Major 4a - Funktronic

More documents

Recommendations

Info

Contents Delivery 2 Order Information 2 Technical Data 2 Control Elements Major 4a 3 General features 3 Rearview Major 4a 4 Sockets pinout Major 4a 4 Connecting Major 4a (5a) --> Two-Way-Radio via multiwire 5 Connecting Major 4a (5a) --> Line Interface LIM-AC 5 Keypad layout in programming mode 6 Menu structure 6 Hardware confi guration 9 2/4-wire confi guration 9 2-wire confi guration with FT630 9 Programming short call 10 Software confi guration 10 Individual programming of the buttons 11 Permanent digits of encoder 12 Transmitting 6/7/8-tone 13 sequences 13 Channel scanning function 13 Reset to factory defaults 14 Sample confi gurations Major 4a (5a) 15 Table of registers Major 4a 16 Release Notes 24 Technical Data Voltage of operation 12 V Current max. 800 mA Weight 1,5 kg Dimensions (without gooseneck microphone) 245 x 220 x 95 mm Input impedance 2/4-wire 600 Ohm Output impedance 2/4-wire 600 Ohm Order Information Ord.-No. Description 681000 Major 4a 900012 Power Supply 230/12 Volt Delivery Major 4a with handset and gooseneck microphone Power plug Power Supply not delivert with Kompetent für Elektroniksysteme - 2 - m4a_eng2_0 (09.11.04)
Control Elements Major 4a m4a_eng2_0 (09.11.04) Handset with PTT button General features Gooseneck microphone Status LED´s Short call button Call button Loudspeaker button - 3 - PTT button LC Display Function buttons Special buttons The Major 4a is the newer design of the well kown Major 4. The Display was replaced by an alphanumeric LC Display with background illumination. A gooseneck microphone with high dynamics has come to it. The programming possibilities were essentially widened and strongly simplifi ed by clear text menu structure. There are two sockets for headsets. One is normaly used for a PTT foot button. The 7 digital outputs are normaly used for channel switching or also other functions. For operation a 12 volt power supply is necessary. The Major 4a can be programmed via the serial interface or keypad. It is also possible to connect a printer or terminal on the serial interface. For printers with parallel interface is an optionaly interface available. Kompetent für Elektroniksysteme
Page 1: English 2.0 Major 4a Kompetent für
Page 5 and 6: Connecting Major 4a (5a) --> Two-Wa
Page 7 and 8: Menu structure Continuation select
Page 9 and 10: Hardware confi guration 2/4-wire co
Page 11 and 12: Individual programming of the butto
Page 13 and 14: Transmitting 6/7/8-tone sequences T
Page 15 and 16: Sample confi gurations Major 4a (5a
Page 17 and 18: Register Function Register Function
Page 19 and 20: Register Function Register Function
Page 21 and 22: Register Function 130 Function of 0
Page 23 and 24: Funtion 8 --> input state 2. Digit

Major 4a - Funktronic

Create successful ePaper yourself

Delete template?

Save as template?