You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Folding lashing ring<br />
with up to 6,000 kg<br />
tensile force integrated<br />
in the external frame,<br />
over the external frame<br />
(optional)<br />
Lashing points,<br />
stanchion pockets<br />
and folding<br />
outriggers in the<br />
external frame<br />
(optional)<br />
Height-adjustable<br />
drawbar as a result<br />
of the three fitting<br />
possibilities<br />
STANDARD EQUIPMENT<br />
Convincing arguments:<br />
The flatbed turntable trailer HTD 30 straight<br />
by <strong>Humbaur</strong><br />
• Axle unit: SAF flatbed axles with closed S-cam<br />
brake; air suspension front and rear, rear axle unit<br />
with lifting and lowering facility (only in combination<br />
with air suspension)<br />
• Braking system: Conforming to EU guidelines with<br />
EBS 4S / 3M and spring-loaded parking brake;<br />
connecting hoses with non-interchangeable<br />
coupling heads<br />
• Electrics: 24 V system (lighting / EBS); splash proof<br />
and vibration-damped lights; 15-pin connection<br />
plug (lighting); 7-pin connection plug (EBS);<br />
• Bogie and towing device: Bogie in solid welded<br />
design with low-maintenance ball slewing ring<br />
and three different drawbar mounting heights;<br />
8° inclined drawbar with Ø 40 mm towing eye<br />
• Chassis and frame: Main frame and external frame<br />
made of high-strength rine-grain steel with full<br />
width cross beams in solid welded design for the<br />
highest levels of stability and carrying capacity;<br />
Wheel cut-outs over the rear wheels, corners<br />
chamfered at the front; Climbing bars on the external<br />
frame of the rear incline for maximum safety when<br />
loading and unloading; external and main frames in<br />
area of rotating ring; 10 t lashing points, in 4 pairs,<br />
recessed in the platform floor; additional lashing<br />
options integrated in the external frame<br />
• Floor covering: Platform floor made from an approx.<br />
50 mm thick softwood covering; stud plate in area of<br />
rear wheels and on the bogie platform<br />
• Ramps: One-piece hot-dip galvanised drive-up ramps<br />
(length approx. 3,000 mm, width approx. 750 mm)<br />
with direct-acting standing lifting springs for the<br />
easiest of operation; Ramp covered with softwood<br />
laid in the longitudinal direction; Ramp retainer<br />
linkage with securing lock for optimum safety<br />
• Paintwork: Chassis frame with nano-ceramic<br />
cathodic dip coating (KTL) and single-colour top<br />
coat in RAL colour of your choice; as an option<br />
we offer a variant that is hot-dip galvanised;<br />
silver painted rims<br />
Illustrations may show optional extras / products are subject to continuous technical alterations<br />
7