Section 6: Material modelling in solid mechanics - GAMM 2012

Section 6: Material modelling in solid mechanics 1
Section 6: Material modelling in solid mechanics
Organizers: Daniel Balzani (Universität Duisburg-Essen), Wolfgang Dreyer (WIAS Berlin)
S6.1: Microstructures in Elasto-Plasticity I Tue, 13:30–15:30
Chair: Thorsten Bartel S1|01–A03
13:30 – 13:50: Mehdi Goodarzi, Klaus Hackl (Universität Bochum): A model for martensitic
microstructure, its geometry and interface effects
Abstract
13:50 – 14:10: S. Mauthe, F. Hildebrand, C. Miehe (Universität Stuttgart): A Formulation of
Finite Gradient Crystal Plasticity with Systematic Separation of Long- and Short-
Range States
Abstract
14:10 – 14:30: Stephan Wulfinghoff, Thomas Böhlke (KIT): Numerical Implementation of a
Three-Dimensional Continuum Dislocation Microplasticity Theory
Abstract
14:30 – 14:50: Sebastian Heinz (WIAS Berlin): Rigorous derivation of a dissipation for laminate
microstructures
Abstract
14:50 – 15:10: Baodong Shi (Helmholtz-Zentrum Geesthacht), Jörn Mosler (Helmholtz-
Zentrum Geesthacht, TU Dortmund): Thermodynamically and variationally consistent
modeling of distortional hardening: application to magnesium
Abstract
15:10 – 15:30: Christina Günther, Klaus Hackl (Universität Bochum): A viscosity-limit approach
to the evolution of microstructures in finite plasticity
Abstract
S6.2: Polymers and Elastomers I Tue, 13:30–15:30
Chair: Mikhail Itskov, Vladimir Kolupaev S1|01–A1
13:30 – 14:10: Alexander Lion, Michael Johlitz (Universität der Bundeswehr München): Constitutive
modelling of chemical ageing
Abstract
14:10 – 14:30: Nico Hempel, Markus Böl (TU Braunschweig): Multi-phase modeling of shape
memory polymers
Abstract
14:30 – 14:50: Aycan Özlem Aydin, Rasa Kazakevičiute-Makovska , Holger Steeb (Universität
Bochum): On response functions in linear thermoelastic models of shape memory
polymers
Abstract

2 Section 6: Material modelling in solid mechanics
14:50 – 15:10: Philipp Hempel, Thomas Seelig (KIT): Modeling the finite strain deformation
and initial anisotropy of amorphous thermoplastic polymers
Abstract
15:10 – 15:30: Ismail Caylak, Rolf Mahnken (Universität Paderborn): Modeling of induced anisotropy
at large deformations for polymers
Abstract
S6.3: Microstructures in Elasto-Plasticity II Tue, 16:00–18:00
Chair: Dennis Kochmann, Sebastian Heinz S1|01–A03
16:00 – 16:20: Muhammad Sabeel Khan, Klaus Hackl (Universität Bochum): Microstructure
development in a Cosserat continuum as a consequence of energy relaxation
Abstract
16:20 – 16:40: Eva Lehmann, Stefan Loehnert, Peter Wriggers (Universität Hannover): About
the Microstructural Effects of Polycrystalline Materials and their Macroscopic Representation
at Finite Deformation
Abstract
16:40 – 17:00: A.V. Shutov, J. Ihlemann (TU Chemnitz): A rheological model for arbitrary
symmetric distortion of the yield surface
Abstract
17:00 – 17:20: Raphael Holtermann (TU Dortmund), Andreas Menzel (TU Dortmund / Lund
University): Towards the simulation of Internal Traverse Grinding – from mesoscale
modelling to process simulations
Abstract
17:20 – 17:40: Mubeen Shahid, Klaus Hackl (Universität Bochum): Multiscale crystal plasticity
based on continuum theory of dislocation mechanics: an extension to ductile
fracture.
Abstract
17:40 – 18:00: Richard Lohkamp, Ralf Müller (TU Kaiserslautern): Multiscale modelling and
simulation of micro machining of titan
Abstract
S6.4: Polymers and Elastomers II Tue, 16:00–18:00
Chair: Alexander Lion, Joachim Schmitt S1|01–A1
16:00 – 16:20: Mikhail Itskov, Roozbeh Dargazany, Karl Hörnes (RWTH Aachen): How to
approximate the inverse Langevin function?
Abstract
16:20 – 16:40: Sebastian Borsch, Albrecht Bertram (Universität Magdeburg): Phenomenological
modeling of a polymeric composite
Abstract

Section 6: Material modelling in solid mechanics 3
16:40 – 17:00: Zhaoyu Chen, Stefan Diebels (Universität des Saarlandes): Modelling of nanoindentation
of polymers with effects of surface roughness and parameters identification
Abstract
17:00 – 17:20: Ronny Behnke, Michael Kaliske (TU Dresden): Material force computation for
the thermo-mechanical response of dynamically loaded elastomers
Abstract
17:20 – 17:40: Alexander Bartels ∗ , Sandra Klinge ∗ , Klaus Hackl ∗ , Paul Steinmann ∗∗ (Universität
Bochum, Universität Erlangen-Nürnberg): Single and multiscale aspects of
the modeling of curing polymers
Abstract
17:40 – 18:00: Roozbeh Dargazany, Ngoc Khiêm Vu , Mikhail Itskov (RWTH Aachen): Influence
of nano-particle interactions on the mechanical behavior of colloidal structures
in polymeric solutions
Abstract
S6.5: Phase Transformations I Wed, 13:30–15:30
Chair: Markus Lazar, Wolfgang Dreyer S1|01–A03
13:30 – 14:10: Thorsten Bartel, Andreas Menzel (TU Dortmund): A thermodynamically consistent
framework for martensitic phase transformations interacting with plasticity
Abstract
14:10 – 14:30: Tim Dally, Kerstin Weinberg (Universität Siegen): Deformation induced martensite
transformation in a cold-worked forming process of austenitic stainless steel
Abstract
14:30 – 14:50: A. Schneidt, R. Mahnken (Universität Paderborn), T. Antretter (Montanuniversität
Leoben): Micromechanical modeling of bainitic phase transformation
Abstract
14:50 – 15:10: Reza Kebriaei, Jan Frischkorn, Stefanie Reese (RWTH Aachen): Effects of heat
treatment on phase transformation in powder metallurgical multi-functional coating
Abstract
15:10 – 15:30: Richard Ostwald, Thorsten Bartel (TU Dortmund), Andreas Menzel (U Dortmund
/ Lund University): Simulation of phase-transformations based on numerical
minimization of intersecting Gibbs energy potentials
Abstract
S6.6: Elasticity, Viscoelasticity, -plasticity I Wed, 13:30–15:30
Chair: Merab Svanadze, Daniel Balzani S1|01–A1
13:30 – 13:50: Christoph Bröcker, Anton Matzenmiller (Universität Kassel): Thermoviscoplasticity
deduced from enhanced rheological models
Abstract

4 Section 6: Material modelling in solid mechanics
13:50 – 14:10: Maia M. Svanadze (Universität Göttingen): Steady vibrations problems in the
theory of viscoelasticity for Kelvin-Voigt materials with voids
Abstract
14:10 – 14:30: D. Wollscheid, A. Lion (Universität der Bundeswehr München): Modelling of
predeformation- and frequency-dependent material behavior of filled rubber under
large predeformations superimposed with harmonic deformations of small amplitudes
Abstract
14:30 – 14:50: Thorsten Schüler, Ralf Jänicke, Holger Steeb (Universität Bochum): A multiscale
modelling approach for bituminous asphalt
Abstract
14:50 – 15:10: S.A.Agafonov (Moscow State Technical University), D.V.Georgievskii (Moscow
State University): Jumps of the critical tracking loadings for viscoelastic beams with
vanisihing internal viscosity
Abstract
15:10 – 15:30: Wolfgang H. Müller, B. Emek Abali (TU Berlin): Numerical modeling of a nonlinear
viscous flow in order to determine how parameters in constitutive relations
influence the entropy production
Abstract
S6.7: Phase Transformations II Wed, 16:00–18:00
Chair: Wolfgang Dreyer S1|01–A03
16:00 – 16:40: Markus Lazar (TU Darmstadt): Nonsingular Dislocation Loops in Gradient Elasticity
Abstract
16:40 – 17:00: Clemens Guhlke, Wolfgang Dreyer (WIAS Berlin): On a paradox within the
phase field modeling of storage systems and its resolution
Abstract
17:00 – 17:20: Uli Sack, Carsten Gräser, Ralf Kornhuber (FU Berlin): Numerical Simulation of
Coarsening in Metallic Alloys
Abstract
17:20 – 17:40: Regina Schmitt, Ralf Müller, Charlotte Kuhn (TU Kaiserslautern): A Phase
Field Model for Martensitc Transformations
Abstract
17:40 – 18:00: M. Ievdokymov, H. Altenbach, V.A. Eremeyev (Universität Magdeburg): Investigation
of the strain localization behavior with application of the phase transition
approach
Abstract

Section 6: Material modelling in solid mechanics 5
S6.8: Elasticity, Viscoelasticity, -plasticity II Wed, 16:00–18:00
Chair: Ismail Caylak S1|01–A1
16:00 – 16:20: Lisa Schänzel, Christian Miehe (Universität Stuttgart): A New Continuum Approach
to the Coupling of Shear Yielding and Crazing with Fracture in Glassy
Polymers
Abstract
16:20 – 16:40: Raad Al-Kinani, Kaveh Talebam, Stefan Hartmann (TU Clausthal): Anisotropic
finite strain hyperelasticity based on the multiplicative decomposition of the
deformation gradient
Abstract
16:40 – 17:00: B. Brylka, T. Böhlke (KIT): Experimental characterization of the viscoelastic
behaviour of discontinuous glass fibre reinforced thermoplastics
Abstract
17:00 – 17:20: J.-W. Simon, B. Stier, S. Reese (RWTH Aachen): A solid-shell finite element
for fibre reinforced composites
Abstract
17:20 – 17:40: Mokarram Hossain, Paul Steinmann (Universität Erlangen-Nürnberg): On consistent
tangent operator derivation and comparative study of rubber-like material
models at finite strains
Abstract
17:40 – 18:00: Steffen Rothe, Stefan Hartmann (TU Clausthal): Accelerating constitutive modeling
by automatic tangent generation
Abstract
S6.9: Microheterogeneous Materials Thu, 13:30–15:30
Chair: Johannes Schnepp, Eleni Agiasofitou S1|01–A03
13:30 – 14:10: Merab Svanadze (Ilia State University, Tbilisi): The boundary value problems
of the full coupled theory of poroelasticity for materials with double porosity
Abstract
14:10 – 14:30: Tobias Waffenschmidt (TU Dortmund), Andreas Menzel (TU Dortmund /
Lund University): Application of an anisotropic growth and remodelling formulation
to computational topology optimisation
Abstract
14:30 – 14:50: Sergey Lurie (Institute of Applied Mechanics, RAS), Natalia Tuchkova (Dorodnicyn
Computing Centre, RAS), Juri Soliaev (Institute of Applied Mechanics,
RAS): Amplification damping properties of multiphase composites with spherical
and fibers inclusions
Abstract

6 Section 6: Material modelling in solid mechanics
14:50 – 15:10: Michał Majzner, Andrzej Baier (Silesian University of Technology): Modeling of
composite structural elements made from aramid fiber using the method of features
objects
Abstract
15:10 – 15:30: Piotr Ostrowski (Technical University of Lodz): On the fibres shape effect for
non-linear and unidirectional stationary heat conduction in two-phase hollow cylinder
with radially graded material properties
Abstract
S6.10: Elasticity, Viscoelasticity, -plasticity III Thu, 13:30–15:30
Chair: Daniel Balzani S1|01–A1
13:30 – 13:50: Vu Ngoc Khiêm, Roozbeh Dargazany, Mikhail Itskov (RWTH Aachen): Network
evolution model: thermodynamics consistency, parameter identification and finite
element implementation
Abstract
13:50 – 14:10: Min Chen, A. Hachemi, D. Weichert (RWTH Aachen): Shakedown analysis of
periodic composites with kinematic hardening material model
Abstract
14:10 – 14:30: Andreas Kutschke, Konstantin Naumenko, Holm Altenbach (Universität Magdeburg):
Theory of mixture based material modeling - An inelastic material model
for a 12%-chromium steel
Abstract
14:30 – 14:50: Joachim Schmitt, Stefan Diebels (Universität des Saarlandes): Zur Abtragssimulation
beim Strömungsschleifen (AFM)
Abstract
14:50 – 15:10: Stephan Krämer, Steffen Rothe, Stefan Hartmann (TU Clausthal): Material
parameter identification using model reduction to uniaxial tensile tests
Abstract
15:10 – 15:30: Vladimir A. Kolupaev (DKI Darmstadt), Holm Altenbach (Universität Magdeburg):
Systematic representation of the yield criteria for isotropic materials
Abstract
S6.11: Special Methods in Material Modeling Thu, 16:00–18:00
Chair: Bernhard Eidel, Markus Scholle S1|01–A03
16:00 – 16:20: Oliver Eberhardt, Thomas Wallmersperger (TU Dresden): Modeling of Carbon
Nanotubes by Molecular Mechanics
Abstract
16:20 – 16:40: Eleni Agiasofitou, Markus Lazar (TU Darmstadt), Helmut Kirchner (Leibniz
Institut für neue Materialien, Saarbrücken): Dislocation Dynamics in Quasicrystals
Abstract

Section 6: Material modelling in solid mechanics 7
16:40 – 17:00: Sandrine Germain, Paul Steinmann (Universität Erlangen-Nürnberg): On inverse
form finding based on an ALE formulation
Abstract
17:00 – 17:20: Ralf Landgraf, Jörn Ihlemann (TU Chemnitz): On the direct connection of rheological
elements in nonlinear continuum mechanics
Abstract
17:20 – 17:40: N. Nörenberg, R. Mahnken (Universität Paderborn): A stochastic model for the
direct and the inverse problem of adhesive materials
Abstract
17:40 – 18:00: Holger Worrack, Wolfgang H. Müller (TU Berlin): Analysis of nanoindentation
experiments by means of rheological models
Abstract
S6.12: Special Material Behavior Thu, 16:00–18:00
Chair: Lurie Sergey, Jaan-Willem Simon S1|01–A1
16:00 – 16:20: F. Hankeln, R. Mahnken (Universität Paderborn): Carbon Fibre Prepregs: Simulation
of a Thermo-Mechanical-Chemical Coupled Problem
Abstract
16:20 – 16:40: Ligia Munteanu (Institute of Solid Mechanics of Romanian Academy): On the
axially compressed multiple walled carbon nanotubes
Abstract
16:40 – 17:00: Markus Scholle (Hochschule Heilbronn): From vortices to dislocations: How fluid
mechanics can inspire solid mechanics
Abstract
17:00 – 17:20: Johannes Schnepp (RWTH Aachen): On the connection of dissipation and deviatoric
stress in the continuum theory of defects
Abstract
17:20 – 17:40: Weiguo Li, Tianbao Cheng (College of Resources and Environmental Science,
Chongqing), Daining Fang (Peking University): Stress Reduction Factor of Ceramic
Plate to Thermal Shock
Abstract
17:40 – 18:00: Shyamal Roy, Rainer Glüge, Albrecht Bertram (Universität Magdeburg): Modeling
Deformation Twinning in FeMn Alloys
Abstract