DTE Chiller - Cooling Heating system - Fergutec.com

Fergutec
Available from stock :
P. O. Box 639
NL - 5550 AP Valkenswaard
Tel: +31 (0)40 204 69 31
Fax: +31 (0)40 201 39 81
E - mail: info@fergutec.nl
DTE (Dutch Thermal Engineering)
Chiller/Heater (cooling and heating system)
SHOWN LEFT ON BELOW PICTURE IN STAINLESS STEEL CABINET
Fergutec b.v. P.O. Box 639, NL - 5550 AP Valkenswaard Heistraat 64, NL - 5554 ER Valkenswaard
Bankaccount 45.80.36.714 ABN - AMRO Valkenswaard C.o.C. Eindhoven no. 17098554 VAT - ID NL8095.60.185.B01
The Standard Terms and Conditions, lodged at the Chamber of Commerce in Eindhoven, are applicable to all transactions.

Fergutec DTE Cooling and Heating System page 2.
System features :
• Designed for use with clean tap water or better.
• 2 Cooling and 1 Heating circuits.
• Storage tanks with hot and cold water sections
• Heat exchanger system
- Primary side cooled by factory cooling system (customer)
- Secondary side connected to cold water section of the internal storage tank and equipped with
circulation pump and temperature controlled valve. Temperature in cold water section to be
regulated within 20 - 25˚C
• Cooling circuit 1 : 9kW cooling capacity at water temperature 20˚C. Cooling water flow 790 liters
per hour at 5 - 5.5 Bar abs. Equipped with separate circulation pump.
• Cooling circuit 2 : 11kW cooling capacity at water temperature 20˚C. Cooling water flow 900
liters per hour at 5 - 5.5 Bar abs. Equipped with separate circulation pump.
• Heating circuit 1 : 10kW heating capacity by electric heating element – remotely controlable.
Water flow 900 liters per hour at 5 - 5.5 Bar abs. Equipped with separate circulation pump.
Temperature range 40 – 65 20˚C.
• CE certificate
• Additional specifications upon request.