Cisco IOS Security Command Reference

Security Commands
description (identify zone)
Syntax Description
Command Default None
January 2008
Cisco IOS Security Command Reference
description (identify zone)
To enter a description of a zone, use the description command in security zone configuration mode. To
remove the description of the zone, use the no form of this command.
description line-of-description
no description line-of-description
Command Modes Security zone configuration
Command History
Usage Guidelines You can use this subcommand after entering the zone security or zone-pair security command.
Examples The following example specifies that zone z1 is a testzone:
Related Commands
line-of-description Description of the zone. You can enter up to 40 characters.
Release Modification
12.4(6)T This command was introduced.
zone security z1
description testzone
Command Description
zone-pair security Creates a zone-pair that is the type security.
zone security Creates a zone.
SEC-687