2003 Enhanced Mobility Package Operator's Manual (PDF) - GM Fleet
2003 Enhanced Mobility Package Operator's Manual (PDF) - GM Fleet
2003 Enhanced Mobility Package Operator's Manual (PDF) - GM Fleet
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
High Temperature Alert<br />
°C°F<br />
This function changes the high-temperature alert<br />
threshold. Factory default setting is 176°F (80°C).<br />
15048<br />
6. To disable this feature press the MODE<br />
button until the display reads OFF.<br />
15047<br />
Programming Steps<br />
1. Enter Level 1 Programming Mode (see Entering<br />
Programming Mode).<br />
2. To enter this function press the MODE<br />
button until the alert icon and temperature<br />
units are displayed.<br />
3. Press the TIRE button to enter and display<br />
the current value of High Temperature Alert.<br />
4. Press the TIRE button to increase the value.<br />
7. Press the SET button to save and exit this<br />
mode when the desired value is reached.<br />
8. Press the SET again to revert to normal<br />
mode.<br />
Measurement Selection-Metric or Imperial<br />
Use this mode to select the combination of pressure<br />
and temperature units.<br />
Unit combinations are Bar -°C, Bar -°F, PSI -°C, PSI<br />
-°F.<br />
5. Press the MODE button to decrease the<br />
value.<br />
2-13