FinePix 3800 Manual
FinePix 3800 Manual
FinePix 3800 Manual
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
3<br />
PREFACE<br />
Screw the adapter ring in the direction of the<br />
arrow to mount it on the camera.<br />
Attaching the Lens Cap<br />
1<br />
To prevent the lens cap from appearing in the<br />
shot when you take pictures, attach the lens cap<br />
to the strap.<br />
2<br />
◆ Conversion Lens Guide ◆<br />
Wide Conversion Lens WL-FX9<br />
Changes the focal length by a factor of 0.79×<br />
(wide-angle: equivalent to 30 mm) without altering<br />
the F-stop value of the lens.<br />
hWide conversion lens specifications<br />
Magnification : 0.79×<br />
Lens configuration : 3 lenses in 3 groups<br />
Shooting range : Approx. 10 cm to infinity<br />
Dimensions : 32 mm (1.26 in.) × 70 mm<br />
(2.76 in.) dia.<br />
Mass (Weight) : Approx. 185 g (6.5 oz.)<br />
Accessories : Adapter Ring AR-FX9 (see<br />
below for specifications),<br />
Lens caps (front and rear),<br />
Lens pouch<br />
●! The enclosed adapter ring (for <strong>FinePix</strong> 4800/<br />
6900/S602) cannot be used.<br />
●! Only use the wide conversion lens at the wideangle<br />
zoom setting.<br />
●! The flash cannot be used when the wide<br />
conversion lens is mounted.<br />
Teleconversion Lens TL-FX9<br />
Changes the focal length by a factor of 1.5x<br />
(telephoto: equivalent to 340 mm) without altering<br />
the F-stop value of the lens.<br />
hTeleconversion lens specifications<br />
Magnification : 1.5×<br />
Lens configuration : 3 lenses in 3 groups<br />
Shooting range : Approx. 2.4 m to infinity<br />
Dimensions : 55 mm (2.17 in.) × 65 mm<br />
(2.56 in.) dia.<br />
Mass (Weight) : Approx. 100 g (3.5 oz.)<br />
Accessories : Adapter Ring AR-FX9 (see<br />
below for specifications),<br />
Lens caps (front and rear),<br />
Lens pouch<br />
●! Only use the tele conversion lens at the telephoto<br />
zoom setting.<br />
●! The flash cannot be<br />
used when the<br />
teleconversion lens<br />
is mounted.<br />
Mounting the adapter ring on the camera<br />
protects the lens and allows you to attach the<br />
optional conversion lens. The adapter ring<br />
Conversion<br />
lens<br />
12<br />
should be mounted on the camera at all times to<br />
protect the lens.<br />
Fit and remove the lens cap by squeezing the<br />
left and right sides of the cap.<br />
●! Commercially available filters can be mounted on the lens when the adapter ring is attached, but no more than<br />
one filter should be mounted at a time.<br />
13<br />
1
Change language