tiptronic 6270.pdf - Pfaff

I
38
Setting the stitch width/pattern width
Any time a new program is selected the machine -
adjusts itself to a specific default value for the stitch
or pattern width.
The stitch or pattern width is shown in the display
in the top line on the left, i.e. 3.0 mm for program
10,
When the upper lamp of the stitch width slide key
(7) lights up, you can infinitely adjust the desired
stitch or pattern width within a range from 0 to 6
mm.
When the bottom light of the stitch width slide key
(7) has lit up, you can set up to 1 3 needle positi
ons. This is possible in programs 02, 03, 06 and
07.
—-—
— 1
Adjusting the needle position
When selecting one of these programs the symbol
‘1-” is shown in the upper display line. This means
that the needle is in center position. Now you can
change the needle position.
If the default setting had been altered, it can be
recalled by pressing the “+1—” toggle switches of
the program keys for both unit digits and tens
digits, thus reselecting the pattern.
The display shows i.e.
L6 2,5
02
i.e. the needle moves 6 positions
to the left
3J 2,5
02
i.e. the needle moves three positions
to the right
1
[1j
rFj
iii
I’ —_i
11
Cl