tiptronic 6270.pdf - Pfaff

Press the m)-key (1 5). Program 60 is stored in the
pattern sequence. Input the entire pattern
sequence, i.e. 60, 61 and 53.
Any time a pattern is stored a message appears for
a short time to inform you that your pattern has
been added to the pattern sequence. After the last
input the foBowing message appears for a short
time:
44
Apart from characters it is also possible to combine
patterns in a pattern sequence. Use the program
keys for tens digits (26) and forunit digits (13) to
select the number of the desired pattern (i.e. 60).
m) 3 3
53
Width, length and balance can still be altered.
To check the sequence, select the patterns anew.
In the top line on the left the number of patterns
stored in the pattern sequence is indicated, three in
this example. In the top line on the right the posi
tion of the pattern shown in the display is indica
ted; in this case program 60 is at the first position.
The bottom line on the left tells you that you are in
the m memory.
r
-f
F.
F
I
-j