Capacitors for Electronic Equipment
Capacitors for Electronic Equipment
Capacitors for Electronic Equipment
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
WIMA Radio Interference<br />
Suppression <strong>Capacitors</strong> <strong>for</strong><br />
Overvoltage Protection<br />
WIMA MKP-X2<br />
WIMA MKP-X2 R<br />
WIMA MKP-Y2<br />
WIMA MP 3-X2<br />
WIMA MP 3-X1<br />
WIMA MP 3-Y2<br />
WIMA MP 3R-Y2<br />
Depending on the application, radio<br />
interference suppression capacitors remain<br />
on the mains <strong>for</strong> an uninterrupted period<br />
of 10, 20 or more years. They need not<br />
only satisfy EMC requirements in suppressing<br />
outgoing interference from an application<br />
but they also have to protect the<br />
application from incoming power surges.<br />
Hence careful selection of these components<br />
is essential.<br />
The special feature of WIMA Polypropylene<br />
RFI capacitors are the high capacitance<br />
values at smaller case sizes compared<br />
to metallized paper capacitors,<br />
being available with capacitances from<br />
1000 pF through 10 mF at AC voltages of<br />
275 VAC, 300 VAC and 400 VAC <strong>for</strong><br />
class X2 and Y2. Based on the dielectric<br />
used they are highly cost-effective.<br />
WIMA metallized paper capacitors are<br />
neither actively nor passively flammable.<br />
The components are resin impregnated<br />
under vacuum and encapsulated with<br />
self-extinguishing cast resin. Thanks to the<br />
good oxidation behaviour of the paper<br />
dielectric, they have outstanding selfhealing<br />
properties even with high energy<br />
pulses. The capacitors are specified <strong>for</strong><br />
temperatures up to 110) C and are available<br />
<strong>for</strong> class X1, X2 and Y2 applications.<br />
Class X capacitors are connected between<br />
phase and neutral or phase and phase<br />
conductors. Class Y capacitors have<br />
an increased degree of electrical and<br />
mechanical safety and are connected, <strong>for</strong><br />
example, between phase conductors and<br />
earthed casing, and thus by-pass operating<br />
insulation.<br />
WIMA RFI capacitors with metallized<br />
paper dielectric are available with capacitances<br />
from 1000 pF through 1.0 mF and<br />
voltage ratings of 250 VAC, 275 VAC,<br />
300 VAC, 440 VAC and 500 VAC.<br />
The specified rated AC voltage takes into<br />
account a rise of the mains voltage of<br />
up to 10 % above the nominal value, in<br />
accordance with IEC 60384-14.<br />
The components are environmentally<br />
compatible with the RoHS 2011/65/EC<br />
regulations of the European Union.<br />
11.12<br />
70