LED Konverter/Treiber & Zubehör

More documents

Recommendations

Info

20~60W Single Output with PFC Features • Universal AC input / Full range • Protections: Short circuit / Over current / Over voltage / Over temperature (PLP-20 only) • Built-in active PFC function, PF>0.9 for 75% of load or higher • Cooling by free air convection • Class 2 power unit / Pass LPS • Isolation class II, no F.G. for PLP-20 • Built-in constant current limiting circuit (C.V.+C.C. mode) • Suitable for building in LED lighting systems • 2 years warranty PLP-20 PLP-30 PLP-45/60 AC input voltage range 90~277VAC; 127~392VDC 90~264VAC; 127~370VDC AC inrush current (max.) Cold start, 25A at 230VAC 40~80W Single Output with PFC PLP-45: Cold start, 30A at 230VAC PLP-60: Cold start, 35A at 230VAC Current adjustable range 75%~100% Over current Range 95%~110% 100%~110% Features protection Type Constant current limiting, auto-recovery • Universal AC input (up to 305VAC) / Full range • Class 2 power unit / Pass LPS • 2300ms, 200ms at full load 1200ms(setup time) at full load 1000ms(setup time) at full load Setup, Protections: rise, hold up time • Cooling by free air convection and 230VAC, no hold up time and 230VAC, no hold up time and 230VAC, no hold up time Short circuit / Over current / Over voltage / Over temperature • Suitable for built-in LED lighting system • Withstand Built-in active voltagePFC, PF>0.95 I/P-O/P: 3.75kVAC I/P-O/P: • 3.75kVAC, Built-in 3 I/P-FG: in 1 dimming 2kVAC, O/P-FG: function 0.5kVAC • Working Output temperature constant current -30~+60 level adjustable O C -30~+70 O C (1~10VDC, (refer to output PWM derating signal, or curve) resistance) • Safety Built-in standards constant current UL8750, limiting TUV circuit EN61347-1, (C.V.+C.C. EN61347-2-13 mode) approved • 3 years warranty EMC standards EN55015, EN61000-3-2 class C, EN61000-3-3, EN61000-4-2,3,4,5,6,8,11, EN61547 Connection UL1015 HLP-40H 18AWGx2C (30cm) HLP-60H 3+2P / 3.96mm pitch, JST P/N: B3P / B2P-VH HLP-80H Dimension (LxWxH)(mm) 140x 32x 22 101.6x 50.8x 26.6 101.6x 50.8x 29.6 PLP-20 Series Model No. Output Tol. R&N Effi. PLP-20-12 12V, 0~1.6A ±10% 2.5V 80.0% PLP-20-18 18V, 0~1.1A ±10% 3.0V 81.0% PLP-45 Series (for 48V only) (for 12/24V) Model No. Output Tol. R&N Effi. PLP-45-12 12V, 0~3.8A ±10% 4.2V 86% PLP-45-24 24V, 0~1.9A ±10% 3.8V 89% 14 PLP-20-24 24V, 0~0.8A ±10% 3.0V 82.0% PLP-45-48 48V, 0~0.95A ±10% 4.8V 89% AC PLP-20-36 input voltage range 36V, 0~0.55A 90~305VAC ±10% ; 127~431VDC 3.0V 83.0% PLP-20-48 48V, 0~0.42A Cold start, ±10% 3.8V Cold 83.5% start, AC inrush current (max.) 50A at 230VAC 55A at 230VAC 60~96W Single Output with PFC PLP-30 DC adjustment Seriesrange ±10% (for 48V only) rated output (for 12/24V) voltage PLP-60 Series (for 48V only) (for 12/24V) Current Model adjustment No. range Output 60%~100% Tol. R&N Effi. Model No. 80%~100% Output Tol. R&N Effi. Over PLP-30-12 Features current protection 12V, 0~2.5A 95%~108% ±10% constant 2.0V current 83.0% limiting, auto-recovery PLP-60-12 12V, 0~5.0A ±10% 4.5V 84% • Over Universal PLP-30-24 voltage AC protection input 24V, (up 0~1.3A to 109%~145% 295VAC) ±10% / Full rated range output 2.4V voltage 85.5% • Class PLP-60-24 2 power unit 24V, / 0~2.5A Pass LPS ±10% 4.5V 88% • Setup, Protections: rise, hold up time 1000ms, 80ms, 16ms at full load and 230VAC • Cooling by 1000ms, free air 200ms, convection 16ms at full load and 230VAC PLP-30-48 48V, 0~0.63A ±10% 4.8V 86.5% PLP-60-48 48V, 0~1.3A ±10% 4.8V 89% Withstand Short circuit voltage / Over current I/P-O/P: / Over voltage 3.75kVAC, / Over I/P-FG: temperature 2kVAC, O/P-FG:0.5kVAC • Suitable for dry, damp, and wet location • Working Built-in ►► Special temperature active PFC Symbols function, for -40~+70 PF>0.9 EN61347-2-13 O C for (refer 75% of to load output or higher derating • curve) Suitable for LED lighting and moving sign applications • IP66 design 110 Protection UL8750, against overheating TUV EN61347-1, to prevent EN61347-2-13 the lamp controlgear • 3 years warranty approved; case temperature under any conditions of use from • Safety Meet 4kV standards surge immunity exceeding Design level the indicated (IEC61000-4-5) refer to value EN60335-1(HLP-40H/60H), (110 O C) UL60950-1, EN60950-1 EMC standards F Suitable for EN55015, direct mounting EN61000-3-2 on normally class flammable C, EN61000-3-3, surfaces, such EN61000-4-2,3,4,5,6,8,11, as wood (>2mm) EN61547 CEN-60/75 CEN-100 Input Connection M M Based on 6+6P/3.96mm VDE0710-14, can pitch, be installed JST P/N: inside B6P-VH a wooden material like wooden cabinet. Output The minimum distance between the product enclosure to wooden material in each side is defined. Dimension (LxWxH) INPUT (mm) 147x 53x 27 167x 53x 29.5 Limited power source LPS tc: 80 o C HLP-40H ta: 40 Series o C Full load operation up to 40 O C with surface temperature of case < 80 O (for 48V/54V) (for 12~42V) C OUTPUT Model No. SELV Output Tol. R&N Effi. Vo< 120VDC can have this mark on the unit Model No. Output Tol. R&N Effi. HLP-40H-12 12V, 0~3.33A ±2.5% 150mV 87.0% HLP-60H-36 36V, 0~1.70A ±1.0% 200mV 90.0% HLP-40H-15 15V, 0~2.67A ±2.0% 150mV 87.0% HLP-60H-42 42V, 0~1.45A ±1.0% 300mV 90.0% AC input voltage range 90~295VAC ; 127~417VDC HLP-40H-20 20V, 0~2.00A ±1.0% 150mV 88.0% HLP-60H-48 48V, 0~1.30A ±1.0% 300mV 90.5% AC inrush current (max.) Cold start, 45A at 230VAC HLP-40H-24 24V, 0~1.67A ±1.0% 150mV 88.0% HLP-60H-54 54V, 0~1.15A ±1.0% 300mV 90.5% DC adjustment range ±10% rated output voltage HLP-40H-30 30V, 0~1.34A ±1.0% 200mV 88.5% Current adjustment range 75%~100% 65%~100% HLP-40H-36 36V, 0~1.12A ±1.0% 200mV 89.0% HLP-80H Series (for 48V/54V) (for 12~42V) Over current protection 95%~110% constant current limiting, auto-recovery
60~150W Single Output with PFC Features • Universal AC input (up to 295VAC) / Full range • Protections: Short circuit / Over current / Over voltage / Over temperature • Built-in active PFC function, PF>0.9 for 75% of load or higher • IP67/IP65 design for indoor or outdoor installations (except for C-Type) • Output current adjustable through output cable or internal potentiometer (CLG-150) • Class 2 power unit / Pass LPS (CLG-60&100) • Cooling by free air convection • Suitable for LED lighting, street lighting and moving sign applications • Built-in constant current limiting circuit (C.V.+C.C. mode) • Meet 4kV surge immunity level (IEC 61000-4-5) • Multiple models for CLG-150 : A-Type: IP65 rated. Output voltage and constant current level can be adjusted through internal potentiometer B-Type: IP67 rated. Constant current level adjustable through output cable C-Type: Non IP. Terminal block for I/O connection Blank-Type: IP67 rated. Cable for I/O connection • 3 years warranty INPUT OUTPUT CLG-60 CLG-100 CLG-150 A B C Blank Class 2 Class 2 40~60W High Efficiency with PFC AC input voltage range 90~295VAC; 127~417VDC AC inrush current (max.) Cold start, 35A at 230VAC Cold start, 40A at 230VAC Cold start, 65A at 230VAC Fixed. Can be modified between 90%~110% (CLG-60) Can be adjusted between 85%~110% by internal DC adjustment range Features or 85%~100% (CLG-100) rated output voltage potentiometer (A and C-Type) Fixed. Can be modified between 75%~103% Can be adjusted between 50%~100% by internal potentiometer • Current Universal adjustment AC input range (up to 305VAC) / Full range • Meet 4kV surge immunity level (IEC61000-4-5) rated output current (A and C-Type) or through output cable (B-Type) • Protections: • Class 2 power unit 95%~110% constant 95%~102% constant Over Short current circuit protection / Over current 95%~108% constant current limiting, auto-recovery current, / Over auto-recovery voltage / Over current, temperature auto-recovery • Multiple models for choice: • Over Built-in voltage active protection PFC, PF>0.9 110%~140% for 60% of rated load or output higher voltage A-Type: 110%~145% IP65 rated. rated Output output voltage voltage and constant current level • High efficiency up to 90.5% 3000ms(setup time), 1200ms, 80ms, 60ms can be adjusted through internal potentiometer Setup, rise, hold up time 3000ms, 80ms, 50ms at full load and 230VAC • IP67 / IP65 design for indoor no hold or outdoor up timeinstallations at full load and 230VACB-Type: IP67 rated and built-in 3 in 1 dimming function • Withstand Output current voltage adjustable I/P-O/P: through 3.75kVAC, output cable I/P-FG: or internal 2kVAC, O/P-FG: 0.5kVAC (1~10VDC, PWM signal, or resistance) Working temperature potentiometer -30~+70 O C (refer to output derating curve) Blank-Type: IP67 rated. Cable for I/O connection UL1310, UL8750, UL879, TUV EN61347-1, UL60950-1, UL1012, UL8750, TUV EN60950-1, • Cooling by free air convection D-Type(option): IP67 rated. Timer dimming function, contact EN61347-2-13, PSE J61347-1, EN61347-1, EN61347-2-13, PSE J61347-1, • Safety Suitable standards for dry, damp, and wet location MEAN WELL for details. J61347-2-13(option) approved; J61347-2-13(option, except for CLG-150 C-Type) • Suitable for LED lighting and street lighting applications • 5 years warranty TUV EN60950-1 for CLG-100 only approved EMC standards EN55015, EN55022 class B, EN61000-3-2 class C, EN61000-3-3, EN61000-4-2,3,4,5,6,8,11, EN61547 HLG-40H HLG-60H Input UL rated, SJTW 18AWGx3C (30cm) UL rated, SJTW 18AWGx3C (30cm); Terminal block for C type Connection A & Blank-Type : SJTW 14AWGx2C (30cm) Output INPUT UL rated, SVT 18AWGx2C (30cm) B-Type: SJTW 14AWGx2C A (30cm)+18AWGx2C B Blank/D (30cm) C-Type: Terminal block Dimension (LxWxH)(mm) 195.6x 61.5x 38.8 222.2x 68x 38.8 A/B/Blank-Type: 222.2x 68x 38.8; C-Type: 229x 68x 38.8 Packing OUTPUT 0.86kg ; 16pcs / 14.8kg 1.0kg ; 12pcs / 13kg 1.0kg ; 12pcs / 13kg CLG-60 Series Model No. Output Tol. R&N Effi. (for 48V only) (for 12~36V) (option) CLG-100-27 27V, 0~3.55A ±3% 150mV 88.0% AC Model input No. voltage range Output 90~305VAC Tol. ; 127~431VDC R&N Effi. 80~120W High Efficiency with PFC CLG-100-36 36V, 0~2.65A ±2% 150mV 88.0% AC CLG-60-12 inrush current 12V, (max.) 0~5.0A Cold ±10% start, 50A at 2.0V 230VAC 85.0% Cold start, 55A at 230VAC CLG-100-48 48V, 0~2.00A ±2% 200mV 88.5% DC CLG-60-15 adjustment range 15V, 0~4.0A ±10% ±10% rated output 2.4V voltage (A-Type 86.0% only) CLG-60-20 20V, 0~3.0A ±10% 1.8V 87.5% Current CLG-150 Series CLG-60-24 Features adjustment range 60%~100% (option) 24V, 0~2.5A ±10% 2.7V 87.0% • Over Universal current Model No. Output Tol. R&N Effi. CLG-60-27AC protection input 27V, (up 0~2.3A to 305VAC) 95%~108% ±10% / Full constant range current limiting, auto-recovery 2.7V 88.0% • Multiple models for choice: • Over Protections: voltage protection 109%~145% rated output voltage A-Type: CLG-60-36 36V, 0~1.7A ±10% 3.6V 89.0% CLG-150-12 IP65 Arated. 12V, Output 0~11.0A voltage ±2% and constant 150mV current level 88% Short circuit / Over current / Over voltage / Over temperature can be adjusted through internal potentiometer Setup, CLG-60-48 rise, hold 48V, up time 0~1.3A 1000ms, ±10% 80ms, 16ms 4.6V at full 89.0% load and 230VAC CLG-150-15 A 15V, 0~9.50A ±2% 150mV 88% • Built-in active PFC, PF>0.9 for 60% of load or higher B-Type: IP67 rated and built-in 3 in 1 dimming function • Withstand High efficiency voltage up to 93.5% I/P-O/P: 3.75kVAC, I/P-FG: 2kVAC, O/P-FG:0.5kVAC CLG-150-20 (1~10VDC, A 20V, PWM 0~7.50A signal, or ±2% resistance) 150mV 90% • CLG-150-24 A 24V, 0~6.30A ±1% 150mV 90% CLG-100 Working IP67 / IP65 temperature design for indoor Series -40~+70 or outdoor O C (refer installations to output derating curve) Blank-Type: IP67 rated. Cable for I/O connection • Output current adjustable through (for 48V only) (for output 12~36V) cable (option) or internal BL-Type(option): CLG-150-30 A 30V, for HLG-80H 0~5.00A B-Type ±1% only, 150mV "UL8750 listed" 91% potentiometer Safety Model standards No. Output UL8750, Tol. TUV EN61347-1, R&N EN61347-2-13, Effi. PSE J61347-1, safety J61347-2-13 & IP66 approved, approved; contact MEAN WELL for CLG-150-36 A 36V, 0~4.20A ±1% 150mV 91% • Cooling CLG-100-12 by free 12V, air 0~5.00A convection Design ±3% refer to UL60950-1, 150mV 83.0% EN60950-1, EN60335-1 details • Suitable for dry, damp, and wet location D-Type(option): CLG-150-48 A IP67 48V, rated. 0~3.20A Timer ±1% dimming function, 200mV contact 91% • EMC Suitable CLG-100-15 standards for LED 15V, lighting 0~5.00A and EN55015, street ±3% lighting EN61000-3-2 150mV applications class 85.0% C, EN61000-3-3, EN61000-4-2,3,4,5,6,8,11, EN61547 □= A, B, C or blank MEAN WELL for details • Meet CLG-100-20 4kV surge 20V, Input immunity 0~4.80A level UL rated, (IEC61000-4-5) ±3% SJTW 18AWGx3C 150mV (30cm) 88.5% • Optional Connection CLG-60-12/24/48, CQC models CLG-100-12/24/48 available (HLG-100H/120H-A/Blank & CLG-150-12A/24A/36A/ type) • Class CLG-100-24 2 power unit 24V, Output 0~4.00A / Pass LPS (except A/D/Blank-Type: ±3% for HLG-120H) 150mV SVT 18AWGx2C 88.5% • 5 years (30cm); 48A B-Type: are warranty our SVT popular 18AWGx2C models. (30cm)+UL2517 We will keep sufficient 18AWGx2C stock (30cm) for prompt delivery of high quantity orders. Dimension (LxWxH) (mm) 171x 61.5x 36.8 HLG-80H HLG-100H/HLG-120H 17 INPUT HLG-40H Series (for 48V/54V) (for 12~42V) Model No. Output Tol. R&N Effi. HLG-40H-12 AOUTPUT 12V, 0~3.33A ±2.5% 150mV 86.5% HLG-40H-15 A 15V, 0~2.67A ±2.0% 150mV 86.5% HLG-40H-20 A 20V, 0~2.00A ±1.0% 150mV 88.0% Model No. Output Tol. R&N Effi. HLG-60H-36 A 36V, 0~1.70A ±1.0% A 200mV B Blank/D 90.0% HLG-60H-42 A 42V, 0~1.45A ±1.0% 300mV 90.0% HLG-60H-48 A 48V, 0~1.30A ±1.0% 300mV 90.5% HLG-60H-54 A 54V, 0~1.15A ±1.0% 300mV 90.5% = A, B, D or Blank
Page 1 and 2: STROMQUELLEN ANWENDUNGSBEISPIELE Ko
Page 3 and 4: 30~60W Single Output LED Power Supp
Page 5: TUV Rheinland Product Safety TUV Rh
Page 9 and 10: 70W &150W Single Output with PFC /
Page 11 and 12: LDB60 60W Constant Current/ Constan
Page 13 and 14: Refer to page 16 for additional inf
Page 15 and 16: Refer to page 16 for additional inf
Page 17 and 18: LXC50 SW 50W Constant Current
Page 19 and 20: LXC150 150W Constant Current
Page 21 and 22: LXV76 76W Constant Voltage
Page 23 and 24: LXC75-H 75W Constant Current
Page 25 and 26: connector system steckersysteM easy
Page 27 and 28: connector system steckersysteM easy
Page 29 and 30: Zubehör 10-fach Verteilerbox, para
Page 31 and 32: Zubehör IP67-Kabelset für flexibl
Page 33 and 34: Zubehör Anschlusskabel - 2-polig -
Page 35 and 36: LED-Sensoren Berührungssensor - 1,

LED Konverter/Treiber & Zubehör

Create successful ePaper yourself

Delete template?

Save as template?