OWNER'S MANUAL - LeMond Fitness

More documents

Recommendations

Info

DELIVERY Your <strong>LeMond</strong> RevMaster will arrive packed in 1 carton. Upon arrival fully inspect the carton for damage. Point out any damage to the delivery person and have the delivery person record the damage on the delivery paperwork. Contact the Customer Service Department at (425) 482-6773 to report any damage. Please follow these detailed instructions and you will find that your bike can be unpacked and assembled with ease. 10 M4 x 10 (2) M5 x 10 (1) M8 x 15 (10) Star Washer (4) Curved Washer (4) Brass Washer (1) Handlebar Assy. (1) Seat Assy. (1) Assembly Parts ASSEMBLY INSTRUCTIONS Adjustment Lever (1) Water Bottle Holder (1) Rear Stabilizer (1) Front Stabilizer (1) Stretch Pad (1) Pedal, left (1) Pedal, right (1) Track Cap (1) [not to scale]
REMOVE ThE BIkE AND COMpONENTS FROM ThE ShIppING CARTON 1. 2. 3. 4. ASSEMBLY INSTRUCTIONS Move the box to the desired location. Ensure that the carton is standing upright and remove the strapping material. Pull the cardboard edge out along the bottom of the box to remove the staples. Lift the top of the box up and set aside. Remove the two smaller boxes from the main frame of the bike. Open both boxes and verify that you have all of the hardware and parts necessary to assemble your bike; you should have this owner’s manual, all the illustrated assembly parts, and all the necessary tools. ASSEMBLY Note: It is not necessary to remove the bike from the foam shipping cradle before assembly. 1. 2. 3. 4. 5. Align the front stabilizer (the one with the transport wheels) with the holes in the main frame, below the flywheel. Attach the stabilizer with two (2) M8 x 15 mm screws and two (2) star washers above, and two (2) M8 x 15 mm screws and two (2) curved washers below. Tighten them with a hex key Align the rear stabilizer with the holes in the main frame below the seat post Attach the rear stabilizer with two (2) M8x15 mm screws and two (2) star washers above, and two (2) M8 x 15 mm screws and two (2) curved washers below. Tighten them with a hex key. Place the stretch pad on the rear stabilizer and back post of the frame. Attach with two (2) M8 X 15 mm bolts and tighten them with a hex key. M8 + star washer M8 + curved washer M8 + curved washer M8 x 15 M8 + star washer 11
Page 1 and 2: OWNER’S MANUAL
Page 3 and 4: CONGRATULATIONS CONGRATULATIONS! Yo
Page 5 and 6: TABLE OF CONTENTS WARRANTY . ......
Page 7 and 8: This symbol appearing throughout th
Page 9: Seat Assembly Adjustment Lever Stre
Page 13 and 14: GUIDELINES FOR SAFE OpERATION 1. 2.
Page 15 and 16: OpERATING INSTRUCTIONS Note: There
Page 17 and 18: fLeXiBiLitY tRAining* Achieving and
Page 19 and 20: MAintenAnce scheduLe MAINTENANCE PA
Page 21 and 22: SYMpTOM: Inconsistent resistance or
Page 23 and 24: fRAMe: • • • fLYWheeL: •
Page 25 and 26: MONTH Monthly Goals 1. 2. 3. Week D

OWNER'S MANUAL - LeMond Fitness

Create successful ePaper yourself

Delete template?

Save as template?