LED Konverter/Treiber & Zubehör

STROMQUELLEN 

ANWENDUNGSBEISPIELE 

Konverter & 

S21 LED Netzteil - 24V / 60 Watt 

Varianten ! Eingang ! Ausgang ! Art. Nr. ! 

Zubehör 

60 Watt (fernsteuerbar) 

120-277V 24V, 2,5A 82369 

Stand 03-2013 

Ansteuerbar mit Kontrollspannung 0...10VDC 

DC 24V 

S21 LED Netzteil - 24V / 100 Watt 

Varianten ! Eingang ! Ausgang ! Art. Nr. ! 

100 Watt (fernsteuerbar) 

120-277V 24V, 4,2A 82370 

Ansteuerbar mit Kontrollspannung 0...10VDC 

Synergy 21 Netzteile - 

Mögliche Anwendungsbeispiele 

LED Netzteile für jeden Einsatzort und in verschiedenen Leistungsklassen finden Sie hier. 

Unser umfangsreiches Portfolio bietet für vielfälltige Anwendungen die 

optimale Lösung. 

98 Ob STROMQUELLEN zum Einbau in 24Volt der Decke fernsteuerbar bis hin zum IP67 geschützten Netzteil für den Außenbereich. 

DC 24V 

92 STROMQUELLEN 

104 INFORMATIONEN Anwendungsbeispiele

12~35W Single Output LED Power Supply 

Features 

• Universal AC input / Full range 

• Fully isolated plastic case 

• Protections: Short circuit / Overload (APV only) / Over voltage 

• Constant voltage design (C.V. mode) for APV series 

• Constant current design (C.C. mode) for APC series 

• IP30 design 

• Withstand 300VAC surge input for 5 seconds (APV/C-25/35) 

• Class 2 power unit / Pass LPS 

• Isolation class II, no F.G. 

• Cooling by free air convection 

• 100% full load burn-in test 

• Low cost, high reliability 

• Suitable for LED lighting and moving sign applications 

• 2 years warranty 

APV-12/16 

APC-12/16 

APV-25/35 

APC-25/35 

NEW 

INPUT 

OUTPUT 

AC input voltage range 90~264VAC ; 127~370VDC 

APC/V-12: Cold start, 70A at 230VAC 


AC inrush current (max.) APC-16: Cold start, 45A at 230VAC 

Cold start, 45A at 230VAC 

APV-16: Cold start, 50A at 230VAC 

Overload Features Range >105% rated output current 

• protection LPV: Universal (APV only) AC input Type / Full Hiccup range up mode, auto-recovery• Isolation class II, no F.G. 

Over LPH-18: voltage 180~264VAC protectioninput 110%~145% only rated output voltage • Withstand 300VAC surge input for 5 seconds (except for LPH/LPL-18) 

Withstand LPL-18: 90~132VAC voltage input only I/P-O/P: 3.75kVAC 


• Working Fully encapsulated temperaturewith IP67 -30~+70 level O C (refer to output derating • 100% curve) full load burn-in test 

• Vibration Protections: Short circuit / 10~500Hz, Overload / Over 2G 10 voltage minutes / /1 cycle, • Low period cost, high for 60 reliability minutes each along X, Y, Z axes 

Safety standards Over temperature UL8750 (LPH-18/LPL-18 approved; Design only) refer • to Suitable TUV EN60950-1 for LED-based Design decorative/architectural refer to TUV EN60950-1, lighting, UL8750 LED stage 

• Constant voltage design (C.V. mode) 

and theater lighting, and LED electronic displays 

EN55015, EN61000-3-2 class A , EN61000-3-3, EN55022 class B, EN61000-3-2 class A, 

• EMC Class standards 2 power unit / Pass LPS 

EN61000-4-2,3,4,5,6,8,11, 

(except for LPV-100) 

EN61547 


EN61000-3-3, EN61000-4-2,3,4,5,6,8,11 

Input UL LPL-18 rated, 18AWGx2C LPH-18 (15cm) LPV-20 UL LPV-35 rated, 18AWGx2C LPV-60 (15cm) LPV-100 

Connection 

Output UL rated, 20AWGx2C (15cm) UL rated, 18AWGx2C (15cm) 

Dimension (LxWxH)(mm) 77x 40x 29 84x 57x 29.5 

INPUT 

2 

APV-12 Series (C.V. mode) 

APC-12 Series (C.C. mode) 

Model No. Output Tol. R&N Effi. 

Model No. Output Io Tol. R&N Effi. 

OUTPUT 

APV-12-5 5V, 0~2.0A ±5% 100mV 76% 

APC-12-350 9~36V, 350mA ±8% 300mV 82% 

APV-12-12 12V, 0~1.0A ±5% 120mV 82% 

APV-12-15 15V, 0~0.8A ±5% 120mV 82% 

APC-12-700 9~18V, 700mA ±8% 250mV 80% 

APV-12-24 24V, 0~0.5A ±5% 150mV 84% 

AC input voltage range 90~132VAC 180~264VAC 90~264VAC 

APC-16 Series (C.C. mode) 

(for 350mA) 

(for 700mA) 

APV-16 Series (C.V. mode) Cold start, Cold start, Cold start, Cold start, Cold start, Cold start, 

AC inrush current 18~60W (max.) 


Model No. Output 40A 

Single 

at Tol. 115VAC 

Output 

50A R&N at 

LED 

230VAC 

Power 

Effi. 70A at 

Supply 

230VAC 55A at 230VAC 60A at 230VAC 75A at 230VAC 

Overload APV-16-5 5V, Range 0~2.60A >105% ±5% 100mV 76% 

APC-16-350 

110%~150% 

12~48V, 350mA ±8% 300mV 84% 

Protection APV-16-12 12V, 0~1.25A ±5% 120mV 80% 

APC-16-700 9~24V, 700mA ±8% 250mV 83% 

Features Type Hiccup mode, auto-recovery 

APV-16-15 15V, 0~1.00A ±5% 120mV 81% 

• 

Over 

LPC: 

voltage 

APV-16-24 Universal 

protection 

24V, AC 0~0.67A input 

115%~135% 

/ Full ±5% range 

rated output voltage 

150mV 83% • Class 2 power unit / Pass LPS 

Withstand APC-25 Series (C.C. mode) 

LPHC-18: 

voltage 

180~264VAC input 

I/P-O/P: 

only 

3kVAC 


APV-25 Working Series (C.V. mode) 


LPL C -18: 

temperature 

90~132VAC input 

-30~+70 

only 

O C 

• Cooling by free 

-30~+65 

air convection 

O C -30~+70 O C -25~+70 O C 


APC-25-350 25~70V, 350mA ±8% 300mV 83% 

• 

Vibration 

Fully encapsulated with 

10~500Hz, 

IP67 level 

2G 10 minutes /1 cycle, period 

• 100% 

for 

full 

60 minutes 

load burn-in 

each along 

test 

X, Y, Z axes 

APV-25-5 5V, 0~3.5A ±5% 120mV 75.5% 

APC-25-500 15~50V, 500mA ±8% 300mV 83% 

• Protections: APV-25-12 Short 12V, 0~2.1A circuit 

TUV 

/ Over 

EN60950-1, ±5% voltage 150mV EN61347-1, 

/ 

82.0% 

TUV EN60950-1(LPV-20 • Low cost, high reliability only), 

APV-25-15 15V, 0~1.68A ±5% 150mV 83.0% 

APC-25-700 11~36V, 700mA ±8% 300mV 83% 

Safety standardsOver temperature EN61347-2-13 ( LPLC/LPHC-18 approved only for ) 

IEC61347-1, 

• Suitable 

IEC61347-2-13 

for LED-based 

(LPV-35 

decorative 

only), 

/ architectural lighting, 

APV-25-24 24V, 0~1.05A 

LPH-18 

±5% 150mV 83.0% UL1310 APC-25-1050 (except for LPV-60-5 9~24V, 1050mA & LPV-100), 

• Constant current design (C.C. mode) 

LED stage and theater lighting, and 

±8% 

LED electronic 

300mV 

displays 

83% 

APV-25-36 36V, 0~0.7A ±5% 150mV 84.0% UL879 (except for LPV-35/100 & LPV-60-5) approved 

• Withstand 300VAC surge input for 5 seconds 


APV-35 

EMC standards 

Series 

FCC part 15 class B EN55022 class B, EN61000-3-2 

(C.V. mode) 

APC-35 class Series A, EN61000-3-3, (C.C. mode) EN61000-4-2,3,4,5,6,8,11 

(except for LPHC/LPLC-18) 

Input 

Model No. Output Tol. R&N Effi. UL rated, Model No. UL rated, Output 18AWGx2C Io (60cm) Tol. 18AWGx2C R&N (30cm) Effi. 

Connection 

APV-35-5 5V, 0~5.0A UL rated,18AWGx2C ±5% 120mV (30cm) 76.5% 18AWGx2C APC-35-350 UL 28~100V, rated, 350mA ±8% UL 350mV rated, 84% 

Output 

APV-35-12 12V, 0~3.0A 

LPLC-18 LPHC-18 

±5% 150mV 83.0% (60cm) LPC-20 16AWGx2C (60cm) LPC-35 14AWGx2C LPC-60 (30cm) 

APC-35-500 25~70V, 500mA ±8% 350mV 84% 

Dimension APV-35-15(LxWxH)(mm) 15V, 0~2.4A 140x 30x ±5% 22 150mV 84.0% 118x 35x 26 

APC-35-700 

APV-35-24 INPUT 24V, 0~1.5A ±5% 180mV 84.0% 

148x 40x 30 162.5x 42.5x 32 

15~50V, 700mA ±8% 

190x 52x 37 

350mV 84% 

LPL-18 APV-35-36 Series 36V, (C.V. 0~1.0A mode) ±5% 180mV 85.0% 

(LVD) 

APC-35-1050 11~33V, 1050mA 

LPV-35 Series (C.V. mode) 

±8% 350mV 84% 



LPL-18-12 

OUTPUT 

LPV-35-5 5V, 0~5.0A (peak 6A) ±6% 80mV 77% 

12V, 0~1.5A ±3% 120mV 80% 

LPV-35-12 12V, 0~3.0A ±5% 120mV 84% 

LPL-18-24 24V, 0~0.75A ±3% 150mV 83% 

LPV-35-15 15V, 0~2.4A ±5% 120mV 84% 

LPV-35-24 24V, 0~1.5A ±5% 150mV 85% 

LPL-18-36 36V, 0~0.5A ±3% 200mV 84% 

LPV-35-36 36V, 0~1.0A ±5% 150mV 85% 

AC input voltage range 90~132VAC 180~264VAC 90~264VAC 

LPH-18 Series (C.V. mode) 

LPV-60 Series (C.V. mode) 

(for 48V only) 

(for 12~36V)


Features 


• Fully isolated plastic case with IP64 level 

• Built-in constant current limiting circuit with adjustable OCP level 

• Protections: Short circuit / Over current / Over voltage 

• Optional dimming function: 1.1~10VDC(D type) or PWM (P type) 

controlled 

ELN-30 




• Suitable for economical LED indoor lighting and LED electronic 

displays 


ELN-60 

INPUT 

OUTPUT 

(standard) 

OUTPUT 

(Dimming 

Function) 


AC inrush current (max.) Cold start, 55A at 230VAC Cold start, 60A at 230VAC 

DC adjustment range ±10% rated output voltage 

Current adjustment 16~60W range Single 75%~103% Output AC Dimmable Power Unit 

Over current protection 95%~110% constant current limiting, auto-recovery 

Over Features voltage Range 110%~150% rated output voltage 

•AC protection phase-cut dimming, Type work Shut with down leading o/p voltage, edge and re-power on to • recover IP30 design 

Withstand trailing edge voltage TRIAC dimmers I/P-O/P: 3kVAC 

• Class 2 power unit / Pass LPS (PCD-16/25) 

•PCD-16/25: Working temperature 115VAC or 230VAC -20~+60 input O C (refer to output derating curve) • Isolation class II, no F.G. 

PCD-40/60: 230VAC input only 

• Protections: Short circuit / Over temperature 

Vibration 

10~500Hz, 2G 10 minutes /1 cycle, period for 60 minutes each along X, Y, Z axes 

• Built-in active PFC function 


Safety standards 

UL1310 approved; Design refer to TUV EN60950-1 



• EMC Constant standards current design EN55022 class B, EN61000-3-2 class A , EN61000-3-3, EN61000-4-2,3,4,5,6,8,11 

Input UL rated, SVT 18AWGx2C (32cm) UL rated, SVT 18AWGx2C (30cm) 

Connection 

Without dimming: PCD-16/25 

UL rated, SVT 18AWGx2C (32cm) Without dimming: PCD-40/60 

UL rated, SVT 18AWGx2C (30cm) 

Output 

INPUT 

With dimming(optional): UL2464 18AWGx4C (32cm) With dimming(optional): UL2464 18AWGx4C (30cm) 

(A type) 

Dimension (LxWxH)(mm) 145x 47x 30 181x 61.5x 35 

Packing 0.26kg ; 60pcs / 16.6kg 0.4kg ; 24pcs / 11.0kg 

NEW 

INPUT 

OUTPUT 

(B type) 

ELN-30 Series 

(for 48V only) (for 5~27V) ELN-60 Series 

(for 48V only) (for 9~27V) 



ELN-30-5 5V, 0~5.0A ±5% 80mV 75% 

ELN-60-9 9V, 0~5.0A ±5% 120mV 82% 

AC ELN-30-9 input voltage 9V, range 0~3.4A 115VAC ±5% (90~135VAC) 100mV or 230VAC 80% (180~295VAC) 

ELN-60-12 

230VAC (180~295VAC) 

12V, 0~5.0A ±5% 120mV 85% 

ELN-30-12 12V, 0~2.5A ±5% 120mV 82% 

ELN-60-15 PCD-40: 15V, 0~4.0A Cold start, 11A ±5% at 230VAC 

AC ELN-30-15 inrush current 15V, (max.) 0~2.0A Cold start, ±5% 10A at 120mV 230VAC 

150mV 86% 

82% 

16~60W Single Output with PFC 

PCD-60: Cold start, 13A at 230VAC 

ELN-30-24 24V, 0~1.25A ±5% 150mV 85% 

ELN-60-24 24V, 0~2.5A ±5% 150mV 87% 

Withstand voltage I/P - O/P: 3.75kVAC 

ELN-30-27 27V, 0~1.12A ±5% 150mV 85% 

ELN-60-27 27V, 0~2.3A ±5% 200mV 87% 

Working ELN-30-48 temperature 48V, 0~0.63A -30~+60ºC ±5% (refer 250mV to output derating 87% curve) 

Features 

ELN-60-48 -30~+50ºC 48V, 0~1.3A (refer to output ±5% derating 250mVcurve) 

88% 

•PLD-25: Safety standards 

►► Dimming Universal Control AC input (optional) UL8750 (up to (PCD-16/25 295VAC) only), / Full ENEC range EN61347-1, • EN61347-2-13, Class 2 power EN62384(B-Type unit / Pass LPS only) (PLD-16/25) 

approved (PCD-40/60 pending) 

PLD-16: 115VAC or 230VAC A-Type: input FCC part 18 non-consumer D Type equipment : • Isolation class II, no F.G. P Type : 

EMC standards 

1.1~10Vdc external control signal 

PWM control signal 

PLD-40/60: Through the 230VAC dimming input function, 

B-Type: only output 

EN55015, 

current 

EN61000-3-2 

of 

class C, • EN61000-3-3, Protections: Short EN61000-4-2,3,4,5,6,8,11, circuit / Over temperature EN61547 

V 

•Built-in ELN series active can Input PFC be adjusted function A-Type: to reduce UL1430 the energy 18AWGx2C (7.5cm); B-Type: • Suitable NISPT-1 DIM+ for 18AWGx2C indoor LED (7.5cm) lighting applications 

Connection f: 100Hz ~ 3KHz 

• Fully 

consumption 

isolated Output plastic 

or adjust 

case 

the UL1430 brightness 18AWGx2C of LEDs (15cm) 


+ 

ELN 

f 

• Dimension Constant current 

connecting 

(LxWxH)(mm) design 

to it. Two kinds 

84x 

of 

57x 

control 

29.5 • 3 years warranty 

signal are 

128x 60x 31.5 

Vdc 

Control input 

10V 


accepted: 1.1~10VDC (D-type option) or PWM 

PCD-16 Series 

(for 350mA) (for 700~1400mA) (B Type) (A Type) (B Type) PCD-60 Series 

ENEC/CB/CE pending 

signal (P-type option). 

f 

PLD-16 

PLD-25 

PLD-40 

t1 t2 PLD-60 


Model 

DIM- 

No. Output Io Tol. R&N Effi. 

INPUT 

Vdc 1.1~10V 

Duty= 

t1 

, 0~100% Low: 0V 

t1+t2 

PCD-16-350 24~48V, 350mA ±5% 4.6V 82.0% PCD-60-500B 65~115V, 500mA ±5% High: 10.2V 10V 87% 

(A-Type) 

PCD-60-700B 50~86V, 700mA ±5% 5.6V 86% 

PCD-16-700 16~24V, 700mA ±5% 2.7V 81.0% Order No.: ELN- 30 - 5 D 

PCD-60-1050B 

Order No.: ELN- 30 - 5 P 

34~57V, 1050mA ±5% 3.8V 86% 

PCD-16-1050 INPUT 

OUTPUT 12~16V, 1050mA 

(B-Type & PLD-25) 

±5% 2.2V 80.5% PCD-60-1400B 25~43V, 1400mA ±5% 3.4V 85% 

PCD-16-1400 8~12V, 1400mA ±5% 2.0V 80.0% PCD-60-1750B 20~34V, 1750mA ±5% 3.3V 85% 

PCD-60-2000B 18~30V, 2000mA ±5% 2.4V 85% 

=A or B-Type ; A-Type: 90~135VAC, B-Type: 180~295VAC 

PCD-60-2400B 15~25V, 2400mA ±5% 2.4V 84% 

115VAC (90~135VAC) or 

AC input voltage range 

90~295VAC 

230VAC (180~295VAC) 

230VAC (180~295VAC) 

►► Dimmer Compatibility Chart 

PCD-25 Series 

(for 350/700mA) (for 1050/1400mA) (B Type) (A Type) (B Type) 

Model No. Output Cold start, Io Tol. R&NCold Effi. start, 

AC inrush current (max.) 

Manufacturer Cold start, 

20A at 230VAC 

15A at 230VAC 

25A at 230VAC 

Dimmer Model 

NEW 

5

TUV 

Rheinland 

Product Safety 

Under 

TUV 

Rheinland 


Under 


Features 

• Universal AC input (up to 295VAC) / Full range 


• Protections: Short circuit / Over temperature(PLM-40) 


• Constant current design 




• Low cost, high reliability 

• Suitable for indoor LED lighting applications 


PLM-12 

PLM-25 

PLM-40 

Development 

Development 


90~295VAC; 127~417VDC 



Setup time 2000ms at full load and 230VAC 1500ms at full load and 230VAC 

Features 

Short circuit protection Hiccup mode, auto-recovery 


• Built-in 3 in 1 dimming function 

• Over Protections: temperature Short (PLM-40) circuit / 95ºC Over ±10ºC current (RTH1) / Over shut voltage down o/p / voltage, (1~10VDC, re-power PWM on to signal recover or resistance) for D type 

Over temperature 

• Fully encapsulated with IP67 level [optional for LPF-16(D)] 

• Withstand Built-in active voltagePFC function I/P-O/P: 3.75kVAC 




• Working Isolation temperature class II, no F.G. -30~+45ºC (refer to output derating curve) • Suitable for dry, -30~+50ºC damp, and (refer wet location to output derating curve) 




Design refer to UL8750, ENEC EN61347-1, EN61347-2-13, EN62384 

LPF-16(D)/25(D) LPF-40(D)/60(D) 

LPF-90(D) 

EMC standards 

Design refer to EN55015, EN61000-3-2 class C, EN61000-3-3, EN61000-4-2,3,4,5,6,8,11, EN61547 

INPUT 

Connection (Input / Output) 2+2P push terminal block 

OUTPUT 

(Non-Dimming 

Dimension (LxWxH)(mm) 145x 38x 22 175x 42x 24 

Function) 


NEW 

OUTPUT 

(Dimming 

PLM-12 Function) Series 

UL/CUL/ENEC/CB/CE pending PLM-40 Series 

UL/CUL/ENEC/CB/CE pending 

Model No. Output Io Tol. R&N 


Effi. 


PLM-12-350 18~36V, 350mA ±5% 3.6V 85% 

LPF-16(D): Cold start, 45A LPF-40(D): PLM-40-350 Cold start, 50A 


53~105V, 350mA Cold start, 55A ±5% at 230VAC 10V 

LPF-25(D): Cold start, 50A LPF-60(D): Cold start, 55A 

PLM-12-500 30~96W 12~24V, Single 500mA Output ±5% 2.4V with PFC 84% 

88% 

Over current protection 95% ~108% constant current, auto-recovery 

PLM-12-700 9~18V, 700mA ±5% 1.8V 83% 

Over voltage protection 110%~150% rated output voltage 

PLM-40-500 40~80V, 500mA ±5% 8V 87% 

Withstand PLM-12-1050 Features voltage 6~12V, 1050mA I/P - O/P: 3.75kVAC ±5% 1.2V 82% 


• PLM-40-700 Isolation class II, 28~55V, no F.G. 700mA for PLC-30 

Working temperature -35~+70ºC -40~+70ºC (refer to output derating curve) ±5% 6V 86% 

• PLM-25 Fully isolated Seriesplastic case with screw UL/CUL/ENEC/CB/CE terminal style of I/O pending • Cooling by free air convection 

UL8750, ENEC EN61347-1, EN61347-2-13, EN62384, PSE J61347-1, J61347-2-13 approved for LPF-16(D)/25(D); 

• Safety Built-in Model standards No. constant current Output UL8750, 

limiting circuit 

TUV Io Tol. EN61347-1, 

(C.V.+C.C. R&N EN61347-2-13, 

mode) Effi. • PSE Protections: 

PLM-40-1050 J61347-1, J61347-2-13 Short circuit 

19~38V, 1050mA approved / Over current for ±5% LPF-40(D)/60(D)/90(D) 

/ Over voltage / 

4V 86% 

• 

EMC 

Adjustable 

PLM-25-350 standards 

output voltage 

36~72V, 350mA EN55015, 

and current 

EN61547, 

level 

±5% EN61000-3-2 7.2V 88% class C, EN61000-3-3, Over EN61000-4-2,3,4,5,6,8,11 

temperature 

• Built-in active Input PFC function, UL rated, PF>0.9 SJTW for 75% 18AWGx2C of load (30cm) or higher • 100% full load burn-in test 

PLM-25-500 25~50V, 500mA ±5% 5.0V 87% PLM-40-1400 15~29V, 1400mA ±5% 3V 

• High efficiency up to 89% LPF-16/25: 

LPF-40/60: • Suitable for LED lighting LPF-90: and moving sign applications 

85% 

• 

Connection 

PLM-25-700 Class 2 power Output unit 18~36V, / Pass 700mA UL LPS rated, SVT ±5% 18AWGx2C 3.6V (30cm) 86% UL rated, SVT 18AWGx2C (30cm) UL rated, SVT 18AWGx2C (30cm) 


LPF-16D/25D: 

LPF-40D/60D: UL2464 

LPF-90D: 

PLM-40-1750 12~23V, 1750mA ±5% 2.5V 

PLM-25-1050 12~24V, 1050mA UL rated, SJTW ±5% 18AWGx4C 2.4V (30cm) 86% 18AWGx2C(30cm)+22AWGx2C (30cm) UL2464 18AWGx4C (30cm) 

PLC-30 

Dimension (LxWxH)(mm) 148x 40x 32 162.5x PLC-45 43x 32 PLC-60 

PLC-100 

161x 61x 36 

85% 

8 

LPF-16 Series 

P S 

E 


LPF-16 -12 12V, 0~1.34A ±4.0% 150mV 83.0% 

LPF-16 -15 15V, 0~1.07A ±4.0% 150mV 83.0% 

LPF-16 -20 20V, 0~0.80A ±4.0% 150mV 84.5% 

LPF-16 -24 24V, 0~0.67A ±4.0% 150mV 84.5% 

LPF-16 -30 30V, 0~0.54A ±4.0% 200mV 84.5% 

LPF-16 -36 36V, 0~0.45A ±4.0% 250mV 


85.0% 


LPF-40 -24 24V, 0~1.67A ±4.0% 150mV 87.0% 

LPF-40 -30 30V, 0~1.34A ±4.0% 200mV 88.0% 

LPF-40 -36 36V, 0~1.12A ±4.0% 250mV 88.0% 

LPF-40 -42 42V, 0~0.96A ±4.0% 250mV 88.5% 

LPF-40 -48 48V, 0~0.84A ±4.0% 250mV 89.0% 

LPF-40 -54 54V, 0~0.76A ±4.0% 350mV 89.0% 

LPF-60 

Series 

(for 48~54V) 

(for 12~42V) 

P S 

E

TUV 

Rheinland 


TUV 

Rheinland 


TUV 

Rheinland 


TUV 

Rheinland 


TUV 

Rheinland 


TUV 

Rheinland 



Features 


• Fully isolated plastic case with IP64 level 

• Built-in active PFC function, PF>0.9 for 75% of load or higher 

• Protections: Short circuit / Over current / Over voltage / 

Over temperature 

• Built-in constant current limiting circuit (C.V.+C.C. mode) 


• Isolation class II, no F.G. for PLN-20/30 

• User adjustable output voltage (except for PLN-20) and 

current protection level 




PLN-20 PLN-30 PLN-45/60 PLN-100 

INPUT 

PLN-20 PLN-30 PLN-45/60/100 

PLN-20 

OUTPUT 

PLN-30/45/60/100 

AC input voltage range 90~277VAC; 127~392VDC 90~295VAC ; 127~417VDC 

AC inrush current 40~80W (max.) Single Cold start, Output 35A at with 230VACPFC 


85%~100% rated output 

DC adjustment range None 95%~108% rated output voltage 

voltage 

Current Features adjustment range 75%~100% 75%~103% 

95%~110% constant 100%~110% constant 95%~110% constant 95%~102% constant 


• Suitable for dry, damp location 

Over current protection current limiting, 

current limiting, current limiting, current limiting, 

• Fully isolated plastic case with auto-recovery 

IP64 level 

auto-recovery • Suitable for auto-recovery 

LED lighting and moving auto-recovery 

sign applications 

• Built-in active PFC function, 105%~142% 

PF> 0.9 for 60% of load or 110%~155% 

higher • Multiple models 115%~140% for choice: 107%~135% 

Over voltage protection 

• Protections: 

rated output voltage rated output A-Type: voltageIP64 rated rated. output Output voltage and rated constant output current voltagelevel 

Short circuit / Over current 2300ms(setup / Over voltage time) / Over at temperature 2000ms(setup time) at can 1500ms(setup be adjusted through time) at internal potentiometer 

1200ms, 80ms, 60ms 

• 

Setup, 

Built-in 

rise, 

constant 

hold up 

current 

time 

limiting 

full load 

circuit 

and 230VAC, 

(C.V.+C.C. mode) 

full load and 

B-Type: 

230VAC, 

IP64 

full 

rated 

load 

and 

and 

built-in 

230VAC, 

3 in at 1 dimming full load function and 230VAC 

no hold up time 

no hold up time no hold up time 


(1-10VDC, PWM signal, or resistance) 

Withstand voltage I/P-O/P: 3.75kVAC I/P-O/P: 3.75kVAC I/P-FG: 2kVAC O/P-FG: 0.5kVAC 

• High efficiency up to 91% 


Working temperature -30~+60 O C -30~+50 O C (refer to output derating curve) 


UL8750, TUV EN61347-1, EN61347-2-13, PSE J61347-1, J61347-2-13 approved for PLN-20 


UL879, UL1310, UL8750(PLN-45/60), TUV EN61347-1, EN61347-2-13,PSE J61347-1, J61347-2-13 approved for PLN-30/45/60 

UL879, UL1310, HLN-40H UL8750, TUV EN61347-1, EN61347-2-13, HLN-60H EN60950-1, PSE J61347-1, J61347-2-13 HLN-80H approved for PLN-100 

EN55015, EN55022 class B (PLN-60/100 only), EN61000-3-2 class C, EN61000-3-3, 

EMC standards 

EN61000-4-2,3,4,5,6,8,11, EN61547 

INPUT 

Input UL rated, UL1015 

UL rated, SVT 

UL rated, SVT 18AWGx3C (30cm) UL rated, SVT 18AWGx3C (31cm) 

Connection 

Output 18AWGx2C (32cm) 18AWGx2C A (32cm) B UL rated, SVT 18AWGx2C (30cm) UL rated, SVT A18AWGx2C (31cm) B 

Dimension (LxWxH) (mm) 148.5x 38.5x 28 145x 47x 30 181x 61.5x 35 200x 70.5x 35 

OUTPUT 

P S 

PLN-20 Series 

E 


PLN-45-20 20V, 0~2.3A ±10% 1.8V 86.5% 


PLN-45-24 24V, 0~1.9A ±10% 2.7V 86.5% 

AC PLN-20-12 input voltage 12V, range 0~1.6A 90~305VAC; ±10% 127~431VDC 

2.5V 80.0% 

PLN-45-27 27V, 0~1.7A ±10% 2.7V 86.5% 

PLN-20-18 18V, 0~1.1A ±10% 3.0V 81.0% 

PLN-45-36 36V, 0~1.25A ±10% 3.6V 87.5% 

AC inrush current 40~60W (max.) Multiple-Stage Cold start, 50A at Output 230VAC Current Cold start, LED PLN-45-48 55A Power at 230VAC 48V, Supply 0~0.95A ±10% 4.6V 87.5% 

PLN-20-24 24V, 0~0.8A ±10% 3.0V 82.0% 

DC adjustment range ±10% rated output voltage (A-Type only) 

P S 

PLN-20-36 36V, 0~0.55A ±10% 3.0V 83.0% PLN-60 Series 

E 


(for 12~36V) 

Current adjustment range 60%~100% 

PLN-20-48 48V, 0~0.42A ±10% 3.8V 83.5% 


Over current protection LCM-40(DA) 95%~108% / 60(DA) 

Features 

constant current limiting, auto-recovery 

PLN-60-12 12V, 0~5.0A ±10% 2.0V 85.0% 

P S 

PLN-30 Series 

E 

(for 9~36V) (for 48V only) (for 9~36V) 

Over voltage protection 109%~150% rated output voltage • Output PLN-60-15 current 15V, level 0~4.0A selectable by ±10% DIP switch2.4V 86.0% 


PLN-60-20 20V, 0~3.0A ±10% 1.8V 87.5% 

Setup, rise, hold up time 1000ms, 80ms, 16ms at full load and • 180~295VAC 230VAC input only 

PLN-30-9 9V, 0~3.3A ±10% 2.6V 80.0% 

PLN-60-24 24V, 0~2.5A ±10% 2.7V 87.0% 

Withstand PLN-30-12voltage 

12V, 0~2.5A I/P-O/P: ±10% 3.75kVAC, 2.0V I/P-FG: 82.5% 2kVAC, O/P-FG:0.5kVAC 

• Built-in 

PLN-60-27 

active PFC 

27V, 

function 

0~2.3A ±10% 2.7V 88.0% 

Working PLN-30-15 temperature 15V, 0~2.0A -40~+50 ±10% O C (refer 2.6V to output 83.5% derating 

• 

curve) 

Protections: PLN-60-36 Short 36V, circuit 0~1.7A / Over ±10% voltage / Over 3.6V temperature 89.0% 

PLN-60-48 48V, 0~1.3A ±10% 4.6V 89.0% 

PLN-30-20 20V, 0~1.5A ±10% 2.6V 84.0% • Cooling by free air convection 

UL8750, TUV EN61347-1, EN61347-2-13, PSE J61347-1, J61347-2-13 approved; 

P S 

Safety PLN-30-24 standards 24V, 0~1.25A ±10% 2.6V 84.0% • PLN-100 Fully isolated Seriesplastic case 

E 


(for 12~36V) 

Design refer to UL/EN60950-1, EN60335-1for HLN-40H/60H 

PLN-30-27 27V, 0~1.12A ±10% 2.3V 84.5% • Class 

EMC 

Model II No. power unit, Output no F.G. Tol. R&N Effi. 

PLN-30-36 standards 36V, 0~0.84A EN55015, ±10% EN61000-3-2 4.5V class 85.0% C, EN61000-3-3, EN61000-4-2,3,4,5,6,8,11, EN61547 

• IP20 PLN-100-12 design 12V, 0~5.0A ±3% 150mV 83.0% 

PLN-30-48 48V, Input 0~0.63A UL rated, ±10% SVT 18AWGx3C 3.7V (30cm) 85.5% 

PLN-100-15 15V, 0~5.0A ±3% 150mV 85.0% 

Connection 

• Built-in 0~10Vdc and PWM signal dimming function (LCM-40/60) 

Output A-Type: UL rated, SVT 18AWGx2C (30cm) PLN-100-20 ; B-Type: 20V, UL rated, 0~4.8A SVT 18AWGx4C ±3% 150mV (30cm) 88.5% 

P S 

PLN-45 Series 

E 

• Built-in 


(for 12~36V) 

PLN-100-24 DALI interface 24V, 0~4.0A and push dimming ±3% function 150mV (LCM-40DA/60DA) 88.5% 

Dimension (LxWxH) (mm) 161x 61.5x 35 181x 61.5x 35 

Model No. Output Tol. R&N Effi. • Built-in PLN-100-27 12V/50mA 27V, 0~3.55A auxiliary output ±3% 150mV 88.0% 

PLN-45-12 12V, 0~3.8A ±10% 2.0V 83.5% • Temperature PLN-100-36 compensation 36V, 0~2.65A function ±2% by external 150mVNTC 

88.0% 

P S 

PLN-45-15 15V, 0~3.0A ±10% 2.4V 85.0% 

PLN-100-48 48V, 0~2.0A ±2% 200mV 88.5% 

HLN-40H Series 

E 

(for 48~54V) 

(for 12~42V) 

• No Model load power No. consumption Output


Features 


• Protections: Short circuit / Over current / Over voltage / 

Over temperature (PLP-20 only) 




• Isolation class II, no F.G. for PLP-20 


• Suitable for building in LED lighting systems 


PLP-20 PLP-30 PLP-45/60 

AC input voltage range 90~277VAC; 127~392VDC 90~264VAC; 127~370VDC 




PLP-45: Cold start, 30A at 230VAC 

PLP-60: Cold start, 35A at 230VAC 

Current adjustable range 75%~100% 

Over current Range 95%~110% 100%~110% 

Features 

protection Type Constant current limiting, auto-recovery 



• 2300ms, 200ms at full load 1200ms(setup time) at full load 1000ms(setup time) at full load 

Setup, Protections: rise, hold up time 


and 230VAC, no hold up time and 230VAC, no hold up time and 230VAC, no hold up time 

Short circuit / Over current / Over voltage / Over temperature • Suitable for built-in LED lighting system 

• Withstand Built-in active voltagePFC, PF>0.95 I/P-O/P: 3.75kVAC I/P-O/P: • 3.75kVAC, Built-in 3 I/P-FG: in 1 dimming 2kVAC, O/P-FG: function 0.5kVAC 

• Working Output temperature constant current -30~+60 level adjustable 

O C -30~+70 O C (1~10VDC, (refer to output PWM derating signal, or curve) resistance) 

• Safety Built-in standards constant current UL8750, limiting TUV circuit EN61347-1, (C.V.+C.C. EN61347-2-13 mode) approved • 3 years warranty 

EMC standards 

EN55015, EN61000-3-2 class C, EN61000-3-3, EN61000-4-2,3,4,5,6,8,11, EN61547 

Connection UL1015 HLP-40H 

18AWGx2C (30cm) HLP-60H 3+2P / 3.96mm pitch, JST P/N: B3P / B2P-VH HLP-80H 

Dimension (LxWxH)(mm) 140x 32x 22 101.6x 50.8x 26.6 101.6x 50.8x 29.6 

PLP-20 Series 


PLP-20-12 12V, 0~1.6A ±10% 2.5V 80.0% 

PLP-20-18 18V, 0~1.1A ±10% 3.0V 81.0% 

PLP-45 Series 


(for 12/24V) 


PLP-45-12 12V, 0~3.8A ±10% 4.2V 86% 

PLP-45-24 24V, 0~1.9A ±10% 3.8V 89% 

14 

PLP-20-24 24V, 0~0.8A ±10% 3.0V 82.0% PLP-45-48 48V, 0~0.95A ±10% 4.8V 89% 

AC PLP-20-36 input voltage range 36V, 0~0.55A 90~305VAC ±10% ; 127~431VDC 

3.0V 83.0% 

PLP-20-48 48V, 0~0.42A Cold start, ±10% 3.8V Cold 83.5% start, 


50A at 230VAC 

55A at 230VAC 


PLP-30 DC adjustment Seriesrange 

±10% (for 48V only) rated output (for 12/24V) voltage 

PLP-60 Series 


(for 12/24V) 

Current Model adjustment No. range Output 60%~100% Tol. R&N Effi. Model No. 80%~100% Output Tol. R&N Effi. 

Over PLP-30-12 Features current protection 12V, 0~2.5A 95%~108% ±10% constant 2.0V current 83.0% limiting, auto-recovery 

PLP-60-12 12V, 0~5.0A ±10% 4.5V 84% 

• Over Universal PLP-30-24 voltage AC protection input 24V, (up 0~1.3A to 109%~145% 295VAC) ±10% / Full rated range output 2.4V voltage 85.5% • Class 

PLP-60-24 

2 power unit 

24V, 

/ 

0~2.5A 

Pass LPS 

±10% 4.5V 88% 

• Setup, Protections: rise, hold up time 1000ms, 80ms, 16ms at full load and 230VAC • Cooling by 1000ms, free air 200ms, convection 16ms at full load and 230VAC 

PLP-30-48 48V, 0~0.63A ±10% 4.8V 86.5% PLP-60-48 48V, 0~1.3A ±10% 4.8V 89% 

Withstand Short circuit voltage / Over current I/P-O/P: / Over voltage 3.75kVAC, / Over I/P-FG: temperature 2kVAC, O/P-FG:0.5kVAC 

• Suitable for dry, damp, and wet location 

• Working Built-in ►► Special 

temperature 

active PFC Symbols function, for 

-40~+70 PF>0.9 EN61347-2-13 

O C for (refer 75% of to load output or higher derating • curve) Suitable for LED lighting and moving sign applications 


110 Protection UL8750, against overheating TUV EN61347-1, to prevent EN61347-2-13 the lamp controlgear 


approved; case temperature under any conditions of use from 

• Safety Meet 4kV standards surge immunity exceeding Design 

level the indicated (IEC61000-4-5) 

refer to value EN60335-1(HLP-40H/60H), (110 O C) 

UL60950-1, EN60950-1 

EMC standards F Suitable for EN55015, direct mounting EN61000-3-2 on normally class flammable C, EN61000-3-3, surfaces, such EN61000-4-2,3,4,5,6,8,11, as wood (>2mm) 

EN61547 

CEN-60/75 

CEN-100 

Input 

Connection 

M M Based on 6+6P/3.96mm VDE0710-14, can pitch, be installed JST P/N: inside B6P-VH a wooden material like wooden cabinet. 

Output 

The minimum distance between the product enclosure to wooden material in each side is defined. 

Dimension (LxWxH) INPUT (mm) 147x 53x 27 167x 53x 29.5 

Limited power source 

LPS 

tc: 80 o C 

HLP-40H ta: 40 Series 

o C Full load operation up to 40 O C with surface temperature of case < 80 O (for 48V/54V) 

(for 12~42V) 

C 

OUTPUT 

Model No. 

SELV 

Output Tol. R&N Effi. 

Vo< 120VDC can have this mark on the unit 


HLP-40H-12 12V, 0~3.33A ±2.5% 150mV 87.0% HLP-60H-36 36V, 0~1.70A ±1.0% 200mV 90.0% 




AC inrush current (max.) Cold start, 45A at 230VAC 


DC adjustment range ±10% rated output voltage 

HLP-40H-30 30V, 0~1.34A ±1.0% 200mV 88.5% 

Current adjustment range 75%~100% 65%~100% 

HLP-40H-36 36V, 0~1.12A ±1.0% 200mV 89.0% 

HLP-80H Series 

(for 48V/54V) 

(for 12~42V) 

Over current protection 95%~110% constant current limiting, auto-recovery


Features 



Short circuit / Over current / Over voltage / Over temperature 


• IP67/IP65 design for indoor or outdoor installations 

(except for C-Type) 

• Output current adjustable through output cable or internal 

potentiometer (CLG-150) 

• Class 2 power unit / Pass LPS (CLG-60&100) 


• Suitable for LED lighting, street lighting and moving sign applications 


• Meet 4kV surge immunity level (IEC 61000-4-5) 

• Multiple models for CLG-150 : 

A-Type: IP65 rated. Output voltage and constant current level 

can be adjusted through internal potentiometer 

B-Type: IP67 rated. Constant current level adjustable through 

output cable 

C-Type: Non IP. Terminal block for I/O connection 

Blank-Type: IP67 rated. Cable for I/O connection 


INPUT 

OUTPUT 

CLG-60 CLG-100 CLG-150 

A B C 

Blank 

Class 2 Class 2 

40~60W High Efficiency with PFC 

AC input voltage range 90~295VAC; 127~417VDC 

AC inrush current (max.) Cold start, 35A at 230VAC Cold start, 40A at 230VAC Cold start, 65A at 230VAC 

Fixed. Can be modified between 90%~110% (CLG-60) Can be adjusted between 85%~110% by internal 

DC adjustment range 

Features 

or 85%~100% (CLG-100) rated output voltage potentiometer (A and C-Type) 

Fixed. Can be modified between 75%~103% Can be adjusted between 50%~100% by internal potentiometer 

• Current Universal adjustment AC input range (up to 305VAC) / Full range 

• Meet 4kV surge immunity level (IEC61000-4-5) 

rated output current 

(A and C-Type) or through output cable (B-Type) 


• Class 2 power unit 

95%~110% constant 95%~102% constant 

Over Short current circuit protection / Over current 95%~108% constant current limiting, auto-recovery 

current, / Over auto-recovery 

voltage / Over current, temperature auto-recovery • Multiple models for choice: 

• Over Built-in voltage active protection PFC, PF>0.9 110%~140% for 60% of rated load or output higher voltage A-Type: 110%~145% IP65 rated. rated Output output voltage voltage and constant current level 

• High efficiency up to 90.5% 3000ms(setup time), 1200ms, 80ms, 60ms can be adjusted through internal potentiometer 

Setup, rise, hold up time 

3000ms, 80ms, 50ms at full load and 230VAC 

• IP67 / IP65 design for indoor no hold or outdoor up timeinstallations 

at full load and 230VACB-Type: IP67 rated and built-in 3 in 1 dimming function 

• 

Withstand 

Output current 

voltage 

adjustable 

I/P-O/P: 

through 

3.75kVAC, 

output cable 

I/P-FG: 

or internal 

2kVAC, O/P-FG: 0.5kVAC 

(1~10VDC, PWM signal, or resistance) 

Working temperature 

potentiometer 

-30~+70 O C (refer to output derating curve) 


UL1310, UL8750, UL879, TUV EN61347-1, UL60950-1, UL1012, UL8750, TUV EN60950-1, 


D-Type(option): IP67 rated. Timer dimming function, contact 

EN61347-2-13, PSE J61347-1, 

EN61347-1, EN61347-2-13, PSE J61347-1, 

• Safety Suitable standards for dry, damp, and wet location 

MEAN WELL for details. 

J61347-2-13(option) approved; 

J61347-2-13(option, except for CLG-150 C-Type) 

• Suitable for LED lighting and street lighting applications 


TUV EN60950-1 for CLG-100 only 

approved 

EMC standards 

EN55015, EN55022 class B, EN61000-3-2 class C, EN61000-3-3, EN61000-4-2,3,4,5,6,8,11, EN61547 

HLG-40H 

HLG-60H 

Input UL rated, SJTW 18AWGx3C (30cm) UL rated, SJTW 18AWGx3C (30cm); Terminal block for C type 

Connection 

A & Blank-Type : SJTW 14AWGx2C (30cm) 

Output INPUT UL rated, SVT 18AWGx2C (30cm) 

B-Type: SJTW 14AWGx2C A (30cm)+18AWGx2C B Blank/D (30cm) 

C-Type: Terminal block 

Dimension (LxWxH)(mm) 195.6x 61.5x 38.8 222.2x 68x 38.8 A/B/Blank-Type: 222.2x 68x 38.8; C-Type: 229x 68x 38.8 

Packing OUTPUT 0.86kg ; 16pcs / 14.8kg 1.0kg ; 12pcs / 13kg 1.0kg ; 12pcs / 13kg 

CLG-60 Series 


(for 48V only) (for 12~36V) 

(option) 

CLG-100-27 27V, 0~3.55A ±3% 150mV 88.0% 

AC Model input No. voltage range Output 90~305VAC Tol. ; 127~431VDC 

R&N Effi. 

80~120W High Efficiency with PFC CLG-100-36 36V, 0~2.65A ±2% 150mV 88.0% 

AC CLG-60-12 inrush current 12V, (max.) 0~5.0A Cold ±10% start, 50A at 2.0V 230VAC 85.0% 


CLG-100-48 48V, 0~2.00A ±2% 200mV 88.5% 

DC CLG-60-15 adjustment range 15V, 0~4.0A ±10% ±10% rated output 2.4V voltage (A-Type 86.0% only) 

CLG-60-20 20V, 0~3.0A ±10% 1.8V 87.5% 

Current CLG-150 Series 

CLG-60-24 Features 

adjustment range 60%~100% 

(option) 

24V, 0~2.5A ±10% 2.7V 87.0% 

• Over Universal current Model No. Output Tol. R&N Effi. 

CLG-60-27AC protection input 27V, (up 0~2.3A to 305VAC) 95%~108% 

±10% / Full constant range current limiting, auto-recovery 

2.7V 88.0% • Multiple models for choice: 

• Over Protections: voltage protection 109%~145% rated output voltage A-Type: 

CLG-60-36 36V, 0~1.7A ±10% 3.6V 89.0% 

CLG-150-12 IP65 Arated. 12V, Output 0~11.0A voltage ±2% and constant 150mV current level 88% 



Setup, CLG-60-48 rise, hold 48V, up time 0~1.3A 1000ms, ±10% 80ms, 16ms 4.6V at full 89.0% load and 230VAC CLG-150-15 A 15V, 0~9.50A ±2% 150mV 88% 

• Built-in active PFC, PF>0.9 for 60% of load or higher 

B-Type: IP67 rated and built-in 3 in 1 dimming function 

• Withstand High efficiency voltage up to 93.5% I/P-O/P: 3.75kVAC, I/P-FG: 2kVAC, O/P-FG:0.5kVAC 

CLG-150-20 (1~10VDC, A 20V, PWM 0~7.50A signal, or ±2% resistance) 150mV 90% 

• CLG-150-24 A 24V, 0~6.30A ±1% 150mV 90% 

CLG-100 Working 

IP67 / IP65 

temperature 

design for indoor 

Series 

-40~+70 

or outdoor O C (refer 

installations 

to output derating curve) 


• Output current adjustable through (for 48V only) (for output 12~36V) cable (option) or internal BL-Type(option): CLG-150-30 A 30V, for HLG-80H 0~5.00A B-Type ±1% only, 150mV "UL8750 listed" 91% 

potentiometer 

Safety Model standards No. Output UL8750, Tol. TUV EN61347-1, R&N EN61347-2-13, Effi. 

PSE J61347-1, safety J61347-2-13 & IP66 approved, approved; contact MEAN WELL for 

CLG-150-36 A 36V, 0~4.20A ±1% 150mV 91% 

• Cooling 

CLG-100-12 

by free 

12V, 

air 

0~5.00A 

convection Design ±3% refer to UL60950-1, 150mV 83.0% EN60950-1, EN60335-1 details 

• Suitable for dry, damp, and wet location 

D-Type(option): CLG-150-48 A IP67 48V, rated. 0~3.20A Timer ±1% dimming function, 200mV contact 91% 

• 

EMC 

Suitable 

CLG-100-15 standards 

for LED 

15V, 

lighting 

0~5.00A 

and 

EN55015, 

street 

±3% 

lighting 

EN61000-3-2 150mV 

applications 

class 85.0% C, EN61000-3-3, EN61000-4-2,3,4,5,6,8,11, EN61547 

□= A, B, C or blank MEAN WELL for details 

• Meet CLG-100-20 4kV surge 20V, Input immunity 0~4.80A level UL rated, (IEC61000-4-5) 

±3% SJTW 18AWGx3C 150mV (30cm) 88.5% • Optional 

Connection 

CLG-60-12/24/48, 

CQC models 

CLG-100-12/24/48 

available (HLG-100H/120H-A/Blank 

& CLG-150-12A/24A/36A/ 

type) 

• Class CLG-100-24 2 power unit 24V, Output 0~4.00A / Pass LPS (except 

A/D/Blank-Type: ±3% for HLG-120H) 

150mV SVT 18AWGx2C 88.5% • 5 years 

(30cm); 48A B-Type: are warranty our SVT popular 18AWGx2C models. (30cm)+UL2517 We will keep sufficient 18AWGx2C stock (30cm) for 

prompt delivery of high quantity orders. 

Dimension (LxWxH) (mm) 171x 61.5x 36.8 

HLG-80H 

HLG-100H/HLG-120H 

17 

INPUT 

HLG-40H Series 

(for 48V/54V) 

(for 12~42V) 


HLG-40H-12 AOUTPUT 

12V, 0~3.33A ±2.5% 150mV 86.5% 

HLG-40H-15 A 15V, 0~2.67A ±2.0% 150mV 86.5% 

HLG-40H-20 A 20V, 0~2.00A ±1.0% 150mV 88.0% 


HLG-60H-36 A 36V, 0~1.70A ±1.0% A 200mV B Blank/D 90.0% 

HLG-60H-42 A 42V, 0~1.45A ±1.0% 300mV 90.0% 

HLG-60H-48 A 48V, 0~1.30A ±1.0% 300mV 90.5% 

HLG-60H-54 A 54V, 0~1.15A ±1.0% 300mV 90.5% 

= A, B, D or Blank

150~320W High Efficiency with PFC 

Features 



Short circuit / Over current / Over voltage / Over temp. 

• Built-in active PFC, PF>0.9 for 60% of load or higher 


• IP67 / IP65 design for indoor or outdoor installations 

(except for C-Type) 

• Output current adjustable 


• Suitable for LED lighting and street lighting applications 

• Meet 4kV surge immunity level (IEC61000-4-5) 

• Multiple models for choice: 

A-Type: IP65 rated. Output voltage and constant current level 




C-Type: Terminal block for I/O connection (HLG-240H/320H) 


D-Type(option): IP67 rated. Timer dimming function, contact 

MEAN WELL for details 

• Optional CQC models available (HLG-150H/185H/240H-A/Blank-Type) 


HLG-150H/185H HLG-240H HLG-320H 

INPUT 

A B C 

Blank/D 

OUTPUT 

(HLG-240H/320H) 

20 

AC input voltage range 90~305VAC; 127~431VDC 

AC inrush current 70~200W (max.) Cold Constant start, 65A at 230VAC Current Cold start, with 75A PFC at 230VAC Cold start, 70A at 230VAC 

DC adjustment range ±10% rated output voltage ±6% rated output voltage 

Current adjustment range HLG-150H: 60%~100% ; HLG-185H/240H/320H: 50%~100% 

Over Features current protection 95%~108% constant current limiting, auto-recovery 

• Over Constant voltage current protection output with 110%~140% high output rated voltage>60VDC 

output voltage • Suitable for LED lighting and street lighting applications 

• Setup, Universal rise, AC hold input up time (up to 2500ms, 305VAC)/ 80ms, Full 16ms range 2500ms, 80ms, • 15ms Multiple at full models load for and choice: 230VAC 

Withstand voltage I/P-O/P: 3.75kVAC, I/P-FG: 2kVAC, O/P-FG: 0.5kVAC 


A-Type: IP65 rated. Constant current level can be adjusted 

Working temperature -40~+70 O C (refer to output derating curve) 


through internal potentiometer 

UL8750, TUV EN61347-1, EN61347-2-13, PSE J61347-1, J61347-2-13 (except for C-Type) approved; 

• Safety Protections: standards Short circuit UL1012, / Over voltage UL60950-1, / Over TUV temperature EN60950-1 approved B-Type: for IP67 HLG-240H rated and onlybuilt-in 3 in 1 dimming function 

• EMC Cooling standards by free air convection EN55015, EN55022 class B, EN61000-3-2 class C, EN61000-3-3, (1~10VDC, PWM EN61000-4-2,3,4,5,6,8,11, signal, or resistance) EN61547 

• Output current Input adjustable UL through rated, output SJTW 18AWGx3C cable or internal (30cm); Terminal D-Type block (option): for C-Type IP67 rated. (HLG-240H/320H Timer dimming only) function, 

Connection potentiometer 

A & Blank-Type: SJTW 14AWGx2C (30cm) ; B-Type: SJTW 14AWGx2C contact (30cm)+SJTW MEAN WELL for 18AWGx2C details (30cm); 

Output 

• IP67 / IP65 design for indoor 

C-Type: 

or outdoor 

Terminal 

installations 

block (HLG-240H/320H) 


A/B/D/Blank-Type: A/B/D/Blank-Type: 244.2x 68x 38.8 

• Dimension Suitable for (LxWxH)(mm) 

dry, damp, and wet location 

252x 90x 43.8 

228x 68x 38.8 C-Type: 251x 68x 38.8 

HLG-60H-C HLG-80H-C HLG-120H-C HLG-185H-C 



INPUT 



HLG-150H-12 A 12V, 0~12.5A ±2.5% 150mV 91.5% HLG-240H-12 A 12V, 0~16.0A ±2.5% 150mV 90.0% 


OUTPUT 




AC HLG-150H-36 input voltage A range 36V, 0~4.20A 90~305VAC; ±1.0% 127VDC~431VDC 

200mV 93.5% HLG-240H-36 A 36V, 0~6.70A ±1.0% 250mV 93.0% 

HLG-150H-42 96~150W A 42V, 0~3.60A Wide Input ±1.0% Range 200mV 94.0% with PFCHLG-240H-42 

A 42V, 0~5.72A ±1.0% 250mV 93.0% 

AC 

HLG-150H-48 

inrush current 

A 

(Typ.) 

48V, 0~3.20A 

Cold start, 

±1.0% 

60A at 

200mV 

230VAC 

94.0% HLG-240H-48 

Cold 

A 

start, 

48V, 

70A 

0~5.00A 

at 230VAC 

±1.0% 250mV 93.5% 

Current HLG-150H-54 adjustment A 54V, range0~2.80A 60%~100% ±1.0% 200mV 94.0% HLG-240H-54 50%~100% A 54V, 0~4.45A ±1.0% 350mV 94.0% 

Features = A , B , D or Blank 

= A, B , C , D or Blank 

Short circuit protection Hiccup mode, auto-recovery 

• Wide input range: 180~480VAC for HVG(C)-100 

• Class 2 power unit / Pass LPS for HVG-100 

HLG-185H Over temp. Series protection 180~528VAC 85 O C±10 for HVG(C)-150 

O C(RTH2), shut down o/p voltage, • HLG-320H Suitable re-power for Series dry, on damp, to recover and wet location 

• Protections: Model No. Short circuit Output / Over voltage Tol. / Over R&N temperature Effi. / • Suitable Model for No. LED lighting Output and street lighting Tol. applications 

R&N Effi. 

Withstand 

HLG-185H-12 

voltage Over A current 12V, 0~13.0A (HVG-100/150) 

I/P-O/P:3.75kVAC, 

±2.5% 150mV 

I/P-FG:2kVAC, 

91.5% 

O/P-FG:0.5kVAC 

• Multiple HLG-320H-12 models A for 12V, choice: 0~22.0A ±3.0% 150mV 91.0% 

• Built-in 

Working HLG-185H-15 active 

temperature APFC 

15V, 0~11.5A -40~+70±2.0% O C (refer 150mV to output 92.0% A-Type: 

derating curve) HLG-320H-15 IP65 rated. A 15V, Output 0~19.0A voltage and ±2.0% constant 150mV current 92.5% level 

• High efficiency up to 91.5% 



• Safety IP67 / standards IP65 design UL8750, TUV EN61347-1, EN61347-2-13 B-Type: approved IP67 (HLG-120H-C/185H-C rated and built-in 3 in pending) 1 dimming function 

• Cooling HLG-185H-24 by free Aair convection 

24V, 0~7.80A ±1.0% 150mV 93.5% HLG-320H-24 

(0~10VDC, 

A 24V, 

PWM 

0~13.34A 

signal, or resistance) 

±1.0% 150mV 94.0% 

• EMC C.V. HLG-185H-30 +C.C. standards mode Adesign 30V, (HVG-100/150) 

0~6.20A EN55015, ±1.0% EN61000-3-2 200mV class 93.5% C, EN61000-3-3, D-Type HLG-320H-30 (option): EN61000-4-2,3,4,5,6,8,11, A IP67 30V, rated. 0~10.7A Timer dimming ±1.0% EN61547 200mV function, 94.0% 

• Constant HLG-185H-36 current Adesign 36V, (HVGC-100/150) 

0~5.20A ±1.0% 200mV 93.5% HLG-320H-36 A contact 36V, 0~8.90A MEAN WELL ±1.0% for details 250mV 94.5% 

Input UL rated, SJTW 16AWGx3C(30cm) 

• Output HLG-185H-42 current Aadjustable 42V, 0~4.40A through output ±1.0% cable 200mV or internal 94.0% • 5 HLG-320H-42 years warranty A 42V, 0~7.65A ±1.0% 250mV 95.0% 

potentiometer 

Connection 

HLG-185H-48 A 48V, 0~3.90A A&D-Type: ±1.0% SJTW 16AWGx2C(30cm) 

200mV 94.0% HLG-320H-48 A&D-Type: A 48V, STW 0~6.70A 16AWGx2C(30cm) 

±1.0% 250mV 95.0% 

HLG-185H-54 A Output 54V, 0~3.45A B-Type: ±1.0% SJTW HVG/HVGC-100 

16AWGx2C(30cm)+ 

200mV 94.0% HLG-320H-54 B-Type: A 54V, STW 0~5.95A 16AWGx2C(30cm)+ 

HVG/HVGC-150 

±1.0% 350mV 95.0% 

= A , B , D or Blank 

INPUT 

SJTW 16AWGx2C(30cm) 

= A , B , C , D or SJTW16AWGx2C(30cm) 

Blank 

HLG-185H-12A/24A/48A & HLG-240H-12A/24A/48A are our popular models. We will keep sufficient stock for prompt delivery of high quantity orders. 

Dimension (LxWxH)(mm) 171x 61.5x 36.8 195.6x 61.5x 38.8 220x 68x 38.8 228x 68x 38.8 

NEW 

NEW 

Under 

Development 

Under 

Development 

NEW 

OUTPUT 

HLG-60H-C Series 

HLG-80H-C Series 



AC input voltage range 180~480VAC(single phase); 254~679VDC 180~528VAC (single phase); 254~747VDC 

AC HLG-60H-C350 inrush current A (max.) 100~200V, Cold 350mA start, ±5% 25A at 440VAC 1.0V 91.0% HLG-80H-C350 Cold A start, 167~257V, 35A at 350mA 480VAC±5% 1.0V 91.5%

70W &150W Single Output with PFC / Surge Protection Device 

127.2x 90x 38.8 mm 


Current adjustment range 60%~100% 

Over current protection 


Withstand voltage 



EMC standards 

Connection 

70W Rectangular Metal Case 

Input 

Output 

• Universal AC input (up to 305VAC) 


Short circuit / Over current / 

Over voltage / Over temperature 

• Built-in active PFC 

• Output current adjustable 




• Suitable for LED lighting and 

moving sign applications 


90~305VAC; 127~431VDC 

95%~108% constant current limiting 

112%~140% rated output voltage 

I/P-O/P: 3.75kVAC, 

I/P-FG: 1.88kVAC, O/P-FG: 0.5kVAC 

-40~+70 O C (refer to output derating curve) 

Design refer to EN61347-1, EN61347-2-13 

EN55015, EN61000-3-2 class C, 

EN61000-3-3, EN61547, 

EN61000-4-2,3,4,5,6,8,11 

H05RN-F 1.5mm 2 x2C (30cm) 

H05RN-F 1.0mm 2 x3C (30cm) 


HSG-70-12 12V, 0~5.0A ±2.5% 150mV 88% 

HSG-70-18 18V, 0~4.0A ±2.0% 200mV 89% 

HSG-70-24 24V, 0~3.0A ±1.0% 200mV 89% 

DC-DC Constant Current LED Driver 

HSG-70-36 36V, 0~2.0A ±1.0% 200mV 90% 

HSG-70-48 48V, 0~1.5A ±1.0% 200mV 90% 

150W U-Bracket Single Output with PFC 

215x 67.4x 33 mm 



Overload protection 


Setup, rise, hold up time 

Withstand voltage 



EMC standards 

•Universal AC input (up to 295VAC) 

•Built-in active PFC function 

•High efficiency up to 93% 


Short circuit / Overload / 

Over voltage / Over temperature 

•Constant voltage design 

•Cooling by free air convection 

•U-bracket low profile: 33mm 

•3 years warranty 

90~295VAC; 127~417VDC 


130%~185% hiccup mode, 

auto-recovery 

110%~135% rated output voltage 

2000ms, 100ms, 16ms at full load 

and 230VAC 

I/P-O/P: 3.75kVAC, 

I/P-FG: 1.88kVAC, O/P-FG: 0.5kVAC 

-30~+70 O C 

(refer to output derating curve) 

Design refer to UL8750, 

EN61347-1, EN61347-2-13 

EN55015, EN61000-3-2 class C, 

EN61000-3-3, EN61547, 

EN61000-4-2,3,4,5,6,8,11 


ULP-150-12 12V, 0~12.5A ±2% 100mV 91.5% 

ULP-150-15 15V, 0~10.0A ±2% 150mV 91.5% 

ULP-150-24 24V, 0~6.30A ±2% 150mV 93.0% 

ULP-150-36 36V, 0~4.20A ±2% 250mV 93.0% 

ULP-150-48 48V, 0~3.20A ±2% 250mV 93.0% 

Features 

20kA Surge Protection Device 

•Constant current LED driver 

•Compact size 

• Wide input and output voltage range 

• Operating temperature range: -40~+85 

Features 

o C 

•High efficiency up to 97% 

• UL1449 3 rd •Cooling by free air convection 

Edition, 

•IP67 design 

• Comply with EN55015 and FCC part 15 without additional • Fully enclosed plastic case (UL 94V-0) 

Type 2 component assemblies 

• Suitable for surge protection of 

input filter and capacitors 

•Low cost, high reliability 

•Built-in PWM dimming and remote ON/OFF control • Line to Ground &•3 Line years to Line warranty protected LED drivers 

• Protections: Short circuit / Over temperature • Parallel (3 wires) connection style 

90x 70x 50 mm 

•LED status indicators 

LDD-H / HW / HS 

LDD-L / LW / LS 

Model No. SPD-20-240P SPD-20-277P 

Operating voltage 240VAC, 50/60Hz 277VAC, 50/60Hz 

MCOV (Max. Continuous Operating Voltage) 300VAC 320VAC 

VPR (Voltage Protection Rating) 

IN (Nominal Discharge Current) 

≤1200 (L-FG, N-FG, L-N) 

5kA 

Max. Surge Current (8/20μs) 

20kA 

±3% at 24VDC input; 

SCCR (Short Circuit Current Rating) 

5kA 

Output Current Accuracy ±4% at 48VDC input for LDD-H/HW; 

±5% at 24VDC input 

Response time 

2.5~6VDC or open circuit 

DIM~-Vin>3.5~8VDC or open circuit 

& Connection ON/OFF 

N (White) FEP 10AWG (15cm) 

Control 

Power OFF: DIM~-Vin

NEW 

NEW 

Under 

96~240W Circular Shape for High Bay Lighting 

Description 

HBG series are high performance LED power supplies specially designed for the high/low bay lighting and spot lighting applications. 

Featuring with circular shape, these new series are easy to be assembled and perfectly fit in with the mechanical structure of high/ 

low bay lighting fixtures. Fully potted by glue, their aluminum enclosure can be tightly assembled to the heat sink of lighting 

fixtures and provide excellent heat dissipation ability, which solve the mechanism limits of old style bay lighting systems using slim 

shape LED power supplies. As long as the temperature on the top of the enclosure can be controlled under 70 o C, the power supply 

service life could be guaranteed up to 40,000 hours. 

For more detail information, please visit our website: www.meanwell.com/product/HBG/HBG.html 

HBG-100 HBG-160 HBG-240 

Development 

DxH: 

130x 66.5mm 

DxH: 

151.68x 66.5mm 

DxH: 

191.5x 69mm 

Features 

•Universal AC input (90~305VAC) 

•Built-in active PFC function 

•High efficiency up to 93.5% 

•Protections: 


•Output current adjustable through internal potentiometer 

•IP67 / IP65 design for indoor or outdoor installations 

•Suitable for dry, damp, and wet location 

HBG-100 Series 

Model No. Output Tol. Effi. 

HBG-100-24 A 24V, 0~4.0A ±1% 90.5% 

HBG-100-36 A 36V, 0~2.7A ±1% 91.0% 

HBG-100-48 A 48V, 0~2.0A ±1% 91.0% 

HBG-100-60 A 60V, 0~1.6A ±1% 91.5% 

= A, B, E or Blank 



HBG-160-24 A 24V, 0~6.5A ±1% 92.0% 

HBG-160-36 A 36V, 0~4.4A ±1% 92.0% 

► 

Construction of High Bay Light 

UL/CUL/TUV/CB/CE pending 


•Multiple models for choice: 

A-Type: IP65 rated. Constant current level can be adjusted 





E-Type(option): IP67 rated. Can be mounted on metal frame, 

contact MEAN WELL for details 

•5 years warranty 


HBG-160-48 A 48V, 0~3.3A ±1% 93.0% 

HBG-160-60 A 60V, 0~2.6A ±1% 93.5% 

= A, B, E or Blank 




HBG-240-24 A 24V, 0~10A ±1% 92.5% 

HBG-240-36 A 36V, 0~6.7A ±1% 92.5% 

HBG-240-48 A 48V, 0~5.0A ±1% 93.0% 

HBG-240-60 A 60V, 0~4.0A ±1% 93.5% 

= A, B or Blank 

Ring HBG Series Heat Sink Light Source lampshade High Bay Light 

+ + + + 

► 

Installations 

Spot Light Stage Light High Bay Light 

Chain Type 

Hanger Type 

25

LDB60 

60W Constant Current/ 

Constant Voltage 

218 x 40 x 28mm 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

-30 to 50 

LDV75 

75W Constant Voltage 

218 x 40 x 28mm 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

-30 to 50 

-30 to 50 

LDB75 

75W Constant Voltage/ 

Constant Current 

218 x 40 x 28mm 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

-30 to 50 

-30 to 50 

-30 to 50 

-30 to 50 

LDV100 


218 x 40 x 28mm 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

-30 to 50 

-30 to 50

LDB100 



218 x 40 x 28mm 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

-30 to 50 

-30 to 50 

-30 to 50 

-30 to 50 

LDD100 

100W Dimming 

218 x 40 x 28mm 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

-30 to 50 

-30 to 50 

-30 to 50 

-30 to 50 

-30 to 50 

Refer to page 16 for additional information on Dimming Control 

LDB150 



218 x 63 x 40mm 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

-30 to 50 

-30 to 50 

-30 to 50 

-30 to 50 

LDB200 



218 x 63 x 40mm 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

-30 to 50 

-30 to 50 

-30 to 50 

-30 to 50


LXD35 

35W Dimming 

172 x 42.5 x 34.5mm 

87K hour lifetime 

Temp range -35 to 55 

Up to 88% efficient 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

LXD50 

50W Dimming 

172 x 42.5 x 34.5mm 




 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

LXD75 

75W Dimming 

150 x 67.5 x 37mm 



Up to 92% efficient


LXD85 

85W Dimming 

150 x 67.5 x 37mm 




 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

LXD96 

96W Dimming 

174 x 67.5 x 37mm 




 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

LXD100 

100W Dimming 

194 x 67.5 x 37mm 



Up to 91% efficient


LXD120 

120W Dimming 

194 x 67.5 x 37mm 




 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

LXD150 

150W Dimming 

235 x 79.5 x 46mm 



Up to 93.5% efficient 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

LXD200 

200W Dimming 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

235 x 79.5 x 46mm 



Up to 93.5% efficient

LXC30 

30W Constant Current 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

162 x 42.5 x 34.5mm 




 

 

 

 

 

 

 

LXC30 does not meet EN61000-3-2 Class C limit 

LXC35 


 

 

 

 

 

 

 

 

 

 

 

 

 

 

172 x 42.5 x 34.5mm 




 

 

 

 

 

 

 

 

 

LXC50 


 

 

 

 

 

 

 

 

 

 

 

 

 

 

162 x 42.5x 34.5mm 




 

 

 

 

 

 

 

 

 

LXC50 does not meet EN61000-3-2 Class C limit

LXC50 SW 


 

 

 

 

 

 

 

 

 

 

 

 

 

 

172 x 42.5 x 34.5mm 




LXC60 


150 x 67.5 x 37mm 




LXC75 


150 x 67.5 x 37mm 




LXC85 


150 x 67.5 x 37mm 



Up to 91% efficient

LXC96 


 

 

 

 

 

 

 

 

 

 

 

 

 

 

174 x 67.5 x 37mm 




 

 

 

 

 

 

 

 

 

 

 

 

LXC100 


 

 

 

 

 

 

 

 

 

 

 

 

 

 

194 x 67.5 x 37mm 




 

 

 

 

 

 

 

 

 

 

 

 

LXC120 


 

 

 

 

 

 

 

 

 

 

 

 

 

 

194 x 67.5 x 37mm 



Up to 91% efficient

LXC150 


 

 

 

 

 

 

 

 

 

 

 

 

 

 

238 x 79.5 x 46mm 




 

 

 

 

 

 

 

 

 

 

 

 

 

 

LXC200 


 

 

 

 

 

 

 

 

 

 

 

 

 

 

238 x 79.5 x 46mm 



Up to 92% efficient

LXV35 


 

 

 

 

 

 

 

 

 

 

 

 

 

 

172 x 42.5 x 34.5mm 




 

 

 

 

 

LXV50 


 

 

 

 

 

 

 

 

 

 

 

 

 

 

172 x 42.5 x 34.5mm 




 

 

 

 

 

LXV75 


 

 

 

 

 

 

 

 

 

 

 

 

 

 

184 x 67.5 x 37mm 




 

 

 

 

 

 

 

 

90-264VAC models available. SW suffix for 90-305VAC input. S suffix for 90-264VAC input.

LXV76 


 

 

 

 

 

 

 

 

 

 

 

 

 

 

150 x 67.5 x 37mm 




 

 

 

 

 

 

LXV96 


 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

174 x 67.5 x 37mm 




LXV100 


 

 

 

 

 

 

 

 

 

 

 

 

 

 

184 x 67.5 x 37mm 




 

 

 

 

 

 

 

 

90-264VAC models available. SW suffix for 90-305VAC input. S suffix for 90-264VAC input. 

LXV150 


 

 

 

 

 

 

 

 

 

 

 

 

 

 

199 x 67.5 x 40mm 




 

 

 

 

 

 

 

 

 

 

 

 

90-264VAC models available. SW suffix for 90-305VAC input. S suffix for 90-264VAC input.

LXV200 


 

 

 

 

 

 

 

 

 

 

 

 

 

 

199 x 67.5 x 40mm 




 

 

 

 

 

 

 

 

 

 

90-264VAC models available. SW suffix for 90-305VAC input. S suffix for 90-264VAC input. 

LXV250 


 

 

 

 

 

 

 

 

 

 

 

 

 

 

224 x 88 x 33mm 




 

 

 

 

 

 

 

 

 

 

 

 

 

LXV300 


 

 

 

 

 

 

 

 

 

 

 

 

 

 

223 x 98 x 44.5mm 



Up to 94% efficient

LXC75-H 


 

 

 

 

 

 

 

 

 

 

 

 

 

 

188 x 88 x 39mm 




 

 

 

 

 

 

 

LXC150-H 


 

 

 

 

 

 

 

 

 

 

 

 

 

 

188 x 93.9 x 44.5mm 




 

 

 

 

 

 

 

 

 

LXV300-H 


 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

224 x 93.6 x 44.5mm 



Up to 89% efficient

Zusatzinformationen 

Kabel, Sensoren & 

Zubehör

connector system 

steckersysteM 

easy connect 

Artikelbez. 

discription 

Verbindungskabel 

2 Adrig 

männchen/weibchen 

Plug to Outlet 

Art.-Nr. 

part.-no. 

Länge 

length 

Farbe 

color 

400100 0,5m black 

400101 1m black 

400102 1,5m black 

400103 2m black 

400104 0,5m white 

400105 1m white 

400106 1,5m white 

400107 2m white 

Artikelbez. 

discription 


2 Adrig 

männchen 

Outlet to Pigtail 

Art.-Nr. 

part.-no. 

Länge 

length 

Farbe 

color 

400108 0,5m black 

400109 1m black 

400110 1,5m black 

400111 2m black 

400112 0,5m white 

400113 1m white 

400114 1,5m white 

400115 2m white 

Artikelbez. 

discription 


2 Adrig 

weibchen 

Plug to Pigtail 

Art.-Nr. 

part.-no. 

Länge 

length 

Farbe 

color 

400116 0,5m black 

400117 1m black 

400118 1,5m black 

400119 2m black 

400120 0,5m white 

400121 1m white 

400122 1,5m white 

400123 2m white 

Für Montage- und Sicherheitshinweise siehe www.ledxon.de/downloads / For assembly- and safety information see www.ledxon.com/downloads


steckersysteM 

easy connect 

Artikelbez. 

discription 


4 Adrig 

männchen/weibchen 

Plug to Outlet 

Art.-Nr. 

part.-no. 

Länge 

length 

Farbe 

color 

400124 0,5m black 

400125 1m black 

400126 1,5m black 

400127 2m black 

400128 0,5m white 

400129 1m white 

400130 1,5m white 

400131 2m white 

Artikelbez. 

discription 


4 Adrig 

männchen 

Outlet to Pigtail 

Art.-Nr. 

part.-no. 

Länge 

length 

Farbe 

color 

400132 0,5m black 

400133 1m black 

400134 1,5m black 

400135 2m black 

400136 0,5m white 

400137 1m white 

400138 1,5m white 

400139 2m white 

Artikelbez. 

discription 


4 Adrig 

weibchen 

Plug to Pigtail 

Art.-Nr. 

part.-no. 

Länge 

length 

Farbe 

color 

400140 0,5m black 

400141 1m black 

400142 1,5m black 

400143 2m black 

400144 0,5m white 

400145 1m white 

400146 1,5m white 

400147 2m white 



steckersysteM 

easy connect 

Artikelbez. 

discription 

6- fach Verteilerbox 

6 Way Distributor Pigtail 

Art.-Nr. 

part.-no. 

Länge 

length 

Farbe 

color 

400148 1m black 

400149 1m white 

Artikelbez. 

discription 

6- fach Verteilerbox mit 

Schaltfunktion 

6 Way Distributor Pigtail 

(switchable) 

Art.-Nr. 

part.-no. 

Länge 

length 

Farbe 

color 

400150 1m black 

400151 1m white 

Artikelbez. 

discription 

IP65 Schutztülle 

IP Boot 

Art.-Nr. 

part.-no. 

Länge 

length 

Farbe 

color 

400152 - transparent 

Artikelbez. 

discription 

Parallel Splitter 

Splitter Parallel 

Art.-Nr. 

part.-no. 

Länge 

length 

Farbe 

color 

400153 - white 



steckersysteM 

easy connect 

Artikelbez. 

discription 

Wandbuchse 

Chassis Mount Frame 

Art.-Nr. 

part.-no. 

Länge 

length 

Farbe 

color 

400154 - white 

Artikelbez. 

discription 

Bus Stecker mit Halterung 

Bus Bar With Fixing Hook 

Art.-Nr. 

part.-no. 

Länge 

length 

Farbe 

color 

400155 - white 

Artikelbez. 

discription 

2 poliger Quetschverbinder 

Splice Connector 

Art.-Nr. 

part.-no. 

Länge 

length 

Farbe 

color 

400156 - white 



10-fach Verteilerbox, parallel 

Eingangsspannung 

Stromstärke 

Maße (L x B x H) 

Gewicht 

Steckersystem 

Gehäuse 

Artikelnummer 

6 - 24 V DC 

max. 9 A, 3 A pro Ausgang 

50 x 30 x 14 mm 

27 g 

XHP-Stecksystem 

Kunststoff 

0540GU0009 



Stromstärke 


Gewicht 

Steckersystem 

Gehäuse 

Artikelnummer 

6 - 24 V DC 

max. 8 A, 1,5 A pro Ausgang 

100 x 55 x 8,8 mm 

30 g 

LED-Stecker 

Kunststoff 

0540GU0007 (schwarz) 

0540GU0005 (weiß) 



Stromstärke 


Gewicht 

Steckersystem 

Gehäuse 

Artikelnummer 

6 - 24 V DC 


55 x 38 x 8,8 mm 

24 g 


Kunststoff 


0540GU0001 (weiß) 

71


10-fach Verteilerbox, seriell 


Stromstärke 


Gewicht 

Steckersystem 

Gehäuse 

Artikelnummer 

6 - 24 V DC 

max. 9 A, 3 A pro Ausgang 

50 x 30 x 14 mm 

25 g 

XHP-Stecker 

Kunststoff 

0540GU0010 



Stromstärke 


Gewicht 

Steckersystem 

Gehäuse 

Artikelnummer 

6 - 24 V DC 


100 x 55 x 8,8 mm 

34,5 g 


Kunststoff 


0540GU0006 (weiß) 



Stromstärke 


Gewicht 

Steckersystem 

Gehäuse 

Artikelnummer 

6 - 24 V DC 


55 x 38 x 8,8 mm 

29,5 g 


Kunststoff 


0540GU0002 (weiß) 

72


IP67-Kabelset für flexible LED-Streifen 

Kabelquerschnitt 

AWG20 

max. Stromstärke 

3 A 

Länge 

150 mm 

Farbe 

weiß 

Artikelnummer 0570110002 

IP67-Kabelset für flexible RGB LED-Streifen 

Kabelquerschnitt 

AWG20 


3 A 

Länge 

150 mm 

Farbe 

RGB 


73

Zubehör für flexible LED-Streifen 

Steckverbinder - 2-polig - 8 mm 

Material 

Kunststoff 


15,4 x 12,2 x 4,6 mm 


6 A 

Farbe 

weiß 

Beschreibung 

passend für LED-Streifen, 8 mm, bis 60 LED/m 



Material 

Kunststoff 


15,4 x 12,2 x 4,6 mm 


6 A 

Farbe 

weiß 

Beschreibung 




Material 



Farbe 

Beschreibung 

Kunststoff 

15,4 x 12,2 x 4,6 mm 

6 A 

weiß 



74


Anschlusskabel - 2-polig - 8 mm 

Material 

Kunststoff 


15,4 x 12,2 x 4,6 mm 


6 A 

Kabellänge 

160 mm 

Farbe 

rot-schwarz 

Beschreibung 

passend für LED-Streifen, 8 mm, 60 LED/m 


Verbinderkabel - 2-polig - 8 mm 

Material 

Kunststoff 


15,4 x 12,2 x 4,6 mm 


6 A 

Kabellänge 

150 mm 

Farbe 

weiß 

Beschreibung 



Verbinderkabel - 4-polig - 10 mm 

Material 

Kunststoff 


15,4 x 12,2 x 4,6 mm 


6 A 

Kabellänge 

150 mm 

Farbe 

RGB 

Beschreibung 



Befestigung für LED-Streifen 

Material 

Menge 

Artikelnummer 

Kunststoff 

10 Stück je Set 

0020120067 (für 8 mm LED-Streifen) 



75

LED-Sensoren 

Schalter mit Berührungssensor - 230 V 

Betriebsspannung 

220 - 240 V AC, 50 Hz 

Stromstärke 

2,5 A 

Leistungsaufnahme 

550 W 

Anschlüsse 

Schraubklemme mit Zugentlastung 

Gehäuse 

Kunststoff 


95 x 55 x 18 mm 

Beschreibung 

inkl. 3 Sensoren 


Schalter mit Berührungssensor - 12 V 


12 V DC 

Stromstärke 

2,5 A 


30 W 

Anschlüsse 

Schraubklemme mit Zugentlastung 

Gehäuse 

Kunststoff 


95 x 55 x 18 mm 

Beschreibung 

inkl. 3 Sensoren 


Optischer Näherungsschalter 


Stromstärke 


Gehäuse 


Beschreibung 

Artikelnummer 

12 V DC 

1,25 A 

15 W @ 12 V DC / 30 W @ 24 V DC 

Kunststoff 

63 x 10,8 x 11,8 mm 

Modus 1: monostabil 

Modus 2: bistabil 

umschaltbar 

0650SE0001 

58

LED-Sensoren 

Berührungssensor - 1,5 A - Schalter 


24 V DC 

Stromstärke 

1,5 A 


36 W 

Anschlüsse 

offene Kabelenden 

Gehäuse 

Aluminium 


45 x 31 x 12 mm 

Funktion 

Ein/Aus 


Berührungssensor - 1,5 A - Dimmer 


24 V DC 

Stromstärke 

1,5 A 


36 W 

Anschlüsse 


Gehäuse 

Aluminium 


45 x 31 x 12 mm 

Funktion 

Stufenlos dimmen (3-96%), Ein/Aus 


Berührungssensor - 10 A - Schalter 


Stromstärke 


Anschlüsse 

Gehäuse 


Funktion 

Artikelnummer 

24 V DC 

10 A 

240 W 


Kunststoff 

86 x 51 x 25 mm 

Ein/Aus 

0640270005 (24 V DC) 

Berührungssensor - 10 A - Dimmer 


Stromstärke 


Anschlüsse 

Gehäuse 


Funktion 

Artikelnummer 

12 V / 24 V DC 

10 A 

120 W @ 12 V DC / 240 W @ 24 V DC 


Kunststoff 

86 x 51 x 25 mm 

Stufenlos dimmen (3-96%), Ein/Aus 

0640270007 (12 V DC) 

0640270006 (24 V DC) 

59

Leeren Teich 13 

33154 Salzkotten 

Tel. +49 5258 / 93 51 343 

Fax +49 5258 / 93 51 682 

www.creative-led.com 

www.will-licht.de

LED Konverter/Treiber & Zubehör

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?