Panic Exit Device - Hafele
Panic Exit Device - Hafele
Panic Exit Device - Hafele
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Locking and Security<br />
Information<br />
<br />
<br />
Emergency exit device EN 179<br />
<br />
2<br />
The standard cover devices to be used in<br />
emergency situations if people are familiar with<br />
the emergency exit and whose hardware. In this<br />
situation a panic is most unlikely to develop. Lever<br />
handle operated escape mortise locks or push<br />
pads may used therefore.<br />
<br />
<br />
<br />
<br />
<strong>Panic</strong> exit device EN 1125<br />
<br />
The standard cover devices to be used in panic<br />
situations if people are not familiar with the<br />
emergency exit and whose hardware but must be<br />
able to open the hardware intuitive. An horizontal<br />
operated touch bar is here required.<br />
<br />
<br />
<br />
<br />
We reserve the right to alter specifications without notice (HTH Architectural Hardware 2010).<br />
<br />
AH 2.48<br />
New products and systems: www.hafele.com
Locking and Security<br />
<strong>Panic</strong> <strong>Exit</strong> <strong>Device</strong><br />
<br />
<br />
Single panic bolts<br />
<br />
<strong>Panic</strong> hardware maintenance<br />
It is important that all panic and emergency exit<br />
hardware devices are inspected and maintained<br />
properly to ensure safety is maintained when exiting<br />
a building in any situation. Once a device is fitted,<br />
regular maintenance is recommended..<br />
Weekly:<br />
• Make sure the exit device functions correctly<br />
• Any fixings that have worked loose should be<br />
re-secured<br />
• Any damaged components should be replaced<br />
• Ensure there are no obstructions which prevent<br />
the panic unit from functioning correctly<br />
Every three months:<br />
• Check for wear, any visible worn components<br />
should be replaced<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
2<br />
Single panic bolt<br />
<br />
We reserve the right to alter specifications without notice (HTH Architectural Hardware 2010).<br />
<br />
Features<br />
• For single outward opening doors up to max.<br />
2,400 mm high x 1,220 mm wide<br />
• Used in conjunction with another single bolt for<br />
pair of plain meeting stile double doors.<br />
For pair of rebated doors<br />
• Push bar and shoots supplied with plugs for<br />
on-site cutting<br />
• Easy clean floor socket included<br />
• Anti-thrust device to prevent leverage of shoots<br />
• Shoot bolts automatically held retracted when<br />
door is in open position, and released on closing<br />
• Suits either hand<br />
• <strong>Exit</strong> only<br />
• Tested and approved to EN 1125<br />
• Certify approved; certificate no. 392 60 mins<br />
for timber doors<br />
• Fixings included, for timber doors<br />
• Self adhesive vinyl ‘Push bar to open’ sign included<br />
• Alloy aluminium and mild steel.<br />
Epoxy powder coated or plated finish<br />
Finish<br />
<br />
Silver<br />
<br />
Packing: 1 set<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
Cat. No.<br />
<br />
911.52.109<br />
New products and systems: www.hafele.com<br />
<br />
AH 2.49
Locking and Security<br />
<strong>Panic</strong> <strong>Exit</strong> <strong>Device</strong><br />
<br />
<br />
2<br />
<strong>Panic</strong> latches<br />
<br />
<strong>Panic</strong> hardware maintenance<br />
It is important that all panic and emergency exit<br />
hardware devices are inspected and maintained<br />
properly to ensure safety is maintained when exiting<br />
a building in any situation. Once a device is fitted, regular<br />
maintenance is recommended.<br />
Weekly:<br />
• Make sure the exit device functions correctly<br />
• Any fixings that have worked loose should<br />
be re-secured<br />
• Any damaged components should be replaced<br />
• Ensure there are no obstructions which prevent<br />
the panic unit from functioning correctly<br />
Every three months:<br />
• Check for wear, any visible worn components<br />
should be replaced<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
Single panic latch<br />
<br />
Features<br />
• For single outward opening doors up to<br />
max. 1,220 mm wide<br />
• Used in conjunction with a single panic bolt for<br />
pair of rebated meeting stile double doors<br />
• Push bar included with loose plugs for<br />
on-site cutting<br />
• Suits either hand<br />
• <strong>Exit</strong> only<br />
• Tested and approved to EN 1125<br />
• Certifire approved; certificate no. 392 60 mins<br />
for timber doors<br />
• Fixings included for timber doors<br />
• Self adhesive vinyl ‘Push bar to open’<br />
sign included<br />
• Diecast aluminium and mild steel.<br />
Epoxy powder coated or plated finish*<br />
Finish<br />
<br />
Silver<br />
<br />
Packing: 1 set<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
Cat. No.<br />
<br />
911.52.119<br />
We reserve the right to alter specifications without notice (HTH Architectural Hardware 2010).<br />
<br />
AH 2.50<br />
New products and systems: www.hafele.com
Locking and Security<br />
<strong>Panic</strong> <strong>Exit</strong> <strong>Device</strong><br />
<br />
<br />
Double panic bolts<br />
<br />
<strong>Panic</strong> hardware maintenance<br />
It is important that all panic and emergency exit<br />
hardware devices are inspected and maintained<br />
properly to ensure safety is maintained when exiting<br />
a building in any situation. Once a device is fitted,<br />
regular maintenance is recommended.<br />
Weekly:<br />
• Make sure the exit device functions correctly<br />
• Any fixings that have worked loose should be<br />
re-secured<br />
• Any damaged components should be replaced<br />
• Ensure there are no obstructions which prevent<br />
the panic unit from functioning correctly<br />
Every three months:<br />
• Check for wear, any visible worn components<br />
should be replaced<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
2<br />
Double panic bolt<br />
<br />
We reserve the right to alter specifications without notice (HTH Architectural Hardware 2010).<br />
<br />
Features<br />
• For double rebated outward opening doors up to<br />
max. 2400 mm high x 2440 mm wide<br />
• One set consists of:<br />
1 x Single panic bolt, page 49<br />
1 x Single panic latch, page 50<br />
1 x Box keeper, page 56<br />
• Push bar and shoots supplied with plugs for<br />
onsite cutting<br />
• Easy clean floor socket included<br />
• Anti-thrust device to prevent leverage of shoots<br />
• Shoot bolts automatically held retracted when<br />
door is in open position, and released on closing<br />
• Suits either hand<br />
• <strong>Exit</strong> only<br />
• Tested and approved to EN 1125<br />
• Certifire approved; certificate no. 392 60 mins<br />
for timber doors<br />
• Fixings included, for timber doors<br />
• Self adhesive vinyl ‘Push bar to open’ sign included<br />
• Diecast aluminium and mild steel.<br />
Epoxy powder coated or plated finish*<br />
Finish<br />
<br />
Silver<br />
<br />
Packing: 1 set<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
Cat. No.<br />
<br />
911.52.319<br />
New products and systems: www.hafele.com<br />
<br />
AH 2.51
Locking and Security<br />
<strong>Panic</strong> <strong>Exit</strong> <strong>Device</strong><br />
<br />
<br />
2<br />
Mortise actuated panic latch<br />
<br />
Features<br />
• For single outward opening doors up to<br />
max. 1,220 mm wide<br />
• Push bar supplied with plugs for on-site cutting<br />
• Suits either hand<br />
• <strong>Exit</strong> only<br />
• See Section 2 pages 80–87 for cylinders if<br />
required to open externally<br />
• Tested and approved to EN 1125<br />
• Fixings included, for timber doors<br />
• Self adhesive vinyl ‘Push bar to open’ sign included<br />
• Diecast aluminium and mild steel. Epoxy powder<br />
coated or plated finish*<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
Finish<br />
<br />
Silver<br />
<br />
Packing: 1 set<br />
<br />
Cat. No.<br />
<br />
911.52.329<br />
We reserve the right to alter specifications without notice (HTH Architectural Hardware 2010).<br />
<br />
AH 2.52<br />
New products and systems: www.hafele.com
Locking and Security<br />
<strong>Panic</strong> <strong>Exit</strong> <strong>Device</strong><br />
<br />
<br />
Push pad panic mortise latch<br />
<br />
Features<br />
• For single outward opening doors<br />
• Suits either hand<br />
• <strong>Exit</strong> only<br />
• See Section 2 pages 80–87 for cylinders if required<br />
to open externally<br />
• Tested and approved to EN 179<br />
• Fixings included, for timber doors<br />
• Self adhesive vinyl ‘Push bar to open’ sign included<br />
• Diecast aluminium and mild steel. Epoxy powder<br />
coated finish<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
2<br />
Finish<br />
<br />
Silver<br />
<br />
Packing: 1 set<br />
<br />
Cat. No.<br />
<br />
911.52.379<br />
Push pad panic latch<br />
<br />
We reserve the right to alter specifications without notice (HTH Architectural Hardware 2010).<br />
<br />
Features<br />
• For single outward opening doors<br />
• Suits either hand<br />
• <strong>Exit</strong> only<br />
• Tested and approved to EN 179<br />
• Certifire approved; certificate no. CF392 60 mins<br />
for timber doors<br />
• Fixings included, for timber doors<br />
• Self adhesive vinyl ‘Push bar to open’ sign included<br />
• Diecast aluminium and mild steel.<br />
Epoxy powder coated finish<br />
Finish<br />
<br />
Silver grey<br />
<br />
Packing: 1 pc.<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
Cat. No.<br />
<br />
911.52.369<br />
New products and systems: www.hafele.com<br />
<br />
AH 2.53
Locking and Security<br />
<strong>Panic</strong> <strong>Exit</strong> <strong>Device</strong><br />
<br />
<br />
2<br />
Vertical pullman catch kits<br />
<br />
Features<br />
• For use with panic bolts<br />
• Increased security<br />
• Provides smooth and quiet operation<br />
• Comprises:<br />
1 pair of pullman catches<br />
1 pair of strike plates<br />
1 pair of plugs<br />
1 Spacer<br />
Fixing screws<br />
• Stainless steel with aluminium cover<br />
• Other finishes available to order (only available<br />
complete with panic bolt), subject to quantity<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
Finish<br />
<br />
Stainless steel polished<br />
<br />
Silver<br />
<br />
Packing: 1 pc.<br />
<br />
Cat. No.<br />
<br />
911.52.351<br />
911.52.352<br />
We reserve the right to alter specifications without notice (HTH Architectural Hardware 2010).<br />
<br />
AH 2.54<br />
New products and systems: www.hafele.com
Locking and Security<br />
<strong>Panic</strong> <strong>Exit</strong> <strong>Device</strong><br />
<br />
<br />
Outside access devices<br />
<br />
Outside access device<br />
<br />
Features<br />
• For use with panic exit devices<br />
(except with mortise latches)<br />
• Suitable for doors up to 70 mm thick<br />
• Suits either hand<br />
• Supplied complete with profile cylinder, to differ<br />
(can be supplied master keyed to order)<br />
• Fixings included, for timber doors<br />
• Diecast aluminium, epoxy powder coated<br />
• Other finishes available to order, subject to quantity<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
2<br />
Finish<br />
<br />
Silver<br />
<br />
Packing: 1 pc.<br />
<br />
Cat. No.<br />
<br />
911.52.139<br />
We reserve the right to alter specifications without notice (HTH Architectural Hardware 2010).<br />
<br />
Outside access device<br />
<br />
Features<br />
• For use with panic exit devices<br />
(except with mortice latches)<br />
• Suitable for doors up to 70 mm thick<br />
• Suits either hand<br />
• Supplied complete with cylinder, to differ<br />
(cannot be supplied master keyed)<br />
• Fixings included, for timber doors<br />
• Aluminium alloy, epoxy powder coated<br />
• Other finishes available to order, subject to<br />
Finish<br />
<br />
Silver<br />
<br />
Packing: 1 pc.<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
Cat. No.<br />
<br />
911.54.000<br />
New products and systems: www.hafele.com<br />
<br />
AH 2.55
Locking and Security<br />
<strong>Panic</strong> <strong>Exit</strong> <strong>Device</strong><br />
<br />
<br />
2<br />
Box keeper<br />
<br />
Features<br />
• For flush fitting door/frame applications and double<br />
rebated doors<br />
• Steel, epoxy powder coated<br />
• Other finishes available to order as complete<br />
product, subject to quantity<br />
<br />
<br />
<br />
<br />
<br />
Finish<br />
<br />
Silver<br />
<br />
Packing: 1 pc.<br />
<br />
Cat. No.<br />
<br />
911.52.129<br />
MARKETING<br />
Pic<br />
We reserve the right to alter specifications without notice (HTH Architectural Hardware 2010).<br />
<br />
AH 2.56<br />
New products and systems: www.hafele.com
Locking and Security<br />
Information<br />
<br />
<br />
<strong>Panic</strong> exit device<br />
<br />
Features<br />
• For rebated or flush doors<br />
• For 1-leaf and 2-leaf doors<br />
• For timber or steel doors<br />
We reserve the right to alter specifications without notice (HTH Architectural Hardware 2010).<br />
<br />
• Suitable for application in escape and rescue routes<br />
• Suitable for DIN left and right hand<br />
• Certified according to EN 1125, Classification 3-7-5-1-1-3-2-2-A<br />
• The length of the touchbar must be at least 60 % of the<br />
effective door opening<br />
• Suitable for door leaf width (a) up to 1500 mm<br />
• Suitable for door leaf height (b) up to 2650 mm<br />
Function<br />
• Locking function:<br />
Lever handle (basic unit 2) can be locked by single<br />
profile cylinder (basic unit 3): access not possible from the outside<br />
• Opening of the door from the inside by pushing the touchbar<br />
• Opening the door from the outside optionally possible by lever<br />
handle or by lever handle and single profile cylinder<br />
Note<br />
• Basic unit 1 does not work with basic unit 3 alone:<br />
Single profile cylinders<br />
• Basic unit 1 works with<br />
- Basic unit 2: Lever handle only<br />
- Basic unit 2: Lever handle +<br />
- Basic unit 3: Single profile cylinder<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
Installation in rebated doors<br />
<br />
Installation in flush doors<br />
<br />
A - Basic unit 1: <strong>Panic</strong> lock<br />
B - Basic unit 2: Lever handle<br />
C - Basic unit 3: Single profile cylinder<br />
D - Basic unit 4: Latch parts and vertical<br />
rod type touchbar<br />
<br />
<br />
<br />
<br />
<br />
max. door leaf width a<br />
<br />
max. door leaf height b<br />
<br />
2<br />
New products and systems: www.hafele.com<br />
<br />
AH 2.57
Locking and Security<br />
Information<br />
<br />
<br />
Locking version for single leaf doors<br />
<br />
Locking version 1<br />
<br />
2<br />
Basic unit 1<br />
<br />
Inside<br />
<br />
Outside<br />
<br />
Basic unit 1 + touchbar (order separately)<br />
<br />
–<br />
Locking version 2<br />
<br />
Basic unit 1+2<br />
<br />
Inside<br />
<br />
Outside<br />
<br />
Basic unit 1 + touchbar (order separately)<br />
<br />
Basic unit 2<br />
<br />
Locking version 3<br />
<br />
Basic unit 1+2+3<br />
<br />
Inside<br />
<br />
Outside<br />
<br />
Basic unit 1 + touchbar (order separately)<br />
<br />
Basic unit 2<br />
<br />
Basic unit 3 + cylinder rosette (order separately)<br />
<br />
Locking version 4<br />
<br />
Basic unit 1+4<br />
<br />
Basic unit 1+2+3+4<br />
<br />
Inside<br />
<br />
Outside<br />
<br />
Locking version 5<br />
<br />
Inside<br />
<br />
Outside<br />
<br />
Basic unit 1 + touchbar (order separately)<br />
<br />
Basic unit 4<br />
<br />
–<br />
Basic unit 1 + touchbar (order separately)<br />
<br />
Basic unit 4<br />
<br />
Basic unit 2<br />
<br />
Basic unit 3 + cylinder rosette (order separately)<br />
<br />
We reserve the right to alter specifications without notice (HTH Architectural Hardware 2010).<br />
<br />
AH 2.58<br />
New products and systems: www.hafele.com
Locking and Security<br />
Information<br />
<br />
<br />
Locking version for double leaf doors<br />
<br />
Locking version 6<br />
<br />
Inactive leaf<br />
<br />
Active leaf<br />
<br />
Inside<br />
<br />
Basic unit 1 +<br />
touchbar (order separately)<br />
<br />
<br />
Basic unit 1 +<br />
touchbar (order separately)<br />
<br />
<br />
2<br />
Basic unit 4<br />
<br />
–<br />
Inactive leaf<br />
Active leaf<br />
Outside<br />
<br />
– –<br />
Basic unit 1+4<br />
<br />
<br />
Basic unit 1<br />
<br />
<br />
Locking version 7<br />
<br />
Inside<br />
<br />
Inactive leaf<br />
<br />
Basic unit 1 +<br />
touchbar (order separately)<br />
<br />
<br />
Basic unit 4<br />
<br />
Active leaf<br />
<br />
Basic unit 1 +<br />
touchbar (order separately)<br />
<br />
<br />
–<br />
Inactive leaf<br />
Active leaf<br />
Outside<br />
<br />
– Basic unit 2<br />
<br />
We reserve the right to alter specifications without notice (HTH Architectural Hardware 2010).<br />
<br />
Basic unit 1+4<br />
<br />
<br />
Inactive leaf<br />
Basic unit 1+4<br />
<br />
<br />
Basic unit 1+2<br />
<br />
<br />
Active leaf<br />
Basic unit 1<br />
<br />
<br />
Locking version 8<br />
<br />
Inside<br />
<br />
Outside<br />
<br />
Inactive leaf<br />
<br />
Basic unit 1 +<br />
touchbar (order separately)<br />
<br />
<br />
Basic unit 4<br />
<br />
Active leaf<br />
<br />
– Basic unit 2<br />
<br />
Basic unit 1 +<br />
touchbar (order separately)<br />
<br />
<br />
– Basic unit 3 +<br />
cylinder rosette<br />
(order separately)<br />
<br />
<br />
–<br />
New products and systems: www.hafele.com<br />
<br />
AH 2.59
Locking and Security<br />
<strong>Panic</strong> <strong>Exit</strong> <strong>Device</strong><br />
<br />
<br />
Base unit 1: <strong>Panic</strong> lock<br />
<br />
5<br />
2<br />
Features<br />
• For timber or steel doors<br />
• For rebated or flush doors<br />
• Suitable for application in escape and rescue routes<br />
• Suitable for DIN left and right hand<br />
• Prepared for single profile cylinder<br />
• Certified according to EN 1125:97<br />
Technical data<br />
• Lever follower: - 8 mm<br />
• Distance (b): 50 mm<br />
Supplied with<br />
2 Striking plates<br />
1 Set of fixing material<br />
1 Set of installation instructions<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
- <br />
<br />
<br />
<br />
<br />
<br />
Switching DIN left/right hand and locking the latch<br />
<br />
Housing<br />
<br />
Internal housing<br />
<br />
Latch<br />
<br />
Lever follower<br />
<br />
Cat. No.<br />
<br />
Steel grey lacquered<br />
<br />
Steel yellow chromatized<br />
<br />
Stainless steel<br />
<br />
Zinc alloy<br />
<br />
911.52.272<br />
We reserve the right to alter specifications without notice (HTH Architectural Hardware 2010).<br />
<br />
AH 2.60<br />
New products and systems: www.hafele.com
Locking and Security<br />
<strong>Panic</strong> <strong>Exit</strong> <strong>Device</strong><br />
<br />
<br />
Touchbar<br />
<br />
Features<br />
• Suitable for basic unit 1: <strong>Panic</strong> lock<br />
Technical data<br />
Diameter: 25 mm<br />
<br />
<br />
<br />
<br />
2<br />
Finish<br />
<br />
Stainless steel matt<br />
<br />
1000 mm 1200 mm 1500 mm<br />
911.52.279 911.52.280 911.52.281<br />
Basic unit 2: Lever handle<br />
<br />
We reserve the right to alter specifications without notice (HTH Architectural Hardware 2010).<br />
<br />
Features<br />
• Lever handle aperture part with rosette and square spindle<br />
Technical data<br />
Square spindle: - 8 mm<br />
Supplied with<br />
Fixing material<br />
<br />
<br />
<br />
: - <br />
<br />
<br />
Lever handle aperture part<br />
<br />
Rosette<br />
<br />
Square spindle<br />
<br />
Cat. No.<br />
<br />
Zinc alloy grey lacquered<br />
<br />
Plastic grey<br />
<br />
Zinc yellow chromatized<br />
<br />
911.52.287<br />
New products and systems: www.hafele.com<br />
<br />
AH 2.61
Locking and Security<br />
<strong>Panic</strong> <strong>Exit</strong> <strong>Device</strong><br />
<br />
<br />
2<br />
Basic unit 3: Single profile cylinder<br />
<br />
Length A = external length of cylinder<br />
<br />
Cylinder rosette<br />
<br />
Features<br />
• Suitable for basic unit 1: <strong>Panic</strong> lock<br />
• Only in connection with basic unit 2: Lever handle insertable<br />
• With 5 pin tumblers<br />
• Follower adjustable to 8 positions<br />
• Single profile cylinder: Brass nickel plated matt,<br />
glass bead blasted<br />
Fixing<br />
Length A results from:<br />
Door leaf thickness + 11 mm + cylinder rosette<br />
Supplied with<br />
1 Single profile cylinder<br />
3 Nickel plated steel keys<br />
1 Fixing screw<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
Length A<br />
<br />
Features<br />
• Suitable for basic unit 3: Single profile cylinder<br />
Supplied with<br />
Fixing material<br />
<br />
<br />
<br />
<br />
Finish<br />
<br />
Plastic grey<br />
<br />
Length B<br />
<br />
Length C<br />
<br />
Cat. No.<br />
<br />
27.5 mm 10 mm 37.5 mm 916.00.601<br />
31.5 mm 41.5 mm 916.00.602<br />
35.5 mm 45.5 mm 916.00.603<br />
40.5 mm 50.5 mm 916.00.604<br />
55.5 mm 65.5 mm 916.00.605<br />
60.5 mm 70.5 mm 916.00.606<br />
65.5 mm 75.5 mm 916.00.607<br />
Cat. No.<br />
<br />
911.52.292<br />
We reserve the right to alter specifications without notice (HTH Architectural Hardware 2010).<br />
<br />
AH 2.62<br />
New products and systems: www.hafele.com
Locking and Security<br />
<strong>Panic</strong> <strong>Exit</strong> <strong>Device</strong><br />
<br />
<br />
We reserve the right to alter specifications without notice (HTH Architectural Hardware 2010).<br />
<br />
Basic unit 4: Latch parts and vertical rod type touchbar<br />
<br />
Features<br />
• Suitable for basic unit 1: <strong>Panic</strong> lock<br />
• For timber or steel doors<br />
• For rebated or flush doors<br />
• Suitable for application in escape and rescue routes<br />
• Suitable for DIN left and right hand<br />
• Suitable for door leaf height up to 2,650 mm<br />
Supplied with<br />
2 Latch parts and covers<br />
2 Vertical rod type touchbars top and bottom<br />
3 Bar guides<br />
2 Striking plates<br />
1 Set of fixing material<br />
1 Set of installation instructions<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
Covers<br />
<br />
Latch parts<br />
<br />
Latch<br />
<br />
Vertical rod type touchbars<br />
<br />
Bar guides<br />
<br />
Cat. No.<br />
<br />
Finish<br />
<br />
Steel grey lacquered<br />
<br />
Steel yellow chromatized<br />
<br />
Stainless steel<br />
<br />
Steel grey lacquered<br />
<br />
Plastic grey<br />
<br />
911.52.302<br />
2<br />
New products and systems: www.hafele.com<br />
<br />
AH 2.63
Locking and Security<br />
<strong>Panic</strong> <strong>Exit</strong> <strong>Device</strong><br />
<br />
<br />
2<br />
<strong>Panic</strong> exit device<br />
<br />
Area of application: For rebated or flush, single or double wooden or<br />
steel doors<br />
Suitable for: Fire resistant and smoke control doors<br />
Door width: 840 – 914 mm<br />
Door thickness: 43.9 – 50.8 mm<br />
Mounting: For DIN left and DIN right hand use<br />
UL listed for ANSI A 1563<br />
Function<br />
Opening of door from inside: By pushing the touchbar<br />
Opening of door from outside (optional): By activating the lever<br />
handle. Key locks or unlocks lever handles (ANSI cipher bit function)<br />
Product components for single doors<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
Product components for double doors<br />
<br />
Inside:<br />
- 1 Touchbar A<br />
Outside:<br />
- 1 Lever handles with round rosette E<br />
<br />
A <br />
<br />
E <br />
Inside:<br />
- 1 Touchbar with vertical locking rod B<br />
Outside:<br />
- 1 Lever handle on backplate D<br />
<br />
B <br />
<br />
D <br />
Inside:<br />
- Action leaf: 1 Touchbar A<br />
- Inactive leaf: 1 Touchbar with vertical locking rod B<br />
and 1 striking plate C<br />
Outside:<br />
- 1 Lever handle on backplate D or<br />
- 1 Lever handles with round rosette E<br />
<br />
A <br />
B <br />
C <br />
<br />
E <br />
Inside:<br />
- Action and inactive leaf: Touchbar with vertical locking rod B each<br />
Outside:<br />
- 1 Lever handles with round rosette E<br />
<br />
B <br />
<br />
<br />
E <br />
We reserve the right to alter specifications without notice (HTH Architectural Hardware 2010).<br />
<br />
AH 2.64<br />
New products and systems: www.hafele.com
Locking and Security<br />
<strong>Panic</strong> <strong>Exit</strong> <strong>Device</strong><br />
A Touchbar<br />
<br />
<br />
<br />
Supplied with<br />
1 Touchbar<br />
1 Striking plate<br />
<br />
<br />
<br />
Packing: 1 pc.<br />
<br />
Cat. No.<br />
<br />
911.56.036<br />
2<br />
B Touchbar with vertical locking rod<br />
<br />
Packing: 1 pc.<br />
<br />
Cat. No.<br />
<br />
911.56.037<br />
We reserve the right to alter specifications without notice (HTH Architectural Hardware 2010).<br />
<br />
New products and systems: www.hafele.com<br />
<br />
AH 2.65
2<br />
Locking and Security<br />
<strong>Panic</strong> <strong>Exit</strong> <strong>Device</strong><br />
C Striking plate<br />
<br />
<br />
<br />
Area of application<br />
For double doors inside: Active leaf with touchbar A,<br />
inactive leaf with touchbar with vertical locking rod B<br />
<br />
A<br />
B<br />
Striking plate<br />
<br />
Packing: 1 pc.<br />
<br />
Cat. No.<br />
<br />
911.56.024<br />
E Lever handle with round rosette<br />
<br />
Lever handle with round rosette<br />
<br />
Packing: 1 pc.<br />
<br />
Cat. No.<br />
<br />
911.56.038<br />
D Lever handle on backplate and cylinder<br />
<br />
Lever handle with round rosette<br />
<br />
Packing: 1 pc.<br />
<br />
Cat. No.<br />
<br />
911.56.028<br />
We reserve the right to alter specifications without notice (HTH Architectural Hardware 2010).<br />
<br />
AH 2.66<br />
New products and systems: www.hafele.com