venturi ❖ Made in the U.S.A. 


FLHT, FLHR, FLTR, FLHX, FLHTCUTG AND FLHXXX 08-12 


Black anodized 18-5397 

BIG TWIN 93-06 WITH S&S E & G CARBS 



DOUBLE SHOT AIR FILTER KITS 

Features a molded backing plate that improves 

air flow ❖ Smooth cast aluminum cover wraps 

in at rear for rider comfort ❖ Uses stock vent 

system ❖ K&N air filter and hardware included 


$278.99 

498 

$352.99 


FOR FXST/FLST 01-12, FXD/FXDWG 04-12 AND FLHT/FLHR/FLHX/ 

FLTR 02-07 MODELS W/ DELPHI EFI 


Black powder-coat 18-6034 

18-4062 

VO2 AIR INTAKES 

It’s all about how much air your motor can take in ❖ Now there is 

a system that works better and looks better than any other on the 

market ❖ An all-aluminum venturi helps shape the air for better flow 

❖ Hand-formed chromed steel covers in Drak or Duke styles for 

a distinctive design that is a perfect match for any Vance & Hines 

exhaust system ❖ Exhaust, fuel and now air make for the 

complete package 

DUKE COVER 

MODEL & YEAR 

CHROME 

For Twin Cam w/ Delphi EFI 01-12 (except FLHT, FLHR, FLHX, 


FLTR 08-12), Twin Cam w/ CV carb 99-06 18-4179 $233.99 

For FLHT, FLHR, FLHX, FLTR 08-12 18-4181 233.99 

For XL 04-12 

BLACK 

For Twin Cam w/ Delphi EFI 01-12 (except FLHT, FLHR, FLHX, 

18-4180 233.99 

FLTR 08-12), Twin Cam w/ CV carb 99-06 18-4182 251.99 


For XL 04-12 18-4183 251.99 

NAKED VO2 AIR INTAKES 

For those wanting to keep the stock look, but not necessarily 

the stock performance ❖ PART NOS. 18-4965 and 18-4966 

use stock air cleaner cover; PART NOS. 18-5420 and 

18-5421 must use air cleaner inserts PART NOS. 18-5422 

or 18-5423 ❖ Includes a high-flow washable filter element, 

larger inlet backing plate and billet venturi to get more air in 

rider’s motor for more power ❖ Made in the U.S.A. 

$125.99 


For FLHT, FLHR, FLHX, FLTR, FLHTCUTG, FLHXXX 08-11 models 18-4966 

For Twin Cam w/Delphi EFI 01-11, Twin Cam w/CV carb 99-06 

(except 08-11 Dressers, Dyna, X-Bones) 18-4965 

For Dyna 08-11 18-5420 

For XL 04-11 18-5421 


BIG TWIN 93-06 WITH STOCK CV CARB, SOFTAIL 01-12, 

DYNA 04-12, FLT, FLHT 02-07 WITH DELPHI EFI 



FOR MIKUNI HSR 42MM CARBS 



18-4063 

18-4929 18-5396 


FOR FLHT/FLHR/FLTR/FLHX/FLHTCUTG/FLHXXX 08-12 


Black powder-coat 18-6032 

20-2473 

18-6031 18-6034 

DRAK COVER 


CHROME 

For Twin Cam w/ Delphi EFI 01-12 (except FLHT, FLHR, FLHX, FLTR 08-12) 20-2473 $206.99 


BLACK 

For Twin Cam w/ Delphi EFI 01-12 (except FLHT, FLHR, FLHX, FLTR 08-12) 18-4062 233.99 


18-4966 

18-4179 

20-2506 

Exploded view 


TECHNICAL 



18-4182

REPLACEMENT FILTER AND RAIN SOCK 

FOR SPEED’S PERFORMANCE PLUS HIGH-VELOCITY AIR CLEANER KITS 

Made in the U.S.A. 


Repl. air filter 30-6293 $59.00 

18-5131 


Repl. rain sock 30-6294 $32.95 

SPEEDY FLOW AIR CLEANERS 

One-piece billet backing plate/carb support bracket ❖ Design eliminates need for banjo fittings, hoses and breather 

filter ❖ Dyno-proven to gain 8-10 horsepower over OEM ❖ Internal breathing system ❖ High-flow filter is 5 /8” deeper 

than stock performance filter for better flow than any stage I or II filter kit on the market ❖ OEM oval outer cover can be retained ❖ Breather 

bolts are held in place by setscrews ❖ Mikuni application requires adapter (sold separately) ❖ Available with polished or black-anodized 

finish ❖ Chrome-finished billet aluminum air cleaner covers are available separately with or without the Speed’s Performance Plus logo; bolts 

directly over 99-12 model Speedy Flow air cleaners and can be used with rain sock ❖ Rain sock available separately ❖ Made in the U.S.A. 

FINNED 

AIR CLEANER 

FLT, FLHT, FLHR, FLHX, 

FLTR, FLHTCUTG, 

FLHXXX 08-12 

Unique style shows the motor through 

the teardrop silhouette ❖ Chrome-plated, 

billet aluminum construction ❖ Includes 

a K&N washable filter element for better 

performance and long service ❖ Fits 

many popular models ❖ Mounting bracket 

sold separately 

$441.99 

PART NO. 18-5408 

18-5136 

DESCRIPTION FINISH PART NO. PRICE 

For FLHT, FLHR, FLHX, FLTR, FLHTCUTG, FLHXXX 08-12 Polished 18-5136 $199.00 

Black 18-5153 209.00 

For Big Twin Evolution 93-99 w/ CV carb Polished 18-5131 199.00 

Black 18-5151 209.00 

For Twin Cam 99-06 w/ CV carb or Delphi fuel injection 01-12 

(except FLHR, FLHT, FLHX, FLTR, FLHTCUTG, FLHXXX 08-12) 

Polished 18-5132 199.00 

Black 18-5152 209.00 

POWER X INTAKES 

FOR FLHT, FLHR, FLHX, FLTR AND FLHTCUTG/FLHXXX 08-12 

Delivers more acceleration and power, increases throttle 

response ❖ Backing plate features internal breather intakes 

❖ Included poly/cotton filter has an extra-large filtering area 

for more airflow; traps particles down to 40 microns ❖ Works 

with stock air filter cover ❖ Includes mounting hardware 

$217.99 


Polished silver 18-6001 

18-5152 

30-6293 

BILLET AIR 

CLEANER KITS 

Made of solid billet 

aluminum with black 

anodized finish ❖ Builtin 

breather mounts ❖ Won’t crack under high 

horsepower applications ❖ Designed with O-ring grooves that prevent shimming and oil leaks 

❖ Work with stock or aftermarket cover ❖ Includes premium cleanable/reusable air filter, 

gaskets, O-rings and hardware ❖ Made in the U.S.A. 

18-6001 

18-4976 

18-6002 

30-6294 

49-7326 

DESCRIPTION FINISH PART NO. PRICE 

Mikuni air box adapter kit - H17-005 $17.99 

Repl. air filter - 30-6295 55.00 

Rain sock - 30-6296 29.95 

SPP logo air cleaner cover Chrome 49-7326 90.00 

Plain air cleaner cover Chrome 49-7327 85.00 


For all JIMS elliptical throttle bodies and Screamin’ Eagle Pro Super Bore 51mm CV carb 18-4975 $319.99 

For H-D 08-10 and Screamin’ Eagle Pro high-flow 58mm EFI/cable-operated throttle bodies 18-4976 319.99 

For Big Twin 90-06 and XL 88-06 w/ 40mm CV carb or Delphi EFI 01-12 

(except FLHT/FLHR/FLHX/FLTR/FLHXXX/FLHTCUTG 08-12), black 18-5370 319.99 

For Big Twin 90-06 and XL 88-06 w/ 40mm CV carb or Delphi EFI 01-12 

(except FLHT/FLHR/FLHX/FLTR/FLHXXX/FLHTCUTG 08-12), chrome 18-5371 388.99 


Matte black 18-6002 


TECHNICAL 



499 

F 

U 

E 

L 

/ 

I 

N 

T 

A 

K 

E

F 

U 

E 

L 

/ 

I 

N 

T 

A 

K 

E 

49-2754 

49-2760 

H30-036 

THE BULLET AIR CLEANERS 

Increase airflow approximately 10% over OEM air cleaner ❖ Choice of black or chrome elbow ❖ Bullet-shaped cone with 360° slots ❖ Bulletshaped 

filter cone with slots, K&N air filter, 90° elbow; installation hardware included ❖ Must use with a carb support bracket and breather 

kit (sold separately) ❖ Adapters (not included) fit Big Twin 90-12 and XL 88-06 models with 40mm CV carb or Delphi EFI 01-12 (except 

FLHR/FLHT/FLHX/FLTR 08-12) 

CONE TYPE PART NO. PRICE 

WITH CHROME ELBOW 

Chrome H18-0086 $465.99 

Black diamond-cut 49-2760 565.99 


S&S Super D carburetor (vertical or horizontal) 18-2833 $95.99 

Mikuni carburetor (horizontal), Delphi EFI 01-12 (except FLHR, FLHT, FLHX, FLTR 08-12) H17-005 17.99 

40mm CV carburetor (vertical) H30-036 37.99 

500 

H18-0086 

DRAG SPECIALTIES DESIGN 

SPEAR AIR CLEANER 

Spear-style air cleaner kits with special Drag Specialties-inspired 

designs ❖ Chrome finish ❖ Increases airflow by 10% over OEM 

❖ Accepts all D&M Bullet-style replacement cones ❖ Requires 

breather kit and carb support bracket (sold separately); mounts 

on various carbs with optional adapters ❖ Adapters fit Big Twin 

90-12 and XL 88-06 with 40mm CV carb or Delphi EFI 01-12 

(except FLHR/FLHT/FLHX/FLTR/FLHTCUTG/FLHXXX 08-12) 

DESCRIPTION 

KIT 


DS Spear air cleaner kit 

ADAPTERS AND RAIN SOCK 

49-2775 $465.99 

S&S Super D carburetor (vertical or horizontal) 18-2833 95.99 

S&S E&G carburetor (vertical or horizontal) H30-277 39.99 

PART NO. DESCRIPTION 


18-6021 Black filter w/ stainless steel 

18-6022 Black filter 

WITH GLOSS BLACK ELBOW 


18-6021 

ADAPTERS, RAIN SOCK AND REPLACEMENT FILTER 

18-6026 

18-6024 

HEAVY HITTER AIR CLEANERS 

FOR BIG TWIN 90-06 AND XL 88-06 WITH 40MM CV CARB OR 

01-12 WITH DELPHI EFI 

Ideal for big-inch motors ❖ Flow a massive 540 cubic feet per minute 

❖ Will fit touring models with lowers ❖ Features built-in velocity stack 

and D&M’s High Flow air filter ❖ Must use with a carb support bracket 

and breather kit (sold separately) ❖ Filter is black media and is 

available with or without stainless steel wire ❖ Elbow and end cap are 

available in chrome, gloss black or wrinkle black ❖ Made in the U.S.A. 

$406.99 

PART NO. DESCRIPTION 

WITH GLOSS BLACK ELBOW (CONT) 


WITH WRINKLE BLACK ELBOW 



18-2833 

CONE TYPE PART NO. PRICE 

WITH BLACK ELBOW 

Wrinkle black 49-2754 $465.99 

Black diamond-cut 49-2762 565.99 


S&S E&G carburetor (vertical or horizontal) H30-277 $39.99 

Rain sock 30-6195 25.99 

Repl. air filter H30-231 67.99 

49-2775 

18-2833 


ADAPTERS AND RAIN SOCK (CONT) 

Mikuni HSR42/45 carburetor (horizontal) H17-005 $17.99 

40mm CV carburetor (vertical), Delphi EFI 01-12 (except FLHR, FLHT, 

FLHX, FLTR 08-12) H30-036 37.99 

Rain sock 30-6193 25.99 

18-5925 

18-5926 


Black 30-7239 $56.99 

18-5927 


TECHNICAL 



H30-036 

ULTIMATE FLOW AIR CLEANER KITS 

FOR BIG TWIN 90-06 AND XL 88-06 WITH 40MM CV CARB OR 

01-12 WITH DELPHI EFI 

Ultimate air flow at a wallet-friendly price ❖ Lifetime filter is 

constructed of modern materials that deliver maximum filtration while 

not restricting airflow ❖ Stainless steel end cap ❖ Kit includes elbow, 

filter, clamp, pre-filter and mounting hardware ❖ Black media filter 

is available with or without stainless steel wire; replacement filters 

available separately ❖ Elbow is available in chrome, gloss black or 

wrinkle black ❖ Must use with a carb support bracket and breather 

kit (sold separately) ❖ Made in the U.S.A. 

DESCRIPTION 



Black filter 18-5925 $249.99 

Black filter with stainless steel wire 

WITH GLOSS BLACK ELBOW 

18-5928 254.99 

Black filter 18-5926 249.99 

Black filter with stainless steel wire 

WITH WRINKLE BLACK ELBOW 

18-5929 254.99 

Black filter 18-5927 249.99 

Black filter with stainless steel wire 18-5930 254.99 

REPLACEMENT FILTERS 


Black w/ stainless steel wire 30-7240 $62.99

18-4013 

18-4918 

CARB SUPPORT BRACKET/BREATHER KITS 

Made of billet aluminum with chrome, black or wrinkle black finish 

❖ No external lines necessary; crankcase breathes back into the 

carb/throttle body ❖ Make it possible for custom air cleaners and 

velocity stacks to be mounted in a horizontal or vertical position; no 

other adapters are required ❖ Installation hardware included 

FINISH PART NO. PRICE 

FOR FLHT, FLHR, FLHX, FLTR, FLHTCUTG, FLHXXX 08-12 

Chrome 18-4013 $235.99 

FOR BIG TWIN 93-06 W/ 40MM CV CARB OR BIG TWIN 01-12 

W/ DELPHI EFI (EXCEPT DRESSERS 08-12) 

Chrome 18-5559 179.99 

Black 18-5560 179.99 

Wrinkle black 18-5561 179.99 



Twin Cam 99-06 w/ CV or Mikuni carb, Twin Cam 01-12 

18-3775 

w/ Delphi EFI (except FLHR/FLHT/FLHX/FLTR 08-12) 18-3388 

DESCRIPTION 

REPLACEMENT HARDWARE KITS 


FLHT, FLHR, FLHX, FLTR and H-D FL Trikes 08-12 18-5242 $34.99 

Evolution Big Twin 93-99 (all) 18-5240 34.99 

1 

Evolution Big Twin 93-99 w/ CV or Mikuni carbs 18-32971 Evolution Big Twin 93-99 w/ S&S E or G carb 

XL 91-12 w/ CV carb, Delphi Fuel-injected 

18-3390 

or Mikuni carbs 18-3299 

1 Requires adapter for Mikuni, PART NO. H17-005, PRICE $17.99. 

18-5560 


FOR BIG TWIN 93-06 W/ S&S E AND G CARB 

Chrome 18-5562 1 $179.99 

Black 18-5563 1 179.99 

Wrinkle black 18-5564 1 179.99 

FOR EVOLUTION BIG TWIN 93-99 W/ MIKUNI HSR 

42/45/48 CARB 

Chrome 18-5565 188.99 

Black 18-5566 188.99 


REPLACEMENT HARDWARE KITS (CONT) 

Twin Cam 99-06 (all) 18-5241 $34.99 

XL 91-12 (all) 18-5240 34.99 

18-5562 

18-5564 


FOR EVOLUTION BIG TWIN 93-99 W/ MIKUNI HSR 

42/45/48 CARB (CONT) 

Wrinkle black 18-5567 $188.99 

FOR XL 91-12 W/ CV CARB OR DELPHI EFI 

Chrome 18-4918 197.99 

Black 18-4919 197.99 

Wrinkle black 18-4920 197.99 

1 Not for 100” S&S motors. 


TECHNICAL 



18-5566 

18-3388 18-3388 18-3663 18-4146 

MO-FLOW BILLET AIR CLEANERS 

6061 T-6 billet aluminum, polished and chrome-plated ❖ Air cleaner features a velocity plate and reusable pleated gauze performance filter 

that has been engineered and flow tested to obtain maximum airflow and protection for your motor ❖ Hidden fasteners and an internal 

breather assembly for a clean look ❖ Seal breather assembly velocity plate and all mounting hardware included ❖ Available 

in chrome, flat black and gloss black ❖ Made in the U.S.A. 

CHROME FLAT BLACK GLOSS BLACK 

18-5254 

HIGH FLOW AIR CLEANERS 

Add some style and performance to your ride 

with these awesome looking air cleaners 

❖ Available in a black or chrome finish 

❖ Mounting brackets sold separately 

AIR CLEANERS 

DESCRIPTION 

SMOOTHIE 


Chrome 18-5254 $94.99 

Black 

5-SPOKE 

18-5255 94.99 

Chrome 18-5256 101.99 

Black 18-5257 101.99 

MAKE & YEAR PART NO. 



18-3776 

w/ Delphi EFI (except FLHR/FLHT/FLHX/FLTR 08-12) 18-36661 Evolution Big Twin 93-99 w/ CV or Mikuni carbs 18-36631 XL 89-12 w/ CV carb, Delphi Fuel-injected or 

Mikuni carbs 18-3665 


$284.99 


REPLACEMENT AIR FILTER 

Repl. air filter 30-6359 $56.99 

18-5255 18-5256 

18-5257 

18-5259 

MAKE & YEAR PART NO. 



18-4146 

w/ Delphi EFI (except FLHR/FLHT/FLHX/FLTR 08-12) 18-41411 Evolution Big Twin 93-99 w/ CV or Mikuni carbs 18-41401 XL 89-12 w/ CV carb, Delphi Fuel-injected or 

Mikuni carbs 18-4142 


18-5258 

18-5260 

MAKE & MODEL PART NO. PRICE 

For Big Twin 93-12 (except FLHR/FLHT/ 

FLHX/FLTR 08-12) 18-52581 $51.99 

For FLHR/FLHT/FLHX/FLTR/ 

FLHTCUTG/FLHXXX 08-12 18-52611 BRACKETS 

MAKE & MODEL PART NO. PRICE 

For XL 88-06 18-5260 $21.99 

For XL 07-12 18-5259 23.99 

61.99 

1 Includes bracket and breather. 

501 

F 

U 

E 

L 

/ 

I 

N 

T 

A 

K 

E

F 

U 

E 

L 

/ 

I 

N 

T 

A 

K 

E 

AIRCHARGER PERFORMANCE INTAKE KITS 

Greatly increases performance and horsepower ❖ Mandrel bent aluminum intake tube is available in two finishes: polished bright mirror or 

textured black ❖ Kit includes complete breather assembly and all necessary mounting hardware ❖ Drycharger is included for increased 

protection from the elements ❖ Replacement Drycharger also available separately ❖ Made in the U.S.A. 


TWIN CAM 99-12 W/ CV CARB OR DELPHI EFI 

(EXCEPT FLHR, FLHT, FLHX, FLTR, FLHTCUTG, FLHXXX 08-12) 

Black 18-5182 $379.99 

Polished 18-5183 379.99 

FLHR, FLHT, FLHX, FLTR, FLHTCUTG, FLHXXX 08-12 

Black 18-4458 313.99 

Polished 18-4459 332.99 

18-3387 

502 

18-4458 

18-5156 

18-3725 

18-4085 

XXX AIR CLEANER ASSEMBLIES 

Constructed of billet aluminum ❖ High-flow air filter element 

included ❖ Includes all necessary installation hardware 


FOR BIG TWIN 93-99 W/ CV CARB, TWIN CAM 01-12 WITH DELPHI EFI 

(EXCEPT DYNA 06-12, FLHR, FLHT, FLHX, FLTR AND FLHXXX/FLHTCUTG 08-12) 

Chrome 18-4086 $237.99 

Gloss black powdercoat 18-4907 237.99 

FOR FLHR, FLHT, FLHX, FLTR, FLHXXX/FLHTCUTG 08-12 

Chrome 18-4515 237.99 


18-5183 


XL 07-12 

Black 18-5156 $379.99 

Polished 18-6061 379.99 

REPL. AIR FILTERS 

For PART NO. 18-5156, 18-5182 or 18-4458; textured black 30-7063 81.99 

For PART NO. 18-5183 or 18-4459; polished 30-6815 50.99 

OPTIONAL DRYCHARGER 

Repl. drycharger 30-6007 29.99 

18-4515 


TECHNICAL 



30-6007 

FILTER KITS 

30-4747 

Kit incorporates K&N’s High-Flow Air Filter and a powder-coated billet aluminum backplate that does away with external breathers and 

features a built-in, dyno-tuned velocity stack ❖ Stock air cleaner cover preserves factory appearance ❖ Increases airflow to the engine, 

provides extra horsepower, and does not sacrifice proper filtration 


TWIN CAM W/ CV CARB 99-06, TWIN CAM W/ DELPHI EFI 01-12 

(EXCEPT FLHR/FLHT/FLHX/FLTR/FXD/FXDB/FXDC/FXDF/FXDL/FXDWG 08-12) 

Stock capacity filter assembly; 1 5 /8” tall 30-4747 1 $164.99 

Repl. filter for PART NO. 30-4747; 1 5 /8” tall 30-5857 57.99 

Large capacity filter assembly; 2 1 /4” tall 18-3387 1 206.99 

Upgrade filter kit for PART NO. 30-4747 (includes longer spacers); 2 1 /4” tall 30-5320 122.99 

Repl. filter for PART NO. 18-3387; 2 1 /4” tall 30-5321 63.99 

FXD/FXDB/FXDC/FXDF/FXDL/FXDWG 08-12 

Large capacity filter assembly; 2 1 /8” tall 18-4772 237.99 

18-4772 

DESCRIPTION 

FXD/FXDB/FXDC/FXDF/FXDL/FXDWG 08-12 (CONT) 


Repl. filter for PART NO. 18-4772; 21 /4” tall 

FLHT/FLHR/FLHX/FLTR/FLHTCUTG/FLHXXX 08-12 

30-6133 $66.99 

Stock capacity filter assembly; 15 /8” tall 18-4085 237.99 

Repl. filter for PART NO. 18-4085; 21 /4” tall 

XL 883/1200 04-12 

30-5996 75.99 

Large capacity filter assembly; 21 /4” tall 18-3725 323.99 

Repl. filter for PART NO. 18-3725; 23 /8” tall 30-5960 66.99 

1 For Dyna 08-11: will not fit w/ OEM air cleaner cover; can use Dyna 07 air cleaner cover. 

DESCRIPTION 

DRYCHARGERS 

PART NO. SIZE PRICE 

For Custom Evolution reverse tapered air filter, PART NO. 30-4763 30-5992 7” dia. (top) x 6” dia. (base) x 31 /4” (tall) $31.99 

For Twin Cam Screamin’ Eagle tapered air filter (except Dresser/Dyna 08-10), PART NO. 30-4795 30-5993 51 /2” dia. (top) x 61 /4” dia. (base) x 21 /4” (tall) 30.99 

For Touring Screamin’ Eagle air filter 08-10, PART NO. 30-5879 30-5993 51 /2” dia. (top) x 61 /4” dia. (base) x 21 PRECHARGER 

/4” (tall) 30.99 

Precharger for Mikuni 36-38mm dirt track air filters, PART NOs. 30-5529 and 30-643 30-1286 33 DRYCHARGERS 

Specially designed filter wrap made to extend the service interval of your K&N air filter when used in severe 

dusty or wet conditions ❖ Made from durable polyester material containing uniform micron openings, the 

DryCharger 

/4” inside width x 7” inside length (tall) 26.99 

® will stop small dirt particles ❖ Water repellent and yet adds little restriction to the airflow of your 

filter ❖ Feature double-stitched elastic openings to secure drycharger in place ❖ Designed to be run dry and 

can be cleaned with K&N filter cleaner ❖ Custom fit to each application ❖ Made in the U.S.A. 

30-5992 

30-5993 

18-4907 


FOR XL 91-12 

Chrome 18-4516 $237.99 


REPLACEMENT AIR FILTERS 

Filter for PART NOs. 18-4515, 18-4908 30-6521 37.99 

Filter for PART NOs. 18-4086, 

18-4516 and 18-4909 30-6522 35.99

18-4915 

18-4916 

18-6121 

30-5217 

30-5802 

TUNED INDUCTION AIR CLEANER KITS 

Swept forward, 2-into-1 design rams additional air into the cylinder ❖ Natural supercharging effect increases mid-range torque ❖ Nearly twice 

the filter area of a teardrop air cleaner ❖ Feature chrome ram and bracket (except where noted), backing plate, filters and hardware ❖ Made 

in the U.S.A. 


For Big Twin models 84-99 w/ stock CV carb and Big Twin models 01-12 w/ Delphi EFI 

(except FLHT, FLHR, FLHX, FLTR, FLHTCUTG, FLHXXX 08-12) 18-6121 $512.99 

For Big Twin models 84-12 w/ S&S single-bore fuel-injection 


For Big Twin models 84-06 w/ S&S E/G series carb 18-6126 512.99 

For S&S 124” motors w/ S&S 41 /8” E/G series carb 18-6124 512.99 

For S&S 124” motors w/ S&S 4 1 DESCRIPTION PART NO. PRICE 

For FLHT, FLHR, FLHX, FLTR and H-D FL trike models 08-12 18-4915 

/8” single-bore fuel-injection 

For XL 91-12 w/ stock CV carb and Delphi EFI 

18-6123 

18-6122 

512.99 

512.99 

1 $377.99 

For FLHT, FLHR, FLHX, FLTR and H-D FL trike models 08-12 18-49162 439.95 


Repl. red filter w/ clamp (ea.) 30-5217 48.99 

Opt. blue filter w/ clamp (ea.) 30-5218 48.99 

Moisture repellent rain cover for S&S tuned induction filters (pr.) 30-5802 37.99 

1 Black wrinkle powder-coat ram and bracket. 

2 Chrome ram w/ black wrinkle powder-coat bracket. 

GENUINE S&S 

AIR CLEANERS 

Set your bike apart from the crowd with one of these 

chrome-plated air cleaners ❖ High-quality air filter 

element included ❖ When using a five-gallon gas tank 

or larger, cover may need to be notched ❖ Made in 

the U.S.A. 

18-4103 

DESCRIPTION 

AIR CLEANERS 

Big Twin 96-06 using CV carb, Softail w/ EFI 01-12, and all EFI models 02-12 


(except FLHR/FLHT/FLHX/FLTR 08-12) 18-3777 $208.99 

XL 91-06 using CV carb 18-3778 208.99 

Twin Cam 99-06 using S&S E and G series carbs H30-646 208.99 

Evo Big Twin 92-99 using S&S E and G series carbs H30-500 208.99 

Evo Big Twin 84-92, XL 86-90 using S&S E and G series carbs H30-926 208.99 

Big Twin 48-84, XL 57-85 using S&S E and G series carbs H30-927 208.99 


AIR CLEANERS FOR S&S EFI MODELS 

18-4103 208.99 

For stock H-D heads or S&S heads for stock or 4” bore, teardrop 18-3364 208.99 

For stock H-D heads or S&S heads for stock or 4” bore, Desperado 18-3363 208.99 

For S&S heads for 41 /8” bore, Desperado 18-3362 208.99 

SUPER STOCK STEALTH AIR CLEANER KITS 

Designed for stock fuel system applications ❖ Include backing plate, filter and hardware 

❖ Built-in stinger cone in the filter directs air smoothly into the bore of the carburetor or 

EFI throttle body and reduced turbulence and increased flow ❖ Optional high-flow (1” taller) 

filter also available 

49-5266 


TECHNICAL 



30-5218 

H30-927 

DESCRIPTION 

REPLACEMENT AIR CLEANER ELEMENTS 


K&N element for H30-928 30-569 $41.99 

UNI element for H30-928 30-832 16.99 

Paper filter element for PART NOS. H30-646, H30-500, H30-926 and H30-927 30-6119 16.99 

Foam filter element for PART NOS. H30-646, H30-500, H30-926, H30-927 30-1224 16.99 

Foam filter element for PART NOS. H30-928, H18-097, H18-163 and S&S Super B 

REPLACEMENT PARTS 

H18-409 15.99 

Repl. S&S cover for E and G carbs H18-299 127.99 

Repl. S&S cover for S&S CV air cleaners and Super B carbs H18-219 127.99 

Repl. standard cover for all E & G carb kits; chrome Desperado-style 49-5266 127.99 

Repl. air cleaner cover screws (10-pk.) H18-338 9.99 

Repl. crankcase breather hose for Big Twin 93-05, XL 91-05 and Buells 81-03 18-2599 5.99 

Breather screw seals (silicone-coated steel washer), .520” (10-pk.) 18-2600 9.99 

Breather screw seals (silicone-coated steel washer), .380” (10-pk.) 18-2601 9.99 

18-6118 

NOTE: Kits do not come with covers. Must use with stock Twin Cam 88 ® , 96, or 103 air cleaner cover, or can be used with 

S&S Stealth air cleaner cover (sold separately) 

DESCRIPTION PART NO. PRICE DESCRIPTION PART NO. 

18-6119 

PRICE 

For FLHT, FLHR, FLHX, FLTR and H-D FL Trike models 08-12 (w/ stock EFI and Throttle-by-Wire) 18-6116 $119.99 For XL 91-12 (w/ stock CV carb & Delphi EFI) 18-6115 $119.99 

For Evo Big Twin 93-99 (w/ stock CV carb) 18-6117 119.99 REPLACEMENT/OPTIONAL COMPONENTS 

For Twin Cam Big Twin 99-06 (w/ stock CV carb) 18-6118 119.99 Repl. Stealth filter 30-7212 20.99 

For Evo Big Twin 93-99 (w/ E/G series carb) 18-6119 119.99 Opt. Stealth hi-flo filter (1” taller) 30-7213 46.99 

For Twin Cam Big Twin 99-06 (w/ stock E/G series carb) 18-6120 119.99 

STEALTH AIR 

CLEANER COVERS 

Covers fit the S&S Stealth air cleaner 

kits ❖ Bob and Muscle style air cleaner 

covers are machined from billet aluminum 

and fit over the end of the air filter and 

leaves the filter element exposed ❖ Air 

Stream-style is die-cast and features 

screened vents for more air without 

sucking in rain/road hazards ❖ Musclestyle 

features muscle car-style hood pins 


Air Stream, chrome 49-7941 $132.99 

Air Stream, black wrinkle powder-coat 49-7942 132.99 

Bob dish, chrome 49-7943 75.99 

49-7941 

49-7944 


Bob dish, black wrinkle powder-coat 49-7944 $75.99 

Bob dome, chrome 49-7945 75.99 

Bob dome, black wrinkle powder-coat 49-7946 75.99 

49-7945 

49-7946 

49-7947 

49-7948 


Muscle, chrome 49-7947 $113.99 

Muscle, black wrinkle powder-coat 49-7948 113.99 

503 

F 

U 

E 

L 

/ 

I 

N 

T 

A 

K 

E

F 

U 

E 

L 

/ 

I 

N 

T 

A 

K 

E 

18-5931 

FAST AIR INTAKE SOLUTIONS 

Innovative intake features an internal crankcase breather system 

❖ Produces more horsepower for stock air cleaner ❖ Includes K&N 

filter element and rain sock ❖ Contrast Cut finish is achieved by 

black anodizing a polished intake, then recutting it to open up the 

design ❖ Made in the U.S.A. 


FOR BIG TWIN 93-06 W/ CV CARB & TWIN 

CAM 01-12 W/ DELPHI EFI (EXCEPT FLHT/ 

FLHR/FLHX/FLTR/FLHTCUTG/FLHXXX 08-12) 

Contrast Cut 18-5931 $474.99 

Chrome 18-5932 474.99 

FOR BIG TWIN 93-06 W/ S&S E OR G CARB 

Contrast Cut 18-5937 474.99 

Chrome 18-5938 474.99 

18-5232 

Disassembled 

504 

49-6932 

49-6935 

49-6947 Shown mounted 

on an air cleaner 


FACEPLATES 

CARTEL 

Contrast Cut 49-6932 $81.99 

Chrome 49-6933 85.99 

DOMINO 

Chrome 49-6935 85.99 

EL DORADO 

Chrome 49-6936 85.99 

ELEMENT 

Chrome 49-7108 85.99 

18-5932 

30-6928 


FOR FLHT/FLHR/FLHX/FLTR/FLHTCUTG/ 

FLHXXX 08-12 

Contrast Cut 18-5933 $474.99 

Chrome 18-5934 474.99 

FOR XL 91-12 

Contrast Cut 18-5935 474.99 

Chrome 18-5936 474.99 


Rain sock 30-6928 31.99 

Air filter 30-6929 61.99 

49-6936 

18-5236 

49-6948 Shown mounted 

on an air cleaner 

49-6938 


FACEPLATES (CONT) 

ELEMENT (CONT) 

Platinum Cut 49-7107 $91.99 

GATLIN 

Contrast Cut 49-6937 81.99 

Chrome 49-6938 85.99 

HEATHEN 


Platinum Cut 49-6940 91.99 

Chrome 49-6941 85.99 

SUPER GAS 

MERC AIR 

CLEANERS 

18-6127 

Backing plate is CNC-machined aluminum ❖ Includes high-volume K&N 

air filter and mounting hardware ❖ Contrast Cut finish starts with a 

polished air cleaner that has been black anodized, then recut to open 

the design ❖ Black Ops finish has a machined surface that’s been 

treated for hardness and strength, then remachined and anodized for 

a spectacular black-on-black contrast ❖ Made in the U.S.A. 

NOTE: Faceplates are not interchangeable. 

18-5237 

49-6939 

49-6951 49-6954 

30-6438 

49-6942 



HOOLIGAN 

Chrome 49-6942 $85.99 

JUDGE 

Chrome 49-6944 85.99 

RIVERA 


Chrome 49-6946 85.99 

ROULETTE 

Chrome 49-6947 85.99 

49-7107 

18-6131 18-6135 

49-6944 

$398.99 

SUPER GAS AIR CLEANERS AND UNIVERSAL FACEPLATES 

Air cleaner uses interchangeable faceplates to match Performance Machine wheels ❖ Includes K&N filter ❖ Air cleaners and universal 

faceplates are sold separately ❖ Air cleaners are available in black and chrome finishes ❖ Universal faceplates are available in chrome, 

Contrast Cut and Platinum Cut finishes ❖ Contrast Cut finish is achieved by black anodizing a polished faceplate, then recutting to open 

the design ❖ Platinum Cut takes the process one step further by hand polishing the recut areas to a brilliant finish ❖ Screamin’ Eagle/Ness 

upgrade kit lets you use a universal faceplate on a Screamin’ Eagle/Arlen Ness air cleaner ❖ Screamin’ Eagle/Ness upgrade kit includes mesh 

insert, spacer, hardware, and PM Logo badge ❖ Made in the U.S.A. 


AIR CLEANERS 

FOR BIG TWIN 93-06 W/ CV CARB AND TWIN CAM 01-12 W/ DELPHI EFI 

(EXCEPT FLHT/FLHR/FLHX/FLTR/FLHTCUTG/FLHXXX 08-12) 

Black 18-5232 $327.99 

Chrome 18-5233 332.99 

FOR FLHT/FLHR/FLHX/FLTR/FLHTCUTG/FLHXXX 08-12 

Black 18-5234 327.99 

Chrome 18-5235 332.99 


FOR BIG TWIN 93-06 W/ CV CARB & TWIN 

CAM 01-12 W/ DELPHI EFI (EXCEPT FLHT/ 

FLHR/FLHX/FLTR/FLHTCUTG/FLHXXX 08-12) 

Contrast Cut 18-6131 


Black Ops 18-6135 

FOR BIG TWIN MODELS 93-06 

W/ S&S E OR G CARB 





FOR FLHT/FLHR/FLHX/FLTR/FLHTCUTG/ 

FLHXXX 08-12 




FOR XL 91-12 






RIVAL 

Contrast Cut 49-6948 $81.99 

Chrome 49-6949 85.99 

TORQUE 



Chrome 49-6953 85.99 

WRATH 


Chrome 49-6955 85.99 


TECHNICAL 



49-6931 

49-6945 


AIR CLEANERS (CONT) 

FOR XL 91-11 

Black 18-5236 $327.99 

Chrome 18-5237 332.99 

ACCESSORIES 

Upgrade kit for Screamin’ Eagle/Arlen Ness air cleaners 49-6931 24.99 

Pre-filter 30-6438 28.99

Chrome 

Contrast Cut 

Black Ops 

CLARITY AIR CLEANERS 

Billet aluminum construction ❖ Window lets you view internal moving intake parts ❖ Backing plate is designed to provide smooth airflow into 

carb ❖ K&N air filter included ❖ Contrast Cut finish is achieved by black anodizing a polished air cleaner, then recutting it to open up the 

design ❖ Black Ops finish has a machined surface that has been treated for strength and hardness, then remachined 

and anodized for a spectacular black-on-black contrast ❖ Made in the U.S.A. 

$474.99 


FOR BIG TWIN 93-06 MODELS W/ STOCK CV CARB, SOFTAIL 01-12 MODELS, 

DYNA GLIDE 04-12 MODELS, FLT 02-07 MODELS W/ DELPHI EFI 




FOR BIG TWIN 93-06 MODELS W/ S&S E OR G CARB 




Speed 5 

Speed 7 Chrome 

18-6079 

VENTURI AIR CLEANERS 

Exposed filter design ❖ Promotes better 

air flow ❖ Backing plate delivers air into 

carb and throttle body ❖ Internal crank 

case breathers are built-in ❖ Includes K&N 

air filter and mounting hardware ❖ Mission 

and Ronin air cleaners match Roland Sands 

Design wheels; see TIRES/WHEELS section 

❖ Optional rain sock and repl. air filter fit 

Judge 

any RSD venturi air cleaner; sold separately 

❖ Optional Venturi faceplate kit allows you to 

change any existing RSD Venturi air cleaner faceplate to a new design; 

fit RSD Venturi air cleaners only; sold separately ❖ Made in the U.S.A. 

DESCRIPTION CONTRAST CUT CHROME BLACK OPS PLATINUM CUT 

FOR BIG TWIN 93-06 W/ STOCK CV CARB, SOFTAIL 01-12 W/ DELPHI EFI , 

DYNA GLIDE 04-12 W/ DELPHI EFI, FLT 02-07 

Speed 5 18-5595 18-5594 - - 

Speed 7 18-4105 18-4104 18-6112 18-5158 

Mission 18-4942 - - - 

Ronin 18-4948 - - - 

Turbo 18-5162 18-5163 - - 

Domino 18-5170 - - - 

Judge 18-5174 - 18-6108 - 

Boss 18-5483 - 18-5479 - 

Slam 18-5491 - 18-5487 - 


Speed 7 18-4954 18-4955 18-6114 18-5161 

Mission 18-4956 - - - 

Ronin 18-4958 - - - 

Turbo 18-5168 18-5169 - - 

Domino 18-5173 - - - 

Judge 18-5177 - 18-6110 - 

Boss 18-5486 - 18-5482 - 

Slam 18-5494 - - 18-5490 

DESCRIPTION CONTRAST CUT CHROME PLATINUM CUT BLACK OPS BLACK 

Speed 5 49-7116 49-7117 - - - 

Speed 7 49-7118 49-7120 49-7119 49-7950 - 

Mission 49-7121 - - - - 

Ronin 49-7122 - - - - 

Domino 49-7123 - - - - 

Mission Ronin 

VENTURI AIR CLEANERS 






FOR XL 91-12 W/ CV CARB/DELPHI EFI 




AIR CLEANERS 

$407.99 

OPTIONAL VENTURI FACEPLATE KITS 

Boss Black Ops 

Slam Black Ops 

RAIN SOCK 

$28.99 

PART NO. 30-6196 

Slam 

REPL. AIR FILTER 

$69.99 

PART NO. 30-6357 

DESCRIPTION CONTRAST CUT CHROME BLACK OPS PLATINUM CUT 

FLHT/FLHR/FLHX/FLTR/FLHTCUTG/FLHXXX 08-12 

Speed 5 18-5601 18-5600 - - 

Speed 7 18-4107 18-4106 18-6111 18-5159 

Mission 18-4940 - - - 

Ronin 18-4946 - - - 

Turbo 18-5164 18-5165 - - 

Domino 18-5171 - - - 

Judge 18-5175 - 18-6107 - 

Boss 18-5484 - 18-5480 - 

Slam 18-5492 - 18-5488 - 

FOR XL 91-06 W/ CV CARB, XL 07-11 W/ DELPHI EFI 

Speed 5 18-5603 18-5602 - - 

Speed 7 18-4109 18-4108 18-6113 18-5160 

Mission 18-4944 - - - 

Ronin 18-4950 - - - 

Turbo 18-5166 18-5167 - - 

Domino 18-5172 - - - 

Judge 18-5176 - 18-6109 - 

Boss 18-5485 - 18-5481 - 

Slam 18-5493 - 18-5489 - 

$142.99 

DESCRIPTION CONTRAST CUT CHROME PLATINUM CUT BLACK OPS BLACK 

Judge 49-7124 - - 49-7949 - 

Turbo 49-7125 49-7126 - - - 

Turbine 49-7655 49-7656 - 49-7657 49-7654 

Boss 49-7605 - - - 49-7604 

Slam 49-7607 - - - 49-7606 


TECHNICAL 



Boss 

Turbo 

Domino 

505 

F 

U 

E 

L 

/ 

I 

N 

T 

A 

K 

E

F 

U 

E 

L 

/ 

I 

N 

T 

A 

K 

E 

TURBINE AIR CLEANERS 

Better airflow with an exposed filter ❖ Backing plate 

designed to improve airflow to carb ❖ Features 

internal crankcase breathers ❖ Center nose cone is 

laser engraved ❖ Includes K&N air 

filter and mounting hardware 



FOR BIG TWIN 93-06 W/ STOCK CV CARB, SOFTAIL 

01-12, DYNA GLIDE 04-12, FLT 02-07 W/ DELPHI EFI 

Black 18-5315 





Black 18-5324 

HIGH PERFORMANCE 

DRAGTRON II AIR CLEANERS 

Tried and true performance from Drag Specialties ❖ Die-cast 

aluminum air cleaner is shaped to complement Harley’s V twin design 

while boosting power ❖ Radius entry backing plate designed to 

maximize airflow and horsepower ❖ Washable filter is encased in a 

heavy stainless steel mesh and is designed for easy servicing ❖ Come 

with stainless steel hardware; mounting brackets required, 

available separately 

NOTE: Big Twin L92-12 and XL 91-12 require breather kit, or order complete adapter with 

breather PART NO. 18-3984 for XL 07-12, PART NO. H27-109 for Big Twin, PART NO. 

H30-0820 for XL 91-06. 

NOTE: Crankcase breather vent hose may be used with any of these air cleaners. 

U.S. Design Patent No. 305,149; Taiwan Patent Pending. 


Big Twin 90-06, XL 88-06 w/ CV carb, XL 07-12 w/ EFI 

Big Twin 01-12 w/ Delphi EFI (except FLHR, FLHT, FLHTCUTG, 

H30-0901 $84.95 

FLHX, FLHXXX, FLTR 08-12) H30-09011 84.95 

FLHR, FLHT, FLHTCUTG, FLHX, FLHXXX, FLTR 08-12 H30-09012 84.95 

Repl. K&N filter element 

1 Requires adapter PART NO. 18-4452, PRICE $21.95. 

2 Requires adapter PART NO. 18-4451, PRICE $26.95. 

30-1242 37.99 

506 

$69.95 

$407.99 

H30-0901 

18-5315 

AIR FILTER 

UPGRADE KIT 

FOR TWIN CAM 99-12 

WITH FACTORY PERFORMANCE 

FILTER (EXCEPT FLHR/FLHT/FLHX/ 

FLTR/FLHTCUTG/FLHXXX 08-12) 

Specially designed, pleated-fabric 

filter is 5 /8” deeper than the 

factory performance filter OEM 

NO. 29440-99C it replaces 

❖ Added surface area increases airflow up to 9% and boosts power 

❖ Washable filter sold in a kit with mounting hardware ❖ Quickly 

installs on any Twin Cam engine equipped with the factory 

performance filter; fits under the stock air cleaner cover 



FOR BIG TWIN 93-06 W/ S&S E OR G CARB (CONT) 





Black 18-5318 



PART NO. 30-5070 

AIR CLEANER SCRUB BAG 

Keep water out of the engine when you 

are washing your bike ❖ Waterproof 

denier construction ❖ Elastic enclosure 

❖ Should not be used when engine is 

running ❖ Made in the U.S.A. 

$30.99 

RAIN SOCK 

Keep water out of your engine when 

riding in the rain ❖ Fits RSD Venturi and 

Turbine air cleaners ❖ Allows in air, yet 

keeps out water and grime ❖ Simple to 

install – stretches over air cleaner 


$28.99 


FOR FLHT/FLHR/FLHX/FLTR/FLHTCUTG/FLHXXX 08-12 (CONT) 


FOR XL 91-12 W/ CV CARB/DELPHI EFI 

Black 18-5321 




PART NO. 30-6510 

“BOB” RETRO-STYLE 

AIR CLEANER 

5 

DESCRIPTION 

For Big Twin 90-12 and XL 88-12 with CV carb or Delphi EFI 


(except FLHT/FLHR/FLHX/FLTR/FLHTCUTG/FLHXXX 08-12) 18-3270 $64.95 

For S&S E and G series carburetors 18-3271 64.95 

Repl. air filter element 30-5188 14.95 

1 /2” diameter retro-style chromeplated 

air cleaner ❖ Foam filter 

element is reuseable ❖ Includes 

all necessary mounting hardware 

❖ Replacement filter element sold 

separately ❖ Must use appropriate 

carb support bracket (sold separately) 

18-3271 

AIR FILTER UPGRADE KIT 

FOR FLHR/FLHT/FLHX/FLTR/FLHTCUTG/ 

FLHXXX 08-12 

Upgrade your factory performance air 

cleaner kit OEM NO. 29260-08 with this 

easy-to-install air filter kit ❖ Includes a 

high-quality 3” deep, washable/reusable filter element with 60% 

greater surface area than the factory performance cleaner, along with 

required longer mounting hardware 


$69.95 

18-5769 

18-5319 

PART NO. 30-6511 

PART NO. 30-5880 


TECHNICAL 



18-5320

18-5454 

18-5455 

18-5967 

HIGH-PERFORMANCE AIR CLEANER ASSEMBLIES 

High performance, high quality and a super-clean design ❖ Compact design improves leg clearance over the stock air cleaner assembly 

❖ All-CNC-machined billet aluminum construction and a genuine K&N 4” diameter high-flow filter, held together with high-strength 12-point 

mounting bolts ❖ Features Joker’s exclusive “baffle plate” internal crankcase breathing system ❖ Available in black anodized, clear anodized 

(silver) and chrome-plated finishes ❖ Made in the U.S.A. 


FOR TWIN CAM MODELS 99-06 W/ CV CARB AND TWIN CAM MODELS 01-12 

W/ DELPHI EFI (EXCEPT FLHT/FLHTCUTG/FLHR/FLHX/FLHXXX/FLTR 08-12) 

Smooth, black anodized 18-5454 $274.99 

Smooth, chrome 18-5455 284.99 

Finned, black anodized 18-5456 274.99 

Finned, chrome 18-5457 284.99 

Joker Racing, black anodized 18-5964 274.99 

Joker Racing, chrome 18-5965 284.99 

JM U.S.A., black anodized 18-5967 274.99 


FOR XL MODELS 07-12 (EFI) 

Finned, black anodized 18-5458 $236.99 


Joker Racing, black 18-5530 236.99 


Smooth, black anodized 18-4834 236.99 


Smooth, clear anodized 18-4836 236.99 

18-5457 


FOR XL MODELS 91-06 (CV CARB) 

Finned, black anodized 18-5460 $236.99 


Joker Racing, black 18-5532 236.99 


Smooth, black anodized 18-4837 236.99 


Smooth, clear anodized 18-4839 236.99 

18-5523 18-5524 18-5525 18-5526 18-5527 18-5528 

HIGH-PERFORMANCE DIAMOND AIR CLEANER ASSEMBLIES 

All CNC-machined billet aluminum construction with a super-clean design centered around 

a genuine K&N 4” diameter high-flow air filter ❖ Features Joker’s exclusive “baffle plate” 

crankcase breathing system ❖ Held all together with high-strength 12-point alloy mounting 

bolts ❖ Compact design improves leg clearance ❖ Choice of hard black anodized and 

chrome finishes ❖ Made in the U.S.A. 


FOR TWIN CAM MODELS 99-06 W/ CV CARB AND TWIN CAM MODELS 01-12 

W/ DELPHI EFI (EXCEPT FLHT/FLHTCUTG/FLHR/FLHX/FLHXXX/FLTR 08-12) 

Finned, black 18-5523 $274.99 


Smooth, black 18-5524 274.99 

Behind the 8 Ball, black 18-5525 274.99 

JM U.S.A., black 18-5526 274.99 

Money to Burn, black 18-5527 274.99 

Joker, black 18-5528 274.99 


FOR TWIN CAM 99-12 OVAL AIR CLEANER 

(EXCEPT DYNA 08-12) 

Ball-milled 30-4117 $66.99 

Hot Head 49-1843 66.99 

Joker 49-1844 66.99 


18-5456 


FOR TWIN CAM MODELS 99-06 W/ CV CARB AND TWIN CAM MODELS 01-12 W/ 

DELPHI EFI (EXCEPT FLHT/FLHTCUTG/FLHR/FLHX/FLHXXX/FLTR 08-12) (CONT) 

Lucky 7, black 18-5529 $274.99 

FOR XL MODELS 07-12 (EFI) 

Finned, black 18-5534 246.99 


JM U.S.A., black 18-5538 246.99 

49-5166 


FOR TWIN CAM 99-12 OVAL AIR CLEANER 

(EXCEPT DYNA 08-12)(CONT) 

Finned, black 49-7312 $65.99 

Flame H49-328 66.99 

Smooth H49-329 66.99 


TECHNICAL 



18-5530 

18-5529 18-5535 


FOR XL MODELS 07-12 (EFI) (CONT) 

Joker, black 18-5540 $246.99 

Smooth, black 18-5542 246.99 

FOR XL MODELS 91-06 (CV CARB) 

Finned, black 18-5536 246.99 


JM U.S.A., black 18-5539 246.99 

Joker, black 18-5541 246.99 

Smooth, black 18-5543 246.99 

49-1843 49-1844 

49-7312 H49-320 H49-329 

H49-322 

CHROME BILLET AIR CLEANER INSERTS 

FOR 84-12 OEM AIR CLEANERS 

Dress up that air cleaner ❖ Sold each ❖ Made in the U.S.A. 


FOR EVOLUTION 84-99 ROUND AIR CLEANER 

Flame H49-320 $77.99 

Joker H49-322 77.99 

Smooth H49-323 77.99 

507 

F 

U 

E 

L 

/ 

I 

N 

T 

A 

K 

E

F 

U 

E 

L 

/ 

I 

N 

T 

A 

K 

E 

18-4780 

18-4781 

SCARAB AIR 

CLEANER COVERS 

Allows additional airflow 

through the chrome grille 

openings ❖ Contoured 

design adds a racy touch ❖ Stylish upgrade 

for the OEM air cleaner assembly 

$66.99 


FLHT, FLHR, FLTR, FLHX and FLHXXX, FLHTCUTG 02-12 (except CA models w/ carburetor), FXST/ 

FLST 01-12 (except FLSTSB 08-11 and CA models w/ carburetor), FXD 04-07 w/ fuel injection 18-4780 

FXD 99-03; FXD, FXDX 04-05 (CA model only), FLHT, FLHR, FLTR, FLHX 99-06 (CA models only), 

FLHTI 02-05 (CA model), FXST/FLST 00-06 (CA models) 18-4781 

AIR CLEANER 

INSERTS 

FOR TWIN CAM 

99-12 (EXCEPT 

DYNA 08-12) 

Mount directly over 

factory air cleaner covers ❖ Billet 

aluminum inserts available in three 

styles: Retro, Grooved and Smooth 

❖ Sold in pairs 

508 

49-6343 


Retro 18-4676 

49-6344 

49-6963 49-7813 49-7814 

AIR CLEANER INSERTS 

FOR TWIN CAM 99-12 W/ STOCK 

AIR CLEANER COVER (EXCEPT DYNA 08-12) 

Unique, custom inserts in three designs ❖ 6061 T-6 

aluminum construction ❖ Choose from two finishes: 

chrome or black-anodized with re-machined accents 

❖ Simple installation ❖ Made in the U.S.A. 

DESCRIPTION CHROME PART NO. BLACK W/ RE-MACHINED ACCENTS PRICE 

Lefty 49-6344 49-6343 $89.99 

Waterfall 49-6350 49-6963 100.99 

Cross 49-7814 49-7813 89.99 


Grooved 18-4677 


SKULLCAP 

Chrome 18-5423 $44.99 

Black 18-5422 53.99 

18-4676 

49-6350 

$66.99 



SKULLCAP 


FOR 99-12 OEM TWIN CAM 

AIR CLEANER (EXCEPT DYNA 08-12) 

Perfect for VO2 Naked air intake, Screamin’ Eagle or other 

aftermarket air cleaners with a round filter element and 

center-bolt mount ❖ Stamped steel construction features 

subtle creasing reminiscent of an old-school mag wheel 

❖ Choose from brilliant chrome or black ceramic finish 

18-4780 

18-5422 

8” AIR 

CLEANER 

COVER 

Chrome-finished, 

die-cast aluminum 

air cleaner cover available in a smooth style ❖ Fits Ness Stage I 

and II “Big-Sucker” kits as well as Big Twin Screamin’ Eagle backing 

plates ❖ Made in the U.S.A. 

$75.99 PART NO. H49-761 

18-4083 

18-6057 18-6058 18-6059 


FOR 99-12 OEM TWIN CAM AIR CLEANER 


CNC-machined billet aluminum construction ❖ Made 

in the U.S.A. 


FINNED 

Gloss black powdercoat 18-4083 $123.99 

Chrome 18-4084 123.99 

Black w/ diamond edge 18-4417 170.99 

MILLENIUM AIR 

CLEANER INSERTS 



WITH OEM AIR CLEANER 

Custom inserts bolt-on to aftermarket or OEM air cleaner ❖ Billet 

aluminum construction with a chrome finish ❖ Available in ball-milled 

or smooth 

$75.99 

18-5423 


SKULLCAP CROWN 

Chrome 18-6089 $44.99 

Black 18-6090 44.99 

18-4084 18-4417 


Ball-milled H49-333 


MACHINE HEAD 

Gloss black powdercoat 18-6057 $151.99 

Chrome 18-6058 151.99 

Black w/ diamond edge 18-6059 208.99 

H49-333 

H49-764 


Smooth H49-764 

18-6089 18-6090 


TECHNICAL 


www.denniskirk.com

49-7794 

JACK DANIEL’S AIR CLEANER TRIM 

XL 04-12 

Feature the Jack Daniel’s Old No. 7 logo ❖ Made 

from aluminum, then chrome-plated ❖ Available in all 

chrome or chrome with raised black paint 

❖ Replaces OEM NO. 29642-04 

$36.95 

“LIVE TO RIDE” AIR 

CLEANER INSERT 

Die-cast construction with chrome 

finish ❖ Fits OEM air cleaner on XL 04-11 models 

$42.95 

FIVE-BOLT DOMED 

AIR CLEANER INSERT 

FOR TWIN CAM 99-12 (EXCEPT DYNA 08-12) 

Quality die-cast construction; fits OEM air cleaners ❖ Chrome-finished 

insert matches five-bolt style of OEM derby cover 

$37.95 

18-5252 18-5253 

AIR CLEANER ADAPTERS 

Kit lets you install an L.A. Choppers xXx air cleaner or Baron Big Air 

Kit to a Mikuni or S&S carburetor ❖ Works for other air cleaner kits 

designed to mount stock CV carburetors ❖ Constructed from T-6061 

billet aluminum ❖ Made in the U.S.A. 


For Mikuni HSR42/45 carburetors 18-5252 

18-3567 

49-7795 


Chrome/black 49-7794 


PART NO. 49-5077 



For S&S carburetors 18-5253 

JACK DANIEL’S AIR 

CLEANER INSERTS 

Classic Jack Daniel’s logo or 

the Old No. 7 logo adds style 

to the custom look of your bike 

❖ Available in polished or black powder-coated chrome 

49-4354 

DESCRIPTION 

BIG TWIN EVO 84-99, 8” ROUND 


Classic chrome 49-3486 $18.99 

Old NO. 7 chrome/black 49-3487 18.99 

TWIN CAM 99-12 (EXCEPT DYNA 08-12), W/ OVAL AIR CLEANER 

Old NO. 7 classic chrome 49-4375 39.99 

Old NO. 7 chrome/black 49-3945 39.99 

Old NO. 7 black 49-4354 39.99 

AIR CLEANER ADAPTERS 

Installation of a Dragtron II air cleaner 

(H30-0901) to models listed is allowed 

❖ Plain machined finish 

$37.99 DESCRIPTION PART NO. PRICE 

H27-113 


Big Twin 90-12 (except FLHR/FLHT/FLHX/FLTR/FLHTCUTG/FLHXXX 08-12) H27-113 1 $33.95 

Big Twin Evolution 84-89 (use gasket PART NO. H26-362) H30-0815 24.95 

FLHT/FLHR/FLHX/FLTR/FLHTCUTG/FLHXXX 08-12 18-4453 29.95 

XL 07-12 18-3567 1 29.95 

49-3486 

FLHT, FLHX, FLHR, FLTR, FLHXXX, FLHTCUTG 08-12 models 18-4451 $26.95 

For 01-12 models w/ Delphi EFi (except FLHT/FLHX/FLHR/FLTR/ 

FLHTCUTG/FLHXXX 08-12) 18-4452 21.95 

CHROME AIR CLEANER SUPPORT BRACKETS 

No need to fabricate your own support bracket when upgrading the stock air cleaner on your post-85 Evolution 

with an aftermarket air cleaner ❖ Works with Dragtron II or any flat-backed air cleaner ❖ See footnote for important 

fitment information ❖ All but PART NO. H30-0815 come complete with gaskets and hardware 

49-3945 

STOP-N-POP BOTTLE OPENER 

FOR TWIN CAM 99-12 WITH STOCK AIR CLEANER COVER 

Aluminum base construction with stainless steel bottle opener 

❖ Bottle opener is polished finish, base is ball-finished ❖ Installs 

using original air cleaner center mount bolt; mounting hardware for 

bottle opener included ❖ Adds functionality and fun in just minutes 


$27.99 PART NO. 49-7702 

18-4451 

18-4452 

H30-0815 H30-0824 


XL 88-06 H30-08241, 2 $24.95 

Repl./additional gasket (repl. OEM NO. 29058-77 (James Gaskets)) 

1 Use gasket PART NO. 26-3986, $.99. 

2 XL models 93-03 require breather kit PART NO. H30-900, $47.95. 

H26-362 .99 


TECHNICAL 



509 

F 

U 

E 

L 

/ 

I 

N 

T 

A 

K 

E

F 

U 

E 

L 

/ 

I 

N 

T 

A 

K 

E 

NOTE: 84-06 air filters with a flat backing plate may have a Screamin’ Eagle air filter kit and will require a Screamin’ Eagle repl. filter element. 

K&N 

OEM 

MODEL 

FOR BIG TWIN 

Twin Cam 99-07 carb, Softail EFI 01, and 

EFI (all) 02-12 models (except Touring/ 

REFERENCE NO. REFERENCE NO. PART NO. PRICE 

Dyna/FLSTSB 08-12) HD-1499 29461-99 30-4486 $74.95 

Twin Cam Touring EFI 99-01 

FLHT/FLHR/FLTR/FLHX/FLHTCUTG/ 

HD-8899 29462-99 30-4488 77.95 

FLHXXX 08-12 - 29633-08 30-5621 69.95 

FXD, FXDB, FXDC, FXDF, FXDL, FXDWG 08-12 - 29191-08 30-6260 69.95 

FLHTCUSE/FLHRSE Screamin’ Eagle 08-11 - 29244-08 30-5622 52.95 

Evolution (w/ EFI) 95-98 HD-1395 29291-95 30-4485 71.95 

Evolution (carbureted) 90-99 HD-1390 29259-1A , 

29330-96 

30-4484 59.95 

Evolution (carbureted) 86-89 HD-2086X 29259-86 30-4487 45.95 

V-Rod 02-09 (all) - 29437-01 30-5073 67.95 

NOTE: Not for use with S&S Super B or Super D carburetors, or Super E and G Kits for Buells. 

510 

30-5465 

30-4487 

30-4482 

30-4479 30-4480 30-4481 

30-4483 30-4484 30-4485 

30-4488 30-4755 

30-5621 

REUSABLE AIR FILTERS 

Save money with this 100% reusable and washable filter ❖ Interior wire mesh design increases airflow and 

gives top filtration performance ❖ Four layers of surgical-grade cotton ❖ Tough anti-crack and anti-curl urethane 

body ❖ Made in the U.S.A. 

HIGH-FLOW AIR FILTER 

AND ADAPTER KIT 

Designed especially for Super E and G carburetors 

❖ High-flow filter is 1” taller than standard filter 

and features a low-restriction, pre-oiled filter 

element ❖ Allows for a 37% increase in airflow 

❖ Filter and adapters extend the teardrop housing 

out 1” for better exposure and a high-performance 

street racer look ❖ Kit installs in minutes; no 

permanent modifications required ❖ Made in the U.S.A. 

30-5622 


For S&S Super E and G carbs 30-4495 $47.99 

Repl. high-flow filter for S&S Super E and G carbs (also fits S&S air cleaners for stock 

carbs and EFI throttle bodies) 30-6799 20.99 

30-5072 

30-6260 

30-4486 

30-5073 

30-6297 

K&N 

OEM 

MODEL 

FOR XL 

REFERENCE NO. REFERENCE NO. PART NO. PRICE 

XL Evolution 04-12 HD-8834 29331-04 30-5465 $67.95 

XL Evolution 88-03 

FOR AFTERMARKET AIR CLEANERS 

HD-1388 29036-88/A/B, 

29331-96 

30-4483 65.95 

S&S D teardrop air filter E-3224 - 30-4479 31.95 

S&S B (6” x 23 /16”) air filter E-3225 - 30-4480 31.95 

S&S Super E and G series carb air filter E-3226 - 30-4481 31.95 

Screamin’ Eagle air filter (Evolution Big Twin) HD-0600 29055-89 30-4482 45.95 

Screamin’ Eagle air filter (Twin Cam) stage 1 HD-0700 29442-99A 30-4755 47.95 

Screamin’ Eagle air filter Dyna 08-11 

Arlen Ness Stage 1 Big Sucker/Billet Sucker 

- 29385-08 30-6297 37.95 

air filter for CV carb or Delphi EFI HD-0700 29442-99A 30-4755 47.95 

Screamin’ Eagle XL 04-11 - 29044-04 30-5072 64.95 

30-4495 

REPLACEMENT FILTER ELEMENT 

Replacement 3” dia. filter element ❖ Fits 

HSR42/45/48 carburetor 

$71.99 

PART NO. 30-5384 


TECHNICAL 


www.denniskirk.com

30-3087 

30-4490 

30-568 

30-5459 

30-566 

HIGH FLOW AIR FILTERS 

Outstanding airflow ❖ Special cotton fabric acts as a medium for oil suspension, plus a 

molded rubber sealing surface provides an airtight fit ❖ Pleated accordion design allows for 

optimum filtration ❖ Available for most stock replacement applications, as well as S&S and 

Dragtron II air cleaners ❖ Available for a variety of Harley models; see chart on next page 


30-566 $56.99 

30-567 46.99 

30-568 48.99 

30-569 38.99 

30-571 37.99 

30-643 48.99 

30-654 45.99 

30-828 

30-1059 


30-1002 $23.99 

30-1059 17.99 

30-1060 17.99 

30-1061 17.99 


30-656 $47.99 

30-658 47.99 

30-1074 41.99 

30-1242 37.99 

30-1388 41.99 

30-3087 70.99 

30-3088 64.99 

30-830 30-831 

30-1060 


30-1062 $16.99 

30-1063 23.99 

30-1223 17.99 

30-1224 16.99 


30-3135 $72.99 

30-3179 55.99 

30-3524 62.99 

30-4490 58.99 

30-4494 65.99 

30-4762 67.99 

30-4763 61.99 

30-1061 


30-1558 $25.99 

30-1559 21.99 

30-1608 29.99 

30-4637 44.99 

30-832 

30-1062 


30-4795 $53.99 

30-5459 59.99 

30-5460 60.99 

30-5466 52.99 

30-5529 49.99 

30-5725 56.99 

30-5736 75.99 

30-833 


30-4638 $34.99 

30-4923 32.99 

30-5576 21.99 

30-5814 36.99 


30-5878 $66.99 

30-5879 66.99 

30-5929 75.99 

30-6123 53.99 

30-6911 66.99 

30-7121 57.99 

H30-135 77.99 

30-834 

30-4638 

30-1558 

30-1559 30-1608 30-4637 

30-4923 

30-5576 

AIR FILTER ELEMENTS 

UNI, the OEM supplier to Harley-Davidson, features a complete line of replacement air filter elements❖ Elements are 

available for the popular S&S and Drag Specialties Dragtron cleaners ❖ UNI elements are made of a unique, open-cell 

polyurethane material, allowing maximum airflow while still providing superior filtration ❖ Available for a variety of Harley 

models; see chart on next page ❖ Made in the U.S.A. 

30-6399 30-6400 30-6401 30-6402 30-6403 

30-1063 30-1223 


30-828 $17.99 

30-830 17.99 

30-831 16.99 

30-832 16.99 

30-6406 30-6407 30-6408 30-6409 

30-6410 

AIR FILTER ELEMENTS 

Superior fitration through a unique open-cell polyurethane foam for greater airflow and improved dirt-holding 

capacity ❖ Available for a variety of Harley models; see chart on next page ❖ Made in the U.S.A. 


30-6399 $16.99 

30-6400 21.99 

30-6401 16.99 


30-6402 $17.99 

30-6403 17.99 

30-6404 21.99 


30-6405 $23.99 

30-6406 58.99 

30-6407 61.99 

30-6404 


30-6408 $36.99 

30-6409 68.99 

30-6410 37.99 

30-654 

30-6911 


H30-136 $81.99 

H30-200 51.99 

H30-426 35.99 

H30-651 38.99 

30-1002 

30-1224 

30-5814 


30-833 $17.99 

30-834 17.99 

30-6405 

30-6411 30-6412 


30-6411 $54.99 

30-6412 41.99 


TECHNICAL 



511 

F 

U 

E 

L 

/ 

I 

N 

T 

A 

K 

E

F 

U 

E 

L 

/ 

I 

N 

T 

A 

K 

E 

MODEL & YEAR 

BIG TWIN 

OEM NO. K&N UNI 

MOTOR 

FACTORY 

Dyna 08-12 (all) - 30-5929 - - 

Touring 08-12 (all) 

Twin Cam 99-07 carb, Softail EFI 01, and EFI (all) 

- 30-5736 - 30-6411 

02-12 models (except Touring/Dyna/FLSTSB 08-12) 29461-99 H30-135 - 30-6406 

Twin Cam Touring EFI 99-01 29462-99 H30-136 - 30-6407 

Evolution 93-99 Carb 29259-89/91, 

29330-96 30-3088 30-1558 30-6405 

Evolution EFI 95-98 29291-95 30-3135 - - 

Evolution 90-92 Carb 29259-89/91A 30-3088 30-1063 30-6400 

Evolution (including FLT, FLHT) 86-89 29259-86 30-568 30-1061 30-6403 

Evolution (not FLT) 84-85 29259-83A 30-658 30-833 - 

FLT, FLHT 83-85 29288-83 - 30-834 - 

FXR 82-83 29255-78 - 30-1059 - 

FLT 80-82 29255-78 - 30-1059 - 

FX, FL, FLH L78-84 29255-78 - 30-1059 - 

FX, FL (31 /2” W) 77-E78 29086-75 30-656 30-828 - 

FX, FL, FLH (3” W) L75-76 29086-73 - 30-830 - 

FX, FL, FLH 67-E75 29036-72 30-654 30-828 - 

74”, 45” 41-66 29036-41 30-571 30-831 - 

V-Rod 02-09 (all) 

SPORTSTER 

- 30-4494 30-5814 - 

XL Evolution 04-12 - 30-4762 - 30-6409 

XL Evolution 04-12 (fits w/ Screaming Eagle kit only) 29044-048 30-5466 - - 

XL Evolution 88-03 29036-88A/88B 30-3087 30-1002 30-6404 

XL Evolution 86-87 29036-86 30-567 30-1060 30-6402 

XL 1000 83-85 29036-72 30-654 30-828 - 

XL 1000 L78-82 29255-78 - 30-1059 - 

XL 1000 (31 /2” W) L75-E78 29086-75 30-656 30-828 - 

XL 1000 (3” W) L73-E75 29036-73 - 30-830 - 

XL 900, 1000 66-E73 29036-72 30-654 30-828 - 

XR 1200/X 08-12 

BUELL 

29377-08 30-6911 - - 

96-02 (All except S2/S2T 96 and Blast 00-02) - 30-3179 30-1608 - 

Blast 00-09 - 30-3524 - - 

XB9/12 03-06 models - 30-4490 30-4923 - 

18-2805 

18-2806 

BLUEGRASS BREATHER KITS 

Simple, effective way to keep the oil in the bike ❖ Engines that vent 

crankcase through the cylinder heads also expel oil through the same 

passages; venting directly into the air cleaner can result in an oily 

mess on the side of the bike ❖ Banjo fittings and round tubes route 

vented gasses from cylinder head upward so gravity can keep any 

expelled oil droplets in the engine where they belong ❖ Can vent the 

crankcase to open air by running the vent line up and out of sight 

under the fuel tank, or use the optional catch tank 

$46.99 


Fits Twin Cam 99-06 w/ Mikuni HSR series carb; 

Evolution Big Twin 93-99 w/ Mikuni HSR series carb; XL models 91-06 18-2805 $52.99 

Fits Twin Cam 99-12 w/ Delphi EFI and most carbs (except FLHT/ 

FLHR/FLTR/FLHX/FLHTCUTG/FLHXXX 08-12 and Mikuni HSR); 

Evolution Big Twin 93-99 w/ most carbs (except Mikuni HSR) 18-2807 52.99 

Catch tank 18-2806 49.99 

512 

CRANKCASE BREATHER KIT 


(EXCEPT FLHT/FLHR/FLTR/FLHX, 

FLHXXX/FLHTCUTG 08-12) 

Installs between the air cleaner and 

carb support bracket ❖ Uses stock 

breather bolts and vent hoses 

❖ Included with Hypercharger 

$37.99 PART NO. 18-4782 

® kits for 

Twin Cam models 

AIR FILTER APPLICATIONS 

MODEL & YEAR 

BUELL (CONT) 

OEM NO. K&N UNI 

MOTOR 

FACTORY 

1125CR/R 08-10 

AFTERMARKET 

- 30-6123 - - 

Drag 7” round air cleaner (H30-0905) - 30-571 30-831 - 

Dragtron air cleaner - - 30-1062 - 

Dragtron II air cleaner - 30-1242 30-5576 - 

Edelbrock repl. air filter - 30-1388 - - 

Edelbrock dual carb repl. air filter 

Evo reverse tapered: 

- H30-426 - - 

7” dia. (top) x 61 /4” dia. (base) x 23 /4” (tall) 

Evo reverse tapered: 

- 30-5459 - - 

7” dia. (top) x 61 /4” dia. (base) x 31 /4” (tall) 

40-44mm Mikuni carb 

- 30-5460 - - 

(23 /4” clamp-on flange) chrome end cap 

Indian repl. filter 6” OD x 4 

- 30-566 - - 

5 /8” ID x 23 /4” H 

fits stock S&S teardrop back and Indian 

teardrop cover (Indian cover not included) 

Mikuni 36-38mm dirt track air filter 

- 30-5725 - - 

“D” oval: 7” L, 10° angle, 21 /8” flange 

Mikuni 36-38mm dirt track air filter oval; 

- 30-5529 - - 

7” Length; 10° angle; 1” flange - 30-643 - - 

S&S “D” teardrop air cleaner (6” x 2”) - H30-651 - 30-6401 

S&S dual throat carb air cleaner - - 30-1223 - 

S&S E or G (6” x 23 /8”) - 30-1074 30-1224 30-6399 

S&S old style air cleaner (6” x 23 /16”) - 30-569 30-832 - 

6” custom filter 

Screamin’ Eagle for 09-11 

- - 30-1559 - 

Ventilator element, 10-11 CVO 29670-09 30-7121 - - 

Stage 1 Screaming Eagle filter for Dyna 08-11 

Stage 1 Screaming Eagle repl. 

- 30-5878 - - 

filter for FLT, FLHT, FLHR, FLHX, FLTR 08-11 - 30-5879 - 30-6412 

Stage 1 Screaming Eagle air filter for Big Twin 89-98 - H30-200 30-46371 30-6408 

Stage 1 Screaming Eagle air filter for Big Twin 99-05 - 30-4795 30-46382 30-6410 

Stage 2 Screaming Eagle air filter for Big Twin 99-05 - 30-4763 - - 

1 Early model filter has a zinc-plated metal lid with three-hole mount and center threaded hole. 

2 Late-model version is a complete round unit with no lid. 

CHROME 

CRANKCASE 

BREATHERS 

Great looking 


solves a problem 

H-D has been 

plagued with since 

converting to 

their “overhead” 


in 1993 – oil 

being ejected into 

the air filter from 

the breather ❖ As 

oil-laden air condenses H30-222 

in the breather body, the 

excess oil now runs back 

down into the engine through 

the breather bolts, rather than 

running into the air cleaner, to be 

blown all over the bike ❖ Fits Big 

Twin Evolution and Twin Cam models 

with CV carbs ❖ When replacing an existing Küryakyn crankcase 

breather with this chrome model, a spacer (PART NO. H30-182) 

must also be used 


Evolution Big Twin models 93-99 (except EFI models) H30-222 $59.99 

Twin Cam models 99-06 (except EFI models) H30-223 56.99 

HYPERCHARGER 

REPLACEMENT RUBBER BOOTS 

FOR CRANKCASE BREATHER KITS 

For use with any Küryakyn Hypercharger crankcase 

breather kit ❖ Sold in pairs 

$5.99 PART NO. 30-4473 


TECHNICAL 


www.denniskirk.com

BRAIDED HOSE 

CRANKCASE 

BREATHER KIT 

FOR BIG TWIN 93-12 CUSTOMS 

Provides the best-looking 

alternative to black rubber hoses 

when mounting a crankcase 

breather system ❖ 3 /8” stainless 

steel braided hose crimped onto 

chrome banjo fittings ❖ The outlet 

side of the assembly is long 

enough to custom route the hose and mount the breather filter in a 

convenient location ❖ Includes breather filter (with mounting stud), 

hardware and instructions ❖ Air cleaner and carb support bracket 

must be purchased separately 

NOTE: Not recommended for stock applications. Make sure the braided line does not 

contact anything, as damage may result. (For example, the gas tank, carb or wiring.) 

$66.95 


CRANKCASE 

BREATHER REED VALVE 

FOR BIG TWIN 93-99 

EVOLUTION-STYLE ENGINES 

State-of-the-art breather is not 

dependent on the rotation of the crankshaft 

to make it open and close; instead, reeds open 

when the pressure in the crankcase becomes 

greater than the pressure in the cam chest and 

close when the pressure in the cam chest is equal 

to or greater than the pressure in the crankcase ❖ By opening and 

closing “on demand,” the reed valves automatically compensate for 

the lag time associated with accelerating the mass of air as it is 

forced out of the crankcase, increasing performance and stopping 

high-rpm oil carryover in engines with marginal piston ring seal 

❖ Installation is a snap; no aligning timing marks, and no rotating 

parts ❖ Made in the U.S.A. 


Standard 14-9439 $91.99 

BREATHER SHOP 

SERVICE KIT 

Service OEM breather systems 

❖ Includes all gaskets, seals and 

O-ring ❖ Made in the U.S.A. 

$9.99 

PART NO. 26-3610 

3 1/4” CUT-TO-LENGTH 

CHROME BREATHER BOLT KITS 

Ease mounting of a carb 

support bracket ❖ Available in 

buttonhead style ❖ Sold in pairs 

$64.99 

BREATHER 

BOLT WASHER KIT 

FOR 91-12 

BREATHER SYSTEMS 

Kit includes four 


3 /8” and four 5 /16” 

aluminum centering washers and 

four nylon sealing washers 

$8.95 


+.030” oversize 14-9440 $106.99 

18-2844 


3 /8”-16 w/ 1 /2” inserts 18-2842 

3 /8”-16 18-2843 

5 /16”-18 18-2844 

CRANKCASE 

BREATHER KITS 

Design uses 

a one-piece 

chrome tube 

❖ Breather 

bolts, washers 

and hardware 

included ❖ Can 

be used with 

H30-007 

most aftermarket air cleaners 

H30-016 


Big Twin 93-12 (except FLHT/FLHR/FLHX/FLTR, FLHXXX, FLHTCUTG 08-12) H30-016 $32.95 

XL 91-12 H30-007 29.95 

H27-109 

18-3984 

MODEL & YEAR 

Big Twin 93-12 (except FLHR/FLHT/FLHX/FLTR/FLHTCUTG/ 


FLHXXX 08-12) (carb support bracket and breather kit) 

Big Twin 93-12 (except FLHR/FLHT/FLHX/FLTR/ 

H27-109 $66.95 

FLHTCUTG/FLHXXX 08-12) (no hose or filter) H30-930 56.95 

FLHT/FLTR/FLHR-FLHTCUTG/FLHXXX 08-12 models (no hose or filter) 18-4453 29.95 

FLHT/FLTR/FLHR/FLHTCUTG/FLHXXX 08-12 18-4454 74.95 

Sportster 91-06 H30-0820 59.95 

XL 07-12 18-3984 59.95 

Repl. filter element (11 AIR CLEANER BREATHER ADAPTER KITS 

Required when an aftermarket air cleaner is installed on late model 

H-D that breathe through the heads ❖ For use with CV carburetor or 

Delphi EFI system ❖ Include support bracket, crankcase breather kit, 

gaskets and all hardware, everything necessary to upgrade to one of 

our aftermarket air cleaners except the air cleaner assembly itself 

/2” o.d. x 2”L) H30-0822 12.95 

TWIN CAM/EVOLUTION 

BREATHER BOLT KITS 

Chrome-plated hex-head 

breather bolts ❖ Fits most 

supports and breather brackets 


TC 3 /8”-16 18-6004 $16.95 

18-6004 

18-6005 


EVO 1 /2”-13 18-6005 $16.95 

BREATHER 

BOLT COVERS 

Hide the zinc 

breather bolts 

with these chromeplated 

covers 

❖ Press on and 

tighten the set 

screw for a quick, 

easy upgrade 

❖ For use on 99-12 

Twin Cam engines 

with Küryakyn 

air cleaners and 


kits, and 07-12 XL engines with Küryakyn air cleaners 

$19.99 PART NO. 18-5544 


TECHNICAL 



18-4454 

H30-930 

513 

F 

U 

E 

L 

/ 

I 

N 

T 

A 

K 

E

F 

U 

E 

L 

/ 

I 

N 

T 

A 

K 

E 

CRANK VENTS 

Increase gas mileage, horsepower and life of your motor ❖ Oneway 

flow due to check ball and valve ❖ Improve motor efficiency by 

taking blow-by out of the heads or crankcase and sucking it out the 

vent, which allows pressure to be released ❖ Stem vents are used on Evolution and Twin Cam 

engines that breathe through the heads; in-line vent is used on models that breathe through the 

crankcase ❖ Polished aluminum finish ❖ When using stem vents with any Speed’s Performance Plus 

high-velocity or Speedy Flow air cleaner, crank vent spacers are required; spacers can also be used 

to custom space other breathers and crank vents ❖ Crank vents are sold each; spacer kits include 

two .300” x .990” spacers and two .615” x .990” spacers with O-rings 


In-line vent 18-5129 $89.95 

Stem vent (two required) 18-5130 109.95 

KRANK VENT PLUS 

Installs on your crankcase 

breather hose and controls 

the air under the pistons 

❖ Maintains the proper 

amount of vacuum in the 

crankcase at any rpm 

❖ Increases pressure 

differential across the 

compression ring for a better 

seal ❖ Design gives a 2-7 horsepower increase 

and a deeper motor sound ❖ Disassembles 

easily for cleaning 

HOSE ID TOP TYPE PART NO. 

3 /8” Metal w/ stud 30-981 

3 /8” Rubber 30-3021 1 /2” Metal w/ stud 30-982 

514 

$118.99 

CRANKCASE 

VENTS 

Clamp directly to breather hose; 

vents on positive crankcase pressure, filters 

on negative pressure ❖ Metal top model comes 

with stud and nut for mounting ❖ Rubber top model 

comes with no stud ❖ Measure 2” dia. x 1 1 /2” H 

$25.99 

H18-093 

PART NO. H30-0705 

H30-0700 

30-302 


Spacer kit for Twin Cam-style motors 18-5133 $39.99 

Spacer kit for EVO-style motors 18-5134 39.99 

HOSE ID TOP TYPE PART NO. 

5 /8” Metal w/ stud 30-983 

3 /4” Metal w/ stud 30-984 

1 PRICE $24.99. 

30-981 

H30-0701 

H30-0707 

CHROME VENT FILTER 

An easy, inexpensive upgrade ❖ One-piece 

crankcase filter assembly comes complete 

with clamp and chrome die-cast mounting 

base ❖ Accepts a 


Chrome vent filter 

REPLACEMENT FILTERS 

H30-0700 $17.95 

Chrome top filter H30-0701 12.95 

Rubber top filter H30-0707 12.95 

Button head bolt filter H18-093 13.95 

3 /8” i.d. hose ❖ Replacement filters available 

MINI CRANKCASE VENT FILTER 

Washable filter with chrome end caps ❖ Measures 

1.5” dia., 1.6” H ❖ Accepts a 

$15.95 PART NO. H30-087 

3 /8” i.d. hose; has 

a 1 /4” mounting tab 

CRANKCASE 

BREATHER FILTER 

Billet aluminum 

construction with vicious 

lines ❖ For use with lower 

crankcase or rear rocker 

breather line ❖ Accepts 3 /8” hose 

❖ Complements D&M/Drag Specialties 

Spear air cleaner; see page 500 


$112.99 PART NO. 18-4917 

CRANKCASE BREATHERS/FILTER 

Crankcase breather filter kit PART NO. 30-1754 includes onepiece 

filter, die-cast mounting base and hose clamp ❖ Replacement 

filter with chrome die-cast cap PART NO. 30-1755 is for use with 

crankcase breather filter kit, PART NO. 30-1754 ❖ Black rubber 

end comes on economy crankcase breather PART NO. 30-1756; no 

replacement parts available 


Crankcase breather filter kit 30-1754 $17.99 

Repl. filter for use w/ 30-1754 only 30-1755 7.99 

Economy crankcase breather 30-1756 6.99 

THREAD REDUCER 

Reduces a 1 /2”-13 threaded hole 

to 5 /16”-18 ❖ Use on H-D 93-99 

cylinder heads when installing a 

carburetor support bracket that 

requires 5 /16”-18 mounting bolts ❖ Requires two per 

motor ❖ Sold each ❖ Made in the U.S.A. 

$5.99 PART NO. H12-001 

BLOW-BY OIL 

COLLECTOR 

Chrome-plated CNC-machined 

aluminum oil collector is designed 

to collect head or crankcase 

blow-by ❖ 1 5 /16” o.d. body, 1 1 /2” body 

length, 5 /8” nipple length, 2 1 /8” overall length 

❖ For 3 /8” hose ❖ Cleanable foam filter inside 


U.S. Patent #5.972.213/399.299. 

$41.99 

18-5129 

18-5130 


TWIN CAM VENT LINES 

Get rid of that old stock vent line 

❖ Nothing tops the high-luster chrome 

finish ❖ A perfect match to other 

Russell Pro System braided lines 

H49-0942 


FLHT, FLHR, FLTR 02-06 H49-0942 $59.99 

For FXST 00-06 49-30010 54.99 


TECHNICAL 



18-5133 

30-1754 30-1756 

30-1755

18-5495 

2” V-CLEANER VELOCITY STACKS 

FOR BIG TWIN 93-06 W/ CV CARB AND 

H-D MODELS 01-12 W/ DELPHI EFI 

(EXCEPT FLHT, FLHR, FLTR, FLHX AND FLHTCUTG/FLHXXX 09-12) 

Constructed of CNC-machined 6061 billet aluminum with a chrome or 

black anodized finish ❖ Chrome backing plate ❖ Includes breathers 

and mounting hardware ❖ Made in the U.S.A. 

$427.99 




Black 18-5496 


FOR BIG TWIN 93-06 W/ CV CARB AND H-D MODELS 01-12 W/ DELPHI EFI 

(EXCEPT FLHT, FLHR, FLTR, FLHX 08-12 AND FLHTCUTG/FLHXXX 09-12) 


Black 18-5498 

FOR BIG TWIN 93-06 W/ S&S E AND G CARBS 


2” FULL MOON VELOCITY STACKS 

Precision CNC-machined from 6061 billet aluminum ❖ Chrome or 

black-anodized finish with chrome backing plate ❖ Breathing system 

built into mounting posts ❖ Comes with 

mounting hardware ❖ Made in the U.S.A. $427.99 


FOR BIG TWIN 93-06 W/ CV CARB 

AND H-D MODELS 01-12 W/ DELPHI EFI 

(EXCEPT FLHT, FLHR, FLTR, FLHX 08-12 

AND FLHTCUTG/FLHXXX 09-12) 


Black 18-5504 

2” MOONEYE VELOCITY STACKS 

Precision CNC-machined from 6061 billet aluminum ❖ Chrome or black-anodized finish with chrome 

backing plate ❖ Breathing system is built into mounting posts 

❖ Come with mounting hardware ❖ Made in the U.S.A. 

$427.99 

18-5596 

NOSTALGIA 

VELOCITY STACKS 

CNC-machined billet 

aluminum construction 

❖ Comes complete with 

backing plate with breathers 

and screen ❖ Includes hardware 



FOR BIG TWIN 93-06 W/ CV CARB, BIG TWIN 01-12 W/ DELPHI EFI 

(EXCEPT FLHT/FLHR/FLHX/FLTR 08-12 AND FLHTCUTG/FLHXXX 09-12) 

Chrome 18-5597 $419.99 

Black anodized 18-5599 398.99 

FOR TWIN CAM MODELS 99-06 W/ S&S E/G CARB 

Chrome 18-5596 419.99 

Black anodized 

FOR XL 91-12 

18-5598 398.95 

Chrome 18-5244 419.99 

Black anodized 18-5243 398.99 

VELOCITY 

STACK 

PRE-FILTER 

Works with any RSD 

velocity stack or any 3 3 /4” velocity 

stack ❖ Water repellent design 

❖ Filters particles down to .005” 


$18.99 

PART NO. 30-7211 

18-5496 


FOR BIG TWIN 93-06 W/ S&S E AND G CARBS (CONT) 

Black 18-5500 

FOR BIG TWIN 93-06 W/ MIKUNI 42/45 CARBS 


Black 18-5502 

18-5598 

18-5504 


Black 18-6029 $180.99 


FOR 93-06 BIG TWIN W/S&S E AND G CARBS 


Black 18-5506 

FOR 93-06 BIG TWIN W/ MIKUNI 42/45 CARBS 


Black 18-5508 


Made of CNC-machined billet aluminum ❖ Simple installation – bolts 

to S&S Super E or G carb ❖ Includes bolts and gasket; backing 

plate/breathers not required ❖ Made in the U.S.A. 


Chrome 18-6030 $189.99 


FOR S&S AND KEIHIN CV CARBURETORS 

CNC-machined from 6061 T-6 billet aluminum and chrome plated 

❖ Include mounting 

hardware ❖ Available 

in two lengths to 

suit your needs 

18-6029 

18-6030 

18-5497 

18-5498 

18-2628 

NOTE: Velocity stacks do not include an air filter element 

or a carburetor support and must be used accordingly. 


FOR S&S SUPER E AND G CARBS 

2 1 /2” 18-2626 $59.99 

4” 18-2627 65.99 

FOR KEIHIN CV CARBS 

2 1 /2” 18-2628 59.99 

4” 18-2629 65.99 


TECHNICAL 



18-5507 18-5505 

515 

F 

U 

E 

L 

/ 

I 

N 

T 

A 

K 

E

F 

U 

E 

L 

/ 

I 

N 

T 

A 

K 

E 

FLANGE-MOUNT 

INTAKE MANIFOLDS 


For mounting an S&S E and G 

series carburetor or flange mount 

carburetor on a Twin Cam 99-06 

with stock or S&S cylinder heads 

❖ Will also fit an 80” Evolution 

84-99 that requires a map sensor 

port ❖ Come with a map sensor 

port and match OEM intake ports 

❖ Flanges sold separately, see 

below ❖ Made in the U.S.A. 

$78.99 


S&S E-series intake manifold 17-2503 

S&S G-series intake manifold 17-2765 

NOTE: Band style can be installed on earlier O-ring style heads with damaged 

O-ring flanges. 

INTAKE MANIFOLD FLANGES 

FOR BIG TWIN 84-06, SPORTSTER 86-06 

ENGINES WITH S&S INTAKE MANIFOLD 

Front/rear flange; repl. H-D NO. 27009-86B 

and 27010-86B ❖ Sold in pairs ❖ Made in 

the U.S.A. 

516 

$10.99 

17-2503 17-2896 


FOR SHOVELHEADS AND XL 

For stock, +.050” and +.200” longer cylinders 

❖ Choose from O-ring or band type, whichever one works 

with your bike ❖ Compatible with Bendix, Keihin or S&S 

Super E, B and G carbs 


O-RING TYPE FOR SHOVELHEADS 

66-E78 AND XL 57-78 

SUPER B AND E 

Std. H17-025 $70.99 

+.050” H16-057 70.99 

+.200” H16-058 69.99 

FLANGE-MOUNT 


FOR EVOLUTION-STYLE BIG TWIN 84-99 

Can be used to replace stock 

“compliance fitting” manifold on 84-89 

and stock rigid-mount manifold from 

90-99 ❖ Use with stock or S&S cylinder 

heads ❖ For use with stock 5.5550” 

length cylinders ❖ Requires the use 

of S&S intake seals and flanges (sold 

separately) ❖ Do not feature MAP sensor 

ports ❖ Made in the U.S.A. 

$78.99 


For S&S E, L, Super A, B, E, H-D Tillotson, 

Bendix, and Keihin carbs 17-2896 

For Super G carbs 17-2897 

ADJUSTABLE CARBURETOR 

SUPPORT BRACKET 

This support bracket adjusts from 5 1 /4” 

to 6 3 /8” ❖ Easily mounts from the 

center case bolt between cylinders to 

the lower flange mount of the manifold 


$15.99 


PART NO. 17-3337 


O-RING TYPE FOR SHOVELHEADS 

66-E78 AND XL 57-78 (CONT) 

SUPER G 

Std. 17-2766 $70.99 

+.050” 17-2767 70.99 

+.200” 17-2768 70.99 

INTAKE 

MANIFOLD 

U-RINGS 

For use with S&S CV 

manifolds ❖ Allows 

proper sealing of CV 

carb to the manifold 

26-3335 

❖ Available in two sizes 

❖ Sold each ❖ Made in the U.S.A. 

$14.99 


40-42mm 26-3336 

44-45mm 26-3335 

MANIFOLD 

CONVERSION 

KIT 

FOR 80” BIG TWIN 

84-99 MODELS 

If you’re looking to 

create a more rigidmount 

system for your 80” Evolution manifold, then this 

conversion kit is what you need ❖ This kit also eliminates 

the cracking and leaking problems associated with the stock 

rubber compliance fittings ❖ Includes an S&S Performance 

manifold, mounting flanges, two specially molded O-rings 

and two .350” spacers for spacing out the stock air cleaner 

or carb mount bracket ❖ Fits 80” Big Twin 84-99 models 

if flange-type carburetor or adapter is used 

NOTE: Not for use with an S&S G series carb. 


Manifold conversion kit H17-030 $94.99 

Repl. intake manifold seals (pr.) H17-016 2.99 


BAND TYPE FOR SHOVELHEADS L78-84 

AND XL 79-82 (W/O VOES) 

SUPER B AND E 

Std. H17-027 $70.99 

+.050” H16-059 70.99 

+.200 H16-060 70.99 

H17-030 

17-2766 H17-025 H17-027 


BAND TYPE FOR SHOVELHEADS L78-84 

AND XL 79-82 (W/O VOES) (CONT) 

SUPER G 

Std. 17-2769 $70.99 

+.050” 17-2770 70.99 

+.200 17-2771 70.99 

INTAKE MANIFOLD CLAMPS 

Clamps are 


Shovelhead 79-84 w/ rubber band-style cylinder heads; repl. OEM #27063-80 18-4716 $8.99 

Shovelhead 66-78 w/ O-ring-style cylinder heads; repl. OEM #27063-57 18-4715 10.99 

3 /4” wide and constructed 

of .020” thick stainless steel and use 

a curved 10-24 threaded “T”-bolt with 

plated steel aircraft hex locknut 

❖ Sold each 

INTAKE 

MANIFOLD 

O-RINGS 

FOR BIG TWIN 

84-06, SPORTSTER 

86-06 ENGINES 

WITH S&S MANIFOLD 

Used with all current 

S&S manifolds ❖ Sold in pairs 

$9.99 

PART NO. 17-2782 


TECHNICAL 


www.denniskirk.com

MANIFOLD SPACER KITS 

Spacer kits are required when using 116” JIMS Stroker kits with 

standard-width manifolds, such as standard CV carb, H-D Delphi EFI, 

Screamin’ Eagle ® and S&S ® because 116” Stroker kits have .100” 

taller cylinders that increase the distance between heads by .080” 



Twin Cam 06-09 20-9357 $106.99 

RUBBER FLANGE 

ADAPTERS 

FOR SPIGOT-TYPE 

CARBURETORS 

Designed for 30-40mm spigot-type carburetors 

❖ Adapters include clamps ❖ Sold each 


36mm-38mm rubber flange adapter 18-850 $16.99 

40mm rubber flange adapter – 43mm carb spigot o.d. (fits RS40, RS42) 18-851 16.99 

40mm rubber flange adapter – 52mm carb spigot o.d. 18-69 19.99 

BILLET FLANGE ADAPTER 

FOR SPIGOT-TYPE CARBS 

Allows you to mount OEM late-model CV 

or Mikuni HSR-42 carbs on Sportster, 

Panheads, Shovelheads or early Evolution 

with two-bolt flange manifolds ❖ CNCmachined 

from 6061 billet aluminum 

❖ Mounting holes are 2.75” on center 

❖ Can be polished, plated or painted 

❖ Made in the U.S.A.; sold each 


Flange adapter, billet H18-585 $28.95 

Seal for carb to manifold H14-330 7.99 

INTAKE MANIFOLD CLAMPS 

Polished stainless steel intake clamps for 

Big Twin and XL 55-E78 ❖ Include O-rings 

❖ Sold in pairs ❖ Made in the U.S.A. 

$15.99 



Big Twin 90-05 20-9356 $46.99 

H18-585 

20-9356 

FLANGE ADAPTERS 

Black rubber flange adapters for HSR 42mm and 45mm 

spigot carburetors ❖ Clamp included; 

sold each 


42mm H18-586 

$25.99 

CHROME INTAKE MANIFOLD FLANGES 

FOR BIG TWIN 90-05 AND XL 86-06 

Replace the stock flanges ❖ Sold in pairs 


Intake manifold flange set H17-015 $25.95 

Repl. intake manifold seals (pr.) H17-016 2.99 

INTAKE 

MANIFOLD 

CLAMPS 

FOR H-D L78-84 

Spring steel, chrome-plated clamp assemblies for all Harley L78-84 models (except Evolution) 

❖ Clamps are strong and easy to install ❖ Include 

seals and replace OEM NOS. 27063-80 and 

27062-78 ❖ Sold in pairs ❖ Made in the U.S.A $21.99 PART NO. H25-001 

CARB AND INTAKE 

MANIFOLD SEAL KITS 

Carb/manifold seal kit contains one carb-tointake 

seal and two intake-to-cylinder-head seals 


40mm seal kit for 99-06 Twin Cam, 

90-99 80” Evolution and 88-06 XL 

w/ OEM carbs H17-017 $11.99 

44mm seal kit for 99-06 Twin Cam, 

90-99 80” Evolution and 88-06 XL 

w/ Screamin’ Eagle carbs H26-101 11.99 

INTAKE FLANGES 

Durable CNC-machined 6061 billet aluminum flanges that will not 

warp or crack like some forged 

flanges ❖ Made in the U.S.A. 


Big Twin 06-12 20-9645 

H17-015 

$50.99 


Big Twin 01-05 20-9646 

H18-586 


45mm H18-588 


S&S carb/manifold seal kit; 

repl. OEM #27002-66-SS 14-9794 $13.99 

1671 Edelbrock manifold seal kit; 

repl. OEM #27002-E1671 14-9791 7.99 


TECHNICAL 



517 

F 

U 

E 

L 

/ 

I 

N 

T 

A 

K 

E

F 

U 

E 

L 

/ 

I 

N 

T 

A 

K 

E 

POWER X-WING 

Patented air vane requires no modifications to install and produces 

acceleration gains from idle to wide-open throttle ❖ Dyno tests have 

shown 2-5 horsepower gains and 4-6 ft.-lbs. max torque increases on 

OEM H-D engines ❖ Independent tests were conducted on 88”, 96” 

and 110” engines ❖ Complements popular air filter system upgrades 

$122.99 


FLHT/FLHX/FLHR/FLTR 08-12 17-3223 

Softail/Dyna 06-12, FLHT/FLHX/FLHR/FLTR 06-07 w/ Delphi EFI 17-3201 

Softail 01-05 Dyna 04-05, FLHT/FLHR/FLTR 02-05, XL 07-12 w/ Delphi EFI 17-3200 

V-Rod 02-11 (all) 17-34501 Buell XB12/R/S 03-09 17-3449 

Models w/ OEM CV carb 88-06 17-3199 

Mikuni HSR 42/45 carbs w/ early style 1.75” H-D adapter 17-3224 

Mikuni HSR 42/45 carbs w/ late style 2” H-D adapter 17-3225 

Mikuni HSR 48 carb w/ 2” adapter 17-3226 

S&S Super E Shorty 

1 PRICE is $170.99. 

17-3250 

THE SYSTEM II 

FUEL 

ATOMIZER 

System II atomizer 

is a proven problem 

solver for inefficient 

H16-003 H16-004 

fuel systems ❖ Works 

as a turbulator to 

H16-008 

properly mix fuel entering the intake manifold for better performance 

and fuel efficiency ❖ All atomizers have been updated to a special 

manufacturing process that allows the use of special brass 

materials; the result is a lighter weight product with better sealing 

characteristics and better resistance to high octane fuel and additives 

❖ Available to fit 38mm Bendix and Keihin, 40mm S&S, Mikuni and 

Screaming Eagle and CV carbs 


$17.99 


38mm Bendix and Keihin H16-003 

40mm S&S, Mikuni and Screaming Eagle H16-004 

Keihin CV carbs H16-008 

MIKUNI CHOKE CABLE RELOCATION 

BRACKET KITS AND KNOBS 

Kits include bracket, idle mixture screw knob and choke cable knob 

❖ CNC-machined billet aluminum components ❖ Available in chrome 

and raw finish ❖ Made in the U.S.A. 

NOTE: Must be used with Mikuni choke cable, PART NO. 17-3264. 


Bracket kit w/ choke and idle knobs, chrome 17-3202 $128.99 

Bracket kit w/ choke and idle knobs, raw 17-3203 95.99 

Knurled choke and idle knobs only, chrome 17-3204 78.99 

Knurled choke and idle knobs only, raw 17-3205 58.99 

Mikuni choke cable 17-3264 21.99 

518 

17-3203 

17-3199 

17-3264 

17-3204 

17-2796 

$113.99 

POWER NOW 

Increases power and horsepower at 1 /4 and 1 /2 throttle ❖ Mounts into 

the backside/airboot side of the carburetor ❖ The Power Now “Power 

Plate” cuts the single air venturi into two smaller, faster air venturi 

❖ The increased horsepower and power are created by the precisely 

positioned hole in the Power Plate which increases the speed of the 

top and bottom venturis 

$113.99 


40mm Keihin CV Carb for 80-88” Big Twin 98-06 17-2796 

Delphi EFI 06-12 17-2797 

Mikuni HSR42 carb 17-2798 



For Delphi EFI 01-05 17-2946 

TURBULATOR 

Fixed-vane vortex 

design turns your 

intake manifold into 

a more efficient mixing 

chamber ❖ Design helps 

eliminate heavy droplets of fuel, 

fuel stacking and fuel puddling, 

resulting in the elimination of load and dive 

spots, and increased performance ❖ More 

complete atomization also increases fuel 

mileage and eliminates standoff 

$14.99 


Bendix/Zenith carbs 16-235 

S&S B and E series 16-236 

Keihin CV carbs 16-238 

S&S Super G 16-239 

17-3318 

CHOKE CABLE RELOCATION BRACKETS 

Relocates choke cable and knob out of the way ❖ For use with stock 

choke cables and knobs ❖ Made from stainless steel with ballburnished 

finish ❖ Made in the U.S.A. 

$29.99 


For all Mikuni HSR carbs 17-3318 

17-3319 


For all Keihin CV carbs 17-3319 


TECHNICAL 


www.denniskirk.com

ENRICHENERS WITH KNOBS 

FOR S&S SUPER E AND G CARBS 

Replace your existing enrichener 

❖ Attractive chrome choke knobs 

in several styles 


Spike 17-2643 


Gothic back cut cross 17-3292 

Back cut knob 17-3293 

CHROME BILLET 

CHOKE KNOB COVERS 

Chrome covers hide all plastic choke knobs 

❖ Positive, screw-together fit ❖ Your choice 

of smooth or 

ball-milled style 

$18.99 


Flat 17-2644 

$47.99 

17-3292 17-3293 

17-3473 

ENRICHENER KNOBS 

FOR S&S CARBS 

Replaces enrichener lever on S&S carbs and is 

perfect for custom applications ❖ Made in the U.S.A. 

17-2672 17-3101 

17-3102 

CHROME BILLET 

CHOKE KNOBS 

Choke knobs made the 

way choke knobs were 

meant to be made 

❖ For all 88-06 

models with Keihin CV 

carburetor or Mikuni 

HSR42/45 carburetors ❖ Attach with a 

setscrew ❖ Made in the U.S.A. 


Ball-milled 17-2672 $28.99 

8 Ball, chrome 17-3101 30.99 

8 Ball, black 17-3102 30.99 

Flame H49-340 28.99 

H50-387 

17-2643 


Power Flow 17-2645 

$33.99 


Polished nautical star 17-3473 

Brass nautical star 17-34741 1 PRICE $49.99. 


Hot Head H49-341 $28.99 

Joker H49-342 28.99 

Smooth H49-343 28.99 

H50-388 


Smooth H50-387 

Ball-milled H50-388 

17-2644 

ENRICHENER LEVER COVERS 

FOR S&S CARBS 

Die-cast chrome-plated cover for S&S E or G 

carb enrichener levers ❖ Comes with wrench 

and two setscrews ❖ Matches other Drag- 

Hotop products 

$9.95 

17-2645 

17-3474 

H49-340 H49-341 

H49-342 H49-343 

ALI BABA 

CHOKE KNOB 

Get rid of that ugly plastic 

choke knob and replace it 

with this beauty ❖ Aluminum construction with a 

brilliant chrome finish ❖ Includes setscrew, can 

also be screwed on to 5 /16” threaded cables 

$42.99 

BOTTLE CAP 

CHOKE CABLE KNOB 

Give your choke knob a personal touch with 

your favorite beverage cap ❖ Installs in 

minutes, and can be changed as often as you 

like ❖ Bottle cap not 

included ❖ Made in 

the U.S.A. $27.99 

PART NO. 17-3471 

MARQUIS CHOKE KNOB COVER 

Installs neatly over the stock black plastic unit ❖ Looks 

100% better, is easier to find and easier to grab ❖ Fits stock 

carburetors on XL 88-06 and Big Twin 90-06 models ❖ Easily 

attaches with setscrew 

$28.99 

HOTOP S&S CHOKE KNOB ASSEMBLY 

Easily replace the stock S&S enrichener lever on E and G carbs 

when you change to a different style air cleaner assembly 

❖ Retains the stock plunger/spring and allows for progressive 

enrichment ❖ This kit includes a chrome knob and a brass 

plunger nut ❖ Made in the U.S.A. 

$38.95 


PART NO. 17-2528 

S&S ENRICHENER LEVER COVER 

A stylish addition, this unique chrome cover 

fits over the enrichener lever on S&S E and 

G carbs ❖ Hex key and an extra stainless 

steel setscrew included 

$10.95 



PART NO. H39-3304 


TECHNICAL 



519 

F 

U 

E 

L 

/ 

I 

N 

T 

A 

K 

E

F 

U 

E 

L 

/ 

I 

N 

T 

A 

K 

E 

CARB KITS 

S&S SUPER E & G SERIES SHORTY CARBURETOR KITS 

Designed exclusively for Harley-Davidson Big Twin and Sportster engines ❖ Butterfly-type carbs with a fully adjustable idle 

mixture screw and a changeable mid-range and high speed jet ❖ Fully adjustable accelerator pump and a variable enrichment/ 

fast idle device for improved throttle response, engine starting and warm-ups ❖ Super E has a 17 /8” throat at the butterfly 

and a 19 /16” venturi and is recommended for use on any displacement Big Twin or Sportster ❖ Super G has a 21 /16” throat 

at the butterfly and a 13 /4” venturi and is recommended for use on 74-cubic-inch engines and larger where high-performance modifications 

have been done or are planned (not recommended for smaller, lower-compression engines) ❖ If you are not sure which carburetor to use, we 

suggest the 17 H16-103 

/8” Super E ❖ Each complete carb kit includes: one S&S Super E or Super G gas carburetor, one S&S teardrop air cleaner 

assembly, one manifold, mounting hardware, fuel line, clamps, overflow line, one extra intermediate jet, two main jets, VOES tubing (when 

applicable), and installation and jetting instructions ❖ Carburetors only also available ❖ Made in the U.S.A. 

NOTE: S&S Super E & G carburetors require the use of a two-cable, pull open-pull closed throttle assembly. If your bike is not equipped with one, 

a two-cable system must be purchased separately, see Handlebar/Controls Section. 


BIG TWIN MODELS 

Twin Cam 99-06 H16-106 $516.99 

Evolution Big Twin 84-91 H17-0532 492.99 

Evolution Big Twin 84-91 (no manifold) H16-120 492.99 

For 66-84 Big Twin 

(no manifold; air cleaner 

notched for clearance) H16-056 481.99 


Evolution Big Twin 92-99 (no manifold) H16-119 501.99 

Shovelhead 79-84 (band-style intake) H17-0533 493.99 

Shovelhead 66-78 (O-ring-style intake) H17-0535 481.99 

Panhead 55-65 (O-ring-style intake) H17-0536 506.99 

520 

16-5017 

H16-106 

16-5100 

1 7 /8” SUPER E CARB KITS 2 1 /16” SUPER G CARB KITS 

MODEL & YEAR 

XL MODELS 


XL 04-06 16-5017 $572.99 

XL 91-03 H17-0537 521.99 

XL 86-90 

XL 79-85 

H17-0538 513.99 

(band-style intake and VOES unit) H17-0539 496.99 

XL 57-78 (O-ring-style intake) H17-05411 SUPER E CARB ONLY 

473.99 

Super E carb 

1 Except with magneto. 

16-5100 309.99 

H17-113 

H16-113 

H17-0536 

H16-056 

MODEL & YEAR 

BIG TWIN MODELS 


Twin Cam 99-06 H16-107 $536.99 



Shovelhead 79-84 (band-style intake) H17-0563 506.99 

Shovelhead 66-78 (O-ring-style intake) H17-05651 SUPER G CARB ONLY 

496.99 

Super G carb 

1 Except with magneto. 

16-5101 324.99 

BENDIX CARBURETORS 

High-performance Bendix carburetors are easy 

bolt-on replacements that need no extra fitting or 

linkage connections ❖ Most offer adjustable highspeed 

jets; all provide improved acceleration and easier, quicker starts 


NOTE: All Bendix carbs may be used for other applications, provided correct cables are used. 

DESCRIPTION MODEL & YEAR PART NO. PRICE 

38mm high-performance carb Shovelhead 69-75; XL 57-75 

w/ adjustable main jet; standard finish (except models w/ magnetos) H16-002 $379.99 

38mm standard repl. Bendix carb Shovelhead 69-75, XL 57-75 

w/ fixed main jet; standard finish (except models w/ magnetos) H16-112 334.99 

40mm high-performance carb All dual-throttle cable linkage H-D L81-89 

w/ adjustable main jet; standard finish (will not fit models w/ CV carbs unless 

choke hookup is fabricated, intake manifold 

Choke cable accessory kit (required 

when installing 40mm carb on 

purchased and throttle cables modified) H16-113 425.99 

Big Twin 84-89 or XL Evolution 86-87) - H17-113 66.99 


TECHNICAL 


www.denniskirk.com

HSR42/45 CARBURETORS 

These HSR carbs are designed for a custom application 

❖ Choose either standard or highly polished finish 

❖ Use OEM CV-style cables 

NOTE: Choke cable is included, except PART NO. H16-221, which uses stock 

choke cable from CV-type carb. 

NOTE: Airbox adapter PART NO. H17-005 must be ordered separately. 


42mm carburetor, standard H16-221 $341.99 

42mm carburetor, polished H16-220 464.99 

45mm carburetor, standard H16-223 397.95 

45mm carburetor, polished H16-222 521.99 

HSR42/45 SMOOTHBORE 

CARBURETOR KITS 

42MM/45MM EASY KITS 

Easy Kits accept the original H-D intake 

manifold, choke cable, air cleaner and throttle 

cables ❖ Retain a stock look ❖ Can be used 

with high-flow air filters ❖ Not for use with 

cruise control 

MODEL & YEAR 

HSR42 

Twin Cam 99-06, Evolution Big Twin 90-00 (uses stock air cleaner cover; may be used 


w/ a Screamin’ Eagle air filter kit; will not work w/ cruise control or stock air box) H16-991 $369.99 

Evolution Big Twin 90-00 (includes chrome air cleaner cover; will not work w/ cruise control) 

XL 1200 94-06 models (includes special backing plate and hardware; uses stock 

H16-94 426.99 

oval air cleaner cover and high-flow filter) H16-97 426.99 

XL 1200 94-06 using Screamin’ Eagle air filter (includes air filter adapter) 

HSR45 

For 99-06 Twin Cam 88 and 90-99 Evolution Big Twin (use stock air cleaner cover; 

H16-100 398.99 

may be used with a Screamin’ Eagle air filter kit; will not work with cruise control) 16-51152 398.99 

1 Not for use with stock backing plate. 2 Requires use of Screamin’ Eagle manifold (N/A from Dennis Kirk). 

38MM MIKUNI 

CARB KIT 

Kit includes a 5” chrome front 

K&N air cleaner, Mikuni VM38 

carburetor, manifold adapter, 

hose clamps, throttle cable and 

two main jets 

H17-007 

H16-220 

NOTE: Manifold is not included. Fits FX, FL and XL models to 81, or H-D models L81-89 with single-cable throttle control. 


38mm Mikuni carb kit for Evo models 84-89 w/ single-cable throttle control H17-007 $243.99 

Repl. throttle cable 19-07137 19.99 

H16-95 

HSR42/45 TOTAL KITS 

Everything you need for a complete installation 

(except cables) ❖ Each kit includes a performance intake 

manifold, rubber flange, 42mm or 45mm natural-finish 

carb, high-flow K&N filter, air cleaner cover, breather kit 

and hardware 

H16-221 

MODEL & YEAR 

42MM CARB KITS 

For Evolution Big Twin 84-99 


(except 84-88 Touring models) H16-951 $549.99 

For Twin Cam 88/95 99-06 

45MM CARB KITS 

16-494 578.99 

For Evolution Big Twin 84-99 16-4951 625.99 

For Twin Cam 95 99-06 

1 84-89 models require the use of Big Twin 

90-95 CV-style carb cables. 

16-496 625.99 


TECHNICAL 



H16-99 

CRUISE CONTROL BRACKET 

FOR MIKUNI HSR42/45/48 CARBS 

Fits all years with Mikuni HSR42/45/48 

using stock cables ❖ Retains cruise control 

when adding a Mikuni/Screamin’ Eagle carb 


$140.99 

PART NO. 18-4185 

521 

F 

U 

E 

L 

/ 

I 

N 

T 

A 

K 

E

F 

U 

E 

L 

/ 

I 

N 

T 

A 

K 

E 

JETS AND JET KITS FOR S&S CARBS 

LOW-RANGE JET KITS 

For jetting most stock- and moderate-performance engines up to 

about 93” ❖ Each jet pack includes one each intermediate jets 

(.025, .0265, .028 and .0295) and one each main jets (.062, 

.064, .066, .068, .070, .072 and .074) ❖ Replacement jets 

also available separately 

HIGH-RANGE JET KITS 

For jetting some stock- and all moderate-performance engines ❖ Each jet pack 

includes one each intermediate jets (.0295, .031, .032 and .033) and one each 

main jets (.072, .074, .076, .078, .080, .082 and .084) ❖ Replacement jets 

also available separately ❖ Made in the U.S.A. 

LOW RANGE 


Low-range jet kit H17-0300 $42.99 

INTERMEDIATE JETS 

.025 intermediate jet (ea.) H17-0400 7.99 



MAIN JETS 

.062 main jet (ea.) H17-0553 7.99 

CV JET KITS 

Complete kits with everything needed 

to make CV carbs run perfectly 

❖ PART NO. 17-3333 contains the following: needle 

(NOKH); slow jets (165, 170, 175, 180); main jets (45, 

48) ❖ PART NO. 17-3334 contains the following: needle 

(NOKH); slow jets (180, 185, 190); main jets (45, 48) 

❖ PART NO. 17-3335 contains the following: holders 

(08 B00); needles (NOKG, 5 MAHR); slow jets (170, 

175, 180, 185, 190, 195, 200, 205); main jets 

(45, 48, 50) ❖ PART NO. 17-3336 contains the 

following: holder (08 B00); needles (5 MAHR); 

slow jets (190, 195, 200, 205); main jets 

(45, 48, 50) ❖ All kits include instruction sheet 

A-BAX SLOW 

JETS (PILOT) FOR 

KEIHIN N424-25 

Fit FCR horizontal and downdraft 

series FCR28, 32, 33, 35, 37, 39, 41mm carburetors ❖ Available in 

sizes 35, 38, 40, 42, 45, 48, 50, 52, 55, 58, 60, 62 and 65; add 

size to PART NO. ordered (for example, order PART NO. 17-3402-55 

for a size 55 jet) ❖ Sold each 

522 

$3.99 (ea.) 


MAIN JETS (CONT) 

.064 main jet (ea.) H17-0554 $7.99 

.066 main jet (ea.) H17-0555 7.99 

.068 main jet (ea.) H17-0556 7.99 

.070 main jet (ea.) H17-0557 7.99 

.072 main jet (ea.) H17-0408 7.99 

.074 main jet (ea.) H17-0409 7.99 

17-3333 

RD PRECISION MAIN JETS 

High-precision brass carburetor jets ❖ Flow calibrated for extremely 

accurate fuel flow rate ❖ Available in a range of sizes for Keihin or 

Mikuni slot head and hex head applications ❖ Not original Keihin or 

Mikuni jets; simply a high-quality replacement ❖ All are sold each 

KEIHIN-STYLE SLOT HEAD (KJ PREFIX) 

Available in sizes 72.5 through 160 in 2.5 increments, and sizes 

170 and 190; add size to PART NO. ordered (for example, order 

PART NO. 17-2401-725 for 72.5 jet size) 

KEIHIN-STYLE HEX HEAD (CR PREFIX) 

Available in the following main jet sizes: 80, 82, 85, 88, 90, 92, 95, 

98, 100, 102, 105, 108, 110, 112, 115, 118, 120, 122, 125, 

128, 130, 132, 135, 138, 140, 142, 145, 148, 150, 152, 155, 

158, 160, 162, 165, 168, 170, 172, 175, 178, 180, 182, 185, 

188, 190, 192, 195, 198, 200, 202, 205, 208, 210, 212, 215, 

218, 220, 222, 225, 228, 230, 232 and 235; add size to 

PART NO. ordered (for example, order Part No. 17-2402-80 for 

80 jet size) 

MIKUNI-STYLE SLOT HEAD (SJ PREFIX) 

Available in sizes 72.5 through 157.5 in 2.5 increments and sizes 

160 and 170, add size to PART NO. ordered (example, order 

PART NO. 17-2399-1075 for 107.5 jet size) 

MIKUNI-STYLE HEX HEAD (HJ PREFIX) 

Available in sizes 70, 80 and 90; available in sizes 100 through 200 

in 5 increments; and in sizes 200 through 680 in 10 increments; 

add size to PART NO. ordered (for example order PART NO. 

17-2400-280 for 280 size jet) 

5.5 mm 

15 mm 


High-range jet kit H17-0301 $42.99 

INTERMEDIATE JETS 





17-3335 


XL 88-03 17-3333 $56.99 

XL 04-06 17-3334 51.99 

H17-0300 H17-0301 

MIKUNI-STYLE SLOT HEAD 

(SJ PREFIX) 

$2.75 (ea.) 

PART NO. 17-2399- 

MIKUNI-STYLE HEX HEAD 

(HJ PREFIX) 

$2.75 (ea.) 

PART NO. 17-2400- 

A-BAX PILOT 

JETS FOR 

MIKUNI VM28/486 

Fit all RS, HS and HSR 

carburetors ❖ Available in sizes 10, 12.5, 15, 17.5, 20, 22.5, 25, 

27.5, 30, 32.5, 35, 37.5, 40, 42.5, 45, 47.5, 50, 52.5, 55, 57.5, 

60, 62.5, 65, 67.5 and 70; add size to PART NO. ordered 

(for example, order PART NO. 17-3397-675 for a size 67.5 jet) 

❖ Sold each 

$3.99 (ea.) 

HIGH RANGE 


MAIN JETS 

.076 main jet (ea.) H17-0410 $7.99 

.078 main jet (ea.) H17-0411 7.99 

.080 main jet (ea.) H17-0412 7.99 

.082 main jet (ea.) H17-0413 7.99 

.084 main jet (ea.) H17-0414 7.99 

17-3336 


EVO/Twin Cam 95-06 17-3335 $84.99 

Twin Cam 99-06 17-3336 63.99 

KEIHIN SLOT HEAD (KJ PREFIX) 

$2.75 (ea.) 

PART NO. 17-2401- 

KEIHIN HEX HEAD (CR PREFIX) 

$2.75 (ea.) 

PART NO. 17-2402- 

PART NO. 17-3402- PART NO. 17-3397- 


TECHNICAL 



11.5 mm 

9mm 

5 mm 6.5 mm 

5mm 4mm 

8mm 

M5 x 0.75 

6mm x 6.9mm 

M5.3 x 0.9 

5 mm 

9mm 

16.5 mm 

6mm 

M5 x 0.80 

6mm 

M5.3 x 0.9 

28 mm

PILOT JETS 

FOR KEIHIN 

CARBS 

FOR H-D 76-06 

For both butterfly and CV styles of 

Keihin carbs ❖ Sold each 

$3.99 


CV-STYLE CARB; BIG TWIN 90-06 AND XL 88-06 

#40 pilot jet H17-600 









#55 pilot jet 17-3482 

MAIN JETS FOR HSR CARBS 

These large, round-head jets are for use in 

HSR carbs ❖ Available in increments 

of 2.5 from 150 through 195; 

size 200 also available 

❖ Genuine Mikuni; 

sold in pairs 

NOTE: Add jet size to PART NO. ordered. For 

example, to receive the 162.5 jet, order 

PART NO. 17-25-1625. 

MAIN JETS 

FOR CV-TYPE 

KEIHIN CARBS 

FOR BIG TWIN 90-06 

AND XL 88-06 

Main jets sold each 


#140 main jet H17-217 

#145 main jet H17-218 

#150 main jet H17-219 

#155 main jet H17-223 

#160 main jet H17-235 

#165 main jet H17-236 

#170 main jet H17-237 

#175 main jet H17-207 

#180 main jet H17-209 

#185 main jet H17-238 

PILOT JETS FOR HSR CARBS 

Replacement pilot jets; genuine Mikuni 

❖ Available in sizes 15 through 30 in 

increments of 2.5 and from 35 through 

60 in increments of 5 ❖ Sold in pairs 

NOTE: Add jet size to PART NO. ordered. 

For example, to receive the 27.5 jet, order 

PART NO. 17-27-275. 


#190 main jet H17-239 

#195 main jet H17-208 

#200 main jet H17-240 

#205 main jet H17-215 

#210 main jet 17-3477 

#220 main jet 17-3478 

#230 main jet 17-3479 

#240 main jet 17-3480 

#250 main jet 17-3481 

$5.99 

$5.99 PART NO. 17-25- 

PART NO. 17-27- 

CV MAIN JET KIT 

Kit includes main jet sizes 195, 200, 205, 210, 215 and 220 

❖ For use on Big Twin 90-06 and XL 88-06 models with CV 

carburetors ❖ Made in the U.S.A. 

17-2962 

$19.99 

17-2963 

HI-FLOW FUEL NIPPLES 

Flow more fuel over stock OEM nipples ❖ Available in single- and 

dual-carb setups with brass or stainless steel construction 

❖ Also works with nitrous oxide or wherever you need an 

extra fuel line ❖ Eliminates the need for a dual-outlet fuel petcock 

❖ Removal tool included 

DESCRIPTION 

FOR ALL KEIHIN CARBURETORS 76-06 (BUTTERFLY AND CV) 


Single outlet (brass) 17-2962 $40.99 

Single outlet (stainless steel) 17-3256 45.99 

Dual outlet (brass) 

FOR ALL MIKUNI HSR CARBURETORS 

17-2963 40.99 

Single outlet (stainless steel) 17-3257 45.99 

IDLE AIR 

ADJUSTING SCREWS 

Easy adjustment with knurled 

and slotted head ❖ For all CV 

carburetors ❖ Includes stainless 

steel or brass screw, O-ring, 

washer and spring 

$28.99 


Brass 17-3100 

DESCRIPTION 

BUTTERFLY-STYLE CARB; 

BIG TWIN 76-89 AND XL 76-87 

PART NO. 

#50 pilot jet H17-2101 #52 pilot jet H17-6021 #54 pilot jet H17-6031 #56 pilot jet H17-6041 #58 pilot jet 17-21501 1 PRICE $4.99. 


17-3256 

17-3100 

17-3257 

17-3255 


Stainless steel 17-3255 

17-2764 

H16-053 

H16-007 

PERFORMANCE 

POWER TUBES 

Fuel-atomizing devices 

provide a noticeable 

increase in power and 

a smoother running 

engine ❖ 10-minute 

installation ❖ Available 

for S&S-, B-, E- and 

H16-108 H28-230 

G-series carbs, HSR 42 and 45 and stock CV carbs 88-06 


Performance master kit for stock 40mm CV carbs 88-06 H16-053 $100.99 

Performance master kit for Screamin’ Eagle 44mm CV carbs 99-06 H16-054 100.99 

Power Tube for stock CV carbs (race kit) 89-95 H16-007 81.99 

Power Tube for S&S-, B-, E- and G-series carbs H16-108 45.99 

Power Tube for HSR 42 and 45 H28-230 57.99 

Power Tube for HSR 42 and 45 (w/o jets) 17-2764 54.99 

FLOAT BOWL 

SPEED SCREW KITS 

Great custom look with 

electropolished stainless steel 

❖ Will not corrode in extreme 

climates ❖ Stronger and 

longer than stock screws; will not round off 

❖ 


For CV/HSR carbs 17-3073 

For S&S B&D carbs 17-3074 

For S&S E&G carbs 17-3075 

5 17-3073 

/16” hex head design eases bowl 

removal and jet changing 

$32.99 

$3.99 


TECHNICAL 



523 

F 

U 

E 

L 

/ 

I 

N 

T 

A 

K 

E

F 

U 

E 

L 

/ 

I 

N 

T 

A 

K 

E 

NOTE: Legal in California only for racing vehicles which may never be used upon a highway. NOTE: Some machining of carb body is required. 

COLOR PART NO. PRICE 

THUNDERJET KITS FOR KEIHIN CV CARBS 

Polished 17-2676 $82.95 

Natural 17-2763 65.95 

Red H17-009 65.95 

Blue H17-010 65.95 

524 

17-2676 17-2763 H17-009 H17-010 H17-011 

ADJUSTABLE MAIN JET FOR BENDIX OR ZENITH CARBS 

Installs easily by drilling and tapping a 9 /32”-32 thread in the carb’s body ❖ Completely 

adjustable main jet eliminates time-consuming jet changes when fine-tuning, changing fuels or 

climates ❖ Spiral tap is necessary to install adjustable main jet on Bendix or Zenith carbs 


THUNDERJET KITS 

Get extra juice where you need it most ❖ Built-in air correction system provided by ThunderJet’s patented third 

fuel circuit permanently solves the problem of poor mid-range performance and/or too-lean condition at top end 

❖ Operate over a wide range of altitude and atmospheric conditions ❖ Made in the U.S.A. 

H17-177 

H17-1200 

CARBURETOR JET KITS 

Recalibrates OEM stock carburetors to gain optimal 

performance increases from Vance & Hines exhaust 

systems ❖ Includes complete needle assemblies 

with five ranges of adjustment, main jets, clips, 

washer and appropriate drill bits ❖ Includes 

detailed instructions for easy installation 

$88.99 


Twin Cam 00-06 H17-109 

Buell Blast 00-09 H17-202 

$55.99 


THUNDERJET KITS FOR KEIHIN CV CARBS (CONT) 

Black H17-011 $65.95 

THUNDERJET KITS FOR S&S E AND B CARBS 

Polished 17-2673 82.95 

Natural 17-2674 65.95 


Evo 1340 90-00 H17-173 

Evo 1340 84-00 (all w/ 44mm Keihin carb) H17-171 

PART NO. H17-0550 


THUNDERJET KITS FOR S&S E AND B CARBS (CONT) 

Blue H16-006 $65.95 

Black H17-032 65.95 

Red H17-033 65.95 

DYNOJET STAGE 7 THUNDERSLIDE WITH JET KIT 

Unique set of lift holes moderate how the slide moves with respect to throttle position; the 

faster the slide opens, the quicker the throttle response ❖ Revolutionary composite plastic 

slide provides unparalleled performance gains in both horsepower and mileage ❖ Kit includes 

jets, needles, clips, carburetor top and other necessary parts for CV carbs ❖ For 80+ 

horsepower engines and includes a taller carburetor top for more slide movement ❖ Made in 

the U.S.A. 

$156.99 


Twin Cam 00-06 H17-170 

Twin Cam 99 H17-058 

Evolution Big Twin 89-99 H17-1200 

17-2674 

H16-006 

H17-032 

17-2673 H17-033 

S&S 

E and B carbs 


Twin Cam 00-06 H17-177 

Twin Cam 99-06 (all w/ 44mm Keihin carb) H17-172 

DYNOJET THUNDERSLIDE 

WITH JET KIT 

Get unparalleled performance horsepower gains with this revolutionary kit ❖ Kit features a 

unique set of lift holes that moderate how the slide moves in relation to the throttle ❖ Gives 

big power gains and increases mileage ❖ Kit includes jets, needles, clips and any additional 

parts required to make full use of the performance potential of your bike’s CV carb ❖ Designed 

to work well with OEM or aftermarket airbox and exhaust system ❖ Made in the U.S.A. 

$142.99 


XL 1200C/R 04-06 17-2392 

XL 1200 (all except Sport) 89-03 H17-1201 

XL 1200 Sport 98-03 H17-054 

NO-HASSLE JET KITS 

FOR CV CARBURETORS 

Genuine Keihin parts ❖ Include two 

slow jets, two main jets and 

a new jet needle ❖ Easily return 

to stock configuration if required 

❖ Detailed instructions for jetting your motor 

from stock to highly modified ❖ Six different 

kits available for all applications ❖ Slow jet 

screwdriver sold separately 


Evolution Big Twin 90-99 H17-036 $37.99 

Twin Cam 99-06 H17-224 53.99 

XL 1200 88-03 (except 1200S 97-03) H17-037 37.99 

XL 1200S 97-03, Buell S1, S2/S2T, S3/S3T and M2 94-98 H17-039 37.99 

XL 883 88-03 H17-038 37.99 

XL 883/1200 04-06 H17-0073 36.99 

Keihin slow jet screwdriver H28-107 14.99 


TECHNICAL 


www.denniskirk.com

QUICKSHOT 

FOR S&S SUPER E & G CARBURETORS 

Adjusts accelerator pump fuel spray with a simple turn of a screw 

❖ Stops bogging and coughing with accelerator pump check valve 

❖ Injects fuel more efficiently than stock ❖ Fuel atomizes quicker for 

better roll-on acceleration and instant throttle response ❖ Better fuel 

economy and low end performance ❖ Simple bolt-on installation with 

no modifications needed 

$94.99 

PART NO. 17-3472 

RECALIBRATION KIT 

FOR 40MM KEIHIN CV CARB 

An inexpensive, super highquality 

recalibration kit for the 

CV carburetors used on H-D 

Evolution 88-99 ❖ Kit has 

all the components for dialing in a CV carb with or without an 

accelerator pump 

$45.99 

CV VACUUM PISTON 

FOR 40MM CARBURETOR 88-06 

Exact replacement for OEM 

NO. 27585-88 

$39.99 


PART NO. H17-0527 

KEIHIN CARB 

ACCELERATOR PUMP KIT 

Another inexpensive and easy way to turn your Harley 

into a performance monster ❖ This high-flow accelerator 

pump will improve your low-end and mid-range response 

significantly by increasing fuel flow through the pump 

❖ No need to remove the carb – just remove your float 

bowl, drill one hole and install the kit ❖ Designed for any 

Harley 80-89 model with stock Keihin carburetor 

$23.99 


49-2953 

CV CARBURETOR TOP COVERS 

Chrome cover replaces the stock plastic 

carburetor top cover ❖ Created with 6061 

T-6 billet aluminum that is polished to a high 

luster and is chrome plated 


FOR CV40/44 CARBURETORS ON BIG TWIN, XL AND BUELL 88-06 

Top cover w/ logo 49-2953 $51.99 

Top cover w/ logo and choke cable bracket 49-2954 56.99 

H17-0526 H17-200 

RECALIBRATION KITS 

FOR 40MM KEIHIN CV CARB 

Dynojet kits provide broad-range performance gains while maintaining 

stock driveability ❖ Kits include jets, needles, instructions and 

everything necessary to recalibrate stock engines using CV carbs with 

or without an accelerator pump 

$92.99 


Twin Cam 99 H17-049 

Twin Cam 00-06 H17-110 

80” Big Twin 96-99, XL 96-03 H17-200 

80” Big Twin 90-95, XL 90-95; contains jet sizes 150, 160, 170 and 180 H17-0526 

XL1200 Sport 98-03 H17-051 

XL1200/883 (non accel. pump) 88-89 17-1959 

XL 1200C/R 04-06 17-2389 

XL 883 “race only” 89-03 H17-050 

XL 883/C 04-06 17-2388 

Buell Blast 00-09 H17-111 

Buell M2 Cyclone 99-02 (all) H17-226 

49-2954 

18-2952 


FOR S&S E & B SERIES CARBURETORS (17 /8”) 

1” 18-2951 $32.99 

11 /2” 18-2952 37.99 

2” 18-2953 37.99 

FOR S&S G & D SERIES CARBURETORS (21 /16”) 

1” 18-2954 32.99 

11 18-2951 

CARBURETOR SPACERS 

Easy way to add extra torque and horsepower 

❖ 6061 T-6 billet aluminum completely 

eliminates porosity problems ❖ Can be easily 

polished to a bright luster 

/2” 18-2955 37.99 

2” 18-2956 37.99 

49-3586 

49-3587 


FOR CV40/44 CARBURETORS ON BIG TWIN, XL AND BUELL 88-06 (CONT) 

Smooth top cover 49-3586 $51.99 

Smooth top cover w/ choke cable bracket 49-3587 56.99 


TECHNICAL 



18-2953 

525 

F 

U 

E 

L 

/ 

I 

N 

T 

A 

K 

E

F 

U 

E 

L 

/ 

I 

N 

T 

A 

K 

E 

SMOOTH CHROME 

CV CARB TOP COVER 

An inexpensive way to lose that ugly stock 

plastic cover on your carb ❖ Smooth die-cast 

chrome cover for Harley 88-06 models that 

use a CV carb ❖ Installation is easy – just 

remove the four OEM screws, toss that old 

cover away and install the new cover with the 

OEM screws ❖ Replaces OEM NO. 27040-88 

526 

$15.95 


CARBURETOR REBUILD KIT 

Complete set of parts to rebuild an 

HSR42/45 carburetor 

$37.99 

H16-051 

You’ll get that custom look with these highly 

polished chrome covers ❖ Plain 

or with embossed Mikuni logo $21.99 

PART NO. H17-0768 

H17-034 

CARB REBUILD 

KITS AND COMPONENTS 

U.S.A.-made, quality rebuild kits for 

your S&S Super E and Super G series 

carbs ❖ Available in master kits, bodyonly 

kits and accelerator pump kits ❖ Master rebuild kits 

include body, accelerator pump, fasteners, springs, idle 

mixture screw, seat and needle assembly ❖ Accelerator 

pump kit includes diaphragm, spring, check balls and 

springs, pushrod and required hardware ❖ Replacement 

gaskets, O-rings and components are made from the 

highest quality materials available and are sold each 

H49-713 


CARB REBUILD KITS 

Super E master rebuild kit H17-035 $73.99 

Super G master rebuild kit H17-040 73.99 

Super E rebuild kit (body rebuild kit) H17-605 37.99 

Super G rebuild kit (body rebuild kit) H17-606 37.99 

Super B rebuild kit (body rebuild kit) H17-034 37.99 

Accelerator pump rebuild kit H17-607 18.99 


Super E manifold to carburetor O-ring (pr.) H26-188 1.99 

Super G manifold to carburetor O-ring (pr.) H26-187 1.99 

Float bowl gasket Super E and G carburetor H26-186 2.99 

Bowl gasket Super B or D carburetor H26-006 1.99 

H17-035 

CHROME CARB TOP COVERS 

FOR MIKUNI HSR42/45 CARBS 

17-3264 


W/ Mikuni logo H49-713 

REPLACEMENT PARTS FOR HSR42/45 CARB KITS 


Air box adapter w/ three mounting screws H17-005 $17.99 

Short idle screw adjuster H17-006 14.99 

Choke cable, for use with Mikuni plastic nut, spring and brass plunger 17-3264 21.99 

H18-008 

H17-607 

H18-2010 

DESCRIPTION 

REPLACEMENT COMPONENTS (CONT) 


1 /4” insulator block w/ O-ring Super E H18-019 $18.99 

1 /4” insulator block w/ O-ring Super G H18-043 18.99 

1” spacer block Super E H18-008 34.99 

1” spacer block Super G 

Enrichment device for B series carb (will work on Super E and G carbs when 

H18-009 54.99 

changing air cleaners); on/off positions H16-051 30.99 

Gas line insulator, 7” L H18-2010 10.99 

Gas line, 19” L (w/ 90° end) 17-3475 5.99 

Throttle cable guide/bracket for use w/ CV (constant velocity) cables (ea.) 17-3286 11.99 

Throttle cable guide/bracket for use w/ butterfly cables (ea.) 17-3287 10.99 

except as noted ❖ Made in the U.S.A. 17-3475 

H17-006 

H17-605 

H49-714 


Plain H49-714 

H17-005 


TECHNICAL 



H18-019

H17-0500 

GENUINE BENDIX 

CARB REBUILD KITS 

Everything needed to completely overhaul or 

repair a Bendix carburetor ❖ Genuine original equipment kits include 

all necessary gaskets, seals, idle screw and accelerator pump 


40mm Bendix carb rebuild kit for L81-89 H17-112 $46.99 

Bendix carb rebuild kit for XL 72-E76; FX, FL 71-75; repl. OEM NO. 27132-71 H17-0500 43.99 

REBUILD KIT 

FOR KEIHIN CV 

Kit includes all the 

necessary needles, O-rings, 

etc., for a complete rebuild ❖ For Big Twin and XL 88-06 

using CV carbs 


CV carbs 88-06 (Genuine James Gaskets) H17-0424 $37.99 

CV carbs 88-06 (imported) H17-0502 17.99 

CARBURETOR BOWL 

LOCK NUT KIT 

Copper gasket, nut and 

lock washer are included 

❖ Cadmium-plated ❖ Replaces 

OEM NO. 27375-29 


Big Twins 30-65 27-2836 $13.99 

27-2831 

CARBURETOR 

SUPPORT 

BRACKETS 

Complete reproduction 

of original H-D carburetor 

27-2833 

27-2835 

support brackets 

❖ Supports Linkert carburetor 

27-2832 

27-2834 

DESCRIPTION OEM NO. PART NO. PRICE 

For O.H.V. Big Twin 41-53 27431-41 27-2831 $9.99 

For O.H.V. Big Twin 54-65 27431-41B 27-2832 12.99 

For Big Twin 36-38 1110-33 27-2833 9.99 

For Big Twin 39-48 1110-39 27-2834 8.99 

For 45” Solo 36-52 27432-36 27-2835 6.99 

BENDIX CARB REPAIR KIT 

Kit contains all necessary gaskets and seals 


Bendix carb repair kit for XL 72-E76; FX/FL 71-75 (import) 17-3227 $19.95 

H49-196 

CARB REBUILD KITS FOR STANDARD KEIHIN 

FOR H-D 76-89 

Everything you need to rebuild standard Keihin carbs ❖ Feature 

Viton 


Rebuild kit (Made in Japan) H17-0503 $24.95 

Rebuild kit (Made in Taiwan) H49-196 17.99 

® (not neoprene) needles ❖ Replace OEM NO. 27006-76 

CARBURETOR MOUNTING 

SCREW KIT 

Slotted head screws available in 

3 /4”-4 or 15 /16”-4 ❖ Cadmium- or 

parkerized-plated 

$8.99 


3 /4”-4 cadmium; repl. OEM NO. 27422-39 27-2837 

3 /4”-4 parkerized; repl. OEM NO. 27422-39 27-2838 

15 /16”-4 cadmium; repl. OEM NO. 47248-48 27-2839 

15 /16”-4 parkerized; repl. OEM NO. 47248-48 27-2840 

LINKERT/BENDIX 

CARBURETOR 

THROTTLE LEVER WIRE 

BLOCK KIT 

A cadmium-plated block; OEM 

NO. 27450-36, screw, cotter 

pin and brass washers are all 

included in the kit ❖ Come in 

standard or +.005” oversized 


$11.99 

27-3133 


BIG TWIN 36-65, XL 52-56 

Standard 27-3133 

+.005” 27-3134 


TECHNICAL 



527 

F 

U 

E 

L 

/ 

I 

N 

T 

A 

K 

E

F 

U 

E 

L 

/ 

I 

N 

T 

A 

K 

E 

18-5108 

FUEL FILTER KITS 

OEM-style replacement fuel filters ❖ Essential to keep bikes running in top condition 

❖ PART NO. 18-5108 includes filter, fuel line and clamps ❖ PART NO. 18-5109 includes 

filter and O-ring ❖ PART NO. 18-5110 includes filter only ❖ PART NO. 18-5111 includes 

filter, strainer, O-ring, wire ties and clamp 

MODEL & YEAR REPL. OEM NO. PART NO. PRICE 

FXST/FLST 01-07, FLT/FLHT/FLHR/FLHX/FLTR 02-07 w/ Delphi EFI 61001-01 18-5108 $39.95 

FXD 04-12, FXST/FLST 08-12, FLHT/FLHR/FLTR/FLHXXX/FLHTCUTG 08-12 61011-04A 18-5109 14.95 

FLT/FLHT/FLHR/FLTR 95-99 w/ Magnetti Marelli EFI 61343-95 18-5110 39.95 

XL 07-12 75304-07A 18-5111 39.95 

H18-121 H18-122 H18-123 H18-124 H18-125 

CLEAR FUEL FILTERS 

Glass filters feature chrome ends ❖ Available in two inlet sizes: 1 /4” 

or 5 /16” i.d., and in mini (1 3 /8”) and maxi (2 3 /8”) lengths 

❖ Replacement filter elements available 


Maxi filter, 1 /4” inlet H18-124 $10.95 

Maxi filter, 5 /16” inlet H18-122 10.95 

Mini filter, 1 /4” inlet H18-123 10.95 


3 /8” aluminum machined-satin finish fuel filter 18-2916 $36.99 

3 /8” aluminum chrome-finish fuel filter 18-2917 41.99 

-6AN aluminum machined-satin finish fuel filter 18-2918 46.99 

528 

H18-126 


Mini filter, 5 /16” inlet H18-121 $10.95 

Repl. element, mini H18-125 2.95 

Repl. element, maxi H18-126 2.95 


-6AN aluminum chrome-finish fuel filter 18-2919 $52.99 

5 /16” aluminum machined-satin fuel filter H18-118 36.99 

5 /16” chrome fuel filter H18-116 41.99 

18-5109 

18-5110 


TECHNICAL 



18-5111 

PEAK 

FLOW 

SUPER 

MINI FUEL 

FILTER 

Machined from 6061 T-6 anodized aluminum 

❖ Filter element is made from pleated 304 

stainless steel; filters down to 10 microns 

and still flows 6 gal. a minute ❖ Body 

measures 7 /8” L (not including fittings) and 

features 5 /16” fittings ❖ Made in the U.S.A. 

$45.99 PART NO. 18-4939 

18-2916 18-2917 18-2918 18-2919 

H18-116 H18-118 

IN-LINE FUEL FILTERS 

Machined-satin or chrome-finished aluminum high-flow custom fuel filters ❖ Pair with 

Pingel’s high-volume gas valves for optimum performance ❖ High-quality O-rings provide 

a leakproof seal and a special cleanable, reusable 40 micron element gives excellent 

filtration ❖ Made in the U.S.A. 

18-112 

ALLOY 

FUEL FILTERS 

High-performance Russell 

fuel filters are reusable, 

abusable and look great 

❖ Alloy cases resist heat and 

shock ❖ Reusable bronze filter 

elements ensure outstanding 

filtration ❖ Available in four colors 

COLOR HOSE I.D. PART NO. PRICE 

Black 1 /4” 18-456 $16.99 

Chrome 1 /4” 18-112 16.99 

Red 1 /4” 18-113 15.99 

Blue 1 /4” 18-114 15.99 

Black 5 /16” 18-457 15.99 

98-59 

18-113 

18-114 

18-456 

COLOR HOSE I.D. PART NO. PRICE 

Chrome 5 /16” 18-115 $15.99 

Red 5 /16” 18-116 16.99 

Blue 5 /16” 18-117 15.99 

Repl. element/ 

O-ring - 98-59 7.99 


5 /16” glass 18-0608 $9.99 

1 /4” glass 18-0609 9.99 

5 /16” metal 18-0611 8.99 

H18-135 


Repl. 40 micron brass filter element w/ O-ring H18-135 $16.99 

UNIVERSAL 

FUEL FILTERS 

High-performance, 

metal fuel filters have 

brass filter element, 

all-metal casing and 

hose clamps ❖ Glass 

fuel filters feature glass 

body and chrome end 

caps; hose clamps and spare nylon filter element included ❖ Available 

for 1 /4” or 5 18-0608 

18-0611 

/16” fuel lines 


1 /4” metal 18-0612 $8.99 

Repl. filter (10-pk.) 18-0610 8.99

UNIVERSAL FUEL LINE 

CROSSOVER WITH QUICK DISCONNECT 

Braided steel hose features 1 /4” I.D. chrome steel fittings 

❖ Quick-disconnect design halts fuel when tank is removed ❖ 14” 

overall length 

$99.99 PART NO. 18-6144 

UNIVERSAL FUEL LINE CROSSOVERS 

Clear-coated braided hose is constructed of stainless steel ❖ Choice 

of 6” and 9” lengths ❖ Adapters are chromed steel ❖ Work with 

tanks that have 1 /8” NPT ports on tank bottom 


6” 18-5583 $24.99 

18-5583 


9” 18-5584 $25.99 

FUEL LINE CROSSOVER 

FOR CUSTOM TANKS 

For custom tanks with 6” or 9” lengths 

❖ Includes two chrome 90° fittings ❖ Stainless steel braided #3 line 


6” 18-4257 $27.99 

18-4257 


9” 18-4258 $28.99 

FUEL TANK 

CROSSOVER FUEL LINE 

FITTINGS COVER 

FOR FLHT/FLHR/FLTR/FLHX 95-07 

Seamless chrome cover hides the stock black rubber hose and hose 

clamps completely ❖ Easy installation 

$37.99 PART NO. 18-4960 

STERLING CHROMITE ® II 

FUEL TANK CROSS-OVER LINES 

State-of-the-art patented technology to create an exclusive braid that 

looks like chrome to match other 

Magnum cables and lines 

❖ Complete compression-style 

line assemblies with chromeplated 

ends ❖ Unique design 

eliminates leaks ❖ High-quality 

clear covering won’t discolor 


$47.99 

18-2995 

LENGTH 

INCLUDING PART 

MODEL & YEAR 

FITTINGS NO. 

Softail 86-99 11 1 /2” 18-2995 

Softail (except Deuce) 00-12 5” 18-2996 

Deuce 00-07 7” 18-2997 

FLT/FLHT/FLHR 97-07 10 1 /2” 18-2998 

Dyna 03 5 1 /4” 18-2999 

Dyna 04-05 (except FXDWG) 5 3 /4” 18-3000 

FUEL/OIL LINE 

Fuel- and oil-resistant ❖ Made of smoothbore, 

reinforced synthetic rubber ❖ In four 

i.d. size rolls: 1 /4”, 5 /16”, 3 /8” and 1 /2” ❖ Made in the U.S.A. 


1 /4” x 3’ L 18-5568 $14.99 

5 /16” x 3’ L 18-5569 14.99 

3 /8” x 8’ L 49-7378 21.95 

1 /2” x 2’ roll 49-7379 13.95 

FUEL LINE CROSSOVERS 

Clear-coated braided hose is constructed of stainless steel 

❖ Compression fittings are chrome-plated steel ❖ Works with 

OEM-style tanks 



For FXS/FXST/FLST 00-12 

(except FXSTD) 18-5585 $32.99 

For FXST/FLST 86-99 18-5586 32.99 

For FXSTD 00-07 18-5589 32.99 

For FXD 99-05 18-5588 32.99 

For FLT 97-07 18-5587 32.99 

NOTE: Must use Magnum connectors with Magnum braided line. 

18-5585 


SEAL KITS 

For FXS/FXST/FLST 00-12, 

FXSTD 00-07, 

FLT 97-07 (6-pk.) 18-5590 $3.99 

For FXST/FLST 86-99, FXD 

99-05 (6-pk.) 18-5591 3.99 

H19-608 


Braided stainless steel hoses feature 5 /16” 

i.d. for maximum fuel flow ❖ Attach to 

crossover tubes with compression fittings for 

a positive seal – no more worm gear clamps ❖ Made in the U.S.A. 

DESCRIPTION LENGTH PART NO. PRICE 

Universal stainless steel fuel line crossover 11 1 /2” H19-608 $43.99 

For Dyna 99-03 5 1 /2” 18-2616 39.99 

For Softail 86-99 10 3 /4” 18-2617 37.99 

For Softail 00-12 (exc. Deuce) 5 1 /2” 18-2618 33.99 

For FXSTD 00-07 Softail Deuce 5 5 /16” 18-3032 32.99 

For FLT/FLHT/FLHR 97-07 8 1 /2” 18-3011 39.99 

Repl. seals for crossover fuel line (6-pk.) - H49-736 7.99 

FUEL TANK CROSSOVER LINES 

Add the good looks and durability of 

stainless steel to your lower crossover lines 

❖ Compression fittings provide a positive seal 



FLT/FLHT/FLHR 97-07 H18-819 $26.95 

Softail 00-12 (except Deuce) H18-816 26.95 

FXSTD 00-07 H18-817 26.95 

Softail 86-99 H18-818 28.95 

Dyna 93-05 (except FXDWG) H18-815 26.95 

REPLACEMENT WASHER (EA.) 

For fuel lines 18-2849 .95 

H18-817 


TECHNICAL 



18-2849 

STERLING CHROMITE ® II 

BRAIDED FUEL/OIL LINE 

All the features of Magnum’s Sterling Chromite braided line, plus it’s 

covered with a clear Teflon ® skin to protect your bike’s finish 

❖ Premium quality hose uses a tough polyester inner reinforcement 

braid for high burst strength ❖ Cuts easily with scissors ❖ The 

perfect match for Sterling Chromite II control cables and brake lines 

❖ Available in 1 /4” and 3 /8” i.d.; 6’ lengths ❖ Made in the U.S.A. 


1 /4” x 6’ 49-1143 $73.99 


3 /8” x 6’ 49-1145 $77.99 

18-5568 18-5569 49-7378 49-7379 

529 

F 

U 

E 

L 

/ 

I 

N 

T 

A 

K 

E

F 

U 

E 

L 

/ 

I 

N 

T 

A 

K 

E 

STAINLESS STEEL 

BRAIDED FUEL LINE KITS 

FOR CUSTOM USE 

Cut-to-length fuel line kits include 

2’ of fuel line and six hose ends 

with clamps 


1 /4” i.d. H18-541 $29.99 

STAINLESS STEEL 

BRAIDED LINE 

Quality oil and gas lines offer 

years of dependability ❖ Available 

in 3’ and 6’ lengths 


1 /4” x 3’ H18-070 $21.95 

1 /4” x 6’ H18-071 36.95 

5 /16” x 3’ H18-073 24.95 

5 /16” x 6’ H18-074 39.95 

LP (LOW PERMEATION) 

PREMIUM FUEL LINE 

Flexible, kink-resistant fuel line meets 2008 

C.A.R.B. and EPA fuel line permeation 

standards for motorcycles, ATV, snowmobiles, 

PWC and small engines ❖ Gray color 

NOTE: Not for use with fuel-injected models. 


1 /4” i.d. x 3’ L 18-4773 $14.99 

LP (LOW PERMEATION) FUEL LINES 

Cover is heat, oil, ozone and abrasion resistant 

❖ Greenshield barrier technology stops fuel from leaking 

into environment ❖ Available in 2’ lengths ❖ Fuel lines for carb 

models are SAE, EPA and CARB approved ❖ Fuel lines 

for fuel injection 

models are 

CARB-approved 

530 

18-4773 

H18-541 


5 /16” i.d. H18-542 $31.99 

H18-073 


3 /8” x 3’ H18-076 $26.95 

3 /8” x 6’ H18-077 44.95 


5 /16” i.d. x 3’ L 18-4774 $15.99 

FUEL LINES FOR FUEL-INJECTED MODELS 

$12.99 

I.D. PART NO. 

1 /4” 18-5992 

I.D. PART NO. PRICE 

3 /16” 18-5988 $5.99 

1 /4” 18-5989 5.99 

NOTE: Do not use fuel lines for carb models as pressure lines on 

fuel injection systems or cooling systems. 

FUEL LINES FOR CARB MODELS 

I.D. PART NO. 

5 /16” 18-5993 

I.D. PART NO. PRICE 

5 /16” 18-5990 $6.99 

3 /8” 18-5991 7.99 

INTERNAL FUEL LINE 

FOR FXST/FLST 01-07 AND FLHT/FLHR 00-07 

Replaces OEM #62357-00 ❖ Internal fuel line for pump to filter on 

fuel-injected models ❖ Sold each 

$9.95 PART NO. 18-5107 

49-3032 

STAINLESS STEEL BRAIDED LINES 

Neoprene-lined hoses are constructed of tough stainless braid 

❖ Work with Goodridge hose finishers ❖ Can double as fuel line 

❖ Steel or black finish available 


1 /4” HOSE 

6’ 49-3025 $43.99 

10’ 49-3026 66.99 

5 /16” HOSE 

6’ 49-3028 44.99 

10’ 49-3029 73.99 

25’ 49-3030 173.99 

H18-036 

BLACK BRAIDED LINE 

1 /4”, 5 /16”, 3 /8” and 1 /2” hose 

features black nylon braided 

covering ❖ Work for either gas or 

oil applications ❖ Available in 3’ 

and 6’ lengths 


1 /4” x 6’ 49-2684 $36.95 

5 /16” x 6’ 49-2685 39.95 

18-3634 

18-3633 

18-3636 18-3637 


49-5604 


3 /8” HOSE 

6’ 49-3031 $44.99 

6’, black 49-5604 57.99 

10’ 49-3032 75.99 

12’, black 49-5605 113.99 

25’ 49-3033 177.99 


3 /8” x 6’ H18-036 $41.95 

1 /2” x 3’ (for oil tank drains) 49-2686 29.95 

PREMIUM FUEL LINE 

Resists ozone hardening and cracking ❖ More 

durable than vinyl fuel line – use with any type of 

gasoline ❖ Can withstand temperatures from -35°F 

to +165°F; stretches easily over fittings ❖ Available in 3’ length 


DESCRIPTION 

GRAY 


3 

/16” i.d. 18-3629 $9.99 

1 /4” i.d. 18-3630 14.99 

5 

/16” i.d. 

CLEAR 

18-3631 15.99 

1 /8” i.d. 18-5516 9.99 

3 

/16” i.d. 18-3632 9.99 

18-3635 

18-3632 

DESCRIPTION 

CLEAR (CONT) 


1 /4” i.d. 18-3633 $14.99 

5 

/16” i.d. 

BLACK 

18-3634 15.99 

3 

/16” i.d. 18-3635 9.99 

1 /4” i.d. 18-3636 14.99 

5 

/16” i.d. 18-3637 15.99 

BLUE POLYURETHANE 

FUEL LINES 

Made of transparent blue polyurethane 

for long life ❖ High tensile strength line 

resists abrasion and kinks, yet is flexible and easy to work with 

❖ Superior chemical resistance to gasoline, grease and oil 

❖ Temperature rating -65°F to 220°F ❖ Sold in 5’ lengths 



1 /16” i.d 18-5003 $.95 

1 /8” i.d. 18-5004 1.95 


TECHNICAL 



18-3629 


3 /16” i.d. 18-5005 $2.95 

1 /4” i.d. 18-5006 2.95 

5 /16” i.d. 18-5007 3.95

FUEL AND CARBURETOR 

VENT LINES 

Moose Racing’s high-quality polyurethane fuel 

line is offered in 3’ lengths in 1 /4”, 3 /16” and 

5 /16” i.d.; carb vent line in 5’ lengths in 1 /8” 

i.d. ❖ Clear or black ❖ Made in the U.S.A. 

NOTE: Not to be used with fuel over 10% alcohol. 


FUEL LINE 3’ 

1 /4”, clear 18-0600 $6.95 

1 /4”, black 18-0601 6.95 

3 /16”, clear 18-0602 6.95 

3 /16”, black 18-0603 6.95 

5 /16”, clear 18-5010 6.95 

POLISHED 

CHROME HOSE 

CONNECTORS 

Put the finishing touch 

to that hose installation 

❖ Smooth polished finish ❖ Include stainless 

steel worm gear clamps ❖ For use with Drag 

Specialties and Magnum braided line 

17-1136 

DESCRIPTION 

FUEL LINE 3’ (CONT) 


5 /16”, black 

CARB VENT LINE 5’ 

18-5011 $6.95 

1 /8”, clear 17-1136 8.95 

1 /8”, black 17-1137 8.95 


For 1 /4” - 5 /16” hose ends (2-pk.) H18-1053 $38.99 

For 1 /4” - 5 /16” hose ends (6-pk.) H18-1050 67.99 

For 3 /8” hose ends (2-pk.) H18-1052 37.99 

For 3 /8” hose ends (6-pk.) H18-1051 36.99 

18-3768 18-3769 18-3772 18-3773 

COLORED HOSE CLAMPS 

Custom colors for use with braided copper and 

stainless steel hoses ❖ Fit over most manufacturer’s 

braided rubber hoses ❖ Manufactured from brass and 

finished with a matte metallic powder-coat ❖ Sold 

each (an average FXST or custom will use a minimum 

of two fuel line clamps and six oil line clamps) 



FOR 1 /4” AND 5 /16” FUEL LINE 

Black 18-3767 $5.99 

Copper 18-3769 6.99 

Silver 18-3771 5.99 

Brass 18-3773 5.99 

18-5190 

18-5192 

18-5191 

FUEL PUMP CLAMPS 

Stainless steel clamps with one-ear Stepless style for a full 360° of 

closure around hose without any gaps ❖ Use when servicing the fuel 

pump and filter on EFI models ❖ Sold each ❖ Requires a PEX-style 

clamping tool to crimp ends (not available from 

Dennis Kirk) ❖ Made in the U.S.A. 

$1.99 


7 /16”; repl. OEM NO. 10222 18-5190 

1 /2”; repl. OEM NO. 10304 18-5191 


2”; repl. OEM NO. 10303 18-5192 

STAINLESS STEEL MINI-CLAMP 

Great looking clamp designed for use on oil and gas 

lines up to 3 /8” in diameter ❖ Made in the U.S.A.; 

sold each 

$1.99 

H18-1050 


FOR 3 /8” OIL LINE 

Black 18-3768 $5.99 

Copper 18-3770 6.99 

Silver 18-3772 5.99 

Brass 18-3774 5.99 

PART NO. 27-0188 

UNIVERSAL FUEL/OIL LINE 

Universal black reinforced line is fuel- and oilresistant 

❖ Fuel/oil line comes in 5’ rolls 


1 /4” x 5’ 49-2413 $4.99 

5 

/16” x 5’ 49-2414 5.50 

3 /8” x 5’ 49-2415 $5.99 

O-CLIPS FOR FUEL LINE 

O-clips for vinyl or Tygon fuel line; sold 

individually ❖ Require O-clip tool 

PART NO. 28-2568 to crimp ends; see 

SHOP/TOOLS section 


5 

/16” O-clip 27-2206 $1.10 

7 

/16” O-clip 27-1207 .70 

1 /2” O-clip 27-1208 .90 

9 

/16” O-clip 27-2207 .80 

49-5606 

FINISHERS 

These 1 /4” or 5 /16”-3 /8” finishers fit hose line 

kits perfectly ❖ Choose either chrome-plated 

steel or blue anodized aluminum in either size or red anodized 

aluminum in 5 /16”-3 27-1217 

/8” 

❖ Sold each 

$4.99 

COLOR PART NO. 

1 /4” 

Blue 27-1215 


5 /16”- 3 /8” 

Blue H18-590 

27-1216 

GROOVED CHROME HOSE 

ENDS WITH CLAMPS 

Grooved hose end clamps give a finished look to 

rubber or braided oil/gas lines ❖ Sold each 

$4.95 

COLOR 

5 /16”-3 /8” (CONT) 

PART NO. 

Chrome H18-591 

Red 27-1217 

Black 49-56061 1 PRICE $5.99. 


TECHNICAL 



H18-590 

H18-1037 


3 /8” hose ends H18-1037 

1 /4” hose ends (stainless steel lines); 5 /16” hose ends (rubber lines) H18-1038 

WIRE 

CLAMPS 

Wire hose clamps 

are self-tensioning for use on fuel or 

vacuum lines ❖ Functional, durable and 

long-lasting quality plated-steel construction 

❖ 15-piece set includes five each of 1 /4”, 

5 /16” and 7 /16” i.d. clamps; 150-piece set 

includes 50 of each size ❖ Made in the U.S.A. 


15-pk. 27-833 $7.95 


150-pk. 27-0178 $23.95 

FUEL LINE FITTING COVER 

Two-piece streamlined cover adds a 

beautiful chrome touch ❖ Fits all fuelinjected 

Softails 01-12, FLT, FLHT and 

FLHR fuel-injected models 02-07 and fuel-injected Dyna 

models 04-12 

$37.99 PART NO. 18-3217 

531 

F 

U 

E 

L 

/ 

I 

N 

T 

A 

K 

E

GUARANTEED LOWEST PRIICES 

$1 OFF EVERYONE ELSE’S DEAL! 

If any current competitor offers a better deal on their website, in 

their catalog or in their print ad’s on items carried by Dennis Kirk ... 

we will beat their price by $1. 

Qualified Items 

� Any item priced over $100 in our catalog or website 

� Any item in the following categories (regardless of price): 

o Helmets 

o Tires 

o Complete Exhaust Systems 

o Engines 

o Transmissions 

o Frames 

o Tracks 

o Impellers 

o Wetsuits 

Comparison Details 

� Comparisons are done based on the total delivered price 

including freight, handling fees, and other charges. 

� Competitor prices must be verifiable to qualify. 

Call us at 800-970-1328 for questions 

or to place your order!

Autotune kit for power vision

Create successful ePaper yourself

Delete template?

Save as template?