Wire saw technology

HIGH-FREQUENCY ELECTRIC DRIVES
The CEDIMA high-frequency electric components are characterised by their versatile applicability at drilling or sawing concrete. With the help of the high-frequency universal
control HF-27.1 you can, already today, drive all the electrical automatic wire saws as well as the wall saws WS-290 and WS-450 EE.
The high-frequency electric motor HFM-18.1 is suited for powering wire saws as well as wall saw WS-451 EE.
The mini hydraulic power pack HAG-2, providing the wire feed when wire sawing, serves as automatic drill feed when diamond drilling technology is used.
connecting schema
CSA-1001 E and CSA-100 E
set of hoses 2-parts
operating current wire drive
oil flow feed
electric control line
necessary components for the operation of CSA-1001 E CSA-100 E
CSA-1001 automatic wire saw with 2 swivel rolls and 10 storage rolls, without wire drive unit and wire drive wheel X
- - - wire drive unit with high-frequency electric motor HFM.18.1 with drive wheel guard (without motor) X
- - - wire drive wheel Ø 600 mm with interchangeable bandage X
CSA-100 automatic wire saw with 2 mini swivel rolls, 8 storage rolls and ground mouting foot, without wire drive motor X
HFM-18.1 high-frequency electric motor, 18.1 kW, with 10 m cable X X
HAG-2 power pack for hydraulic feed; 230 V/50 Hz, 1,2 l/min, 0 - 95 bar X X
HF-27.1 high-frequency universal control, 27 kW, 400 V/32 A X X
- - - set of hoses 2-parts, 10 m long, for feed at drilling and wire sawing X X
- - - connecting cable HF-27.1 to HAG-2 X X
- - - universal control box with 10 m cable X X
- - - universal remote control box (alternatively to universal control box) X X
9