10 Technical data 10.6 Frame structure - Mitsubishi FUSO Trucks
10 Technical data 10.6 Frame structure - Mitsubishi FUSO Trucks
10 Technical data 10.6 Frame structure - Mitsubishi FUSO Trucks
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>10</strong> <strong>Technical</strong> <strong>data</strong><br />
<strong>10</strong>.2 Specifications<br />
<strong>10</strong>.2.1 Specifications<br />
<br />
FP<br />
Model FP54SGR3VFAA<br />
Emission Euro V<br />
Wheelbase (mm) 3,800<br />
Tread, front (mm) 2,055<br />
Tread, rear (mm) 1,850<br />
Kerb weight (kg) * 6,591<br />
Front - 1st 4,569<br />
Front - 2nd —<br />
Rear - 1st 2,022<br />
Rear - 2nd —<br />
Max. G.V.W. (kg) 16,000<br />
Max. G.C.W. (kg) 40,000<br />
Engine OM457T3<br />
Max. Output 295 kW (401PS)/1,900 rpm<br />
Max. Torque 2,000 N·m (204 kgf·m)/1,<strong>10</strong>0 rpm<br />
Clutch C12W43P<br />
Transmission G230-12 (INOMAT-II)<br />
Gear ratios (1st/top) ** 11.672/0.779<br />
Control Floor shift, Automated Manual Transmission<br />
Oil cooler Air cooled, plate fin type<br />
Propeller shaft GW5E2200<br />
Transfer —<br />
Rear Axle R14T<br />
Final reduction gear D14H<br />
Ratio 4.222<br />
Front axle F900T<br />
Tires<br />
Front: 295/80R22.5 152/148M<br />
Rear: 11R22.5 148/145L<br />
Disc wheels 22.5×8.25-165-13t, <strong>10</strong> studs<br />
Steering angle (in/out) 49°/39°42'<br />
SRS air bag Standard<br />
Service brake Full Air, dual circuit<br />
Parking brake Rear wheel spring actuated<br />
Brake piping Nylon tube<br />
High functional brake system ABS with ASR (Anti Slip Regulator), Hill start assist system<br />
Front suspension Long taper leaf springs<br />
Dimensions 1,650×90×16-4<br />
Stabilizer Standard<br />
Rear suspension Trailing leaf with air suspension<br />
Dimensions<br />
Air spring: 300 mm dia.-2,<br />
Trailing leaf: <strong>10</strong>95×90×35-2<br />
Stabilizer —<br />
<strong>Frame</strong> side rail section (mm) *** 276.0×90.0×t6.0<br />
Material High tensile steel<br />
P.T.O.<br />
Fuel system<br />
—<br />
Injection pump Unit pump<br />
Governor Electronic control governor<br />
Fuel tank 400 Litres with key, aluminium<br />
Water separator Standard<br />
Exhaust system SCR system<br />
Air intake system<br />
Electrical<br />
Snorkel type<br />
Voltage 24 V Negative ground<br />
Alternator 24 V-80 Amp<br />
Batteries 12 V×2, 150 Ah/20 hr<br />
Cab Standard roof<br />
Cab suspension Air suspension type<br />
Crew number 2<br />
Front bumper/FUP Standard/Standard<br />
Rear bumper/RUP —/—<br />
* For details of kerb weight, refer to <strong>10</strong>.4.1. "Weight distribution table" page 240.<br />
** For details of gear ratio, refer to <strong>10</strong>.3.1 "Vehicle performance curve" page 217.<br />
*** For details of dimensions, refer to <strong>10</strong>.6.2 "<strong>Frame</strong> section modulus" page 277.<br />
i<br />
<strong>10</strong>.2 Specifications<br />
MITSUBISHI <strong>FUSO</strong> body/equipment mounting directives for FP.FV.FS Issue date: 29. 07. 2011<br />
! Only print out complete sections from the current version<br />
209