LED Steuerungstechnik / eldoLED 2013

Datasheet Analog-to-DMX Bridge
Accessories
Analog Dimmer to DMX Bridge
eldoLED bridges
The analog-to-DMX bridge is part of the series of bridges
developed by eldoLED to interface between DMX/LedSync
networks and other network protocols.
68 mm
2.68''
Analog-to-DMX bridge
The analog-to-DMX bridge translates analog dimmer signals
into DMX- and LedSync-compatible control signals.
The bridge comes in a DMX bridge and 5DMX bridge version.
The first one allows you to pass on the converted signal to one
DMX universe, the latter one to up to five DMX universes.
The eldoLED analog-to-DMX bridges are ideally suited to retrofit
existing analog lighting installations. They allow you to
make use of all the advantages offered by the digital LedSync
network signals, such as prime signal integrity over long cable
lengths.
Calibrating dimming values
The output of the dimmers that are available on the market today
varies. eldoLED’s analog-to-DMX bridges have solved
this problem: they let you calibrate dimming values, offering
you maximum flexibility and the possibility of optimum system
integration.
5DMX: 0-10V analog input
In addition to the dimmer connection, the 5DMX version supports
a 0-10V signal. Typically, this type of signal is generated
by building automation systems or light controllers and can be
used to set the output of all connected LEDs.
Analog-to-DMX bridge
Features
• Plug-and-play solution for LED dimming in existing
applications
• Screw terminals allowing easy connection of leads
• Operating supply voltage range: 12V - 32V DC
• 0-10V interface
Advantages
• Conversion of DC dimmer into USITT DMX512 or
LedSync signals
• Accurate dimming solution
• Easy network setup
• Simplifies total system solution
Standard
Dimmer
In
Out
In
Out
In
Analog-to-DMX bridge
Example of dimmer wiring schematic
© 2009 eldoLED. All rights reserved.
For more information, visit www.eldoled.com