Aggregates - testing.de

Order no.
Accessories (options) for the
ALPINE ® Air-jet sieve 200 LS-N
5.2267
Small filter to relieve the load on the vacuum cleaner
This filter is recommended if the 200 LS-N is used in continuous
operation.
Filtration surface is approx. 1m2; dust-collection capacity approx.
1 litre; complete with electrically conductive suction hose and
connector
5.2268
Fines collection filter
To recover even the smallest analysis amounts;
filter disk approx. 320 mm diam.; complete with suction hose and
100 ea. paper filters
5.2269
100 ea. Spare filters
Paper filters, 320 mm diam. type MN 712, and 2 ea. fibrous-fabric
filters
5.2270
ALPINE ® High-performance cyclone dust separator GAZ 125
For recovery of fines, including larger amounts of material.
No product contamination by filter lint. The dust separator can be
disassembled and washed. Fines are collected in a glass bottle.
Bottle capacity: approx. 1 dm 3
The cyclone dust separator is complete with mount, glass bottle
and electrically conductive suction hose.
5.2271
A general configuration:
This sketch shows a general configuration that covers all requirements
of frequently charging testing operations in labs, test centres
and test stations, consisting of:
- ALPINE ® Air-jet sieve 200 LS-N
- High performance industrial vacuum cleaner
- Small filter to reliere the load
- High-performance cyclone dust separator GAZ 125
Technische Änderungen vorbehalten. Subject to technical modification without notice.
5.38