Water Management Australia and New Zealand - Ferret
Water Management Australia and New Zealand - Ferret
Water Management Australia and New Zealand - Ferret
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
LIGHT WATER POWER AIR<br />
<strong>Water</strong> <strong>Management</strong><br />
<strong>Australia</strong> <strong>and</strong> <strong>New</strong> Zeal<strong>and</strong>
People You Know. Br<strong>and</strong>s You Trust<br />
The world’s best-regarded water management br<strong>and</strong>s are united by a common vision - they’re engineered <strong>and</strong> built to<br />
make mining <strong>and</strong> construction projects safer <strong>and</strong> more productive while being sensitive to the environment.<br />
Our flagship water management br<strong>and</strong>, Sykes has been<br />
a major force in the world’s auto-prime pump market<br />
for over 40 years. Much of its success reflects its<br />
cleverly designed priming systems which improve fluid<br />
h<strong>and</strong>ling efficiencies <strong>and</strong> greatly reduce maintenance<br />
requirements. A ‘snore’ facility built into its groundbreaking<br />
auto-priming pumps, for example, means they<br />
can run dry without damage for extended periods.<br />
From manufacturing bases in <strong>Australia</strong> <strong>and</strong> Dubai the<br />
br<strong>and</strong> has systematically added to its domestic market<br />
domination via established distribution networks across a<br />
number of key global markets.<br />
Also available exclusively throughout Australasia<br />
from AllightSykes, Dragflow agitator slurry pumps are<br />
designed to move dense slurries. Unlike most competitive<br />
pumps, they can pick up solids from rest, mix them into<br />
a high density slurry <strong>and</strong> then pump them – all in one<br />
operation.<br />
Grindex submersible pumps have been the water<br />
management solutions of choice across Australasia for<br />
more than four decades. Durable high performers, the<br />
range of drainage <strong>and</strong> sludge pumps owes its success<br />
to clever design features, ease of maintenance <strong>and</strong> the<br />
ability to h<strong>and</strong>le water containing particulates <strong>and</strong> solids.<br />
Product Support Promise<br />
Selling you a water management solution isn’t an<br />
AllightSykes goal. It’s our starting point.<br />
We underst<strong>and</strong> that you need to be able to rely on fast,<br />
fuss-free genuine parts <strong>and</strong> service <strong>and</strong> warranty backup<br />
long after your pump has started doing its job.<br />
That’s why our Product Support teams are on h<strong>and</strong> to<br />
make sure you can access qualified, professional <strong>and</strong><br />
highly skilled technicians when you need them most.<br />
2 ALLIGHTSYKES WATER<br />
Need to know more?<br />
As you work your way through the brochure, you’ll realise<br />
why our water management solutions are generally<br />
believed to be as good as it gets. But if brochures aren’t<br />
your thing, just mouse over to www.allightsykes.com .<br />
You’ll be able to get hold of relevant general information,<br />
spec sheets, interactive water calculators, news <strong>and</strong><br />
thought-leadership articles, <strong>and</strong> compliance <strong>and</strong><br />
legislation updates.<br />
Other world class br<strong>and</strong>s<br />
exclusive to AllightSykes<br />
The science of mobile lighting has sat at the heart of the<br />
Allight br<strong>and</strong> for more than 20 years. From worldwide<br />
headquarters in Perth, Western <strong>Australia</strong>, design,<br />
engineering, procurement <strong>and</strong> assembly teams produce<br />
almost 3,000 lighting towers a year for world markets.<br />
Prime or st<strong>and</strong>by power generating sets which come<br />
with an FG Wilson badge, also bring with them quality<br />
<strong>and</strong> performance assurances across a huge 6.8kVA to<br />
2200kVa range.<br />
As well as choosing Perkins to power our products,<br />
we’re also the only source of loose engines in <strong>Australia</strong>.<br />
The range includes both the Perkins <strong>and</strong> Perkins Marine<br />
Power line-up of clean, efficient engines ranging from 5 to<br />
over 2600HP.<br />
The latest addition to our suite of equipment solutions,<br />
Rotair’s range of compact <strong>and</strong> quiet motorized<br />
compressors are available in output configurations from<br />
74cfm to 424cfm.
Self Priming Systems<br />
Compressor Prime<br />
Involves passing a jet of compressed air through a venturi-type nozzle to evacuate the pump<br />
casing <strong>and</strong> suction line. It makes sure priming is fast, positive <strong>and</strong> continuous - even under<br />
snore conditions. The priming system has no moving parts. This greatly reduces maintenance<br />
requirements.<br />
System Features <strong>and</strong> Benefits<br />
Impeller<br />
Stainless steel 316 for optimum corrosion resistance. Two per cent<br />
chromium <strong>and</strong> CD4MCu available as options. Impellers are open<br />
to improve solids h<strong>and</strong>ling, <strong>and</strong> have back vanes <strong>and</strong> holes for<br />
pressure balancing.<br />
Venturi prime<br />
Simple design, easy to clean. Modular for easy parts replacement.<br />
The Venturi system requires very little maintenance, <strong>and</strong> so is easily<br />
serviced in the field.<br />
Volute<br />
Spheroidal graphite cast iron for superior strength compared to<br />
ductile <strong>and</strong> grey iron. This also helps prevent cracking in the metal.<br />
Wear plates<br />
316 stainless steel replacement front <strong>and</strong> rear wear plates.<br />
Chromium steel abrasion resistant <strong>and</strong> CD4MCU corrosion <strong>and</strong><br />
abrasion resistant steel are available options. Replaceable wear<br />
plate adjustment facility lowers operation <strong>and</strong> substitution costs.<br />
Discharge<br />
Flapper style check valve for deck<br />
discharge, or ball type for top<br />
discharge available.<br />
Compressor<br />
<strong>Water</strong> cooled compressors for lower<br />
running costs. This means a longer life <strong>and</strong> less<br />
maintenance of the compressor <strong>and</strong> Venturi priming system.<br />
Seal<br />
Oil bath mechanical seals allow dry running for extended periods.<br />
The oil bath dissipates the heat <strong>and</strong> lubricates the seal. Silicone<br />
carbide <strong>and</strong> tungsten carbide for the most effective head <strong>and</strong><br />
friction coefficient. Seal technology allows for higher pressures,<br />
which improves performance in flooded suction <strong>and</strong> series<br />
pumping. Seal elastomers include Buna N <strong>and</strong> Viton.<br />
Shaft<br />
431 stainless steel to help prevent rust or pitting on the shaft <strong>and</strong><br />
make seal changes faster <strong>and</strong> simpler.<br />
Vacuum Prime<br />
Features a vacuum priming chamber which dramatically reduces carry-over due to the stainless<br />
steel baffle deflector plates <strong>and</strong> pancake float. Ideal for wellpoint dewatering <strong>and</strong> long suction<br />
conditions.<br />
System Features <strong>and</strong> Benefits<br />
60cfm vacuum prime<br />
Ensures quick priming even in long suction conditions.<br />
Float type head gear<br />
Made from anti-corrosive materials.<br />
Over centre positive latches<br />
For easy access during servicing <strong>and</strong> maintenance.<br />
Volute<br />
Made from spheroidal graphite cast iron. Spheroidal graphite iron<br />
provides superior strength compared to ductile <strong>and</strong> grey iron.<br />
Impeller<br />
Stainless steel 316 for best corrosion resistance, CD4MCu, <strong>and</strong><br />
cast iron available as options. Impellers are open for best solids<br />
h<strong>and</strong>ling, <strong>and</strong> have back vanes <strong>and</strong> holes for pressure balancing.<br />
Discharge<br />
Flapper style check valve for deck discharge, or ball type for top<br />
discharge, available.<br />
Product descriptions <strong>and</strong> specifications are approximations only <strong>and</strong> are subject to change without notice.<br />
No reliance can be made on these approximations.<br />
Wear plates<br />
Replacement front <strong>and</strong> rear<br />
wear plates made from 316<br />
stainless steel. Chromium<br />
steel abrasive resistant <strong>and</strong><br />
CD4MCU corrosive <strong>and</strong> abrasive resistant<br />
steel are available options. Replaceable wear plates lower<br />
operation <strong>and</strong> substitution costs by allowing adjustment of the<br />
wear plates to maintain efficiencies.<br />
Oil reservoir <strong>and</strong> oil/air separator<br />
Fitted <strong>and</strong> an integral part of the vacumax chamber. The two<br />
stage oil separator reduces misting from the vacuum pump<br />
exhaust.<br />
Seal<br />
Oil bath mechanical seals allow dry running for extended periods.<br />
The oil bath dissipates the heat <strong>and</strong> lubricates the seal.<br />
Shaft<br />
Made from 431 stainless steel which means no rust or pitting on<br />
the shaft for easier seal changes.<br />
ALLIGHTSYKES WATER 3
Contractors<br />
Range<br />
Incorporating the new MH300i<br />
Designed to deliver market-leading fluid h<strong>and</strong>ling<br />
efficiencies while being sensitive to the environment.<br />
Contractors pumps are fully auto-priming <strong>and</strong> can run dry for extended periods without damage. This is made possible by a clever oil<br />
bath mechanical seal assembly which allows priming with long suction hoses <strong>and</strong> suction lifts of up to 9 metres (28 feet). As fluid levels<br />
fluctuate, the pump will ‘snore’ until sufficient liquid is available for the pump to fully reprime itself automatically.<br />
FEATURES<br />
Model<br />
Low fuel usage<br />
Reduced engine sizes<br />
Lower maintenance costs<br />
Dry self prime <strong>and</strong> reprime<br />
Suction lifts to 9m<br />
Operates in ‘snore’ conditions<br />
Conversion kits for wellpoint<br />
dewatering <strong>and</strong> high heads<br />
APPLICATIONS<br />
Construction<br />
Environmental<br />
Industrial<br />
Connections<br />
(mm/in)<br />
4 ALLIGHTSYKES WATER<br />
Mining<br />
Clean <strong>Water</strong><br />
Sludge<br />
Maximum<br />
Head<br />
(m/ft)<br />
Diesel, electric or hydraulic drive<br />
Solids h<strong>and</strong>ling up to 90mm<br />
Simple maintenance<br />
Replaceable wear parts<br />
Chassis<br />
- skid, road tow, wheeled, caged<br />
Zero emissions available<br />
Custom build available<br />
Maximum<br />
Suction<br />
(m/ft)<br />
Slimes<br />
Sewage<br />
Solids laden liquids<br />
Maximum Flow<br />
(Ltrs per sec/<br />
US Gallons per minute)<br />
TOTAL HEAD<br />
Solids<br />
H<strong>and</strong>ling<br />
(mm/in)<br />
Efficiency<br />
%<br />
FLOW – CLEAR WATER PERFORMANCE<br />
Approx Dimension<br />
(mm/in)<br />
CP80i 75x75/3x3 28.5/93 9/30 40/634 38/1.5 56 1960L x 900W x 1300H<br />
78L x 36W x 52H<br />
VMX80i 75x75/3x3 28.5/93 9/30 40/634 38/1.5 56 1960L x 900W x 1300H<br />
78L x 36W x 52H<br />
CP100i 100x100/4x4 54/177 9/30 67/1061 45/1.8 72 1960L x 900W x 1300H<br />
78L x 36W x 52H<br />
VMX100i 100x100/4x4 54/177 9/30 67/1061 45/1.8 72 1960L x 900W x 1300H<br />
78L x 36W x 52H<br />
HD100i 100x100/4x4 35/115 N/A 55/871 45/1.8 72 2260L x 1000W x 1715H<br />
89L x 40W x 68H<br />
CP150i 150x150/6x6 60/197 9/30 174/2756 77/3 81 2340L x 1250W x 1900H<br />
92L x 50W x 75H<br />
VMX150i 150x150/6x6 60/197 9/30 174/2756 77/3 81 2340L x 1250W x 1900H<br />
92L x 50W x 75H<br />
HD150i 150x150/6x6 40/131 N/A 120/1900 77/3 81 2420L x 1000W x 1815H<br />
96L x 40W x 72H<br />
CP150iC 150x150/6x6 44/144 9/30 163/2582 77/3 74 1960L x 900W x 1300H<br />
78L x 36W x 52H<br />
VMX150i 150x150/6x6 44/144 9/30 163/2582 77/3 74 1960L x 900W x 1300H<br />
78L x 36W x 52H<br />
HD150iC 150x150/6x6 23/75 N/A 120/1201 77/3 74 2260L x 1000W x 1815H<br />
89L x 40W x 73H<br />
CP220i 200x200/8x8 64/210 9/30 220/3485 80/3.2 78 2600L x 1520W x 2270H<br />
103L x 60W x 90H<br />
VMX220i 200x200/8x8 64/210 9/30 220/3485 80/3.2 78 2600L x 1520W x 2270H<br />
103L x 60W x 90H<br />
HD220i 200x200/8x8 38/125 N/A 180/2851 80/3.2 78 2600L x 1000W x 1815H<br />
103L x 40W x 72H<br />
CP300i 300x300/12x12 60/197 9/30 475/7524 90/3.6 80 5100L x 2200W x 2500H<br />
201L x 87W x 99H<br />
MH300 300x250/12x10 68/223 9/30 340/5386 75/3 56 4900L x 2000W x 3150H<br />
193L x 79W x 124H<br />
Approx Dry Weight<br />
(kg/lbs)<br />
840/1848<br />
940/2068<br />
850/1870<br />
950/2090<br />
1350/2970<br />
1540/3388<br />
1640/3608<br />
1500/3307<br />
1100/2420<br />
1200/2640<br />
1350/2970<br />
2370/5214<br />
2470/5434<br />
1700/3748<br />
6300/13860<br />
6100/13420
HIMAX<br />
Range<br />
Designed <strong>and</strong> built to meet particularly tough<br />
operating conditions.<br />
Himax pumps are the water management solution of choice<br />
throughout many of the world’s harshest mining <strong>and</strong> construction<br />
environments. Fully auto-priming <strong>and</strong> including high head pumping<br />
capability, they can also h<strong>and</strong>le solids up to 75mm.<br />
FEATURES<br />
Full automatic prime<br />
Operates in ‘snore’ conditions<br />
Diesel, electric or hydraulic drive<br />
Simple maintenance<br />
Replaceable wear parts<br />
Solids h<strong>and</strong>ling up to 75mm<br />
Pressure tested fuel tanks<br />
High ground clearance on skids<br />
Bisalloy wear strips (optional)<br />
Interchangeable parts<br />
APPLICATIONS<br />
Model<br />
Mining<br />
Quarries<br />
Industrial<br />
Connections<br />
(mm/in)<br />
Pipelines<br />
Jetting<br />
Maximum<br />
Head<br />
(m/ft)<br />
Engine protection as st<strong>and</strong>ard<br />
Suction booms (optional)<br />
Suction lifts to 9m<br />
Chassis<br />
- skid, road tow, wheeled, caged<br />
Zero emissions available<br />
Custom builds available<br />
Maximum<br />
Suction<br />
(m/ft)<br />
Drilling<br />
Construction<br />
Maximum Flow<br />
(Ltrs per sec/<br />
US Gallons per minute)<br />
TOTAL HEAD<br />
Solids<br />
H<strong>and</strong>ling<br />
(mm/in)<br />
HH80 75x75/3x3 105/344 9/30 28/444 25/1<br />
HH100 150x100/6x4 130/426 9/30 56/887 29/1.14 (solids)<br />
HH125 150x150/6x6 130/426 9/30 56/887 29/1.14 (solids)<br />
HH150 200x150/8x6 99/325 9/30 150/2376 38/1.51<br />
HH160i 200x150/8x6 140/459 9/30 186/2946 38/1.5<br />
HH220i 200x200/8x8 138/453 9/30 282/4467 55/2.2<br />
FBP300 300x300/12x12 1140/460 9/30 340/5386 75/3<br />
FLOW – CLEAR WATER PERFORMANCE<br />
Approx Dimension<br />
(mm/in)<br />
2340L x 1250W x 1900H<br />
92L x 50W x 75H<br />
3000L x 1250W x 1870H<br />
118L x 50W x 75H<br />
3500L x 1520W x 2250H<br />
138L x 60W x 89H<br />
4500L x 1620W x 2400H<br />
178L x 64W x 95H<br />
4500L x 1800W x 2700H<br />
177L x 71W x 106W<br />
4900L x 2000W x 3150H<br />
193L x 79W x 124H<br />
7000L x 2300W x 3200H<br />
276L x 91W x 126H<br />
Approx Dry Weight<br />
(kgs/lbs)<br />
1540/3388<br />
2920/6424<br />
2920/6424<br />
3700/8140<br />
4000/8800<br />
7600/16720<br />
12000/26400<br />
ALLIGHTSYKES WATER 5
Xtra Pump<br />
Range<br />
Built for mining <strong>and</strong> able to operate unattended<br />
at high discharge heads.<br />
Xtra pumps come with increased shaft stiffness ratios so that they can<br />
withst<strong>and</strong> particularly high pressures <strong>and</strong> loads without any threat of<br />
compromise to the seal integrity through shaft flexing.<br />
FEATURES<br />
Model<br />
Pumps prime automatically<br />
316 stainless steel pump<br />
internals as st<strong>and</strong>ard<br />
Simple to service<br />
Run dry without damage<br />
APPLICATIONS<br />
Mining<br />
Quarries<br />
Industrial<br />
Connections<br />
(mm/in)<br />
Maximum<br />
Head<br />
(m/ft)<br />
Maximum<br />
Suction<br />
(m/ft)<br />
Maximum Flow<br />
(Ltrs per sec/<br />
US Gallons per minute)<br />
XH80 80x80/3.2x3.2 247/810 9/30 28/444<br />
Solids<br />
H<strong>and</strong>ling<br />
(mm/in)<br />
18/0.71<br />
(solids)<br />
XH100 150x100/6x4 185/607 9/30 82/1299 22/0.88<br />
XH150 200x150/8x6 185/607 9/30 150/2376 43/1.7<br />
6 ALLIGHTSYKES WATER<br />
Pipelines<br />
Jetting<br />
Solids h<strong>and</strong>ling<br />
Direct drive<br />
Operational chart fitted<br />
Adjustable <strong>and</strong> replaceable<br />
wear plates<br />
Drilling<br />
Construction<br />
TOTAL HEAD<br />
FLOW – CLEAR WATER PERFORMANCE<br />
Approx Dimension<br />
(mm/in)<br />
4500L x 1620W x 2250H<br />
180L x 64W x 90H<br />
4750L x 1820W x 2700H<br />
187L x 72W x 106H<br />
5200L x 2150W x 3050H<br />
205L x 85W x 120H<br />
Approx Dry Weight<br />
(kgs/lbs)<br />
3900/8580<br />
5560/12232<br />
6850/15070
QS<br />
Range<br />
A whisper quiet range of pumps designed for urban<br />
<strong>and</strong> other project sites where noise can be a problem.<br />
Priming<br />
QS pumps are available with either Compressor Prime or<br />
‘VACUMAX’ Vacuum Prime systems.<br />
Both systems are fully automatic <strong>and</strong> interchangeable <strong>and</strong> the<br />
canopy design is unaffected by the choice of priming system.<br />
Noise .<br />
QS pumps have been designed to comply with noise output<br />
regulations governing worksites <strong>and</strong> urban areas.<br />
Available as either basic QS or super sound-proofed SQS variants,<br />
maximum noise output is 62 dBA at seven metres when operating<br />
at full load.<br />
Maintenance<br />
Large lockable access doors have been designed with fast routine<br />
maintenance in mind. External drain plugs are fitted for fuel, oil <strong>and</strong><br />
water. The skid base fuel tank can be easily drained <strong>and</strong> flushed<br />
Model Connections<br />
(mm/in)<br />
Maximum<br />
Head<br />
(m/ft)<br />
Maximum<br />
Suction<br />
(m/ft)<br />
Maximum Flow<br />
(Ltrs per sec/<br />
US Gallons per minute)<br />
out if necessary, <strong>and</strong> the entire canopy can be quickly removed<br />
for major maintenance.<br />
Options<br />
QS pumps are available with either VACUMAX or Compressor<br />
Prime systems, <strong>and</strong> with a range of diesel power options.<br />
Skid Based<br />
QS pump sets can be fixed to a common skid base which<br />
incorporates a 24 hour (minimum) fuel tank <strong>and</strong> bunded area.<br />
Mobile<br />
QS pumps can be bolted onto a twin axle galvanised trailer.<br />
If appropriate, the trailer system can be fitted with hose racks<br />
to store 10 lengths of suction hose, <strong>and</strong> 100 metres of layflat<br />
discharge hose.<br />
Solids<br />
H<strong>and</strong>ling<br />
(mm/in)<br />
QSCP80i 75x75/3x3 28.5/93 9/30 40/634 38/1.5<br />
QSVMX80i 75x75/3x3 28.5/93 9/30 40/634 38/1.5<br />
QSCP100i 100x100/4x4 54/177 9/30 67/1061 45/1.8<br />
QSVMX100i 100x100/4x4 54/177 9/30 67/1061 45/1.8<br />
QSCP150i 150x150/6x6 60/197 9/30 174/2756 77/3<br />
QSVMX150i 150x150/6x6 60/197 9/30 174/2756 77/3<br />
QSCP220i 200x200/8x8 64/210 9/30 220/3485 80/3.2<br />
QSVMX220i 200x200/8x8 64/210 9/30 220/3485 80/3.2<br />
QSCP300i 300x300/12x12 60/197 9/30 475/7524 90/3.6<br />
Approx Dimension<br />
(mm/in)<br />
2500L x 1100W x 1900H<br />
98L x 43W x 75H<br />
2500L x 1100W x 1900H<br />
98L x 43W x 75H<br />
2500L x 1100W x 1900H<br />
98L x 43W x 75H<br />
2500L x 1100W x 1900H<br />
98L x 43W x 75H<br />
2850L x 1100W x 1900H<br />
110L x 43W x 75H<br />
2850L x 1100W x 1900H<br />
110L x 43W x 75H<br />
2850L x 1100W x 1900H<br />
110L x 43W x 75H<br />
2850L x 1100W x 1900H<br />
110L x 43W x 75H<br />
5000L x 2000W x 2300H<br />
197L x 79W x 91H<br />
Approx Dry<br />
Weight<br />
(kgs/lbs)<br />
2100/4620<br />
2400/5280<br />
2100/4620<br />
2400/5280<br />
2200/4840<br />
2500/5500<br />
2400/5280<br />
2700/5940<br />
8500/18700<br />
ALLIGHTSYKES WATER 7
Yakka<br />
Range<br />
Widely considered to be the world’s most versatile<br />
pump. Designed to suit the requirements of almost any<br />
three, four or six inch pump application. Ideal for mining,<br />
construction, sewer bypass <strong>and</strong> rental.<br />
As well as being versatile, the Yakka pump is also very quiet. Acoustic<br />
casing enables it to emit only 65dBA at seven metres when operating at<br />
1500rpm, <strong>and</strong> 67.5dBA at 1800rpm.<br />
TOTAL HEAD<br />
FEATURES<br />
Robust<br />
‘QS’ silent canopy design<br />
Impact resistant polyethylene panels,<br />
easily removed for maintenance<br />
Tubular steel side/end protection<br />
Lockable gull wing doors for easy<br />
access<br />
Fuel tank ‘bunding’<br />
Quality accreditation AS9002<br />
Model<br />
Connections<br />
(mm/in)<br />
8 ALLIGHTSYKES WATER<br />
Maximum<br />
Head<br />
(m/ft)<br />
Maximum<br />
Suction<br />
(m/ft)<br />
Compact<br />
Lightweight in design<br />
30 hour fuel tank<br />
‘Pod’ can be mounted on any trailer or<br />
sled<br />
Able to be mounted on a single axle<br />
trailer for improved maneuverability<br />
Single point lift<br />
Maximum Flow<br />
(Ltrs per sec/<br />
US Gallons per minute)<br />
Solids<br />
H<strong>and</strong>ling<br />
(mm/in)<br />
YAKKA80HH 75x75/3x3 67/220 9/30 28/444 25/1<br />
YAKKA100 100x100/4x4 37/122 9/30 67/1062 45/1.8<br />
YAKKA150 150x150/6x6 29/96 9/30 132/2091 77/3<br />
YAKKA<br />
HH80<br />
YAKKA<br />
CP100<br />
YAKKA<br />
CP150<br />
FLOW – CLEAR WATER PERFORMANCE<br />
Efficient<br />
High performance pump ends<br />
Increased flows<br />
Reduced fuel usage<br />
Solids h<strong>and</strong>ling<br />
Stainless steel impeller <strong>and</strong> wearplates<br />
as st<strong>and</strong>ard<br />
Approx Dimension<br />
(mm/in)<br />
2250L x 1100W x 1375H<br />
89L x 44W x 55H<br />
2250L x 1100W x 1375H<br />
89L x 44W x 55H<br />
2250L x 1100W x 1375H<br />
89L x 44W x 55H<br />
Approx Dry Weight<br />
(kgs/lbs)<br />
1325/2915<br />
1325/2915<br />
1325/2915
Pelican Dredge<br />
Designed <strong>and</strong> manufactured by Sykes specifically to meet the<br />
challenges of shallow water dredging.<br />
FEATURES<br />
One man operation<br />
Self contained <strong>and</strong> self<br />
propelled<br />
Can operate in less than one<br />
metre of water<br />
St<strong>and</strong>ard dredge will excavate<br />
to 4.5m deep<br />
APPLICATIONS<br />
Clearing out settlement <strong>and</strong><br />
tailings ponds on mine sites<br />
Recovering river s<strong>and</strong>s <strong>and</strong><br />
gravels<br />
Clearing silt from industrial <strong>and</strong><br />
municipal waste ponds<br />
Diesel powered<br />
Optimum maneuverability<br />
Easily transportable<br />
Lightweight – less than 6 tonnes<br />
H<strong>and</strong>les solids to 60mm<br />
Dredging irrigation channels<br />
<strong>and</strong> marinas<br />
Clearing weeds <strong>and</strong> similar<br />
growth from waterways <strong>and</strong><br />
marinas<br />
ALLIGHTSYKES WATER 9
Dragflow Pumps<br />
Also available exclusively throughout <strong>Australia</strong> <strong>and</strong> <strong>New</strong> Zeal<strong>and</strong> from AllightSykes, the Dragflow<br />
agitator slurry pump is designed to move dense slurries. Unlike most competitive pumps, it is able to<br />
pick up solids from rest, mix them into a high density slurry <strong>and</strong> then pump them – all in one operation.<br />
The clever design of the pump’s agitator holds the key to<br />
its ability to pick up material from rest. It also enables the<br />
pump to h<strong>and</strong>le fast settling, high specific gravity solids<br />
<strong>and</strong> viscous thixotropic mud.<br />
It works by creating a ‘down pressure’ which stirs up<br />
material below the pump’s suction.<br />
The pressure differential (suction of pump versus<br />
down pressure of agitator) which is created mixes <strong>and</strong><br />
homogenizes the stirred up material.<br />
10 ALLIGHTSYKES WATER<br />
The mixed <strong>and</strong> homogenized slurry is then drawn back into<br />
the suction as a highly concentrated, uniform slurry.<br />
Material too large to enter the pump’s suction (screen) is<br />
repelled so that it cannot plug the suction screen.
Grindex Pumps<br />
Grindex submersible pumps have been the water management solutions of choice across <strong>Australia</strong><br />
<strong>and</strong> <strong>New</strong> Zeal<strong>and</strong> for more than four decades. Durable high performers, the range of drainage <strong>and</strong><br />
sludge pumps owes its success to clever design features, ease of maintenance <strong>and</strong> the ability to<br />
h<strong>and</strong>le water containing particulates <strong>and</strong> solids.<br />
Grindex Drainage Pumps are ideal for pumping:<br />
• water which may contain abrasive particles – up to<br />
the size of the strainer holes.<br />
• ground water.<br />
• raw water.<br />
Grindex Sludge Pumps are ideal for pumping:<br />
• water with a high solid content up to the size of the<br />
pump inlet opening diameter.<br />
• water which contains abrasive particles.<br />
• different types of mud <strong>and</strong> sludge.<br />
• light slurry.<br />
We also distribute the Grindex range of Tuff Pumps which<br />
are designed for professional drainage pumping projects<br />
which dem<strong>and</strong> higher than usual levels of durability.<br />
Being relatively light, these pumps are also portable. As an<br />
added bonus, they are equipped with stable <strong>and</strong> use-togrip<br />
carrying h<strong>and</strong>les.<br />
ALLIGHTSYKES WATER 11
12 ALLIGHTSYKES WATER<br />
Trim-Well<br />
If you need to manage <strong>and</strong> move ground<br />
water in dem<strong>and</strong>ing construction<br />
environments, we can use our 40 years<br />
of experience to devise <strong>and</strong> deliver a<br />
customised wellpoint dewatering solution<br />
for you.<br />
Whether you need vacuum priming or submersible<br />
pumps - or a hybrid featuring more than one<br />
technology, our solutions can feature pumps ranging<br />
from two to 26 inches in diameter.<br />
Our Trim-Well wellpoint dewatering technology is<br />
lightweight <strong>and</strong> corrosion resistant <strong>and</strong> incorporates<br />
control valves to trim <strong>and</strong> control the dewatering<br />
process.<br />
• Wellpoint ‘Spears’ – various sizes available,<br />
lightweight <strong>and</strong> easy to install<br />
• Flexbows – reusable three piece pushfit valve<br />
system means simple connection without<br />
special tools<br />
• Hedder Pipe – lightweight with simple clean<br />
holes<br />
• Hedder Couplings
Hoses, Couplings<br />
& Strainers<br />
The wide range of water management challenges dem<strong>and</strong>s an equally versatile <strong>and</strong> durable range<br />
of accessories. Sykes hoses <strong>and</strong> fittings are made to conform to the rigorous st<strong>and</strong>ards set by our<br />
world class Engineering Department. They are available from our network of branches <strong>and</strong> worldwide<br />
distributors.<br />
• Hose Couplings (Bauer type) – Strong <strong>and</strong> reliable<br />
• Strainers – Split intake <strong>and</strong> general purpose strainers<br />
ensure no large solids are drawn in to the pump, <strong>and</strong><br />
so limit the likelihood of damage. Lightweight <strong>and</strong><br />
easy to use, the strainers are fitted onto flanged or<br />
bauer hose tails.<br />
• Reinforced PVC Heavy Duty Layflat Hose –<br />
Reinforced with an embedded nylon web. Can be<br />
coiled for easy storage <strong>and</strong> transportation.<br />
• Wire Armoured Suction Hose – A tough, durable hose<br />
which will st<strong>and</strong> up to the most harsh site conditions.<br />
Suitable for both suction <strong>and</strong> discharge lines.<br />
• Galvanised Steel Pipe – Made from high quality, spiral<br />
welded, hot dipped galvanized steel <strong>and</strong> fitted with<br />
quick release couplings. The robust, maintenancefree<br />
pipe is suitable for discharge lines.<br />
ALLIGHTSYKES WATER 13
Parts <strong>and</strong><br />
Product Support<br />
Parts<br />
Fast turnaround from Customer Service teams ready to meet<br />
your needs 24/7.<br />
Support<br />
Selling you a water management solution isn’t an AllightSykes<br />
goal. It’s our starting point.<br />
We underst<strong>and</strong> that you need to be able to rely on fast, fussfree<br />
service <strong>and</strong> warranty back-up long after your pump has<br />
started doing its job.<br />
Quality<br />
Sykes is a Quality Endorsed company with our quality<br />
management system accredited to ISO 9001-2008. Our<br />
preferred suppliers are also quality accredited.<br />
Our established quality control program ensures that<br />
That’s why our Product Support teams are on h<strong>and</strong> to make<br />
sure you can access qualified, professional <strong>and</strong> highly skilled<br />
technicians when you need them most – whether you need a<br />
simple seal <strong>and</strong> bearing change or a complete pump overhaul.<br />
All service technicians have an intimate knowledge of our<br />
pumping equipment.<br />
For added peace of mind, experienced technicians can visit<br />
your site to make sure your pump is set up correctly <strong>and</strong><br />
running with maximum efficiency. This preventative measure<br />
will help to reduce unnecessary wear <strong>and</strong> tear on the pump<br />
<strong>and</strong> help prevent unforeseen <strong>and</strong> costly downtime.<br />
products are thoroughly inspected <strong>and</strong> tested before final<br />
installation <strong>and</strong> commissioning.<br />
Quality control testing is done on site by our experts on our<br />
certified test facility.<br />
Engineering, Research<br />
& Production<br />
Engineering<br />
Our engineers are based at our manufacturing facility in<br />
Cardiff, NSW. They are the driving force behind our worldbeating<br />
technology, <strong>and</strong> work with major mining <strong>and</strong><br />
construction clients around the world to devise solutions to<br />
water management challenges.<br />
As well as keeping our products at the cutting edge of<br />
technology, all their work is designed to ensure that our<br />
products comply with ISO 9001-2008 quality st<strong>and</strong>ards.<br />
14 ALLIGHTSYKES WATER<br />
Research <strong>and</strong> Development<br />
We underst<strong>and</strong> that your water management project needs<br />
to run as efficiently <strong>and</strong> cost-effectively as possible. We also<br />
realise that means a continuous investment for us in research<br />
<strong>and</strong> development. As well as closely monitoring worldwide<br />
trends so that we can stay ahead of the innovation curve, our<br />
R&D teams welcome any opportunity to work directly with you<br />
on specific challenges.<br />
Manufacturing<br />
We make our pumps in <strong>Australia</strong> <strong>and</strong> Dubai – <strong>and</strong> both our<br />
manufacturing facilities are accredited to ISO 9001-2008.
Disclaimer:<br />
Product descriptions <strong>and</strong> specifications contained in this publication are<br />
approximations only <strong>and</strong> are subject to change without notice. No reliance<br />
can be made on these approximations.<br />
ALLIGHTSYKES WATER 15
ADELAIDE, AUSTRALIA<br />
585 South Road<br />
Regency Park SA 5010<br />
T +61 (0)8 8243 4162<br />
F +61 (0)8 8345 1623<br />
E info@allightsykes.com<br />
BRISBANE, AUSTRALIA<br />
35 Alex<strong>and</strong>ria Place<br />
MURARRIE QLD 4172<br />
T +61 (0)7 3131 8222<br />
F +61 (0)7 3348 8613<br />
E info@allightsykes.com<br />
MELBOURNE, AUSTRALIA<br />
145-157 Fairbank Road<br />
CLAYTON VIC 3169<br />
T +61 (0)3 9271 3301<br />
F +61 (0)3 9271 3310<br />
E info@allightsykes.com<br />
NEWCASTLE, AUSTRALIA<br />
42 Munibung Road<br />
CARDIFF NSW 2285<br />
T +61 (0)2 4954 3333<br />
F +61 (0)2 4954 3303<br />
E info@allightsykes.com<br />
PERTH, AUSTRALIA<br />
12 Hoskins Road<br />
LANDSDALE WA 6065<br />
T +61 (0)8 9302 7000<br />
F +61 (0)8 9302 7001<br />
E info@allightsykes.com<br />
ROCKHAMPTON, AUSTRALIA<br />
51 Johnson Street<br />
ROCKHAMPTON QLD 4701<br />
T +61 (0)7 4936 2888<br />
F +61 (0)7 4936 2444<br />
E info@allightsykes.com<br />
SYDNEY, AUSTRALIA<br />
41 York Road<br />
INGLEBURN NSW 2565<br />
T +61 (0)2 9765 6800<br />
F +61 (0)2 9765 6899<br />
E info@allightsykes.com<br />
TOWNSVILLE, AUSTRALIA<br />
M +61 (0)427 543 338<br />
E info@allightsykes.com<br />
AUCKLAND, NEW ZEALAND<br />
13 McLaughlins Road<br />
MANUKAU CITY 2104<br />
T +64 9 278 8300<br />
F +64 9 278 8700<br />
E info@allightsykes.com<br />
CHRISTCHURCH, NEW ZEALAND<br />
4 Chinook Place<br />
HORNBY<br />
T +64 3 344 2100<br />
F +64 3 344 2122<br />
E info@allightsykes.com<br />
AS0001P