TECHNICAL RULES MOTOCROSS (INCLUDING RULES FOR ... - FIM

82.01 Introduction
Snowmobiles are vehicles driven on one or more caterpillar tracks steered by skis
generally situated at the front or side of the vehicle either permanently or temporarily
attached. There are several types of snowmobiles.
82.01.1 Snowmobiles equipped with 2 caterpillar tracks with one or two steering
skis in front of the vehicle.
82.01.2 Snowmobiles equipped with one caterpillar track with one or two
steering skis in front.
82.01.3 Snowmobiles equipped with one caterpillar track and skis.
For safety reasons, no windscreen of plastic or similar material shall be used.
82.02 General Specifications
82.02.1 The position of the engine is optional, except that it must be positioned
in front of the rider.
82.02.2 The rider must be completely visible.
82.02.3 It is forbidden to add air foils or spoilers to the original hood or cowling.
82.02.4 The use of Titanium is strictly forbidden.
82.02.5 The rear tunnel opening must be enclosed with a comparable tunnel
material.
82.02.6 Front headlights(s) must be removed or covered.
82.02.7 Machines must be equipped with red rear lamp, minimum power 20 W.
Minimum dimensions of rear lamp: 40 mm x 50 mm.
82.02.8 It is forbidden to drive on the track without hood or cowling.
82.03 Starting devices
Snowmobiles must be equipped with an on-board mounted starting device.
The stand (support) used to lift the vehicle when on hold behind the start gate
can be used for the sound control.
82.04 Open transmission guards
Snowmobiles must be equipped with belt guards. The guards must be separate from
the cowl configuration.
82.05 Exhaust pipes
51