Door Handles, Locking and Security - Hafele
Door Handles, Locking and Security - Hafele
Door Handles, Locking and Security - Hafele
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Architectural Hardware<br />
<strong>Door</strong> <strong>H<strong>and</strong>les</strong><br />
Lever h<strong>and</strong>le sets - Stainless steel<br />
Finish<br />
Cat. No.<br />
Finish<br />
Cat. No.<br />
Finish<br />
Cat. No.<br />
Matt 902.92.220<br />
Matt 902.92.230<br />
Matt 902.92.240<br />
Finish<br />
Cat. No.<br />
Finish<br />
Cat. No.<br />
Finish<br />
Cat. No.<br />
Matt 902.92.290<br />
Matt 902.92.370<br />
Polished/matt 902.92.401<br />
10<br />
Finish<br />
Cat. No.<br />
Polished/matt 902.92.441<br />
Finish<br />
Cat. No.<br />
Matt 902.92.470<br />
Finish<br />
Cat. No.<br />
Matt 902.92.590<br />
Finish<br />
Cat. No.<br />
Matt 902.92.630<br />
Finish<br />
Cat. No.<br />
Matt 902.92.460<br />
Finish<br />
Cat. No.<br />
Matt 902.92.490<br />
We reserve the right to alter specifications without notice (HMA Basic 2011/12).<br />
HMA 10.6<br />
New products <strong>and</strong> systems: www.hafele.com
Architectural Hardware<br />
<strong>Door</strong> <strong>H<strong>and</strong>les</strong><br />
Lever h<strong>and</strong>le sets - Stainless steel<br />
Finish<br />
Cat. No.<br />
Polished/matt 902.92.641<br />
Finish<br />
Cat. No.<br />
Polished/matt 902.92.651<br />
Finish<br />
Cat. No.<br />
Matt 902.92.660<br />
Finish<br />
Cat. No.<br />
Polished/matt 902.92.671<br />
Finish<br />
Cat. No.<br />
Matt 902.92.720<br />
Finish<br />
Cat. No.<br />
Polished/matt 902.92.941<br />
We reserve the right to alter specifications without notice (HMA Basic 2011/12).<br />
Finish<br />
Cat. No.<br />
Matt 902.92.950<br />
Finish<br />
Cat. No.<br />
Matt 902.92.092<br />
Finish<br />
Cat. No.<br />
Polished/matt 902.92.372<br />
Finish<br />
Cat. No.<br />
Matt 902.92.094<br />
Finish<br />
Cat. No.<br />
Matt 902.92.082<br />
Finish<br />
Cat. No.<br />
Matt/beech 902.92.990<br />
10<br />
New products <strong>and</strong> systems: www.hafele.com<br />
HMA 10.7
Architectural Hardware<br />
<strong>Door</strong> <strong>H<strong>and</strong>les</strong><br />
Lever h<strong>and</strong>le sets - Stainless steel<br />
Finish<br />
Cat. No.<br />
Finish<br />
Cat. No.<br />
Finish<br />
Cat. No.<br />
Matt 903.99.723<br />
Matt 903.99.724<br />
Polished/matt 903.99.005<br />
Finish<br />
Cat. No.<br />
Finish<br />
Cat. No.<br />
Finish<br />
Cat. No.<br />
Polished/matt 903.99.006<br />
Polished/matt 903.99.007<br />
Matt 903.99.008<br />
10<br />
Finish<br />
Cat. No.<br />
Matt 903.99.009<br />
Finish<br />
Cat. No.<br />
Matt 903.99.012<br />
Finish<br />
Cat. No.<br />
Matt 903.99.010<br />
Finish<br />
Cat. No.<br />
Matt 903.99.013<br />
Finish<br />
Cat. No.<br />
Polished/matt 903.99.011<br />
Finish<br />
Cat. No.<br />
Polished/matt 903.99.014<br />
We reserve the right to alter specifications without notice (HMA Basic 2011/12).<br />
HMA 10.8<br />
New products <strong>and</strong> systems: www.hafele.com
Architectural Hardware<br />
<strong>Door</strong> <strong>H<strong>and</strong>les</strong><br />
Lever h<strong>and</strong>le sets - Stainless steel<br />
Finish<br />
Cat. No.<br />
Finish<br />
Cat. No.<br />
Finish<br />
Cat. No.<br />
Matt 903.99.015<br />
Matt 903.99.016<br />
Matt 903.99.017<br />
Finish<br />
Cat. No.<br />
Finish<br />
Cat. No.<br />
Finish<br />
Cat. No.<br />
Matt 903.99.028<br />
Polished/matt 902.92.840<br />
Matt 902.92.850<br />
We reserve the right to alter specifications without notice (HMA Basic 2011/12).<br />
Finish<br />
Cat. No.<br />
Matt 902.92.860<br />
Finish<br />
Cat. No.<br />
Matt 902.92.890<br />
Finish<br />
Cat. No.<br />
Matt 902.92.870<br />
Finish<br />
Cat. No.<br />
Matt 902.92.412<br />
Finish<br />
Cat. No.<br />
Matt 902.92.880<br />
Finish<br />
Cat. No.<br />
Matt 903.99.427<br />
10<br />
New products <strong>and</strong> systems: www.hafele.com<br />
HMA 10.9
Architectural Hardware<br />
<strong>Door</strong> <strong>H<strong>and</strong>les</strong><br />
Lever h<strong>and</strong>le sets - Brass<br />
Finish<br />
Cat. No.<br />
Finish<br />
Cat. No.<br />
Finish<br />
Cat. No.<br />
Polished/matt,<br />
PVD<br />
900.92.005<br />
Nickel plated,<br />
polished/matt, PVD<br />
900.92.006<br />
Polished/matt,<br />
PVD<br />
900.92.025<br />
Finish<br />
Cat. No.<br />
Finish<br />
Cat. No.<br />
Finish<br />
Cat. No.<br />
Nickel plated,<br />
polished/matt, PVD<br />
900.92.026<br />
Polished/matt,<br />
PVD<br />
900.92.035<br />
Nickel plated,<br />
polished/matt, PVD<br />
900.92.036<br />
10<br />
Finish<br />
Polished,<br />
PVD<br />
Finish<br />
Nickel plated,<br />
matt, PVD<br />
Cat. No.<br />
900.92.365<br />
Cat. No.<br />
900.92.356<br />
Finish<br />
Nickel plated,<br />
matt, PVD<br />
Finish<br />
Polished,<br />
PVD<br />
Cat. No.<br />
900.92.366<br />
Cat. No.<br />
900.92.375<br />
Finish<br />
Polished,<br />
PVD<br />
Finish<br />
Nickel plated,<br />
matt, PVD<br />
Cat. No.<br />
900.92.355<br />
Cat. No.<br />
900.92.376<br />
We reserve the right to alter specifications without notice (HMA Basic 2011/12).<br />
HMA 10.10<br />
New products <strong>and</strong> systems: www.hafele.com
Architectural Hardware<br />
<strong>Door</strong> <strong>H<strong>and</strong>les</strong><br />
Lever h<strong>and</strong>le sets - Brass<br />
Finish<br />
Cat. No.<br />
Finish<br />
Cat. No.<br />
Finish<br />
Cat. No.<br />
Matt,<br />
PVD<br />
901.82.175<br />
Nickel plated,<br />
matt, PVD<br />
901.82.174<br />
Chrome plated,<br />
polished/<br />
Nickel plated, matt<br />
900.82.071<br />
Finish<br />
Cat. No.<br />
Finish<br />
Cat. No.<br />
Finish<br />
Cat. No.<br />
Polished/matt 900.82.291<br />
Chrome plated,<br />
polished/matt<br />
900.82.290<br />
Chrome plated,<br />
polished/matt<br />
900.82.362<br />
We reserve the right to alter specifications without notice (HMA Basic 2011/12).<br />
Finish<br />
Cat. No.<br />
Steel coloured 901.92.783<br />
Finish<br />
Nickel plated,<br />
matt<br />
Cat. No.<br />
901.92.306<br />
Finish<br />
Chrome plated,<br />
polished<br />
Cat. No.<br />
900.82.084<br />
10<br />
New products <strong>and</strong> systems: www.hafele.com<br />
HMA 10.11
Architectural Hardware<br />
<strong>Door</strong> <strong>H<strong>and</strong>les</strong><br />
Lever h<strong>and</strong>le sets - Brass<br />
Finish<br />
Cat. No.<br />
Finish<br />
Cat. No.<br />
Finish<br />
Cat. No.<br />
Chrome plated,<br />
polished/matt<br />
900.82.300<br />
Chrome plated,<br />
polished/matt<br />
900.80.300<br />
Polished/matt 900.82.301<br />
Finish<br />
Cat. No.<br />
Finish<br />
Cat. No.<br />
Finish<br />
Cat. No.<br />
Polished/matt 900.80.301<br />
Polished 900.82.108<br />
Polished 900.80.108<br />
10<br />
Finish<br />
Cat. No.<br />
Bronzed <strong>and</strong> brushed 900.82.107<br />
Finish<br />
Cat. No.<br />
Polished 900.80.508<br />
Finish<br />
Cat. No.<br />
Bronzed <strong>and</strong> brushed 900.80.107<br />
Finish<br />
Cat. No.<br />
Bronzed <strong>and</strong> brushed 900.82.507<br />
Finish<br />
Cat. No.<br />
Polished/brushed 900.82.508<br />
Finish<br />
Cat. No.<br />
Bronzed <strong>and</strong> brushed 900.80.507<br />
We reserve the right to alter specifications without notice (HMA Basic 2011/12).<br />
HMA 10.12<br />
New products <strong>and</strong> systems: www.hafele.com
Architectural Hardware<br />
<strong>Door</strong> <strong>H<strong>and</strong>les</strong><br />
Lever h<strong>and</strong>le sets - Brass<br />
Finish<br />
Cat. No.<br />
Finish<br />
Cat. No.<br />
Finish<br />
Cat. No.<br />
Antique 901.92.136<br />
Dark antique 901.92.137<br />
Silver antique 901.92.138<br />
Old dark antique 901.92.139<br />
Antique 901.82.306<br />
Dark antique 901.82.307<br />
Silver antique 901.82.308<br />
Old dark antique 901.82.309<br />
Antique 901.82.336<br />
Dark antique 901.82.337<br />
Silver antique 901.82.338<br />
Old dark antique 901.82.339<br />
Finish<br />
Cat. No.<br />
Finish<br />
Cat. No.<br />
Finish<br />
Cat. No.<br />
Old dark antique 900.20.139<br />
Polished 901.99.132<br />
Polished 901.99.129<br />
We reserve the right to alter specifications without notice (HMA Basic 2011/12).<br />
Finish<br />
Cat. No.<br />
Polished 901.99.116<br />
Finish<br />
Cat. No.<br />
Polished 901.99.125<br />
Finish<br />
Cat. No.<br />
Polished 901.99.127<br />
Finish<br />
Cat. No.<br />
Polished 901.99.117<br />
Finish<br />
Cat. No.<br />
Polished 901.99.133<br />
Finish<br />
Cat. No.<br />
Polished 901.99.128<br />
10<br />
New products <strong>and</strong> systems: www.hafele.com<br />
HMA 10.13
Architectural Hardware<br />
<strong>Door</strong> <strong>H<strong>and</strong>les</strong><br />
Lever h<strong>and</strong>le sets - Zinc alloy<br />
Finish<br />
Cat. No.<br />
Chrome/nickel matt 900.92.142<br />
Chrome/black 900.92.143<br />
Finish<br />
Cat. No.<br />
Satin chrome 900.92.176<br />
Finish<br />
Cat. No.<br />
Chrome/matt 900.92.002<br />
Finish<br />
Cat. No.<br />
Finish<br />
Cat. No.<br />
Finish<br />
Cat. No.<br />
Brass, polished 900.92.305<br />
Chrome, polished/<br />
stainless steel matt<br />
901.92.802<br />
Chrome, polished/<br />
stainless steel matt<br />
901.92.852<br />
Lever h<strong>and</strong>le sets - Aluminium<br />
10<br />
Finish<br />
Cat. No.<br />
Silver coloured 905.82.039<br />
Finish<br />
Cat. No.<br />
Steel coloured 904.92.170<br />
Finish<br />
Cat. No.<br />
Anodized 905.82.201<br />
Finish<br />
Cat. No.<br />
Silver coloured 905.82.071<br />
We reserve the right to alter specifications without notice (HMA Basic 2011/12).<br />
HMA 10.14<br />
New products <strong>and</strong> systems: www.hafele.com
Architectural Hardware<br />
<strong>Door</strong> <strong>H<strong>and</strong>les</strong><br />
Accessories for lever h<strong>and</strong>le sets<br />
Emergency release <strong>and</strong> inside turn, Ø52 mm<br />
Escutcheon, Ø52 mm<br />
Version<br />
Cat. No.<br />
Without indicator 902.54.950<br />
With indicator 902.54.952<br />
Version Material Finish Cat. No.<br />
Blind Brass Polished, PVD 900.55.645<br />
Profile cylinder 900.52.645<br />
Packing: 1 set incl. fixing material <strong>and</strong> 8 mm spindle<br />
Packing: 1 set incl. fixing material<br />
Escutcheon, blind, Ø52 mm<br />
Escutcheon, profile cylinder, Ø52 mm<br />
Material Finish Cat. No.<br />
Stainless steel Matt 902.50.930<br />
Brass coloured polished 902.50.938<br />
Antique copper 902.50.933<br />
Antique brass 902.50.931<br />
Material Finish Cat. No.<br />
Stainless steel Matt 902.52.930<br />
Brass coloured polished 902.52.938<br />
Antique copper 902.52.933<br />
Antique brass 902.52.931<br />
Packing: 1 pc. without fixing material<br />
Packing: 1 pc. without fixing material<br />
Escutcheon, lever h<strong>and</strong>le, 68 x 30 mm<br />
Escutcheon, profile cylinder, 68 x 30 mm<br />
We reserve the right to alter specifications without notice (HMA Basic 2011/12).<br />
Material Finish Cat. No.<br />
Stainless steel Matt 902.50.940<br />
Brass coloured polished 902.50.948<br />
Antique copper 902.50.943<br />
Antique brass 902.50.941<br />
Packing: 1 pc. without fixing material<br />
Arresting plate for dummy h<strong>and</strong>le<br />
Material Dim. Cat. No.<br />
Brass 27 x 27 mm 909.00.946<br />
Packing: 1 pc. without fixing material<br />
Material Finish Cat. No.<br />
Stainless steel Matt 902.52.940<br />
Brass coloured polished 902.52.948<br />
Antique copper 902.52.943<br />
Antique brass 902.52.941<br />
Packing: 1 pc. without fixing material<br />
Knob lockset replacement cover<br />
Cat. No.<br />
Knob lockset replacement cover 903.62.400<br />
Packing: 1 pc. without fixing material<br />
10<br />
New products <strong>and</strong> systems: www.hafele.com<br />
HMA 10.15
Architectural Hardware<br />
<strong>Door</strong> <strong>H<strong>and</strong>les</strong><br />
Pull h<strong>and</strong>le sets – Stainless steel<br />
• For glass, aluminium <strong>and</strong> timber doors with back to backfixing<br />
• M8 thread<br />
• For door thickness 8 – 50 mm<br />
• With support rosettes<br />
Supplied with<br />
• 1 Pair of pull h<strong>and</strong>les<br />
• 1 Fixing set for glass doors<br />
• 1 Fixing set for aluminium <strong>and</strong> timber doors<br />
Finish<br />
Cat. No.<br />
Polished 903.01.100<br />
Packing: 1 set<br />
• For glass, aluminium <strong>and</strong> timber doors with back to backfixing<br />
• M8 thread<br />
• For door thickness 8 – 50 mm<br />
• With support rosettes<br />
Supplied with<br />
• 1 Pair of pull h<strong>and</strong>les<br />
• 1 Fixing set for glass doors<br />
• 1 Fixing set for aluminium <strong>and</strong> timber doors<br />
Finish<br />
Cat. No.<br />
Polished 903.01.114<br />
Packing: 1 set<br />
10<br />
• For glass, aluminium <strong>and</strong> timber doors with back to backfixing<br />
• M8 thread<br />
• For door thickness 8 – 50 mm<br />
• With support rosettes<br />
Supplied with<br />
• 1 Pair of pull h<strong>and</strong>les<br />
• 1 Fixing set for glass doors<br />
• 1 Fixing set for aluminium <strong>and</strong> timber doors<br />
Finish<br />
Cat. No.<br />
Polished 903.01.365<br />
Packing: 1 set<br />
• For timber doors, aluminium <strong>and</strong> glass with back to backfixing<br />
• M8 thread<br />
• For door thickness 8 – 50 mm<br />
Supplied with<br />
• 1 Pair of pull h<strong>and</strong>les<br />
• 1 Fixing set for glass doors<br />
• 1 Fixing set for aluminium <strong>and</strong> timber doors<br />
Finish Dim. A Cat. No.<br />
Matt 300 mm 903.00.643<br />
350 mm 903.00.644<br />
Packing: 1 set<br />
We reserve the right to alter specifications without notice (HMA Basic 2011/12).<br />
HMA 10.16<br />
New products <strong>and</strong> systems: www.hafele.com
Architectural Hardware<br />
<strong>Door</strong> <strong>H<strong>and</strong>les</strong><br />
Pull h<strong>and</strong>le sets - Stainless steel<br />
• For timber doors, aluminium <strong>and</strong> glass with back to backfixing<br />
• M8 thread<br />
• For door thickness 8 – 50 mm<br />
Supplied with<br />
• 1 Pair of pull h<strong>and</strong>les<br />
• 1 Fixing set for glass doors<br />
• 1 Fixing set for aluminium <strong>and</strong> timber doors<br />
Finish Dim. A Cat. No.<br />
Matt 300 mm 903.00.653<br />
350 mm 903.00.654<br />
Packing: 1 set<br />
• For timber doors, aluminium <strong>and</strong> glass with back to backfixing<br />
• M8 thread<br />
• For door thickness 8 – 50 mm<br />
Supplied with<br />
• 1 Pair of pull h<strong>and</strong>les<br />
• 1 Fixing set for glass doors<br />
• 1 Fixing set for aluminium <strong>and</strong> timber doors<br />
Finish Dim. A Dim. B Cat. No.<br />
Matt 300 mm 165 mm 903.00.663<br />
350 mm 190 mm 903.00.664<br />
Packing: 1 set<br />
• For timber doors, aluminium <strong>and</strong> glass with back to backfixing<br />
• M8 thread<br />
• For door thickness 8 – 50 mm<br />
Supplied with<br />
• 1 Pair of pull h<strong>and</strong>les<br />
• 1 Fixing set for glass doors<br />
• 1 Fixing set for aluminium <strong>and</strong> timber doors<br />
We reserve the right to alter specifications without notice (HMA Basic 2011/12).<br />
Finish Dim. A Dim. B Cat. No.<br />
Matt 300 mm 225 mm 903.00.673<br />
350 mm 250 mm 903.00.674<br />
Packing: 1 set<br />
• For timber doors, aluminium <strong>and</strong> glass with back to backfixing<br />
• M8 thread<br />
• For door thickness 8 – 50 mm<br />
Supplied with<br />
• 1 Pair of pull h<strong>and</strong>les<br />
• 1 Fixing set for glass doors<br />
• 1 Fixing set for aluminium <strong>and</strong> timber doors<br />
Finish Dim. A Cat. No.<br />
Matt 450 mm 903.05.800<br />
600 mm 903.05.810<br />
Packing: 1 set<br />
10<br />
New products <strong>and</strong> systems: www.hafele.com<br />
HMA 10.17
Architectural Hardware<br />
<strong>Door</strong> <strong>H<strong>and</strong>les</strong><br />
Pull h<strong>and</strong>le sets - Stainless steel<br />
• For timber doors, aluminium <strong>and</strong> glass with back to backfixing<br />
• M8 thread<br />
• For door thickness 8 – 50 mm<br />
Supplied with<br />
• 1 Pair of pull h<strong>and</strong>les<br />
• 1 Fixing set for glass doors<br />
• 1 Fixing set for aluminium <strong>and</strong> timber doors<br />
Pull h<strong>and</strong>le Ø 25 mm<br />
Dim. A Dim. B Cat. No.<br />
300 mm 200 mm 903.00.423<br />
400 mm 300 mm 903.00.424<br />
500 mm 300 mm 903.00.425<br />
600 mm 400 mm 903.00.426<br />
800 mm 600 mm 903.00.428<br />
1,000 mm 800 mm 903.00.430<br />
1,200 mm 1,000 mm 903.00.432<br />
1,400 mm 1,200 mm 903.00.434<br />
1,600 mm 1,400 mm 903.00.436<br />
Packing: 1 set<br />
Pull h<strong>and</strong>le Ø 32 mm<br />
Dim. A Dim. B Cat. No.<br />
300 mm 200 mm 903.00.623<br />
400 mm 300 mm 903.00.624<br />
500 mm 300 mm 903.00.625<br />
600 mm 400 mm 903.00.626<br />
800 mm 600 mm 903.00.628<br />
1,000 mm 800 mm 903.00.630<br />
1,200 mm 1,000 mm 903.00.632<br />
1,400 mm 1,200 mm 903.00.634<br />
1,600 mm 1,400 mm 903.00.636<br />
Packing: 1 set<br />
• For timber doors, aluminium <strong>and</strong> glass with back to backfixing<br />
• M8 thread<br />
• For door thickness 8 – 50 mm<br />
Supplied with<br />
• 1 Pair of pull h<strong>and</strong>les<br />
• 1 Fixing set for glass doors<br />
• 1 Fixing set for aluminium <strong>and</strong> timber doors<br />
Pull h<strong>and</strong>le Ø 25 mm<br />
Pull h<strong>and</strong>le Ø 32 mm<br />
10<br />
Dim. A Dim. B Cat. No.<br />
300 mm 200 mm 903.00.523<br />
400 mm 300 mm 903.00.524<br />
500 mm 300 mm 903.00.525<br />
600 mm 400 mm 903.00.526<br />
800 mm 600 mm 903.00.528<br />
1,000 mm 800 mm 903.00.530<br />
1,200 mm 1,000 mm 903.00.532<br />
1,400 mm 1,200 mm 903.00.534<br />
1,600 mm 1,400 mm 903.00.536<br />
Packing: 1 set<br />
Dim. A Dim. B Cat. No.<br />
300 mm 200 mm 903.00.723<br />
400 mm 300 mm 903.00.724<br />
500 mm 300 mm 903.00.725<br />
600 mm 400 mm 903.00.726<br />
800 mm 600 mm 903.00.728<br />
1,000 mm 800 mm 903.00.730<br />
1,200 mm 1,000 mm 903.00.732<br />
1,400 mm 1,200 mm 903.00.734<br />
1,600 mm 1,400 mm 903.00.736<br />
Packing: 1 set<br />
• For timber doors, aluminium <strong>and</strong> glass with back to backfixing<br />
• M6 thread<br />
• For door thickness 8 – 50 mm<br />
Supplied with<br />
• 1 Pair of pull h<strong>and</strong>les<br />
• 1 Fixing set for glass doors<br />
• 1 Fixing set for aluminium <strong>and</strong> timber doors<br />
Finish<br />
Cat. No.<br />
Matt 903.00.080<br />
Packing: 1 set<br />
We reserve the right to alter specifications without notice (HMA Basic 2011/12).<br />
HMA 10.18<br />
New products <strong>and</strong> systems: www.hafele.com
Architectural Hardware<br />
<strong>Door</strong> <strong>H<strong>and</strong>les</strong><br />
Pull h<strong>and</strong>le sets - Stainless steel<br />
• For timber doors, aluminium <strong>and</strong> glass with back to backfixing<br />
• M8 thread<br />
• For door thickness 8 – 50 mm<br />
Supplied with<br />
• 1 Pair of pull h<strong>and</strong>les<br />
• 1 Fixing set for glass doors<br />
• 1 Fixing set for aluminium <strong>and</strong> timber doors<br />
Finish<br />
Cat. No.<br />
Matt 903.00.090<br />
Packing: 1 set<br />
• For timber doors, aluminium <strong>and</strong> glass with back to backfixing<br />
• M6 thread<br />
• For door thickness 8 – 50 mm<br />
Supplied with<br />
• 1 Pair of pull h<strong>and</strong>les<br />
• 1 Fixing set for glass doors<br />
• 1 Fixing set for aluminium <strong>and</strong> timber doors<br />
Finish<br />
Cat. No.<br />
Matt 903.00.160<br />
Packing: 1 set<br />
• For timber doors, aluminium <strong>and</strong> glass with back to backfixing<br />
• M8 thread<br />
• For door thickness 8 – 50 mm<br />
Supplied with<br />
• 1 Pair of pull h<strong>and</strong>les<br />
• 1 Fixing set for glass doors<br />
• 1 Fixing set for aluminium <strong>and</strong> timber doors<br />
We reserve the right to alter specifications without notice (HMA Basic 2011/12).<br />
Finish Size A Cat. No.<br />
Matt 300 mm 903.05.850<br />
450 mm 903.05.860<br />
600 mm 903.05.870<br />
Packing: 1 set<br />
• For glass, aluminium <strong>and</strong> timber doors with back to back fixing<br />
• M8 thread<br />
• For door thickness 8 – 50 mm<br />
• With support rosettes<br />
Supplied with<br />
• 1 Pair of pull h<strong>and</strong>les<br />
• 1 Fixing set for glass doors<br />
• 1 Fixing set for aluminium <strong>and</strong> timber doors<br />
Finish<br />
Cat. No.<br />
Matt 903.01.122<br />
Packing: 1 set<br />
10<br />
New products <strong>and</strong> systems: www.hafele.com<br />
HMA 10.19
Architectural Hardware<br />
<strong>Door</strong> <strong>H<strong>and</strong>les</strong><br />
Pull h<strong>and</strong>le sets – Stainless steel<br />
• For glass, aluminium <strong>and</strong> timber doors with back to backfixing<br />
• M8 thread<br />
• For door thickness 8 – 50 mm<br />
• With support rosettes<br />
Supplied with<br />
• 1 Pair of pull h<strong>and</strong>les<br />
• 1 Fixing set for glass doors<br />
• 1 Fixing set for aluminium <strong>and</strong> timber doors<br />
Finish<br />
Cat. No.<br />
Matt 903.01.154<br />
Packing: 1 set<br />
• For glass, aluminium <strong>and</strong> timber doors with back to backfixing<br />
• M8 thread<br />
• For door thickness 8 – 50 mm<br />
• With support rosettes<br />
Supplied with<br />
• 1 Pair of pull h<strong>and</strong>les<br />
• 1 Fixing set for glass doors<br />
• 1 Fixing set for aluminium <strong>and</strong> timber doors<br />
Finish<br />
Cat. No.<br />
Matt 903.01.343<br />
Packing: 1 set<br />
• For glass, aluminium <strong>and</strong> timber doors with back to back fixing<br />
• M8 thread x 70 mm<br />
• For door thickness 8 – 50 mm<br />
Supplied with<br />
• 1 Pair of pull h<strong>and</strong>les<br />
• 1 Fixing set for glass doors<br />
• 1 Fixing set for aluminium <strong>and</strong> timber doors<br />
10<br />
Finish<br />
Cat. No.<br />
Matt 903.01.305<br />
Packing: 1 set<br />
• For glass, aluminium <strong>and</strong> timber doors with back to back fixing<br />
• M8 thread x 70 mm<br />
• For door thickness 8 – 50 mm<br />
Supplied with<br />
• 1 Pair of pull h<strong>and</strong>les<br />
• 1 Fixing set for glass doors<br />
• 1 Fixing set for aluminium <strong>and</strong> timber doors<br />
Finish<br />
Cat. No.<br />
Polished/matt 903.01.388<br />
Packing: 1 set<br />
We reserve the right to alter specifications without notice (HMA Basic 2011/12).<br />
HMA 10.20<br />
New products <strong>and</strong> systems: www.hafele.com
Architectural Hardware<br />
<strong>Door</strong> <strong>H<strong>and</strong>les</strong><br />
Pull h<strong>and</strong>le sets - Stainless steel<br />
• For glass, aluminium <strong>and</strong> timber doors with back to backfixing<br />
• M6 thread<br />
• For door thickness 8 – 50 mm<br />
Supplied with<br />
• 1 Pair of pull h<strong>and</strong>les<br />
• 1 Fixing set for glass doors<br />
• 1 Fixing set for aluminium <strong>and</strong> timber doors<br />
Finish<br />
Cat. No.<br />
Matt 903.00.100<br />
Packing: 1 set<br />
• For glass, aluminium <strong>and</strong> timber doors with back to backfixing<br />
• M8 thread<br />
• For door thickness 8 – 50 mm<br />
Supplied with<br />
• 1 Pair of pull h<strong>and</strong>les<br />
• 1 Fixing set for glass doors<br />
• 1 Fixing set for aluminium <strong>and</strong> timber doors<br />
Finish<br />
Cat. No.<br />
Matt 903.00.696<br />
Packing: 1 set<br />
We reserve the right to alter specifications without notice (HMA Basic 2011/12).<br />
• For glass, aluminium <strong>and</strong> timber doors with back to backfixing<br />
• M8 thread<br />
• For door thickness 8 – 50 mm<br />
Supplied with<br />
• 1 Pair of pull h<strong>and</strong>les<br />
• 1 Fixing set for glass doors<br />
• 1 Fixing set for aluminium <strong>and</strong> timber doors<br />
Finish<br />
Cat. No.<br />
Matt 903.00.685<br />
Packing: 1 set<br />
• For glass, aluminium <strong>and</strong> timber doors with back to backfixing<br />
• M6 thread<br />
• For door thickness 8 – 50 mm<br />
Supplied with<br />
• 1 Pair of pull h<strong>and</strong>les<br />
• 1 Fixing set for glass doors<br />
• 1 Fixing set for aluminium <strong>and</strong> timber doors<br />
Finish<br />
Cat. No.<br />
Matt 903.00.070<br />
Packing: 1 set<br />
10<br />
New products <strong>and</strong> systems: www.hafele.com<br />
HMA 10.21
Architectural Hardware<br />
<strong>Door</strong> <strong>H<strong>and</strong>les</strong><br />
Pull h<strong>and</strong>le sets - Stainless steel<br />
• For glass, aluminium <strong>and</strong> timber doors with back to backfixing<br />
• M6 thread<br />
• For door thickness 8 – 50 mm<br />
Supplied with<br />
• 1 Pair of pull h<strong>and</strong>les<br />
• 1 Fixing set for glass doors<br />
• 1 Fixing set for aluminium <strong>and</strong> timber doors<br />
Finish<br />
Cat. No.<br />
Matt 903.00.170<br />
Packing: 1 set<br />
• For glass, aluminium <strong>and</strong> timber doors with back to backfixing<br />
• M8 thread x 70 mm<br />
• For door thickness 8 – 50 mm<br />
Supplied with<br />
• 1 Pair of pull h<strong>and</strong>les<br />
• 1 Fixing set for glass doors<br />
• 1 Fixing set for aluminium <strong>and</strong> timber doors<br />
Finish<br />
Cat. No.<br />
Matt 903.99.358<br />
Packing: 1 set<br />
• For glass, aluminium <strong>and</strong> timber doors with back to backfixing<br />
• M8 thread x 70 mm<br />
• For door thickness 8 – 50 mm<br />
Supplied with<br />
• 1 Pair of pull h<strong>and</strong>les<br />
• 1 Fixing set for glass doors<br />
• 1 Fixing set for aluminium <strong>and</strong> timber doors<br />
10<br />
Finish<br />
Cat. No.<br />
Matt 903.99.323<br />
Packing: 1 set<br />
• For glass, aluminium <strong>and</strong> timber doors with back to backfixing<br />
• M8 thread x 70 mm<br />
• For door thickness 8 – 50 mm<br />
Supplied with<br />
• 1 Pair of pull h<strong>and</strong>les<br />
• 1 Fixing set for glass doors<br />
• 1 Fixing set for aluminium <strong>and</strong> timber doors<br />
Finish<br />
Cat. No.<br />
Matt 903.99.340<br />
Packing: 1 set<br />
We reserve the right to alter specifications without notice (HMA Basic 2011/12).<br />
HMA 10.22<br />
New products <strong>and</strong> systems: www.hafele.com
Architectural Hardware<br />
<strong>Door</strong> <strong>H<strong>and</strong>les</strong><br />
Pull h<strong>and</strong>le sets - Brass<br />
• For glass, aluminium <strong>and</strong> timber doors with back to back fixing<br />
• For single or back to back fixing<br />
Supplied with<br />
• 1 Piece of pull h<strong>and</strong>les<br />
• 1 Fixing set for glass doors<br />
• 1 Fixing set for aluminium <strong>and</strong> timber doors<br />
Finish<br />
Cat. No.<br />
Polished/matt 901.02.515<br />
Chrome polished/stainless steel coloured matt 901.02.510<br />
Packing: 1 set<br />
<br />
<br />
• For glass, aluminium <strong>and</strong> timber doors with back to back fixing<br />
• For single or back to back fixing<br />
Supplied with<br />
• 1 Piece of pull h<strong>and</strong>les<br />
• 1 Fixing set for glass doors<br />
• 1 Fixing set for aluminium <strong>and</strong> timber doors<br />
Finish<br />
Cat. No.<br />
Polished/matt 901.02.505<br />
Chrome polished/stainless steel coloured matt 901.02.500<br />
Packing: 1 set<br />
<br />
<br />
• For glass, aluminium <strong>and</strong> timber doors with back to back fixing<br />
• For single or back to back fixing<br />
Supplied with<br />
• 1 Piece of pull h<strong>and</strong>les<br />
• 1 Fixing set for glass doors<br />
We reserve the right to alter specifications without notice (HMA Basic 2011/12).<br />
Fixing material for pull h<strong>and</strong>le 901.02.528<br />
• 1 Fixing set for aluminium <strong>and</strong> timber doors<br />
Finish<br />
Cat. No.<br />
Polished, PVD 901.02.528<br />
Packing: 1 set<br />
Cat. No.<br />
Fixing System for Glass <strong>Door</strong>s 909.20.010<br />
Fixing System for Aluminium <strong>and</strong> Timber <strong>Door</strong>s 909.20.110<br />
Fixing System for Aluminium, PVC <strong>and</strong> Timber 909.20.930<br />
<strong>Door</strong><br />
10<br />
New products <strong>and</strong> systems: www.hafele.com<br />
HMA 10.23
Architectural Hardware<br />
<strong>Door</strong> <strong>H<strong>and</strong>les</strong><br />
Pull h<strong>and</strong>le sets – Brass<br />
• For timber doors<br />
• For door thickness 37 – 52 mm<br />
Supplied with<br />
• 1 Piece of pull h<strong>and</strong>le<br />
• 1 Fixing set<br />
• For timber doors<br />
• For door thickness 37 – 52 mm<br />
Supplied with<br />
• 1 Piece of pull h<strong>and</strong>le<br />
• 1 Fixing set<br />
Finish<br />
Cat. No.<br />
Polished 901.01.241<br />
Packing: 1 pc.<br />
Finish<br />
Cat. No.<br />
Polished 901.01.251<br />
Packing: 1 pc.<br />
Pull h<strong>and</strong>le sets – Brass<br />
10<br />
• For timber doors<br />
• For door thickness 37 – 52 mm<br />
Supplied with<br />
• 1 Piece of pull h<strong>and</strong>le<br />
• 1 Fixing set<br />
Finish<br />
Cat. No.<br />
Polished 901.01.271<br />
Packing: 1 pc.<br />
• For timber doors<br />
• For door thickness 37 – 52 mm<br />
Supplied with<br />
• 1 Piece of pull h<strong>and</strong>le<br />
• 1 Fixing set<br />
Finish<br />
Cat. No.<br />
Polished 901.01.261<br />
Packing: 1 pc.<br />
We reserve the right to alter specifications without notice (HMA Basic 2011/12).<br />
HMA 10.24<br />
New products <strong>and</strong> systems: www.hafele.com
Architectural Hardware<br />
<strong>Locking</strong> <strong>and</strong> <strong>Security</strong><br />
Heavy duty mortise lock (project type)<br />
• For flush timber or steel doors<br />
• Prepared for profile cylinders<br />
• According to DIN 18 251 part 1 category 3<br />
• With key action<br />
• Deadbolt 2-turn<br />
• Reversible latch to DIN left <strong>and</strong> right h<strong>and</strong><br />
Technical data<br />
Lever follower: 8mm<br />
Distance: 72 mm<br />
Backset: 55 mm<br />
Supplied with<br />
1 Mortise lock<br />
1 Striking plate<br />
1 Set of fixing material<br />
<br />
Material Finish Cat. No.<br />
Stainless steel Matt 900.99.441<br />
Brass plated polished 900.99.442<br />
Antique copper 911.02.193<br />
Antique brass 911.02.194<br />
Packing: 1 set<br />
Heavy duty silent mortise lock<br />
We reserve the right to alter specifications without notice (HMA Basic 2011/12).<br />
• With splitted latch for silence<br />
• With noise absorbtion pads inside the lock<br />
• For flush timber or steel doors<br />
• Prepared for profile cylinders<br />
• According to DIN 18 251 part 1 category 3<br />
• With key action<br />
• Deadbolt 2-turn<br />
• Non reversible latch<br />
• Available with DIN left <strong>and</strong> right h<strong>and</strong><br />
Technical data<br />
Lever follower: 8 mm<br />
Distance: 72 mm<br />
Backset: 55 mm<br />
Supplied with<br />
1 Mortise lock<br />
1 Striking plate<br />
1 Set of fixing material<br />
Material Finish DIN right h<strong>and</strong> DIN left h<strong>and</strong><br />
Stainless steel Matt 911.02.181 911.02.180<br />
Packing: 1 set<br />
10<br />
New products <strong>and</strong> systems: www.hafele.com<br />
HMA 10.25
Architectural Hardware<br />
<strong>Locking</strong> <strong>and</strong> <strong>Security</strong><br />
Mortise lock (entrance)<br />
<br />
• For flush timber or steel doors<br />
• Prepared for profile cylinders<br />
• According to DIN 18 250 part 3<br />
• With key action<br />
• Deadbolt 2-turn<br />
• Reversible latch<br />
Technical data<br />
Lever follower: 8 mm<br />
Distance: 72 mm<br />
Backset: 55 mm<br />
Supplied with<br />
1 Mortise lock<br />
1 Striking plate<br />
1 Set of fixing material<br />
1 Plastic striking box<br />
Material Finish Cat. No.<br />
Stainless steel Matt 911.02.153<br />
Brass plated polished 911.02.154<br />
Antique copper 911.02.169<br />
Antique brass 911.02.168<br />
Packing: 1 set<br />
Mortise lock (bathroom)<br />
• For flush timber or steel doors<br />
• Prepared for 8 mm spindle<br />
• According to DIN 18 251<br />
• Deadbolt 1-turn<br />
• Reversible latch<br />
Technical data<br />
10<br />
<br />
<br />
Lever follower <strong>and</strong> spindle follower:<br />
Distance: 78 mm<br />
Backset: 55 mm<br />
Supplied with<br />
1 Mortise lock<br />
1 Striking plate<br />
1 Set of fixing material<br />
1 Plastic striking box<br />
8 mm<br />
Material Finish Cat. No.<br />
Stainless steel Matt 911.02.157<br />
Brass plated polished 911.02.158<br />
Packing: 1 set<br />
We reserve the right to alter specifications without notice (HMA Basic 2011/12).<br />
HMA 10.26<br />
New products <strong>and</strong> systems: www.hafele.com
Architectural Hardware<br />
<strong>Locking</strong> <strong>and</strong> <strong>Security</strong><br />
Mortise lock for tubular door frames<br />
• For tubular door frames of metal, timber or plastic<br />
• Prepared for profile cylinders<br />
• With key action<br />
• Deadbolt 1-turn<br />
• Suitable for DIN left <strong>and</strong> right h<strong>and</strong><br />
Technical data<br />
Lever follower: 8mm<br />
Distance: 92 mm<br />
Backset<br />
Cat. No.<br />
18 mm 911.75.011<br />
24 mm 911.75.017<br />
30 mm 911.75.021<br />
35 mm 911.75.023<br />
40 mm 911.75.025<br />
45 mm 911.75.027<br />
Note<br />
Please order striking plate separately. (see page 9.34)<br />
Mortise latch lock<br />
• For rebated timber doors<br />
• Prepared for spindle 8 mm<br />
Technical data<br />
Lever follower: 8mm<br />
Backset: 55 mm<br />
Material Finish Right h<strong>and</strong> Left h<strong>and</strong><br />
Stainless Matt 911.23.143 911.23.142<br />
steel Brass plated polished, 911.23.145 911.23.144<br />
<br />
protective lacquered<br />
<br />
<br />
We reserve the right to alter specifications without notice (HMA Basic 2011/12).<br />
Mortise latch lock<br />
• For flush timber doors<br />
• Prepared for spindle 8 mm<br />
• Suitable for DIN left <strong>and</strong> right h<strong>and</strong><br />
• According to BS 4951<br />
Technical data<br />
Lever follower: 8mm<br />
Backset: 55 mm<br />
Material Finish Cat. No.<br />
Stainless steel Matt 911.23.270<br />
10<br />
New products <strong>and</strong> systems: www.hafele.com<br />
HMA 10.27
Architectural Hardware<br />
<strong>Locking</strong> <strong>and</strong> <strong>Security</strong><br />
Mortise deadbolt lock<br />
• For timber door<br />
• Prepared for profile cylinders <strong>and</strong> 8 mm spindle<br />
• According to BS 4951<br />
• Deadbolt 2-turn<br />
• Suitable for DIN left <strong>and</strong> right h<strong>and</strong><br />
Technical data<br />
Lever follower: 8 mm<br />
Backset: 55 mm<br />
Verrsion<br />
Cat. No.<br />
Prepared for bathroom/wc 911.22.403<br />
Prepared for profile cylinder 911.22.368<br />
Mortise deadbolt lock<br />
• For timber door<br />
• Prepared for profile cylinders<br />
• Deadbolt 2-turn<br />
• Suitable for DIN left <strong>and</strong> right h<strong>and</strong><br />
Technical data<br />
Backset: 55 mm<br />
<br />
<br />
Material Finish Cat. No.<br />
Stainless Matt 911.22.297<br />
steel<br />
Brass plated polished, 911.22.298<br />
<br />
protective lacquered<br />
Mortise deadbolt lock<br />
10<br />
<br />
<br />
• For timber door<br />
• Prepared for profile cylinders<br />
• Deadbolt 1-turn<br />
• Suitable for DIN left <strong>and</strong> right h<strong>and</strong><br />
Dimension<br />
Stainless steel<br />
Matt<br />
<br />
25 mm 911.22.271 911.22.272<br />
30 mm 911.22.274 911.22.275<br />
35 mm 911.22.277 911.22.278<br />
40 mm 911.22.280 911.22.281<br />
50 mm 911.22.286 –<br />
<br />
Brass plated polished,<br />
protective laquered<br />
We reserve the right to alter specifications without notice (HMA Basic 2011/12).<br />
HMA 10.28<br />
New products <strong>and</strong> systems: www.hafele.com
Architectural Hardware<br />
<strong>Locking</strong> <strong>and</strong> <strong>Security</strong><br />
Mortise lock for sliding tubular door frames<br />
• For tubular door frames of metal, timber or plastic<br />
• Prepared for profile cylinders<br />
• With hook pivot bolt<br />
• Bolt 1-turn<br />
• Protection against sawing by steel pin, inserted in hook pivot bolt<br />
Dimension<br />
Cat. No.<br />
30 mm 911.75.111<br />
35 mm 911.75.113<br />
Flat striking plate<br />
• For metal, timber or plastic frames<br />
• For tubular door frame<br />
• Suitable for DIN left <strong>and</strong> right h<strong>and</strong><br />
Material Finish Cat. No.<br />
Stainless steel (304) Matt 911.76.026<br />
Mortise pull h<strong>and</strong>le for sliding door<br />
• For timber door<br />
Material Finish Cat. No.<br />
Stainless steel Matt 911.26.012<br />
Brass plated polished 911.26.013<br />
We reserve the right to alter specifications without notice (HMA Basic 2011/12).<br />
<br />
<br />
<br />
• For timber door<br />
Material Finish Cat. No.<br />
Stainless steel New silver colour anodized 911.26.070<br />
Gold colour anodized 911.26.071<br />
Silver coloured 911.26.077<br />
10<br />
New products <strong>and</strong> systems: www.hafele.com<br />
HMA 10.29
Architectural Hardware<br />
<strong>Locking</strong> <strong>and</strong> <strong>Security</strong><br />
Mortise lock for sliding door<br />
• For timber doors<br />
• Prepared for bathroom/wc<br />
• With compass bolt<br />
Technical data<br />
Backset: 50 mm<br />
Min. door thickness: 38 mm<br />
<br />
Material Finish Cat. No.<br />
Brass Nickel plated matt 911.26.084<br />
Chrome plated polished 911.26.085<br />
Polished 911.26.086<br />
Burnished 911.26.087<br />
Flush h<strong>and</strong>le<br />
Front h<strong>and</strong>le<br />
Mortise lock for sliding door<br />
• For timber doors<br />
• Prepared for bathroom/wc<br />
• With compass bolt<br />
Technical data<br />
Backset: 50 mm<br />
Min. door thickness: 38 mm<br />
<br />
Material Finish Cat. No.<br />
Brass Nickel plated matt 911.26.092<br />
Chrome plated polished 911.26.093<br />
Polished 911.26.094<br />
Burnished 911.26.095<br />
Flush h<strong>and</strong>le<br />
10<br />
Mortise lock for sliding door<br />
<br />
<br />
• For timber doors<br />
• Prepared for profile cylinders<br />
• With compass bolt<br />
Technical data<br />
Backset: 55 mm<br />
Material Finish Cat. No.<br />
Stainless Matt 911.26.021<br />
steel<br />
Brass plated polished, 911.26.022<br />
<br />
protective lacquered<br />
We reserve the right to alter specifications without notice (HMA Basic 2011/12).<br />
HMA 10.30<br />
New products <strong>and</strong> systems: www.hafele.com
Architectural Hardware<br />
<strong>Locking</strong> <strong>and</strong> <strong>Security</strong><br />
Mortise swing door latch<br />
<br />
<br />
• For non-rebated wooden doorst<br />
• Rolling latch not lockable<br />
• Screw fixing of forend <strong>and</strong> striking plate<br />
Technical data<br />
Rolling latch adjustable: From 2 – 11 mm<br />
Forend width: 22 mm<br />
Supplied with<br />
1 Striking plate<br />
1 Set of fixing material<br />
Material Finish Cat. No.<br />
Stainless steel Matt 911.24.010<br />
Brass plated polished 911.24.011<br />
Mortise latch<br />
• For timber doors<br />
• Prepared for 8 mm spindle<br />
• Suitable for DIN left <strong>and</strong> rigth h<strong>and</strong><br />
Technical data<br />
Lever follower: 8 mm<br />
Backset: 60 mm<br />
Material Finish Cat. No.<br />
Stainless steel (304) Matt 911.23.172<br />
Brass plated polished 911.23.173<br />
Mortise bolt<br />
• For timber doors<br />
• Prepared for 8 mm spindle<br />
• Suitable for DIN left <strong>and</strong> rigth h<strong>and</strong><br />
Technical data<br />
Lever follower:<br />
Backset: 60 mm<br />
8 mm<br />
We reserve the right to alter specifications without notice (HMA Basic 2011/12).<br />
Flat striking plate<br />
Material Finish Cat. No.<br />
Stainless steel (304) Matt 911.22.406<br />
Brass plated polished 911.22.407<br />
• For metal, plastic or timber frames<br />
• For tubular door frames<br />
• Suitable for DIN left <strong>and</strong> right h<strong>and</strong><br />
• Screw fixing<br />
Material Finish Cat. No.<br />
Stainless steel (304) Matt 911.76.011<br />
10<br />
New products <strong>and</strong> systems: www.hafele.com<br />
HMA 10.31
Architectural Hardware<br />
<strong>Locking</strong> <strong>and</strong> <strong>Security</strong><br />
Flanged striking plate<br />
• For metal, plastic or timber frames<br />
• For flush doors<br />
• Lug straight<br />
• Suitable for DIN left <strong>and</strong> right h<strong>and</strong><br />
• Screw fixing<br />
Material Finish Cat. No.<br />
Stainless steel Matt 911.39.810<br />
Brass polished 911.39.812<br />
Antique copper 911.39.813<br />
Antique brass 911.39.814<br />
Striking plate<br />
• For timber frames<br />
• For rebated <strong>and</strong> flush doors<br />
• Suitable for DIN left <strong>and</strong> right h<strong>and</strong><br />
• Screw fixing<br />
Material Finish Cat. No.<br />
Stainless steel (304) Matt 911.39.332<br />
Brass plated polished,<br />
protective lacquered<br />
911.39.333<br />
Flanged striking plate<br />
• For timber frames<br />
• For flush doors<br />
• Suitable for DIN left <strong>and</strong> right h<strong>and</strong><br />
• Lug angled<br />
• Screw fixing<br />
Material Finish Cat. No.<br />
Stainless steel (304) Matt 911.39.322<br />
Brass plated polished,<br />
protective lacquered<br />
911.39.323<br />
Striking plate plastic box<br />
10<br />
Adjustment spindle for lever h<strong>and</strong>le<br />
• For striking plates<br />
• For deabolt 2-turn<br />
• Suitable for DIN left <strong>and</strong> right h<strong>and</strong><br />
• Screw fixing<br />
Material Colour Cat. No.<br />
Plastic White 911.76.060<br />
Black 911.76.061<br />
• Mounting accessories for door h<strong>and</strong>le<br />
• For installation into the lever follower<br />
Material<br />
• Steel bright<br />
Adjustment from<br />
Cat. No.<br />
7 – 8 mm 909.40.500<br />
8 – 9 mm 909.40.501<br />
9 – 10 mm 909.40.502<br />
We reserve the right to alter specifications without notice (HMA Basic 2011/12).<br />
HMA 10.32<br />
New products <strong>and</strong> systems: www.hafele.com
Architectural Hardware<br />
<strong>Locking</strong> <strong>and</strong> <strong>Security</strong><br />
Routing tool<br />
• For the rational fitting of mortise locks.<br />
• Also ideal for on-the-spot fitting<br />
• Made for small quantity of router jobs<br />
• Continuously adjustable for all common door thicknesses<br />
• Maximum routing depth 90 mm, extendable with 285 mm shaft<br />
• To be used with a normal electric drill with 13 mm chuck<br />
• With transport case<br />
Supplied with<br />
1 Routing gauge<br />
1 Shaft length 220 mm<br />
1 Router Ø 18 mm<br />
1 Router Ø 20 mm<br />
1 Router Ø 24 mm<br />
1 Depth stop<br />
1 3 mm Allen key<br />
1 Transport case<br />
Cat. No.<br />
Routing tool 001.67.710<br />
Shaft<br />
Length<br />
Cat. No.<br />
220 mm 001.67.707<br />
285 mm 001.67.708<br />
Router<br />
Router diameter<br />
Cat. No.<br />
16.0 mm 001.67.702<br />
18.0 mm 001.67.718<br />
19.0 mm 001.67.703<br />
20.0 mm 001.67.720<br />
22.2 mm 001.67.704<br />
24.0 mm 001.67.724<br />
25.4 mm 001.67.705<br />
We reserve the right to alter specifications without notice (HMA Basic 2011/12).<br />
Housing kit<br />
Housing kit for rebated doors<br />
Material<br />
Cat. No.<br />
Aluminium 001.67.706<br />
Material<br />
Cat. No.<br />
Aluminium 001.67.713<br />
Packing: 1 pc.<br />
Note<br />
For rebated doors is a special housing kit available.<br />
With this housing kit it is possible to router with a st<strong>and</strong>ard set<br />
an rebated doors as well.<br />
10<br />
New products <strong>and</strong> systems: www.hafele.com<br />
HMA 10.33
Architectural Hardware<br />
<strong>Locking</strong> <strong>and</strong> <strong>Security</strong><br />
Light duty lockset<br />
• For flush timber or steel doorst<br />
• Suitable for door leaf thickness: 35 – 45 mm<br />
• Cylinder with 5 pin tumblers<br />
• Knob diameter: 51 mm<br />
• Rosette diameter: 65 mm<br />
• Backset: 60 mm<br />
Supplied with<br />
1 Knob lockset<br />
1 Latch<br />
1 Striking plate<br />
1 Assembly key<br />
1 Set of fixing material<br />
1 Set of installation instruction<br />
For entrance<br />
Outside<br />
Inside<br />
• Outside: Turn knob with cylinder<br />
• Inside: Turn knob with push button, can be fixed in position<br />
• With deadlocking latch<br />
Function<br />
• Latch bolt by knob either side. Except when turn button locks outside<br />
knob. Pushing turn button in - locks outside knob requiring use of key<br />
outside to unlock. Turning inside knob unlocks outside knob. Pushing in<br />
<strong>and</strong> turning button - locks outside knob requiring key at all times. Turning<br />
inside knob does not unlock outside until button in manually turned to<br />
unlocked position. Inside knob always free. With dead locking latch.<br />
Finish<br />
Cat. No.<br />
Stainless steel 489.10.000<br />
Antique brass 489.10.001<br />
Brass polished 489.10.002<br />
Packing: 1 set<br />
For bathroom/wc doors<br />
• Outside: Turn knob with emergency release slot<br />
• Inside: Turn knob with push button<br />
Function<br />
• <strong>Locking</strong> from inside with push button. Opening from outside with turn<br />
10<br />
Outside<br />
For passage<br />
Outside<br />
Inside<br />
Inside<br />
knob - when locked from inside - emergency slot in outside knob to<br />
operate with a flat object (coin). Push button released by turning inside<br />
knob or closing the door.<br />
Finish<br />
Cat. No.<br />
Stainless steel 489.10.003<br />
Antique brass 489.10.004<br />
Brass polished 489.10.005<br />
Packing: 1 set<br />
• Outside: Turn knobt<br />
• Inside: Turn knob<br />
Function<br />
• Opening from outside <strong>and</strong> inside by turning the knob<br />
Finish<br />
Cat. No.<br />
Stainless steel 489.10.006<br />
Antique brass 489.10.007<br />
Brass polished 489.10.008<br />
Packing: 1 set<br />
We reserve the right to alter specifications without notice (HMA Basic 2011/12).<br />
HMA 10.34<br />
New products <strong>and</strong> systems: www.hafele.com
Architectural Hardware<br />
<strong>Locking</strong> <strong>and</strong> <strong>Security</strong><br />
Economy single deadbolt light duty<br />
• For flush timber or steel doors<br />
• Suitable for DIN left <strong>and</strong> right h<strong>and</strong><br />
• Suitable for door panel thickness: 35 – 45 mm<br />
• Outside: Cylinder with 5 pin tumblers<br />
• Inside: Thumbturn<br />
• Deadbolt 1-turn 25 mm pre-lockable<br />
• Backset (bolt) adjustable: 60/70 mm<br />
Finish<br />
Cat. No.<br />
Stainless steel (304) 911.22.395<br />
Brass polished 911.22.396<br />
Antique copper 911.22.397<br />
Antique brass 911.22.398<br />
Economy double deadbolt light duty<br />
• For flush timber or steel doors<br />
• Suitable for DIN left <strong>and</strong> right h<strong>and</strong><br />
• Suitable for door leaf thickness: 35 – 45 mm\<br />
• Deadbolt 1-turn 25 mm pre-lockable<br />
• Cylinder with 5 pin tumblers<br />
• Backset (bolt) adjustable: 60/70 mm<br />
Finish<br />
Cat. No.<br />
Stainless steel (304) 911.64.229<br />
Brass polished 911.64.228<br />
Antique copper 911.64.231<br />
Antique brass 911.64.230<br />
We reserve the right to alter specifications without notice (HMA Basic 2011/12).<br />
Knob lockset combined with single deadbolt set<br />
• For flush timber or steel doors<br />
• Suitable for door leaf thickness: 35 – 48 mm<br />
• Cylinder with 5 pin tumblers<br />
• Rosette diameter: 65 mm<br />
• Backset: 60 mm<br />
Supplied with<br />
• 1 Knob lockset<br />
• 1 Latch<br />
• 1 Striking plate<br />
• 4 Keys<br />
• 1 Set of fixing material<br />
• 1 Set of deadbolt<br />
Finish<br />
Cat. No.<br />
Stainless steel matt 489.93.009<br />
Brass polished 489.93.809<br />
Antique copper 489.93.309<br />
Antique brass 489.93.409<br />
Packing: 1 set<br />
10<br />
New products <strong>and</strong> systems: www.hafele.com<br />
HMA 10.35
Architectural Hardware<br />
<strong>Locking</strong> <strong>and</strong> <strong>Security</strong><br />
Antique knob lockset<br />
• For flush timber or steel doors<br />
• Suitable for door leaf thickness: 35 – 48 mm<br />
• Cylinder with 5 pin tumblers<br />
• Rosette diameter: 65 mm<br />
• Backset: 60 mm<br />
Supplied with<br />
• 1 Knob lockset<br />
• 1 Latch<br />
• 1 Striking plate<br />
• 3 Keys<br />
• 1 Set of fixing material<br />
For bathroom/wc doors<br />
Finish<br />
Cat. No.<br />
Antique copper 489.93.308<br />
Packing: 1 set<br />
For entrance doors<br />
Finish<br />
Cat. No.<br />
Antique copper 489.93.307<br />
Packing: 1 set<br />
Light duty tomato shape knob lockset<br />
10<br />
• For flush timber or steel doors<br />
• Suitable for door leaf thickness: 35 – 48 mm<br />
• Cylinder with 5 pin tumblers<br />
• Knob diameter: 51 mm<br />
• Rosette diameter: 75 mm<br />
• Backset: 60 mm<br />
Supplied with<br />
• 1 Knob lockset<br />
• 1 Latch<br />
• 1 Striking plate<br />
• 3 Keys<br />
• 1 Set of fixing material<br />
For entrance doors<br />
Finish<br />
Cat. No.<br />
Stainless steel matt/polished 489.10.009<br />
Antique brass 489.93.403<br />
Packing: 1 set<br />
For bathroom/wc doors<br />
Finish<br />
Cat. No.<br />
Stainless steel matt/polished 489.10.010<br />
Antique brass 489.93.404<br />
Packing: 1 set<br />
We reserve the right to alter specifications without notice (HMA Basic 2011/12).<br />
HMA 10.36<br />
New products <strong>and</strong> systems: www.hafele.com
Architectural Hardware<br />
<strong>Locking</strong> <strong>and</strong> <strong>Security</strong><br />
Knob lockset st<strong>and</strong>ard duty<br />
• For flush timber or steel doors<br />
• Suitable for door leaf thickness (b): 35 – 45 mm<br />
• Safety bolt prevents the latchto be pushed back, e.g. by a<br />
credit card<br />
Backset (a): 60 mm<br />
Cylinder<br />
• For st<strong>and</strong>ard locking with 6 pin tumblers<br />
Supplied with<br />
1 Knob lockset<br />
1 Latch<br />
1 Striking plate<br />
1 Assembly key<br />
1 Set of fixing material<br />
1 Set of installation instruction<br />
Finish Version Cat. No.<br />
Stainless steel Entrance 489.10.011<br />
WC 489.93.019<br />
Passage 489.93.020<br />
Patio 489.93.021<br />
b = door leaf thickness<br />
Latch<br />
Striking plate<br />
Installation in steel doors<br />
We reserve the right to alter specifications without notice (HMA Basic 2011/12).<br />
a = Backset, 60mm<br />
10<br />
New products <strong>and</strong> systems: www.hafele.com<br />
HMA 10.37
Architectural Hardware<br />
<strong>Locking</strong> <strong>and</strong> <strong>Security</strong><br />
Latch for 70 mm backset<br />
• Suitable for knob locksets, st<strong>and</strong>ard duty<br />
• Optional with or without security pin<br />
• Backset: 70 mm<br />
<strong>Security</strong> pin<br />
Finish With security pin Without security pin<br />
Stainless steel (304) 911.64.298 911.64.302<br />
Brass polished 911.64.299 911.64.303<br />
Antique copper 911.64.300 911.64.304<br />
Antique brass 911.64.301 911.64.305<br />
Packing: 1 pc.<br />
Extension link with connecting sleeve<br />
• Suitable for knob locksets<br />
• Extension of latch by 50 mm<br />
Latch<br />
Extension<br />
Backset: 60 mm Backset: 117 mm<br />
Backset: 70 mm Backset: 127 mm<br />
Supplied with<br />
1 Extension link<br />
1 Sleeve<br />
Finish<br />
Cat. No.<br />
Steel yellow chromatized 911.64.032<br />
Packing: 1 pc.<br />
Deadbolt st<strong>and</strong>ard duty<br />
• For flush woden or steel doors<br />
• Suitable for DIN left h<strong>and</strong> <strong>and</strong> DIN right h<strong>and</strong><br />
• Suitable for door thickness: 35 – 45 mm<br />
• With 6 pin cylinder<br />
• Deadbolt 1-turn 25 mm pre-lockable<br />
• Backset: 60 mm<br />
Supplied with<br />
1 Lockcase with bolt part<br />
1 Striking plate<br />
1 Striking box<br />
1 Set of fixing material<br />
Single deadbolt<br />
10<br />
Double deadbolt<br />
65<br />
28 a 9 26<br />
a=door leaf thickness<br />
57<br />
Finish<br />
Cat. No.<br />
Stainless steel 911.64.274<br />
Brass polished 911.64.275<br />
Antique copper 911.64.276<br />
Antique brass 911.64.277<br />
26<br />
40<br />
22<br />
25<br />
Bolt part<br />
Finish<br />
Cat. No.<br />
Stainless steel 911.64.278<br />
Brass polished 911.64.279<br />
Antique copper 911.64.280<br />
Antique brass 911.64.281<br />
60<br />
84<br />
23<br />
We reserve the right to alter specifications without notice (HMA Basic 2011/12).<br />
HMA 10.38<br />
New products <strong>and</strong> systems: www.hafele.com
Architectural Hardware<br />
<strong>Locking</strong> <strong>and</strong> <strong>Security</strong><br />
Tubular lever h<strong>and</strong>le locks<br />
• For flush timer or steel door<br />
• Suitable for DIN right <strong>and</strong> DIN left<br />
• For door thickness: 35 – 48 mm<br />
• Rosette diameter: 65 mm<br />
• Adjustable latch 60 – 70 mm<br />
Finish Version Cat. No.<br />
Satin nickel Entrance 489.10.202<br />
WC 489.10.203<br />
Antique brass Entrance 489.10.204<br />
WC 489.10.205<br />
Packing: 1 pc.<br />
• For flush timer or steel door<br />
• For door thickness: 35 – 48 mm<br />
• Rosette diameter: 75 mm<br />
• Backset: 60 mm<br />
Finish Version DIN Cat. No.<br />
Stainless steel Entrance Right 489.10.098<br />
Left 489.10.099<br />
WC Right 489.10.104<br />
Left 489.10.105<br />
Packing: 1 pc.<br />
• For flush timer or steel door<br />
• For door thickness: 35 – 48 mm<br />
• Rosette diameter: 75 mm<br />
• Backset: 60 mm<br />
Finish Version DIN Cat. No.<br />
Stainless steel Entrance Right 489.10.086<br />
Left 489.10.087<br />
WC Right 489.10.092<br />
Left 489.10.093<br />
Packing: 1 pc.<br />
We reserve the right to alter specifications without notice (HMA Basic 2011/12).<br />
Cylindrical lever h<strong>and</strong>le locks<br />
• For flush timer or steel door<br />
• Suitable for DIN right <strong>and</strong> DIN left<br />
• For door thickness: 35 – 48 mm<br />
• Rosette diameter: 75 mm<br />
• Backset: 60 mm<br />
Finish Version Cat. No.<br />
Stainless steel Entrance 489.10.029<br />
WC 489.10.030<br />
Passage 489.10.031<br />
Satin brass Entrance 489.10.146<br />
WC 489.10.147<br />
Packing: 1 pc.<br />
10<br />
New products <strong>and</strong> systems: www.hafele.com<br />
HMA 10.39
Architectural Hardware<br />
<strong>Locking</strong> <strong>and</strong> <strong>Security</strong><br />
Entrance grip set<br />
• For flush timber doors<br />
• Suitable for DIN right <strong>and</strong> DIN left<br />
• For door thickness: 35 – 55 mm<br />
Supplied with:<br />
1 set of grip h<strong>and</strong>les<br />
1 set of mortise lock<br />
1 set of profile cylinder<br />
1 set of striking plate<br />
3 keys<br />
1 set of fixing material<br />
Finish<br />
Cat. No.<br />
Satin brass 499.94.020<br />
Antique brass 499.94.021<br />
Packing: 1 set<br />
Finish<br />
Cat. No.<br />
Satin brass 499.94.040<br />
Antique brass 499.94.041<br />
Packing: 1 set<br />
Finish<br />
Cat. No.<br />
Antique nickel 499.94.000<br />
Antique coffee copper 499.94.001<br />
Satin brass 499.94.002<br />
Antique silver 499.94.003<br />
Finish<br />
Cat. No.<br />
Satin nickel 499.94.080<br />
Antique brass 499.94.081<br />
Satin brass 499.94.082<br />
Packing: 1 set<br />
Packing: 1 set<br />
10<br />
Finish<br />
Cat. No.<br />
Antique silver 499.94.100<br />
Antique nickel 499.94.101<br />
Antique coffee copper 499.94.102<br />
Packing: 1 set<br />
Finish<br />
Cat. No.<br />
Antique nickel 499.94.120<br />
Antique brass 499.94.121<br />
Satin brass 499.94.122<br />
Packing: 1 set<br />
We reserve the right to alter specifications without notice (HMA Basic 2011/12).<br />
HMA 10.40<br />
New products <strong>and</strong> systems: www.hafele.com
Architectural Hardware<br />
<strong>Locking</strong> <strong>and</strong> <strong>Security</strong><br />
Entrance grip set<br />
• For flush timber doors<br />
• Suitable for door leaf thickness: 35 – 50 mm<br />
• Cylinder with 5 pin tumblers<br />
• Suitable for right h<strong>and</strong> <strong>and</strong> left h<strong>and</strong><br />
• Backset (adjustable): 60 or 70 mm<br />
Supplied with<br />
1 Set of grip h<strong>and</strong>les<br />
1 Set of deadbolt<br />
1 Set of striking plates<br />
3 Keys<br />
1 Set of fixing material<br />
101.5<br />
Entrance version<br />
Finish<br />
Cat. No.<br />
Antique copper 489.94.303<br />
Antique brass 489.94.403<br />
Packing: 1 set<br />
325<br />
Dummy version<br />
Finish<br />
Cat. No.<br />
Antique copper 489.94.323<br />
Antique brass 489.94.423<br />
Packing: 1 set<br />
Entrance version<br />
Finish<br />
Cat. No.<br />
Satin nickel 489.94.607<br />
Brass polished, PVD 489.94.807<br />
Antique brass 489.94.407<br />
Packing: 1 set<br />
Dummy version<br />
We reserve the right to alter specifications without notice (HMA Basic 2011/12).<br />
Finish<br />
Cat. No.<br />
Satin nickel 489.94.627<br />
Brass polished, PVD 489.94.827<br />
Antique brass 489.94.427<br />
Packing: 1 set<br />
Entrance version<br />
Finish<br />
Cat. No.<br />
Satin nickel 489.94.609<br />
Brass polished, PVD 489.94.809<br />
Antique copper 489.94.309<br />
Antique brass 489.94.409<br />
Packing: 1 set<br />
Dummy version<br />
Finish<br />
Cat. No.<br />
Satin nickel 489.94.629<br />
Brass polished, PVD 489.94.829<br />
Antique copper 489.94.329<br />
Antique brass 489.94.429<br />
Packing: 1 set<br />
10<br />
New products <strong>and</strong> systems: www.hafele.com<br />
HMA 10.41
Architectural Hardware<br />
<strong>Locking</strong> <strong>and</strong> <strong>Security</strong><br />
Economy double profile cylinder<br />
• With 5 pin tumblers<br />
Supplied with<br />
1 Double profile cylinder<br />
3 Keys<br />
1 Fastening screw<br />
Length A Length B Length C Brass, nickel plated Brass, polished Antique brass Antique copper<br />
30 mm 30 mm 60 mm 916.95.106 916.95.108 916.95.101 916.95.105<br />
32.5 mm 32.5 mm 65 mm 916.95.116 916.95.118 916.95.111 916.95.115<br />
35.5 mm 35.5 mm 71 mm 916.95.126 916.95.128 916.95.121 916.95.125<br />
Economy single profile cylinder<br />
• With 5 pin tumblers<br />
Supplied with<br />
1 Single profile cylinder<br />
3 Keys<br />
1 Fastening screw<br />
Length A Length B Length C Brass, nickel plated Brass, polished Antique brass Antique copper<br />
30 mm 10 mm 40 mm 916.95.006 916.95.008 916.95.001 916.95.005<br />
10<br />
Economy double profile cylinder with thumbturn<br />
• With 5 pin tumblers<br />
• One side lock function<br />
• One side thumbturn<br />
Supplied with<br />
1 Double profile cylinder<br />
3 Keys<br />
1 Fastening screw<br />
Length A Length B Length C Brass, nickel plated Brass, polished Antique brass Antique copper<br />
30 mm 30 mm 60 mm 916.95.306 916.95.308 916.95.301 916.95.305<br />
32.5 mm 32.5 mm 65 mm 916.95.316 916.95.318 916.95.311 916.95.315<br />
35.5 mm 35.5 mm 71 mm 916.95.326 916.95.328 916.95.321 916.95.325<br />
We reserve the right to alter specifications without notice (HMA Basic 2011/12).<br />
HMA 10.42<br />
New products <strong>and</strong> systems: www.hafele.com
Architectural Hardware<br />
<strong>Locking</strong> <strong>and</strong> <strong>Security</strong><br />
Economy single profile with thumbturn<br />
• With thumbturn<br />
Supplied with<br />
1 Single profile cylinder with thumbturn<br />
1 Fastening screw<br />
Length A Length B Length C Brass, nickel plated Brass, polished Antique brass Antique copper<br />
30 mm 10 mm 40 mm 916.95.206 916.95.208 916.95.201 916.95.205<br />
Economy double profile cylinder with emergency slot<br />
• One side emergency slot<br />
• Other side thumbturn<br />
• Suitable for toilet doors<br />
Supplied with<br />
1 Double profile cylinder with emergency slot<br />
1 Fastening screw<br />
Length A Length B Length C Brass, nickel plated Brass, polished Antique brass Antique copper<br />
30 mm 30 mm 60 mm 916.95.406 916.95.408 916.95.401 916.95.405<br />
32.5 mm 32.5 mm 65 mm 916.95.416 916.95.418 916.95.411 916.95.415<br />
35.5 mm 35.5 mm 71 mm 916.95.426 916.95.428 916.95.421 916.95.425<br />
We reserve the right to alter specifications without notice (HMA Basic 2011/12).<br />
Single profile cylinder with thumbturn<br />
Brass, nickel plated, aluminium thumbturn<br />
Brass, nickel plated, stainless steel thumbturn<br />
Brass, polished<br />
• With thumbturn<br />
Supplied with<br />
1 Single profile cylinder with thumbturn<br />
3 Steel keys, nickel plated<br />
1 Fastening screw<br />
Length A Length B Length C <br />
27.5 mm 10 mm 37.5 mm 916.08.451 916.08.651 916.08.851<br />
31.5 mm 10 mm 41.5 mm 916.08.452 916.08.652 916.08.852<br />
35.5 mm 10 mm 45.5 mm 916.08.453 916.08.653 916.08.853<br />
40.5 mm 10 mm 50.5 mm 916.08.454 916.08.654 916.08.854<br />
10<br />
New products <strong>and</strong> systems: www.hafele.com<br />
HMA 10.43
Architectural Hardware<br />
<strong>Locking</strong> <strong>and</strong> <strong>Security</strong><br />
Single profile cylinder<br />
• With 5 pin tumblers<br />
• Follower adjustable in 8 positions<br />
Supplied with<br />
1 Single profile cylinder<br />
3 Steel keys, nickel plated<br />
1 Fastening screw<br />
Length A Length B Length C Brass, nickel plated Brass, polished<br />
27.5 mm 10 mm 37.5 mm 916.00.601 916.00.651<br />
31.5 mm 10 mm 41.5 mm 916.00.602 916.00.652<br />
35.5 mm 10 mm 45.5 mm 916.00.603 916.00.653<br />
40.5 mm 10 mm 50.5 mm 916.00.604 916.00.654<br />
Double profile cylinder<br />
• With 5 pin tumblers<br />
Supplied with<br />
1 Double profile cylinder<br />
3 Steel keys, nickel plated<br />
1 Fastening screw<br />
10<br />
Length A Length B Length C Brass, nickel plated Brass, polished<br />
27.5 mm 27.5 mm 55 mm 916.00.001 916.00.051<br />
31.5 mm 59 mm 916.00.002 916.00.052<br />
35.5 mm 63 mm 916.00.003 916.00.053<br />
40.5 mm 68 mm 916.00.004 916.00.054<br />
45.5 mm 73 mm 916.00.005 916.00.055<br />
31.5 mm 31.5 mm 63 mm 916.00.007 916.00.057<br />
35.5 mm 67 mm 916.00.008 916.00.058<br />
40.5 mm 72 mm 916.00.009 916.00.059<br />
45.5 mm 77 mm 916.00.010 916.00.060<br />
50.5 mm 82 mm 916.00.011 916.00.061<br />
35.5 mm 35.5 mm 71 mm 916.00.013 916.00.063<br />
40.5 mm 76 mm 916.00.014 916.00.064<br />
45.5 mm 81 mm 916.00.015 916.00.065<br />
50.5 mm 86 mm 916.00.016 916.00.066<br />
40.5 mm 40.5 mm 81 mm 916.00.018 916.00.068<br />
45.5 mm 86 mm 916.00.019 916.00.069<br />
50.5 mm 91 mm 916.00.020 916.00.070<br />
We reserve the right to alter specifications without notice (HMA Basic 2011/12).<br />
HMA 10.44<br />
New products <strong>and</strong> systems: www.hafele.com
Architectural Hardware<br />
<strong>Locking</strong> <strong>and</strong> <strong>Security</strong><br />
Double profile cylinder with thumbturn<br />
Brass, nickel plated, aluminium thumbturn<br />
Brass, nickel plated, stainless steel thumbturn<br />
Brass, polished<br />
• With 5 pin tumblers<br />
• One side locking function<br />
• One side thumbturn<br />
Supplied with<br />
1 Double profile cylinder with thumbturn<br />
3 Steel keys, nickel plated<br />
1 Fastening screw<br />
Length A Length B Length C <br />
27.5 mm 27.5 mm 55 mm 916.01.001 916.08.661 916.01.051<br />
31.5 mm 59 mm 916.01.022 916.08.662 916.01.072<br />
31.5 mm 31.5 mm 63 mm 916.01.007 916.08.672 916.01.057<br />
35.5 mm 67 mm 916.01.028 916.08.673 916.01.078<br />
35.5 mm 35.5 mm 71 mm 916.01.013 916.08.683 916.01.063<br />
40.5 mm 40.5 mm 81 mm 916.01.018 916.08.694 916.01.068<br />
45.5 mm 45.5 mm 91 mm 916.08.505 916.08.705 916.08.905<br />
50.5 mm 50.5 mm 101 mm 916.08.516 916.08.716 916.08.916<br />
Double profile cylinder with emergency slot<br />
We reserve the right to alter specifications without notice (HMA Basic 2011/12).<br />
Brass, nickel plated, aluminium thumbturn<br />
Brass, nickel plated, stainless steel thumbturn<br />
Brass, polished<br />
• One side emergency slot<br />
• Other side thumbturn<br />
• Suitable for toilet doors<br />
Supplied with<br />
1 Double profile cylinder with emergency slot<br />
1 Fastening screw<br />
Length A Length B Length C <br />
27.5 mm 27.5 mm 55 mm 916.08.521 916.08.721 916.08.921<br />
27.5 mm 31.5 mm 59 mm 916.08.522 916.08.722 916.08.922<br />
31.5 mm 31.5 mm 63 mm 916.08.523 916.08.723 916.08.923<br />
31.5 mm 35.5 mm 67 mm 916.08.524 916.08.724 916.08.924<br />
35.5 mm 35.5 mm 71 mm 916.08.525 916.08.725 916.08.925<br />
40.5 mm 40.5 mm 81 mm 916.08.526 916.08.726 916.08.926<br />
45.5 mm 45.5 mm 91 mm 916.08.527 916.08.727 916.08.927<br />
50.5 mm 50.5 mm 101 mm 916.08.528 916.08.728 916.08.928<br />
10<br />
New products <strong>and</strong> systems: www.hafele.com<br />
HMA 10.45
Architectural Hardware<br />
<strong>Locking</strong> <strong>and</strong> <strong>Security</strong><br />
Blind single profile cylinder<br />
• Blank on one side<br />
Length A Length B Length C Brass, nickel plated<br />
27.5 mm 10 mm 37.5 mm 916.09.980<br />
31.5 mm 10 mm 41.5 mm 916.09.981<br />
Blind double profile cylinder<br />
• Blank on both sides<br />
Length A Length B Length C Brass nickel plated<br />
27.5 mm 27.5 mm 55 mm 916.09.982<br />
31.5 mm 31.5 mm 63 mm 916.09.983<br />
35.5 mm 35.5 mm 71 mm 916.09.984<br />
40.5 mm 40.5 mm 81 mm 916.09.985<br />
Construction site key<br />
10<br />
• Square pin key 6/7/8 mm<br />
• Allen key 3 mm<br />
• Conical square spindle from 6 – 10 mm<br />
• Follower for locks with PC-aperture<br />
• With double-side scale (22 – 75 mm <strong>and</strong> 25 – 75 mm)<br />
to measure the cylinder length<br />
• Bottle opener<br />
Material, Finish<br />
Cat. No.<br />
Zinc alloy, nickel plated 916.99.013<br />
• Conical square spindle from 6 – 10 mm<br />
• Follower for locks with PC-aperture<br />
• With scale (35 – 70 mm) to measure the cylinder length<br />
Material<br />
Cat. No.<br />
Grey plastic 916.99.011<br />
We reserve the right to alter specifications without notice (HMA Basic 2011/12).<br />
HMA 10.46<br />
New products <strong>and</strong> systems: www.hafele.com
Architectural Hardware<br />
<strong>Locking</strong> <strong>and</strong> <strong>Security</strong><br />
Master key system information<br />
Where two or more individual cylinders are not only locked by an individual key, but also by superior keys, a so-called master key system is<br />
created. The application of master key systems reaches i. e. from apartment blocks to office complexes. Häfele supplies master key systems in<br />
all sizes for any type of cylinder, on request also with patented key profiles as well as with many special features. Many customers asked for<br />
master key systems made in Germany but criticize the long delivery times which you have with made goods from Germany. For this reason<br />
Häfele Thail<strong>and</strong> developed their own master key system production. Our master key systems SD <strong>and</strong> PSM are completely produced in Germany<br />
<strong>and</strong> only the last steps of to cut the key are done in Thail<strong>and</strong>. With this service Häfele Thail<strong>and</strong> is able to offer their customer master key<br />
systems with German quality in short delivery times. However, the Häfele service not only comprises the delivery. Häfele has experts for hardware<br />
technology, master key systems <strong>and</strong> for any questions relating to individual cylinders. The service reaches from initial assistance in the<br />
planning phase to the creation of appropriate master key plans.<br />
Differences are made between the following master key systems:<br />
MK<br />
MK-System (Master Key System)<br />
Example: Buildings with four store rooms<br />
Each master key cylinder can be locked with the master<br />
key as well as the individual key allocated to it.<br />
S S S S<br />
Area of operation<br />
Master key /<br />
Managing Director<br />
S<br />
MK<br />
Store room<br />
Master key<br />
Key No.<br />
MK<br />
1 – 4 Individual key store rooms<br />
<strong>Door</strong> or room<br />
Cyl. <strong>and</strong><br />
key No.<br />
Number of<br />
cylinders<br />
Cat.<br />
No.<br />
Length A<br />
Length B<br />
Number<br />
of keys<br />
5<br />
Store 1 1 1 916l ..l ... 31.5 mm 31.5 mm 3<br />
Store 2 2 1 916l ..l ... 31.5 mm 31.5 mm 3<br />
Store 3 3 1 916l ..l ... 31.5 mm 31.5 mm 3<br />
Store 4 4 1 916l ..l ... 31.5 mm 31.5 mm 3<br />
Superior keys ><br />
GMK-System (Gr<strong>and</strong> Master Key System)<br />
Example: office Buildings<br />
Each master key cylinder can be locked with the master<br />
key as well as the individual key allocated to it.<br />
P<br />
Plant room<br />
E<br />
EDP<br />
We reserve the right to alter specifications without notice (HMA Basic 2011/12).<br />
GMK Gr<strong>and</strong> master key<br />
MK Master key<br />
SMK Sub master key<br />
1 – 5 Plant room, EDP room<br />
6 – 10 General master key<br />
<strong>Door</strong> or room<br />
Cyl. <strong>and</strong><br />
key No.<br />
Number of<br />
cylinders<br />
Cat.<br />
No.<br />
Length A<br />
Length B<br />
Number<br />
of keys<br />
Plant room 1 1 1 916l ..l ... 31.5 mm 31.5 mm 3<br />
Plant room 2 2 1 916l ..l ... 31.5 mm 31.5 mm 3<br />
Plant room 3 3 1 916l ..l ... 31.5 mm 31.5 mm 3<br />
Plant room 4 4 1 916l ..l ... 31.5 mm 31.5 mm 3<br />
Plant room 5 5 1 916l ..l ... 31.5 mm 31.5 mm 3<br />
EDP 6 6 1 916l ..l ... 31.5 mm 31.5 mm 3<br />
EDP 7 7 1 916l ..l ... 31.5 mm 31.5 mm 3<br />
EDP 8 8 1 916l ..l ... 31.5 mm 31.5 mm 3<br />
EDP 9 9 1 916l ..l ... 31.5 mm 31.5 mm 3<br />
EDP 10 10 1 916l ..l ... 31.5 mm 31.5 mm 3<br />
Area of operation<br />
Key No.<br />
Superior keys ><br />
Managing Director / Fire brigade<br />
Plant manager<br />
Departmental manager EDP<br />
Plant office manager<br />
Plant sales department<br />
Office manager EDP<br />
Sales department EDP<br />
GMK<br />
MK1<br />
MK2<br />
SMK1<br />
SMK2<br />
SMK3<br />
SMK4<br />
5<br />
3<br />
3<br />
2<br />
2<br />
2<br />
2<br />
10<br />
New products <strong>and</strong> systems: www.hafele.com<br />
HMA 10.47
Architectural Hardware<br />
<strong>Locking</strong> <strong>and</strong> <strong>Security</strong><br />
Master key system information<br />
EM system<br />
A profile for simple <strong>and</strong> small master key system in residential<br />
projects.<br />
• Each locking side contains 5 pin tumblers<br />
• Keys made of brass plated<br />
SD system<br />
A profile for simple <strong>and</strong> small master key system in residential<br />
projects.<br />
• Each locking side contains 5 pin tumblers<br />
• The first core pin are made of hardened steel<br />
• Anti picking device complying with DIN 18 252, has been<br />
developed in a special form with 2 mushroom housing pins.<br />
• Very close process tolerances - for safe functions<br />
• Wear resisting key of steel plated<br />
PSM system<br />
A profile series rich in variation with a multitude of different possible<br />
key ways. For complex <strong>and</strong> large key systems in commercial<br />
projects.<br />
• Each locking side contains 5 pin tumblers of wear <strong>and</strong> tear<br />
resistant copper-nickel-zinc-alloy.<br />
• The first core pin are made of hardened steel<br />
• Anti picking device complying with DIN 18 252, has been<br />
developed in a special form with 2 mushroom housing pins.<br />
• Sturdy, wear resisting keys of nickel silver material<br />
• A Guide groove runs over the entire cylinder core <strong>and</strong> ensure<br />
complete power transfer of the key turns <strong>and</strong> prevents<br />
the key breaking<br />
• The keys are restricted <strong>and</strong> only available by Häfele Thail<strong>and</strong><br />
• Supplied with security card for absolute key controlling<br />
10<br />
Profile cylinder system<br />
1 Core<br />
2 Core pin<br />
3 <strong>Locking</strong> pin with spring<br />
4 Housing pin with spring<br />
5 Cylinder housing<br />
We reserve the right to alter specifications without notice (HMA Basic 2011/12).<br />
HMA 10.48<br />
New products <strong>and</strong> systems: www.hafele.com
Architectural Hardware<br />
<strong>Locking</strong> <strong>and</strong> <strong>Security</strong><br />
DT Lite Residential<br />
Note<br />
• From out side the door can be opened by normal, privileged,<br />
Each set of article number consists of electronic front <strong>and</strong> rear<br />
toggled key cards or mechanical key during emergencies<br />
module, cover plate <strong>and</strong> striking plate. But It is not including<br />
• Automatic battery saving<br />
electronic mortise lock, cylinder <strong>and</strong> mounting screws.<br />
• Battery-life: At least 10,000 openings<br />
• Low battery alarm signal<br />
• Reading range: 0 – 40 mm<br />
• Stable reading RFID (Radio Frequency Identification) technology<br />
• Fast opening process<br />
• For door thickness: 40 – 65 mm<br />
C-Shaped h<strong>and</strong>le<br />
J-Shaped h<strong>and</strong>le<br />
Finish Right h<strong>and</strong> Left h<strong>and</strong><br />
Chrome polished, PVD 917.80.362 917.80.352<br />
Chrome matt, PVD 917.80.364 917.80.354<br />
Brass polished, PVD 917.80.368 917.80.358<br />
Brass matt, PVD 917.80.365 917.80.355<br />
Finish Right h<strong>and</strong> Left h<strong>and</strong><br />
Chrome polished, PVD 917.80.312 917.80.302<br />
Chrome matt, PVD 917.80.314 917.80.304<br />
Brass polished, PVD 917.80.318 917.80.308<br />
Brass matt, PVD 917.80.315 917.80.305<br />
We reserve the right to alter specifications without notice (HMA Basic 2011/12).<br />
Electronic mortise lock<br />
Version<br />
Cat. No.<br />
RH Inward Model 917.81.001<br />
RH Outward Model 917.81.011<br />
LH Inward Model 917.81.000<br />
LH Outward Model 917.81.010<br />
10<br />
New products <strong>and</strong> systems: www.hafele.com<br />
HMA 10.49
Architectural Hardware<br />
<strong>Locking</strong> <strong>and</strong> <strong>Security</strong><br />
Panic exit device<br />
Area of application: For rebated or flush, single or double,<br />
wooden or steel doors<br />
Suitable for: Fire resistant <strong>and</strong> smoke control doors<br />
<strong>Door</strong> width: 840 – 914 mm<br />
<strong>Door</strong> thickness: 43.9 – 50.8 mm<br />
Mounting: For DIN left <strong>and</strong> DIN right h<strong>and</strong> use<br />
Function<br />
Opening of door from inside: By pushing the touchbar<br />
Opening of door from outside (optional): By activating the lever h<strong>and</strong>le.<br />
Key locks or unlocks lever h<strong>and</strong>les (ANSI cipher bit function)<br />
Product components for single doors<br />
Inside:<br />
- 1 Touchbar <br />
Outside:<br />
- 1 Lever h<strong>and</strong>le with round rosette <br />
Inside:<br />
- 1 Touchbar with vertical locking rod <br />
Outside:<br />
- 1 Lever h<strong>and</strong>le with round rosette <br />
Product components for double doors<br />
10<br />
Inside:<br />
- Action leaf: 1 Touchbar <br />
- Inactive leaf: 1 Touchbar with vertical locking rod <br />
<strong>and</strong> 1 striking plate <br />
Outside:<br />
- 1 Lever h<strong>and</strong>le with round rosette <br />
Touchbar<br />
Inside:<br />
- Action <strong>and</strong> inactive leaf: Touchbar with vertical locking rod <br />
Outside:<br />
- 1 Lever h<strong>and</strong>le with round rosette <br />
Supplied with<br />
1 Touchbar<br />
1 Striking plate<br />
Cat. No.<br />
Touchbar 911.56.036<br />
Packing: 1 pc.<br />
We reserve the right to alter specifications without notice (HMA Basic 2011/12).<br />
HMA 10.50<br />
New products <strong>and</strong> systems: www.hafele.com
Architectural Hardware<br />
<strong>Locking</strong> <strong>and</strong> <strong>Security</strong><br />
Touchbar with vertical locking rod<br />
Cat. No.<br />
Touchbar with vertical locking rod 911.56.037<br />
Packing: 1 pc.<br />
Striking plate<br />
Area of application<br />
For double doors inside: Active leaf with touchbar ,<br />
inactive leaf with touchbar with vertical locking rod <br />
We reserve the right to alter specifications without notice (HMA Basic 2011/12).<br />
Lever h<strong>and</strong>le with round rosette<br />
Cat. No.<br />
Striking plate 911.56.024<br />
Packing: 1 pc.<br />
Cat. No.<br />
Lever h<strong>and</strong>le with round rosette 911.56.038<br />
Packing: 1 pc.<br />
10<br />
New products <strong>and</strong> systems: www.hafele.com<br />
HMA 10.51