"Front Matter". In: Modern Polyesters: Chemistry and Technology of ...

Recommendations

Info

Contributors Andrew E. Brink, Hydrosize Technologies, Inc., 9201 Dawnshire Road, Raleigh, NC 27615, USA Daniel J. Brunelle, GE Global Research, Building K-1, Room 5A26, One Research Circle, PO Box 8, Schenectady, NY 12309, USA Doug D. Callander, M & G Polymers USA, LLC, PO Box 590, 6951 Ridge Road, Sharon Center, OH 44274, USA Andreas Christel, Department TP51, Bühler AG, CH-9240 Uzwil, Switzerland Hoe H. Chuah, Shell Chemical LP, Westhollow Technology Center, 3333 Highway 6 South, Houston, TX 77082-3101, USA Horst Clauberg, Kulicke and Soffa Industries, Inc., 2101 Blair Mill Rd, Willow Grove, PA 19090, USA David D. Cornell, D. D. Cornell Associates LLC, 230 Hammond Avenue, Kingsport, TN 37660, USA Brent Culbert, Department TP51, Bühler AG, CH-9240 Uzwil, Switzerland
xxiv CONTRIBUTORS John R. Dombroski, Polymers Technology Department, Eastman Chemical Company, Kingsport, TN 37662, USA David R. Fagerburg, Northeast State Technical Community College, Blountville, TN 37617, USA Robert Gallucci, Global Color Technology, General Electric Company (GE Plastics), One ColorXpress Way, Selkirk, NY 12158, USA F. Glenn Gallagher, DuPont Experimental Station, Building E304, Room C320, Wilmington, DE 19880-0304, USA Wolfgang Göltner, Mönchesweg 18, D-36251 Bad Hersfeld, Germany Bin Hu, Department of Chemistry, Virginia Commonwealth University, Richmond, VA 23284, USA Toshihide Inoue, Chemicals Research Laboratories, Toray Industries, Inc., 2-2-1, Nihonbashi–Muromachi Chuo-ku, Tokyo 103-8666, Japan Keith G. Johnson, Structural Composites, Inc., Melbourne, FL 32903, USA Seong Hun Kim, Department of Fibre and Polymer Engineering, Centre for Advanced Functional Polymers, Hanyang University, Seoul 133-791, Korea J. Eric McIntyre, 3 Rossett Gardens, Harrogate, HG2 9PP, UK Raphael M. Ottenbrite, Department of Chemistry, Virginia Commonwealth University, Richmond, VA 23284, USA Bimal R. Patel, Global Color Technology, General Electric Company (GE Plastics), One ColorXpress Way, Selkirk, NY 12158, USA Glen Reese, KoSa Corporation, 4601 Carmel Vista Lane, Charlotte, NC 28226, USA
Page 1 and 2: Modern Polyesters: Chemistry and Te
Page 3 and 4: Contents Contributors .............
Page 5 and 6: CONTENTS vii 4 Polycondensation Pro
Page 7 and 8: CONTENTS ix 2.3.1 The Removal of Si
Page 9 and 10: CONTENTS xi 9.1 CHDM-based Copolyes
Page 11 and 12: CONTENTS xiii 4.6 Labels ..........
Page 13 and 14: CONTENTS xv 2.1 Spinnability ......
Page 15 and 16: CONTENTS xvii 4 Composite Propertie
Page 17 and 18: CONTENTS xix 2.2 Preparation of Fib
Page 19: CONTENTS xxi 3 Results and Discussi
Page 23 and 24: Series Preface The Wiley Series in
Page 25 and 26: xxx PREFACE Polyester copolymers (o
Page 27 and 28: About the Editors Dr John Scheirs h
Page 29 and 30: 1 The Historical Development of Pol
Page 31 and 32: THE HISTORICAL DEVELOPMENT OF POLYE
Page 55 and 56: PART II Polymerization and Polycond
Page 57 and 58: 32 TH. RIECKMANN AND S. VÖLKER BOP
Page 59 and 60: 34 TH. RIECKMANN AND S. VÖLKER Re
Page 61 and 62: 36 TH. RIECKMANN AND S. VÖLKER Dir
Page 63 and 64: 38 TH. RIECKMANN AND S. VÖLKER Tab
Page 65 and 66: 40 TH. RIECKMANN AND S. VÖLKER wei
Page 71 and 72:
46 TH. RIECKMANN AND S. VÖLKER Tab
Page 73 and 74:
48 TH. RIECKMANN AND S. VÖLKER pro
Page 75 and 76:
50 TH. RIECKMANN AND S. VÖLKER K =
Page 77 and 78:
52 TH. RIECKMANN AND S. VÖLKER dim
Page 79 and 80:
54 TH. RIECKMANN AND S. VÖLKER De
Page 81 and 82:
56 TH. RIECKMANN AND S. VÖLKER TPA
Page 83 and 84:
58 TH. RIECKMANN AND S. VÖLKER ln
Page 85 and 86:
60 TH. RIECKMANN AND S. VÖLKER HO
Page 87 and 88:
62 TH. RIECKMANN AND S. VÖLKER in
Page 89 and 90:
64 TH. RIECKMANN AND S. VÖLKER * *
Page 91 and 92:
Table 2.8 Publications on kinetics
Page 93 and 94:
68 TH. RIECKMANN AND S. VÖLKER Int
Page 95 and 96:
Page 97 and 98:
72 TH. RIECKMANN AND S. VÖLKER det
Page 99 and 100:
74 TH. RIECKMANN AND S. VÖLKER log
Page 101 and 102:
76 TH. RIECKMANN AND S. VÖLKER and
Page 103 and 104:
78 TH. RIECKMANN AND S. VÖLKER 3.2
Page 105 and 106:
80 TH. RIECKMANN AND S. VÖLKER of
Page 107 and 108:
Page 109 and 110:
84 TH. RIECKMANN AND S. VÖLKER Fil
Page 111 and 112:
86 TH. RIECKMANN AND S. VÖLKER D E
Page 113 and 114:
Page 115 and 116:
90 TH. RIECKMANN AND S. VÖLKER Sin
Page 117 and 118:
92 TH. RIECKMANN AND S. VÖLKER The
Page 119 and 120:
94 TH. RIECKMANN AND S. VÖLKER (a)
Page 121 and 122:
96 TH. RIECKMANN AND S. VÖLKER Vac
Page 123 and 124:
Page 125 and 126:
100 TH. RIECKMANN AND S. VÖLKER Fi
Page 127 and 128:
102 TH. RIECKMANN AND S. VÖLKER Fi
Page 129 and 130:
104 TH. RIECKMANN AND S. VÖLKER es
Page 131 and 132:
106 TH. RIECKMANN AND S. VÖLKER 25
Page 133 and 134:
108 TH. RIECKMANN AND S. VÖLKER an
Page 135 and 136:
Page 137 and 138:
Page 139 and 140:
Page 141 and 142:
3 Synthesis and Polymerization of C
Page 143 and 144:
CYCLIC POLYESTER OLIGOMERS 119 Duri
Page 145 and 146:
CYCLIC POLYESTER OLIGOMERS 121 at l
Page 147 and 148:
CYCLIC POLYESTER OLIGOMERS 123 (a)
Page 149 and 150:
CYCLIC POLYESTER OLIGOMERS 125 be d
Page 151 and 152:
CYCLIC POLYESTER OLIGOMERS 127 cata
Page 153 and 154:
CYCLIC POLYESTER OLIGOMERS 129 simi
Page 155 and 156:
CYCLIC POLYESTER OLIGOMERS 131 BHET
Page 157 and 158:
CYCLIC POLYESTER OLIGOMERS 133 Cycl
Page 159 and 160:
CYCLIC POLYESTER OLIGOMERS 135 Init
Page 161 and 162:
CYCLIC POLYESTER OLIGOMERS 137 Tabl
Page 163 and 164:
CYCLIC POLYESTER OLIGOMERS 139 as h
Page 165 and 166:
CYCLIC POLYESTER OLIGOMERS 141 23.
Page 167 and 168:
4 Continuous Solid-State Polyconden
Page 169 and 170:
SOLID-STATE POLYCONDENSATION OF POL
Page 171 and 172:
Page 173 and 174:
Page 175 and 176:
Page 177 and 178:
Page 179 and 180:
Page 181 and 182:
Page 183 and 184:
Page 185 and 186:
Page 187 and 188:
Page 189 and 190:
Page 191 and 192:
Page 193 and 194:
Page 195 and 196:
Page 197 and 198:
Page 199 and 200:
Page 201 and 202:
Page 203 and 204:
Page 205 and 206:
Page 207 and 208:
Page 209 and 210:
Page 211 and 212:
Page 213 and 214:
Page 215 and 216:
Page 217 and 218:
Page 219 and 220:
5 Solid-State Polycondensation of P
Page 221 and 222:
Page 223 and 224:
Page 225 and 226:
Page 227 and 228:
Page 229 and 230:
Page 231 and 232:
Page 233 and 234:
Page 235 and 236:
Page 237 and 238:
Page 239 and 240:
Page 241 and 242:
Page 243 and 244:
Page 245 and 246:
Page 247 and 248:
Page 249 and 250:
1.225 250 SOLID-STATE POLYCONDENSAT
Page 251 and 252:
Page 253 and 254:
Page 255 and 256:
Page 257 and 258:
Page 259 and 260:
Page 261 and 262:
Page 263 and 264:
Page 265 and 266:
Page 267 and 268:
PART III Types of Polyesters Modern
Page 269 and 270:
246 D. A. SCHIRALDI of flammability
Page 271 and 272:
248 D. A. SCHIRALDI been shown to l
Page 273 and 274:
250 D. A. SCHIRALDI E E A E E E E A
Page 275 and 276:
252 D. A. SCHIRALDI Table 6.1 Therm
Page 277 and 278:
254 D. A. SCHIRALDI HO 2 C 2,6-NDA
Page 279 and 280:
256 D. A. SCHIRALDI and defy simple
Page 281 and 282:
258 D. A. SCHIRALDI O Ph N O CO 2 C
Page 283 and 284:
260 D. A. SCHIRALDI O O O O O O O O
Page 285 and 286:
262 D. A. SCHIRALDI REFERENCES 1. W
Page 287 and 288:
264 D. A. SCHIRALDI 46. Liu, Y., Ma
Page 289 and 290:
7 Amorphous and Crystalline Polyest
Page 291 and 292:
POLYESTERS BASED ON 1,4-CYCLOHEXANE
Page 293 and 294:
Page 295 and 296:
Page 297 and 298:
Page 299 and 300:
Page 301 and 302:
Page 303 and 304:
Page 305 and 306:
Page 307 and 308:
Page 309 and 310:
Page 311 and 312:
Page 313 and 314:
Page 315 and 316:
8 Poly(Butylene Terephthalate) R. R
Page 317 and 318:
POLY(BUTYLENE TEREPHTHALATE) 295 Ta
Page 319 and 320:
POLY(BUTYLENE TEREPHTHALATE) 297 In
Page 321 and 322:
POLY(BUTYLENE TEREPHTHALATE) 299 bu
Page 323 and 324:
POLY(BUTYLENE TEREPHTHALATE) 301 cl
Page 325 and 326:
POLY(BUTYLENE TEREPHTHALATE) 303 Th
Page 327 and 328:
POLY(BUTYLENE TEREPHTHALATE) 305 3.
Page 329 and 330:
POLY(BUTYLENE TEREPHTHALATE) 307 3.
Page 331 and 332:
POLY(BUTYLENE TEREPHTHALATE) 309 E
Page 333 and 334:
POLY(BUTYLENE TEREPHTHALATE) 311 to
Page 335 and 336:
POLY(BUTYLENE TEREPHTHALATE) 313 ph
Page 337 and 338:
POLY(BUTYLENE TEREPHTHALATE) 315 In
Page 339 and 340:
POLY(BUTYLENE TEREPHTHALATE) 317 7
Page 341 and 342:
Page 343 and 344:
Page 345 and 346:
324 D. D. CALLANDER H H O O C O O C
Page 347 and 348:
326 D. D. CALLANDER higher manufact
Page 349 and 350:
328 D. D. CALLANDER for PET are oft
Page 351 and 352:
330 D. D. CALLANDER T g (°C) 130 1
Page 353 and 354:
332 D. D. CALLANDER resulting balan
Page 355 and 356:
334 D. D. CALLANDER 12. Jenkins, S.
Page 357 and 358:
336 B. HU, R. M. OTTENBRITE AND J.
Page 359 and 360:
Page 361 and 362:
Page 363 and 364:
Page 365 and 366:
Page 367 and 368:
Page 369 and 370:
Page 371 and 372:
Page 373 and 374:
Page 375 and 376:
Page 377 and 378:
Page 379 and 380:
Page 381 and 382:
Page 383 and 384:
362 H. H. CHUAH for making soft, st
Page 385 and 386:
364 H. H. CHUAH 3. Instead of cycli
Page 387 and 388:
366 H. H. CHUAH Table 11.1 (continu
Page 389 and 390:
368 H. H. CHUAH O C O O H CH 2 CH C
Page 391 and 392:
370 H. H. CHUAH ηsp, and relative
Page 393 and 394:
372 H. H. CHUAH Endotherm (a) (b) C
Page 395 and 396:
374 H. H. CHUAH At 71 ◦ C, PTT cr
Page 397 and 398:
376 H. H. CHUAH E ′′ (GPa) 0.15
Page 399 and 400:
378 H. H. CHUAH Viscosity (Pa s) 5
Page 401 and 402:
380 H. H. CHUAH Immediate strain re
Page 403 and 404:
382 H. H. CHUAH highly contracted P
Page 405 and 406:
384 H. H. CHUAH room temperature. I
Page 407 and 408:
386 H. H. CHUAH (a) (b) Figure 11.1
Page 409 and 410:
388 H. H. CHUAH and cold-crystalliz
Page 411 and 412:
390 H. H. CHUAH Table 11.8 Properti
Page 413 and 414:
392 H. H. CHUAH 7. Harris, M. E., U
Page 415 and 416:
394 H. H. CHUAH 49. Pyda, M., Bolle
Page 417 and 418:
396 H. H. CHUAH 90. Chuah, H. H., P
Page 419 and 420:
PART IV Fibers and Compounds Modern
Page 421 and 422:
402 G. REESE Tonnes (× 10 6 ) 18 1
Page 423 and 424:
404 G. REESE Additives and copolyme
Page 425 and 426:
406 G. REESE degradation reactions
Page 427 and 428:
408 G. REESE melting points range f
Page 429 and 430:
410 G. REESE to be flexible in orde
Page 431 and 432:
412 G. REESE range up to several th
Page 433 and 434:
414 G. REESE The melt spinning proc
Page 435 and 436:
416 G. REESE Publisher's Note: Perm
Page 437 and 438:
418 G. REESE While it is evident th
Page 439 and 440:
420 G. REESE The use of a post-draw
Page 441 and 442:
422 G. REESE for PET staple fibers.
Page 443 and 444:
424 G. REESE 6.2 LOW PILL FIBERS In
Page 445 and 446:
426 G. REESE OCH 2CH 2O O O C C n O
Page 447 and 448:
428 G. REESE Core/Sheath Side/Side
Page 449 and 450:
430 G. REESE types, can be post-pro
Page 451 and 452:
432 G. REESE From the proprietary d
Page 453 and 454:
13 Relationship Between Polyester Q
Page 455 and 456:
RELATIONSHIP BETWEEN POLYESTER QUAL
Page 457 and 458:
Page 459 and 460:
Page 461 and 462:
Page 463 and 464:
Page 465 and 466:
Page 467 and 468:
Page 469 and 470:
Page 471 and 472:
Page 473 and 474:
Page 475 and 476:
Page 477 and 478:
Page 479 and 480:
Page 481 and 482:
Page 483 and 484:
Page 485 and 486:
Page 487 and 488:
Page 489 and 490:
Page 491 and 492:
Page 493 and 494:
Page 495 and 496:
Page 497 and 498:
Page 499 and 500:
Page 501 and 502:
Page 503 and 504:
Page 505 and 506:
Page 507 and 508:
Page 509 and 510:
Page 511 and 512:
Page 513 and 514:
496 J. SCHEIRS found application in
Page 515 and 516:
498 J. SCHEIRS Raising the molecula
Page 517 and 518:
500 J. SCHEIRS HO HO HO O PET C O P
Page 519 and 520:
502 J. SCHEIRS 2.2 PHENYLENEBISOXAZ
Page 521 and 522:
504 J. SCHEIRS 2.4 TETRAEPOXIDE CHA
Page 523 and 524:
506 J. SCHEIRS Intrinsic viscosity
Page 525 and 526:
508 J. SCHEIRS Table 14.3 Commercia
Page 527 and 528:
510 J. SCHEIRS O PET C OH in situ r
Page 529 and 530:
512 J. SCHEIRS 5 µm Figure 14.10 E
Page 531 and 532:
514 J. SCHEIRS The PARALOID EXL ran
Page 533 and 534:
516 J. SCHEIRS somewhat effective i
Page 535 and 536:
518 J. SCHEIRS more salt will react
Page 537 and 538:
Page 539 and 540:
Page 541 and 542:
524 J. SCHEIRS Stabaxol P is used
Page 543 and 544:
526 J. SCHEIRS Table 14.11 Property
Page 545 and 546:
528 J. SCHEIRS Table 14.12 Commerci
Page 547 and 548:
530 J. SCHEIRS during the processin
Page 549 and 550:
532 J. SCHEIRS 12 TECHNOLOGY OF COM
Page 551 and 552:
534 J. SCHEIRS a typical formulatio
Page 553 and 554:
536 J. SCHEIRS required. Alternativ
Page 555 and 556:
538 J. SCHEIRS 11. Karayannidis, G.
Page 557 and 558:
540 J. SCHEIRS 42. Akkapeddi, M. K.
Page 559 and 560:
542 A. E. BRINK 25 20 5 50 Electric
Page 561 and 562:
544 A. E. BRINK rapidly into the co
Page 563 and 564:
546 A. E. BRINK 2.2 ADVANTAGES OF P
Page 565 and 566:
548 A. E. BRINK Table 15.3 Performa
Page 567 and 568:
550 A. E. BRINK effect on the compo
Page 569 and 570:
552 A. E. BRINK in standard tensile
Page 571 and 572:
554 A. E. BRINK was compared to the
Page 573 and 574:
556 A. E. BRINK Table 15.9 Effect o
Page 575 and 576:
558 A. E. BRINK composites. These m
Page 577 and 578:
560 A. E. BRINK 27. Kelly, A. and T
Page 579 and 580:
562 A. E. BRINK 60. Hawley, R. C.,
Page 581 and 582:
16 Recycling Polyesters by Chemical
Page 583 and 584:
RECYCLING POLYESTERS BY CHEMICAL DE
Page 585 and 586:
Page 587 and 588:
Page 589 and 590:
Page 591 and 592:
Page 593 and 594:
Page 595 and 596:
Page 597 and 598:
Page 599 and 600:
Page 601 and 602:
Page 603 and 604:
Page 605 and 606:
Page 607 and 608:
17 Controlled Degradation Polyester
Page 609 and 610:
CONTROLLED DEGRADATION POLYESTERS 5
Page 611 and 612:
Page 613 and 614:
Page 615 and 616:
Page 617 and 618:
Page 619 and 620:
Page 621 and 622:
Page 623 and 624:
Page 625 and 626:
18 Photodegradation of Poly(Ethylen
Page 627 and 628:
PHOTODEGRADATION OF PET AND PECT 61
Page 629 and 630:
Page 631 and 632:
Page 633 and 634:
Page 635 and 636:
Page 637 and 638:
Page 639 and 640:
Page 641 and 642:
Page 643 and 644:
Page 645 and 646:
Page 647 and 648:
Page 649 and 650:
Page 651 and 652:
Page 653 and 654:
Page 655 and 656:
Page 657 and 658:
Page 659 and 660:
19 High-Performance Liquid Crystal
Page 661 and 662:
HIGH-PERFORMANCE LIQUID CRYSTAL POL
Page 663 and 664:
Page 665 and 666:
Page 667 and 668:
Page 669 and 670:
Page 671 and 672:
Page 673 and 674:
Page 675 and 676:
Page 677 and 678:
Page 679 and 680:
20 Thermotropic Liquid Crystal Poly
Page 681 and 682:
LIQUID CRYSTAL POLYMER REINFORCED P
Page 683 and 684:
Page 685 and 686:
Page 687 and 688:
Page 689 and 690:
Page 691 and 692:
Page 693 and 694:
Page 695 and 696:
Page 697 and 698:
Page 699 and 700:
Page 701 and 702:
Page 703 and 704:
Page 705 and 706:
Page 707 and 708:
Page 709 and 710:
Page 711 and 712:
PART VII Unsaturated Polyesters Mod
Page 713 and 714:
700 K. G. JOHNSON AND L. S. YANG 2
Page 715 and 716:
702 K. G. JOHNSON AND L. S. YANG A
Page 717 and 718:
704 K. G. JOHNSON AND L. S. YANG as
Page 719 and 720:
706 K. G. JOHNSON AND L. S. YANG Ta
Page 721 and 722:
708 K. G. JOHNSON AND L. S. YANG cl
Page 723 and 724:
710 K. G. JOHNSON AND L. S. YANG ap
Page 725 and 726:
712 K. G. JOHNSON AND L. S. YANG wh
Page 727 and 728:
22 PEER Polymers: New Unsaturated P
Page 729 and 730:
PEER POLYMERS: NEW UNSATURATED POLY
Page 731 and 732:
Page 733 and 734:
Page 735 and 736:
Page 737 and 738:
Page 739 and 740:
Page 741 and 742:
Page 743 and 744:
Page 745 and 746:
734 INDEX benzoyl peroxides (BPOs)
Page 747 and 748:
736 INDEX differential thermal anal
Page 749 and 750:
738 INDEX Impet 533-4 impurities 45
Page 751 and 752:
740 INDEX PBT (continued) rheologic
Page 753 and 754:
742 INDEX PET (continued) esterific
Page 755 and 756:
744 INDEX PET copolymers (continued
Page 757 and 758:
746 INDEX poly(propylene ether) tri
Page 759 and 760:
748 INDEX solid-state polycondensat
Page 761:
750 INDEX wide-angle X-ray diffract
show all

"Front Matter". In: Modern Polyesters: Chemistry and Technology of ...

Create successful ePaper yourself

Delete template?

Save as template?