You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
18<br />
>> Set up BeoLab <strong>3500</strong><br />
To fasten BeoLab <strong>3500</strong> on a<br />
solid wall:<br />
– Mark and drill the holes in the<br />
56 cm<br />
22"<br />
56 cm<br />
22"<br />
wall, using the bracket as a<br />
template.<br />
– Fasten the bracket to the wall. Use<br />
the correct size and type of screws<br />
and wall anchors, taking into<br />
account the construction and<br />
A<br />
condition of the wall. Use three<br />
screws and wall anchors each with<br />
a minimum load rating of 13 kg<br />
(29 lbs). Level the bracket before<br />
tightening the screws (A).<br />
– Detach the grey plastic cover (B)<br />
from the wall mount and connect<br />
the cables.<br />
– Hang BeoLab <strong>3500</strong> on the bracket<br />
B<br />
C<br />
C<br />
by inserting the two plastic pegs<br />
into the holes on the upper edge<br />
of the wall bracket.<br />
– Secure BeoLab <strong>3500</strong> to the bracket<br />
with the two screws (C), and<br />
attach the grey plastic cover again<br />
(B).